[Intel-gfx] [PATCH 11/15] drm/i915: Implementation of GuC client

Dave Gordon david.s.gordon at intel.com
Mon Jun 15 11:36:29 PDT 2015


From: Alex Dai <yu.dai at intel.com>

A GuC client has its own doorbell and workqueue. It maintains the
doorbell cache line, process description object and work queue item.

A default guc_client is created for the i915 driver to use for
normal-priority in-order submission.

Issue: VIZ-4884
Signed-off-by: Alex Dai <yu.dai at intel.com>
Signed-off-by: Dave Gordon <david.s.gordon at intel.com>
---
 drivers/gpu/drm/i915/i915_guc_submission.c |  668 ++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_guc.h           |    5 +
 drivers/gpu/drm/i915/intel_guc_loader.c    |   10 +
 3 files changed, 683 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_guc_submission.c b/drivers/gpu/drm/i915/i915_guc_submission.c
index 4efb73a..487f295 100644
--- a/drivers/gpu/drm/i915/i915_guc_submission.c
+++ b/drivers/gpu/drm/i915/i915_guc_submission.c
@@ -27,6 +27,536 @@
 #include "intel_guc.h"
 
 /**
+ * DOC: GuC Client
+ *
+ * i915_guc_client:
+ * We use the term client to avoid confusion with contexts. A i915_guc_client is
+ * equivalent to GuC object guc_context_desc. This context descriptor is
+ * allocated from a pool of 1024 entries. Kernel driver will allocate doorbell
+ * and workqueue for it. Also the process descriptor (guc_process_desc), which
+ * is mapped to client space. So the client can write Work Item then ring the
+ * doorbell.
+ *
+ * To simplify the implementation, we allocate one gem object that contains all
+ * pages for doorbell, process descriptor and workqueue.
+ *
+ * The Scratch registers:
+ * There are 16 MMIO-based registers start from 0xC180. The kernel driver writes
+ * a value to the action register (SOFT_SCRATCH_0) along with any data. It then
+ * triggers an interrupt on the GuC via another register write (0xC4C8).
+ * Firmware writes a success/fail code back to the action register after
+ * processes the request. The kernel driver polls waiting for this update and
+ * then proceeds.
+ * See host2guc_action()
+ *
+ * Doorbells:
+ * Doorbells are interrupts to uKernel. A doorbell is a single cache line (QW)
+ * mapped into process space.
+ *
+ * Work Items:
+ * There are several types of work items that the host may place into a
+ * workqueue, each with its own requirements and limitations. Currently only
+ * WQ_TYPE_INORDER is needed to support legacy submission via GuC, which
+ * represents in-order queue. The kernel driver packs ring tail pointer and an
+ * ELSP context descriptor dword into Work Item.
+ * See guc_add_workqueue_item()
+ *
+ */
+
+/*
+ * Read GuC command/status register (SOFT_SCRATCH_0)
+ * Return true if it contains a response rather than a command
+ */
+static inline bool host2guc_get_response(struct drm_i915_private *dev_priv,
+					 u32 *status)
+{
+	u32 val = I915_READ(SOFT_SCRATCH(0));
+	*status = val;
+	return GUC2HOST_IS_RESPONSE(val);
+}
+
+static int host2guc_action(struct intel_guc *guc, u32 *data, u32 len)
+{
+	struct drm_i915_private *dev_priv = guc_to_i915(guc);
+	u32 status;
+	int i;
+	int ret;
+
+	if (WARN_ON(len < 1 || len > 15))
+		return -EINVAL;
+
+	spin_lock(&dev_priv->guc.host2guc_lock);
