[Intel-gfx] [RFC 5/6] drm/i915: Allow fb modifier to set framebuffer tiling

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>

Use the fb modifier if it was specified over object tiling mode.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 40 +++++++++++++++++++++++++++++-------
 1 file changed, 33 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e22afbe..ca69da0 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12671,6 +12671,20 @@ static const struct drm_framebuffer_funcs intel_fb_funcs = {
 	.create_handle = intel_user_framebuffer_create_handle,
 };
 
+static unsigned int
+intel_fb_modifier_to_tiling(u64 modifier)
+{
+	switch (modifier) {
+	case I915_FORMAT_MOD_X_TILED:
+		return I915_TILING_X;
+	default:
+	case I915_FORMAT_MOD_NONE:
+		break;
+	}
+
+	return I915_TILING_NONE;
+}
+
 static int intel_framebuffer_init(struct drm_device *dev,
 				  struct intel_framebuffer *intel_fb,
 				  struct drm_mode_fb_cmd2 *mode_cmd,
@@ -12678,11 +12692,23 @@ static int intel_framebuffer_init(struct drm_device *dev,
 {
 	int aligned_height;
 	int pitch_limit;
+	unsigned int tiling_mode = obj->tiling_mode;
 	int ret;
 
 	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
 
-	if (obj->tiling_mode == I915_TILING_Y) {
+	if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) {
+		tiling_mode =
+			intel_fb_modifier_to_tiling(mode_cmd->modifier[0]);
+		if (tiling_mode != obj->tiling_mode &&
+			obj->tiling_mode != I915_TILING_NONE) {
+			DRM_ERROR("Tiling modifier mismatch %u vs obj %u!\n",
+					tiling_mode, obj->tiling_mode);
+			return -EINVAL;
+		}
+	}
+
+	if (tiling_mode == I915_TILING_Y) {
 		DRM_DEBUG("hardware does not support tiling Y\n");
 		return -EINVAL;
 	}
@@ -12696,12 +12722,12 @@ static int intel_framebuffer_init(struct drm_device *dev,
 	if (INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev)) {
 		pitch_limit = 32*1024;
 	} else if (INTEL_INFO(dev)->gen >= 4) {
-		if (obj->tiling_mode)
+		if (tiling_mode)
 			pitch_limit = 16*1024;
 		else
 			pitch_limit = 32*1024;
 	} else if (INTEL_INFO(dev)->gen >= 3) {
-		if (obj->tiling_mode)
+		if (tiling_mode)
 			pitch_limit = 8*1024;
 		else
 			pitch_limit = 16*1024;
@@ -12711,12 +12737,12 @@ static int intel_framebuffer_init(struct drm_device *dev,
 
 	if (mode_cmd->pitches[0] > pitch_limit) {
 		DRM_DEBUG("%s pitch (%d) must be at less than %d\n",
-			  obj->tiling_mode ? "tiled" : "linear",
+			  tiling_mode ? "tiled" : "linear",
 			  mode_cmd->pitches[0], pitch_limit);
 		return -EINVAL;
 	}
 
-	if (obj->tiling_mode != I915_TILING_NONE &&
+	if (tiling_mode != I915_TILING_NONE && obj->stride &&
 	    mode_cmd->pitches[0] != obj->stride) {
 		DRM_DEBUG("pitch (%d) must match tiling stride (%d)\n",
 			  mode_cmd->pitches[0], obj->stride);
@@ -12771,7 +12797,7 @@ static int intel_framebuffer_init(struct drm_device *dev,
 		return -EINVAL;
 
 	aligned_height = intel_fb_align_height(dev, mode_cmd->height,
-					       obj->tiling_mode);
+					       tiling_mode);
 	/* FIXME drm helper for size checks (especially planar formats)? */
 	if (obj->base.size < aligned_height * mode_cmd->pitches[0])
 		return -EINVAL;
@@ -12779,7 +12805,7 @@ static int intel_framebuffer_init(struct drm_device *dev,
 	drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
 	intel_fb->obj = obj;
 	intel_fb->obj->framebuffer_references++;
-	intel_fb->tiling_mode = obj->tiling_mode;
+	intel_fb->tiling_mode = tiling_mode;
 
 	ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
 	if (ret) {
-- 
2.2.2