[Intel-gfx] [PATCH 5/5] drm/i915: Improve PCBR debug information

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Always print the final PCBR register value on both vlv and chv, and
also tell us whether the BIOS was a good citizen or not.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index e8a6f92..ef8e055 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5126,12 +5126,15 @@ static void cherryview_setup_pctx(struct drm_device *dev)
 
 	pcbr = I915_READ(VLV_PCBR);
 	if ((pcbr >> VLV_PCBR_ADDR_SHIFT) == 0) {
+		DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
 		paddr = (dev_priv->mm.stolen_base +
 			 (gtt->stolen_size - pctx_size));
 
 		pctx_paddr = (paddr & (~4095));
 		I915_WRITE(VLV_PCBR, pctx_paddr);
 	}
+
+	DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR));
 }
 
 static void valleyview_setup_pctx(struct drm_device *dev)
@@ -5157,6 +5160,8 @@ static void valleyview_setup_pctx(struct drm_device *dev)
 		goto out;
 	}
 
+	DRM_DEBUG_DRIVER("BIOS didn't set up PCBR, fixing up\n");
+
 	/*
 	 * From the Gunit register HAS:
 	 * The Gfx driver is expected to program this register and ensure
@@ -5175,6 +5180,7 @@ static void valleyview_setup_pctx(struct drm_device *dev)
 	I915_WRITE(VLV_PCBR, pctx_paddr);
 
 out:
+	DRM_DEBUG_DRIVER("PCBR: 0x%08x\n", I915_READ(VLV_PCBR));
 	dev_priv->vlv_pctx = pctx;
 }
 
@@ -5366,8 +5372,6 @@ static void cherryview_enable_rps(struct drm_device *dev)
 	/* For now we assume BIOS is allocating and populating the PCBR  */
 	pcbr = I915_READ(VLV_PCBR);
 
-	DRM_DEBUG_DRIVER("PCBR offset : 0x%x\n", pcbr);
-
 	/* 3: Enable RC6 */
 	if ((intel_enable_rc6(dev) & INTEL_RC6_ENABLE) &&
 						(pcbr >> VLV_PCBR_ADDR_SHIFT))
-- 
2.0.4