[Intel-gfx] [PATCH v2 4/5] drm/i915: Make updating pipe without modeset atomic.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Thu Aug 27 07:06:46 PDT 2015
Op 27-08-15 om 15:58 schreef Ville Syrjälä:
> On Thu, Aug 27, 2015 at 03:44:05PM +0200, Maarten Lankhorst wrote:
>> Instead of doing a hack during primary plane commit the state
>> is updated during atomic evasion. It handles differences in
>> pipe size and the panel fitter.
>>
>> This is continuing on top of Daniel's work to make faster
>> modesets atomic, and not yet enabled by default.
>>
>> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>> ---
>> drivers/gpu/drm/i915/intel_atomic.c | 2 +-
>> drivers/gpu/drm/i915/intel_display.c | 110 ++++++++++++++++++++++-------------
>> drivers/gpu/drm/i915/intel_drv.h | 2 +
>> 3 files changed, 72 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
>> index 9336e8030980..8287b81287a0 100644
>> --- a/drivers/gpu/drm/i915/intel_atomic.c
>> +++ b/drivers/gpu/drm/i915/intel_atomic.c
>> @@ -98,8 +98,8 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
>> return NULL;
>>
>> __drm_atomic_helper_crtc_duplicate_state(crtc, &crtc_state->base);
>> -
>> crtc_state->base.crtc = crtc;
>> + crtc_state->update_pipe = false;
>>
>> return &crtc_state->base;
>> }
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index 7b5dfe2f7b2d..d3874a68cdb9 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -108,6 +108,9 @@ static void skl_init_scalers(struct drm_device *dev, struct intel_crtc *intel_cr
>> struct intel_crtc_state *crtc_state);
>> static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
>> int num_connectors);
>> +static void skylake_pfit_enable(struct intel_crtc *crtc);
>> +static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
>> +static void ironlake_pfit_enable(struct intel_crtc *crtc);
>> static void intel_modeset_setup_hw_state(struct drm_device *dev);
>>
>> typedef struct {
>> @@ -3305,14 +3308,20 @@ static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
>> return pending;
>> }
>>
>> -static void intel_update_pipe_size(struct intel_crtc *crtc)
>> +static void intel_update_pipe_config(struct intel_crtc *crtc,
>> + struct intel_crtc_state *old_crtc_state)
>> {
>> struct drm_device *dev = crtc->base.dev;
>> struct drm_i915_private *dev_priv = dev->dev_private;
>> - const struct drm_display_mode *adjusted_mode;
>> + struct intel_crtc_state *pipe_config =
>> + to_intel_crtc_state(crtc->base.state);
>>
>> - if (!i915.fastboot)
>> - return;
>> + /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
>> + crtc->base.mode = crtc->base.state->mode;
>> +
>> + DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
>> + old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
>> + pipe_config->pipe_src_w, pipe_config->pipe_src_h);
>>
>> if (HAS_DDI(dev))
>> intel_set_pipe_csc(&crtc->base);
>> @@ -3324,27 +3333,26 @@ static void intel_update_pipe_size(struct intel_crtc *crtc)
>> * fastboot case, we'll flip, but if we don't update the pipesrc and
>> * pfit state, we'll end up with a big fb scanned out into the wrong
>> * sized surface.
>> - *
>> - * To fix this properly, we need to hoist the checks up into
>> - * compute_mode_changes (or above), check the actual pfit state and
>> - * whether the platform allows pfit disable with pipe active, and only
>> - * then update the pipesrc and pfit state, even on the flip path.
