[Intel-gfx] [PATCH v2 4/5] drm/i915/skl: Updated the gen6_rps_limits function

akash.goel at intel.com akash.goel at intel.com
Wed Feb 18 06:01:16 PST 2015


From: Akash Goel <akash.goel at intel.com>

RP Interrupt Up/Down Frequency Limits register (A014) definition
has changed for SKL. Updated the gen6_rps_limits function as per that

v2: Renamed the function to intel_rps_limits (Chris)

Signed-off-by: Akash Goel <akash.goel at intel.com>
Reviewed-by: Lespiau, Damien <damien.lespiau at intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 78b4d62..e08a710 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3623,7 +3623,7 @@ static void ironlake_disable_drps(struct drm_device *dev)
  * ourselves, instead of doing a rmw cycle (which might result in us clearing
  * all limits and the gpu stuck at whatever frequency it is at atm).
  */
-static u32 gen6_rps_limits(struct drm_i915_private *dev_priv, u8 val)
+static u32 intel_rps_limits(struct drm_i915_private *dev_priv, u8 val)
 {
 	u32 limits;
 
@@ -3633,9 +3633,15 @@ static u32 gen6_rps_limits(struct drm_i915_private *dev_priv, u8 val)
 	 * the hw runs at the minimal clock before selecting the desired
 	 * frequency, if the down threshold expires in that window we will not
 	 * receive a down interrupt. */
-	limits = dev_priv->rps.max_freq_softlimit << 24;
-	if (val <= dev_priv->rps.min_freq_softlimit)
-		limits |= dev_priv->rps.min_freq_softlimit << 16;
+	if (IS_GEN9(dev_priv->dev)) {
+		limits = (dev_priv->rps.max_freq_softlimit * GEN9_FREQ_SCALER) << 23;
+		if (val <= dev_priv->rps.min_freq_softlimit)
+			limits |= (dev_priv->rps.min_freq_softlimit * GEN9_FREQ_SCALER) << 14;
+	} else {
+		limits = dev_priv->rps.max_freq_softlimit << 24;
+		if (val <= dev_priv->rps.min_freq_softlimit)
+			limits |= dev_priv->rps.min_freq_softlimit << 16;
+	}
 
 	return limits;
 }
@@ -3776,7 +3782,7 @@ static void gen6_set_rps(struct drm_device *dev, u8 val)
 	/* Make sure we continue to get interrupts
 	 * until we hit the minimum or maximum frequencies.
 	 */
-	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, gen6_rps_limits(dev_priv, val));
+	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, intel_rps_limits(dev_priv, val));
 	I915_WRITE(GEN6_PMINTRMSK, gen6_rps_pm_mask(dev_priv, val));
 
 	POSTING_READ(GEN6_RPNSWREQ);
-- 
1.9.2



More information about the Intel-gfx mailing list