+
+	dev_priv->guc.action_count += 1;
+	dev_priv->guc.action_cmd = data[0];
+
+	for (i = 0; i < len; i++)
+		I915_WRITE(SOFT_SCRATCH(i), data[i]);
+
+	POSTING_READ(SOFT_SCRATCH(i - 1));
+
+	I915_WRITE(HOST2GUC_INTERRUPT, HOST2GUC_TRIGGER);
+
+	ret = wait_for_atomic(host2guc_get_response(dev_priv, &status), 10);
+	if (status != GUC2HOST_STATUS_SUCCESS) {
+		/* either GuC doesn't response, which is a TIMEOUT,
+		 * or a failure code is returned. */
+		if (ret != -ETIMEDOUT)
+			ret = -EIO;
+
+		DRM_ERROR("GUC: host2guc action 0x%X failed. ret=%d "
+				"status=0x%08X response=0x%08X\n",
+				data[0], ret, status,
+				I915_READ(SOFT_SCRATCH(15)));
+
+		dev_priv->guc.action_fail += 1;
+		dev_priv->guc.action_err = ret;
+	}
+	dev_priv->guc.action_status = status;
+
+	spin_unlock(&dev_priv->guc.host2guc_lock);
+
+	return ret;
+}
+
+/*
+ * Tell the GuC to allocate or deallocate a specific doorbell
+ */
+
+static int host2guc_allocate_doorbell(struct intel_guc *guc,
+				      struct i915_guc_client *client)
+{
+	u32 data[2];
+
+	data[0] = HOST2GUC_ACTION_ALLOCATE_DOORBELL;
+	data[1] = client->ctx_index;
+
+	return host2guc_action(guc, data, 2);
+}
+
+static int host2guc_release_doorbell(struct intel_guc *guc,
+				     struct i915_guc_client *client)
+{
+	u32 data[2];
+
+	data[0] = HOST2GUC_ACTION_DEALLOCATE_DOORBELL;
+	data[1] = client->ctx_index;
+
+	return host2guc_action(guc, data, 2);
+}
+
+/*
+ * Initialise, update, or clear doorbell data shared with the GuC
+ *
+ * These functions modify shared data and so need access to the mapped
+ * client object which contains the page being used for the doorbell
+ */
+
+static void guc_init_doorbell(struct intel_guc *guc,
+			      struct i915_guc_client *client)
+{
+	struct guc_doorbell_info *doorbell;
+	void *base;
+
+	base = kmap_atomic(i915_gem_object_get_page(client->client_obj, 0));
+	doorbell = base + client->doorbell_offset;
+
+	doorbell->db_status = 1;
+	doorbell->cookie = 0;
+
+	kunmap_atomic(base);
+}
+
+static int guc_ring_doorbell(struct i915_guc_client *gc)
+{
+	struct guc_process_desc *desc;
+	union guc_doorbell_qw db_cmp, db_exc, db_ret;
+	union guc_doorbell_qw *db;
+	void *base;
+	int attempt = 2, ret = -EAGAIN;
+
+	base = kmap_atomic(i915_gem_object_get_page(gc->client_obj, 0));
+	desc = base + gc->proc_desc_offset;
+
+	/* Update the tail so it is visible to GuC */
+	desc->tail = gc->wq_tail;
+
+	/* current cookie */
+	db_cmp.db_status = GUC_DOORBELL_ENABLED;
+	db_cmp.cookie = gc->cookie;
+
+	/* cookie to be updated */
+	db_exc.db_status = GUC_DOORBELL_ENABLED;
+	db_exc.cookie = gc->cookie + 1;
+	if (db_exc.cookie == 0)
+		db_exc.cookie = 1;
+
+	/* pointer of current doorbell cacheline */
+	db = base + gc->doorbell_offset;
+
+	while (attempt--) {
+		/* lets ring the doorbell */
+		db_ret.value_qw = atomic64_cmpxchg((atomic64_t *)db,
+			db_cmp.value_qw, db_exc.value_qw);
+
+		/* if the exchange was successfully executed */
+		if (db_ret.value_qw == db_cmp.value_qw) {
+			/* db was successfully rung */
+			gc->cookie = db_exc.cookie;
+			ret = 0;
+			break;
+		}
+
+		/* XXX: doorbell was lost and need to acquire it again */
+		if (db_ret.db_status == GUC_DOORBELL_DISABLED)
+			break;
+