>> */
>>
>> - adjusted_mode = &crtc->config->base.adjusted_mode;
>> -
>> I915_WRITE(PIPESRC(crtc->pipe),
>> - ((adjusted_mode->crtc_hdisplay - 1) << 16) |
>> - (adjusted_mode->crtc_vdisplay - 1));
>> - if (!crtc->config->pch_pfit.enabled &&
>> - (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
>> - intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
>> - I915_WRITE(PF_CTL(crtc->pipe), 0);
>> - I915_WRITE(PF_WIN_POS(crtc->pipe), 0);
>> - I915_WRITE(PF_WIN_SZ(crtc->pipe), 0);
>> + ((pipe_config->pipe_src_w - 1) << 16) |
>> + (pipe_config->pipe_src_h - 1));
>> +
>> + /* on skylake this is done by detaching scalers */
>> + if (INTEL_INFO(dev)->gen == 9) {
>> + skl_detach_scalers(crtc);
>> +
>> + if (pipe_config->pch_pfit.enabled)
>> + skylake_pfit_enable(crtc);
>> + }
>> + else if (INTEL_INFO(dev)->gen < 9 &&
>> + HAS_PCH_SPLIT(dev)) {
>> + if (pipe_config->pch_pfit.enabled)
>> + ironlake_pfit_enable(crtc);
>> + else if (old_crtc_state->pch_pfit.enabled)
>> + ironlake_pfit_disable(crtc, true);
>> }
>> - crtc->config->pipe_src_w = adjusted_mode->crtc_hdisplay;
>> - crtc->config->pipe_src_h = adjusted_mode->crtc_vdisplay;
>> }
>>
>> static void intel_fdi_normal_train(struct drm_crtc *crtc)
>> @@ -5003,7 +5011,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
>> }
>> }
>>
>> -static void ironlake_pfit_disable(struct intel_crtc *crtc)
>> +static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force)
>> {
>> struct drm_device *dev = crtc->base.dev;
>> struct drm_i915_private *dev_priv = dev->dev_private;
>> @@ -5011,7 +5019,7 @@ static void ironlake_pfit_disable(struct intel_crtc *crtc)
>>
>> /* To avoid upsetting the power well on haswell only disable the pfit if
>> * it's in use. The hw state code will make sure we get this right. */
>> - if (crtc->config->pch_pfit.enabled) {
>> + if (force || crtc->config->pch_pfit.enabled) {
>> I915_WRITE(PF_CTL(pipe), 0);
>> I915_WRITE(PF_WIN_POS(pipe), 0);
>> I915_WRITE(PF_WIN_SZ(pipe), 0);
>> @@ -5038,7 +5046,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
>>
>> intel_disable_pipe(intel_crtc);
>>
>> - ironlake_pfit_disable(intel_crtc);
>> + ironlake_pfit_disable(intel_crtc, false);
>>
>> if (intel_crtc->config->has_pch_encoder)
>> ironlake_fdi_disable(crtc);
>> @@ -5101,7 +5109,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
>> if (INTEL_INFO(dev)->gen == 9)
>> skylake_scaler_disable(intel_crtc);
>> else if (INTEL_INFO(dev)->gen < 9)
>> - ironlake_pfit_disable(intel_crtc);
>> + ironlake_pfit_disable(intel_crtc, false);
>> else
>> MISSING_CASE(INTEL_INFO(dev)->gen);
>>
>> @@ -12246,7 +12254,6 @@ static bool intel_fuzzy_clock_check(int clock1, int clock2)
>> base.head) \
>> if (mask & (1 <<(intel_crtc)->pipe))
>>
>> -
>> static bool
>> intel_compare_m_n(unsigned int m, unsigned int n,
>> unsigned int m2, unsigned int n2,
>> @@ -12467,8 +12474,16 @@ intel_pipe_config_compare(struct drm_device *dev,
>> DRM_MODE_FLAG_NVSYNC);
>> }
>>
>> - PIPE_CONF_CHECK_I(pipe_src_w);
>> - PIPE_CONF_CHECK_I(pipe_src_h);
>> + if (!adjust) {
>> + PIPE_CONF_CHECK_I(pipe_src_w);
>> + PIPE_CONF_CHECK_I(pipe_src_h);
>> +
>> + PIPE_CONF_CHECK_I(pch_pfit.enabled);
>> + if (current_config->pch_pfit.enabled) {
>> + PIPE_CONF_CHECK_I(pch_pfit.pos);
>> + PIPE_CONF_CHECK_I(pch_pfit.size);
>> + }
>> + }
> What's this hack now? Aren't you computing the correct config or why do
> you need to skip the state check?
>
This is not a hack but intentional. This function is called with adjust=true when comparing the state
to see if a full blown modeset is needed or not. Because intel_update_pipe_config can modify
pch_pfit and pipe_src* there's no need to consider it when doing a modeset.
But you do need the true values, or intel_update_pipe_config will do the wrong thing.
~Maarten
More information about the Intel-gfx
mailing list