[Intel-gfx] [PATCH 6/7] drm/i915/skl: Updated the 'i915_frequency_info' debugs function

akash.goel at intel.com akash.goel at intel.com
Fri Feb 6 06:56:37 PST 2015


From: Akash Goel <akash.goel at intel.com>

Added support for SKL in the 'i915_frequency_info' debugfs function

Signed-off-by: Akash Goel <akash.goel at intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 9af17fb..32c62a2 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -1089,7 +1089,7 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 		seq_printf(m, "Current P-state: %d\n",
 			   (rgvstat & MEMSTAT_PSTATE_MASK) >> MEMSTAT_PSTATE_SHIFT);
 	} else if (IS_GEN6(dev) || (IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) ||
-		   IS_BROADWELL(dev)) {
+		   IS_BROADWELL(dev) || IS_GEN9(dev)) {
 		u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
 		u32 rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS);
 		u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
@@ -1109,8 +1109,12 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 
 		reqf = I915_READ(GEN6_RPNSWREQ);
 		reqf &= ~GEN6_TURBO_DISABLE;
+		if (!IS_GEN9(dev))
+			reqf &= ~GEN6_TURBO_DISABLE;
 		if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 			reqf >>= 24;
+		else if IS_GEN9(dev)
+			reqf >>= 23;
 		else
 			reqf >>= 25;
 		reqf = intel_gpu_freq(dev_priv, reqf);
@@ -1128,6 +1132,8 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 		rpprevdown = I915_READ(GEN6_RP_PREV_DOWN);
 		if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 			cagf = (rpstat & HSW_CAGF_MASK) >> HSW_CAGF_SHIFT;
+		else if (IS_GEN9(dev))
+			cagf = (rpstat & GEN9_CAGF_MASK) >> GEN9_CAGF_SHIFT;
 		else
 			cagf = (rpstat & GEN6_CAGF_MASK) >> GEN6_CAGF_SHIFT;
 		cagf = intel_gpu_freq(dev_priv, cagf);
@@ -1152,7 +1158,7 @@ static int i915_frequency_info(struct seq_file *m, void *unused)
 			   pm_ier, pm_imr, pm_isr, pm_iir, pm_mask);
 		seq_printf(m, "GT_PERF_STATUS: 0x%08x\n", gt_perf_status);
 		seq_printf(m, "Render p-state ratio: %d\n",
-			   (gt_perf_status & 0xff00) >> 8);
+			   (gt_perf_status & (IS_GEN9(dev) ? 0x1ff00 : 0xff00)) >> 8);
 		seq_printf(m, "Render p-state VID: %d\n",
 			   gt_perf_status & 0xff);
 		seq_printf(m, "Render p-state limit: %d\n",
-- 
1.9.2



More information about the Intel-gfx mailing list