+		DRM_ERROR("Cookie mismatch. Expected %d, returned %d\n",
+			  db_cmp.cookie, db_ret.cookie);
+
+		/* update the cookie to newly read cookie from GuC */
+		db_cmp.cookie = db_ret.cookie;
+		db_exc.cookie = db_ret.cookie + 1;
+		if (db_exc.cookie == 0)
+			db_exc.cookie = 1;
+	}
+
+	kunmap_atomic(base);
+	return ret;
+}
+
+static void guc_disable_doorbell(struct intel_guc *guc,
+				 struct i915_guc_client *client)
+{
+	struct drm_i915_private *dev_priv = guc_to_i915(guc);
+	struct guc_doorbell_info *doorbell;
+	void *base;
+	int drbreg = GEN8_DRBREGL(client->doorbell_id);
+	int value;
+
+	base = kmap_atomic(i915_gem_object_get_page(client->client_obj, 0));
+	doorbell = base + client->doorbell_offset;
+
+	doorbell->db_status = 0;
+
+	kunmap_atomic(base);
+
+	I915_WRITE(drbreg, I915_READ(drbreg) & ~GEN8_DRB_VALID);
+
+	value = I915_READ(drbreg);
+	WARN_ON((value & GEN8_DRB_VALID) != 0);
+
+	I915_WRITE(GEN8_DRBREGU(client->doorbell_id), 0);
+	I915_WRITE(drbreg, 0);
+
+	/* XXX: wait for any interrupts */
+	/* XXX: wait for workqueue to drain */
+}
+
+/*
+ * Select, assign and relase doorbell cachelines
+ *
+ * These functions track which doorbell cachelines are in use.
+ * The data they manipulate is protected by the host2guc lock.
+ */
+
+static off_t select_doorbell_cacheline(struct intel_guc *guc)
+{
+	const int cacheline_size = boot_cpu_data.x86_clflush_size;
+	const int cacheline_per_page = PAGE_SIZE / cacheline_size;
+	off_t offset;
+
+	spin_lock(&guc->host2guc_lock);
+
+	/* Doorbell uses single cache line */
+	offset = cacheline_size * guc->db_cacheline;
+
+	/* Moving to next cache line to reduce contention */
+	guc->db_cacheline = (guc->db_cacheline + 1) % cacheline_per_page;
+
+	spin_unlock(&guc->host2guc_lock);
+
+	return offset;
+}
+
+static uint16_t assign_doorbell(struct intel_guc *guc, u32 priority)
+{
+	const uint16_t size = I915_MAX_DOORBELLS;
+	uint16_t id;
+
+	spin_lock(&guc->host2guc_lock);
+
+	/* The bitmap is split into two halves - high and normal priority. */
+	if (priority <= GUC_CTX_PRIORITY_HIGH) {
+		id = find_next_zero_bit(guc->doorbell_bitmap, size, size / 2);
+		if (id == size)
+			id = INVALID_DOORBELL_ID;
+	} else {
+		id = find_next_zero_bit(guc->doorbell_bitmap, size / 2, 0);
+		if (id == size / 2)
+			id = INVALID_DOORBELL_ID;
+	}
+
+	if (id != INVALID_DOORBELL_ID)
+		bitmap_set(guc->doorbell_bitmap, id, 1);
+
+	spin_unlock(&guc->host2guc_lock);
+
+	return id;
+}
+
+static void release_doorbell(struct intel_guc *guc, uint16_t id)
+{
+	spin_lock(&guc->host2guc_lock);
+	bitmap_clear(guc->doorbell_bitmap, id, 1);
+	spin_unlock(&guc->host2guc_lock);
+}
+
+/*
+ * Initialise the process descriptor shared with the GuC firmware.
+ */
+static void guc_init_proc_desc(struct intel_guc *guc,
+			       struct i915_guc_client *client)
+{
+	struct guc_process_desc *desc;
+	void *base;
+
+	base = kmap_atomic(i915_gem_object_get_page(client->client_obj, 0));
+	desc = base + client->proc_desc_offset;
+
+	memset(desc, 0, sizeof(*desc));
+
+	/*
+	 * XXX: pDoorbell and WQVBaseAddress are pointers in process address
+	 * space for ring3 clients (set them as in mmap_ioctl) or kernel
+	 * space for kernel clients (map on demand instead? May make debug
+	 * easier to have it mapped).
