[Intel-gfx] [PATCH] drm/i915/chv: fix HW readout of the port PLL fractional divider

[Daniel Vetter]

On Thu, Jul 02, 2015 at 04:33:42PM +0300, Ville Syrjälä wrote:
> On Thu, Jul 02, 2015 at 02:29:58PM +0300, Imre Deak wrote:
> > Ville noticed that the PLL HW readout code parsed the fractional
> > divider value as if the fractional divider was always enabled. This may
> > result in a port clock state check mismatch if the preceeding modeset
> > disabled the fractional divider, but left a non-zero divider value in
> > the register.
> > 
> > Signed-off-by: Imre Deak <imre.deak at intel.com>
> 
> Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Queued for -fixes (with cc: stable), thanks for the patch.
-Daniel

> 
> > ---
> >  drivers/gpu/drm/i915/intel_display.c | 7 +++++--
> >  1 file changed, 5 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 5cc405d..2b7ebf1 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -8021,7 +8021,7 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc,
> >  	int pipe = pipe_config->cpu_transcoder;
> >  	enum dpio_channel port = vlv_pipe_to_channel(pipe);
> >  	intel_clock_t clock;
> > -	u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2;
> > +	u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
> >  	int refclk = 100000;
> >  
> >  	mutex_lock(&dev_priv->sb_lock);
> > @@ -8029,10 +8029,13 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc,
> >  	pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
> >  	pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
> >  	pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
> > +	pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
> >  	mutex_unlock(&dev_priv->sb_lock);
> >  
> >  	clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
> > -	clock.m2 = ((pll_dw0 & 0xff) << 22) | (pll_dw2 & 0x3fffff);
> > +	clock.m2 = (pll_dw0 & 0xff) << 22;
> > +	if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
> > +		clock.m2 |= pll_dw2 & 0x3fffff;
> >  	clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
> >  	clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
> >  	clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
> > -- 
> > 2.1.4
> 
> -- 
> Ville Syrjälä
> Intel OTC
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch