[Intel-gfx] [PATCH] drm/i915: PSR: Flush means invalidate + flush

Rodrigo Vivi rodrigo.vivi at intel.com
Wed Jul 8 16:21:31 PDT 2015


Since flush actually means invalidate + flush we need to force psr
exit on PSR flush.

On Core platforms there is no way to disable hw tracking and
do the pure sw tracking so we simulate it by fully disable psr and
reschedule a enable back.
So a good idea is to minimize sequential disable/enable in cases we
know that HW tracking like when flush has been originated by a flip.
Also flip had just invalidated it already.

It also uses origin to minimize the a bit the amount of
disable/enabled, mainly when flip already had invalidated.

With this patch in place it is possible to do a flush on dirty areas
properly in a following patch.

v2: Remove duplicated exit on HSW+Sprites as pointed out by Paulo.

Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
---
 drivers/gpu/drm/i915/intel_drv.h         |  3 ++-
 drivers/gpu/drm/i915/intel_frontbuffer.c |  2 +-
 drivers/gpu/drm/i915/intel_psr.c         | 40 +++++++++++++++++---------------
 3 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index beeb4d3..c863511 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1329,7 +1329,8 @@ void intel_psr_disable(struct intel_dp *intel_dp);
 void intel_psr_invalidate(struct drm_device *dev,
 			  unsigned frontbuffer_bits);
 void intel_psr_flush(struct drm_device *dev,
-		     unsigned frontbuffer_bits);
+		     unsigned frontbuffer_bits,
+		     enum fb_op_origin origin);
 void intel_psr_init(struct drm_device *dev);
 void intel_psr_single_frame_update(struct drm_device *dev,
 				   unsigned frontbuffer_bits);
diff --git a/drivers/gpu/drm/i915/intel_frontbuffer.c b/drivers/gpu/drm/i915/intel_frontbuffer.c
index cb5a6f0..e73d2ff0 100644
--- a/drivers/gpu/drm/i915/intel_frontbuffer.c
+++ b/drivers/gpu/drm/i915/intel_frontbuffer.c
@@ -128,7 +128,7 @@ void intel_frontbuffer_flush(struct drm_device *dev,
 		return;
 
 	intel_edp_drrs_flush(dev, frontbuffer_bits);
-	intel_psr_flush(dev, frontbuffer_bits);
+	intel_psr_flush(dev, frontbuffer_bits, origin);
 	intel_fbc_flush(dev_priv, frontbuffer_bits);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index d79ba58..6db043f 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -680,6 +680,7 @@ void intel_psr_invalidate(struct drm_device *dev,
  * intel_psr_flush - Flush PSR
  * @dev: DRM device
  * @frontbuffer_bits: frontbuffer plane tracking bits
+ * @origin: which operation caused the flush
  *
  * Since the hardware frontbuffer tracking has gaps we need to integrate
  * with the software frontbuffer tracking. This function gets called every
@@ -689,7 +690,7 @@ void intel_psr_invalidate(struct drm_device *dev,
  * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits.
  */
 void intel_psr_flush(struct drm_device *dev,
-		     unsigned frontbuffer_bits)
+		     unsigned frontbuffer_bits, enum fb_op_origin origin)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc;
@@ -707,24 +708,25 @@ void intel_psr_flush(struct drm_device *dev,
 	frontbuffer_bits &= INTEL_FRONTBUFFER_ALL_MASK(pipe);
 	dev_priv->psr.busy_frontbuffer_bits &= ~frontbuffer_bits;
 
-	/*
-	 * On Haswell sprite plane updates don't result in a psr invalidating
-	 * signal in the hardware. Which means we need to manually fake this in
-	 * software for all flushes, not just when we've seen a preceding
-	 * invalidation through frontbuffer rendering.
-	 */
-	if (IS_HASWELL(dev) &&
-	    (frontbuffer_bits & INTEL_FRONTBUFFER_SPRITE(pipe)))
-		intel_psr_exit(dev);
-
-	/*
-	 * On Valleyview and Cherryview we don't use hardware tracking so
-	 * any plane updates or cursor moves don't result in a PSR
-	 * invalidating. Which means we need to manually fake this in
-	 * software for all flushes, not just when we've seen a preceding
-	 * invalidation through frontbuffer rendering. */
-	if (frontbuffer_bits && !HAS_DDI(dev))
-		intel_psr_exit(dev);
+	if (HAS_DDI(dev)) {
+		/*
+		 * By definition every flush should mean invalidate + flush,
+		 * however on core platforms let's minimize the
+		 * disable/re-enable so we can avoid the invalidate when flip
+		 * originated the flush.
+		 */
+		if (frontbuffer_bits && origin != ORIGIN_FLIP)
+			intel_psr_exit(dev);
+	} else {
+		/*
+		 * On Valleyview and Cherryview we don't use hardware tracking
+		 * so any plane updates or cursor moves don't result in a PSR
+		 * invalidating. Which means we need to manually fake this in
+		 * software for all flushes.
+		 */
+		if (frontbuffer_bits)
+			intel_psr_exit(dev);
+	}
 
 	if (!dev_priv->psr.active && !dev_priv->psr.busy_frontbuffer_bits)
 		schedule_delayed_work(&dev_priv->psr.work,
-- 
2.1.0



More information about the Intel-gfx mailing list