+	 */
+	desc->wq_base_addr = 0;
+	desc->db_base_addr = 0;
+
+	desc->context_id = client->ctx_index;
+	desc->wq_size_bytes = client->wq_size;
+	desc->wq_status = WQ_STATUS_ACTIVE;
+	desc->priority = client->priority;
+
+	kunmap_atomic(base);
+}
+
+/*
+ * Initialise/clear the context descriptor shared with the GuC firmware.
+ *
+ * This descriptor tells the GuC where (in GGTT space) to find the important
+ * data structures relating to this client (doorbell, process descriptor,
+ * write queue, etc).
+ */
+
+static void guc_init_ctx_desc(struct intel_guc *guc,
+			      struct i915_guc_client *client)
+{
+	struct guc_context_desc desc;
+	struct sg_table *sg;
+
+	memset(&desc, 0, sizeof(desc));
+
+	desc.attribute = GUC_CTX_DESC_ATTR_ACTIVE | GUC_CTX_DESC_ATTR_KERNEL;
+	desc.context_id = client->ctx_index;
+	desc.priority = client->priority;
+	desc.engines_used = (1 << RCS) | (1 << VCS) | (1 << BCS) |
+			    (1 << VECS) | (1 << VCS2); /* all engines */
+	desc.db_id = client->doorbell_id;
+
+	/*
+	 * The CPU address is only needed at certain points, so kmap_atomic on
+	 * demand instead of storing it in the ctx descriptor.
+	 * XXX: May make debug easier to have it mapped
+	 */
+	desc.db_trigger_cpu = 0;
+	desc.db_trigger_uk = client->doorbell_offset +
+		i915_gem_obj_ggtt_offset(client->client_obj);
+	desc.db_trigger_phy = client->doorbell_offset +
+		sg_dma_address(client->client_obj->pages->sgl);
+
+	desc.process_desc = client->proc_desc_offset +
+		i915_gem_obj_ggtt_offset(client->client_obj);
+
+	desc.wq_addr = client->wq_offset +
+		i915_gem_obj_ggtt_offset(client->client_obj);
+
+	desc.wq_size = client->wq_size;
+
+	/*
+	 * XXX: Take LRCs from an existing intel_context if this is not an
+	 * IsKMDCreatedContext client
+	 */
+	desc.desc_private = (uintptr_t)client;
+
+	/* Pool context is pinned already */
+	sg = guc->ctx_pool_obj->pages;
+	sg_pcopy_from_buffer(sg->sgl, sg->nents, &desc, sizeof(desc),
+			     sizeof(desc) * client->ctx_index);
+}
+
+static void guc_fini_ctx_desc(struct intel_guc *guc,
+			      struct i915_guc_client *client)
+{
+	struct guc_context_desc desc;
+	struct sg_table *sg;
+
+	memset(&desc, 0, sizeof(desc));
+
+	sg = guc->ctx_pool_obj->pages;
+	sg_pcopy_from_buffer(sg->sgl, sg->nents, &desc, sizeof(desc),
+			     sizeof(desc) * client->ctx_index);
+}
+
+/* Get valid workqueue item and return it back to offset */
+static int guc_get_workqueue_space(struct i915_guc_client *gc, u32 *offset)
+{
+	struct guc_process_desc *desc;
+	void *base;
+	u32 size = sizeof(struct guc_wq_item);
+	int ret = 0, timeout_counter = 200;
+	unsigned long flags;
+
+	base = kmap_atomic(i915_gem_object_get_page(gc->client_obj, 0));
+	desc = base + gc->proc_desc_offset;
+
+	while (timeout_counter-- > 0) {
+		spin_lock_irqsave(&gc->wq_lock, flags);
+
+		ret = wait_for_atomic(CIRC_SPACE(gc->wq_tail, desc->head,
+				gc->wq_size) >= size, 1);
+
+		if (!ret) {
+			*offset = gc->wq_tail;
+
+			/* advance the tail for next workqueue item */
+			gc->wq_tail += size;
+			gc->wq_tail &= gc->wq_size - 1;
+
+			/* this will break the loop */
+			timeout_counter = 0;
+		}
+
+		spin_unlock_irqrestore(&gc->wq_lock, flags);
+	};
+
+	kunmap_atomic(base);
+
+	return ret;
+}
+
+static int guc_add_workqueue_item(struct i915_guc_client *gc,
+				  struct intel_context *ctx,
+				  struct intel_engine_cs *ring)
+{
+	struct drm_i915_gem_object *ctx_obj = ctx->engine[ring->id].state;
+	struct intel_ringbuffer *ringbuf = ctx->engine[ring->id].ringbuf;
+	struct guc_wq_item *wqi;
+	void *base;
+	u32 tail, wq_len, wq_off = 0;
+	int ret;
+
+	ret = guc_get_workqueue_space(gc, &wq_off);
+	if (ret)
+		return ret;
+
+	/* For now workqueue item is 4 DWs; workqueue buffer is 2 pages. So we
+	 * should not have the case where structure wqi is across page, neither
+	 * wrapped to the beginning. This simplifies the implementation below.
+	 *
+	 * XXX: if not the case, we need save data to a temp wqi and copy it to
+	 * workqueue buffer dw by dw.
+	 */
+	WARN_ON(sizeof(struct guc_wq_item) != 16);
+	WARN_ON(wq_off & 3);
+
+	/* wq starts from the page after doorbell / process_desc */
+	base = kmap_atomic(i915_gem_object_get_page(gc->client_obj,
+			(wq_off + GUC_DB_SIZE) >> PAGE_SHIFT));
+	wq_off &= PAGE_SIZE - 1;
+	wqi = (struct guc_wq_item *)((char *)base + wq_off);
+
+	/* len does not include the header */
+	wq_len = sizeof(struct guc_wq_item) / sizeof(u32) - 1;
+	wqi->header = WQ_TYPE_INORDER |
+			(wq_len << WQ_LEN_SHIFT) |
+			(ring->id << WQ_TARGET_SHIFT) |
+			WQ_NO_WCFLUSH_WAIT;
+
+	wqi->context_desc = (u32)execlists_ctx_descriptor(ring, ctx_obj);
+
+	/* The GuC firmware wants the tail index in qw */
+	tail = ringbuf->tail >> 3;
+	wqi->ring_tail = tail << WQ_RING_TAIL_SHIFT;
+	wqi->fence_id = 0; /*XXX: what fence to be here */
+
+	kunmap_atomic(base);
+
+	return 0;
+}
+
+static void update_context_image(struct intel_context *ctx,
+				 struct intel_engine_cs *ring)
+{
+	struct intel_ringbuffer *ringbuf = ctx->engine[ring->id].ringbuf;
+	unsigned long ringaddr = i915_gem_obj_ggtt_offset(ringbuf->obj);
+	struct drm_i915_gem_object *ctx_obj = ctx->engine[ring->id].state;
+	struct page *page = i915_gem_object_get_page(ctx_obj, LRC_STATE_PN);
+	uint32_t *reg_state;
+
+	reg_state = kmap_atomic(page);
+	reg_state[CTX_RING_BUFFER_START+1] = ringaddr;
+	kunmap_atomic(reg_state);
+}
+
+/**
+ * i915_guc_submit() - Submit commands through GuC
+ * @client:	the guc client where commands will go through
+ * @ctx:	LRC where commands come from
+ * @ring:	HW engine that will excute the commands
+ *
+ * Return:	0 if succeed
+ */
+int i915_guc_submit(struct i915_guc_client *client,
+		    struct intel_context *ctx,
+		    struct intel_engine_cs *ring)
+{
+	int q_ret, b_ret;
+	unsigned long flags;
+
+	/* Need this because of the deferred pin ctx and ring */
+	/* Shall we move this right after ring is pinned? */
+	update_context_image(ctx, ring);
+
+	q_ret = guc_add_workqueue_item(client, ctx, ring);
+	if (q_ret == 0)
+		b_ret = guc_ring_doorbell(client);
+
+	spin_lock_irqsave(&client->wq_lock, flags);
+	client->submissions += 1;
+	if (q_ret) {
+		client->q_fail += 1;
+		client->retcode = q_ret;
+	} else if (b_ret) {
+		client->b_fail += 1;
+		client->retcode = q_ret = b_ret;
+	} else {
+		client->retcode = 0;
+	}
+	spin_unlock_irqrestore(&client->wq_lock, flags);
+
+	return q_ret;
+}
+
+/*
+ * Everything below here is concerned with setup & teardown, and is
+ * therefore not part of the somewhat time-critical batch-submission
+ * path of i915_guc_submit() above.
+ */
+
+/**
  * gem_allocate_guc_obj() - Allocate gem object for GuC usage
  * @dev:	drm device
  * @size:	size of object
@@ -75,6 +605,118 @@ static void gem_release_guc_obj(struct drm_i915_gem_object *obj)
 	drm_gem_object_unreference(&obj->base);
 }
 
+static void guc_client_free(struct drm_device *dev,
+			    struct i915_guc_client *client)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_guc *guc = &dev_priv->guc;
+
+	if (!client)
+		return;
+
+	if (client->doorbell_id != INVALID_DOORBELL_ID) {
+		/*
+		 * First disable the doorbell, then tell the GuC we've
+		 * finished with it, finally deallocate it in our bitmap
+		 */
+		guc_disable_doorbell(guc, client);
+		host2guc_release_doorbell(guc, client);
+		release_doorbell(guc, client->doorbell_id);
+	}
+
+	/*
+	 * XXX: wait for any outstanding submissions before freeing memory.
+	 * Be sure to drop any locks
+	 */
+
+	gem_release_guc_obj(client->client_obj);
+
+	if (client->ctx_index != INVALID_CTX_ID) {
+		guc_fini_ctx_desc(guc, client);
+		ida_simple_remove(&guc->ctx_ids, client->ctx_index);
+	}
+
+	kfree(client);
+}
+
+/**
+ * guc_client_alloc() - Allocate an i915_guc_client
+ * @dev:	drm device
+ * @priority:	four levels priority _CRITICAL, _HIGH, _NORMAL and _LOW
+ * 		The kernel client to replace ExecList submission is created with
+ * 		NORMAL priority. Priority of a client for scheduler can be HIGH,
+ * 		while a preemption context can use CRITICAL.
+ *
+ * Return:	An i915_guc_client object if success.
+ */
+static struct i915_guc_client *guc_client_alloc(struct drm_device *dev,
+						u32 priority)
+{
+	struct i915_guc_client *client;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_guc *guc = &dev_priv->guc;
+	struct drm_i915_gem_object *obj;
+
+	client = kzalloc(sizeof(*client), GFP_KERNEL);
+	if (!client)
+		return NULL;
+
+	client->doorbell_id = INVALID_DOORBELL_ID;
+	client->priority = priority;
+
+	client->ctx_index = (uint32_t)ida_simple_get(&guc->ctx_ids, 0,
+			MAX_GUC_GPU_CONTEXTS, GFP_KERNEL);
+	if (client->ctx_index >= MAX_GUC_GPU_CONTEXTS) {
+		client->ctx_index = INVALID_CTX_ID;
+		goto err;
+	}
+
+	/* The first page is doorbell/proc_desc. Two followed pages are wq. */
+	obj = gem_allocate_guc_obj(dev, GUC_DB_SIZE + GUC_WQ_SIZE);
+	if (!obj)
+		goto err;
+
+	client->client_obj = obj;
+	client->wq_offset = GUC_DB_SIZE;
+	client->wq_size = GUC_WQ_SIZE;
+	spin_lock_init(&client->wq_lock);
+
+	client->doorbell_offset = select_doorbell_cacheline(guc);
+
+	/*
+	 * Since the doorbell only requires a single cacheline, we can save
+	 * space by putting the application process descriptor in the same
+	 * page. Use the half of the page that doesn't include the doorbell.
+	 */
+	if (client->doorbell_offset >= (GUC_DB_SIZE / 2))
+		client->proc_desc_offset = 0;
+	else
+		client->proc_desc_offset = (GUC_DB_SIZE / 2);
+
+	client->doorbell_id = assign_doorbell(guc, client->priority);
+	if (client->doorbell_id == INVALID_DOORBELL_ID)
+		/* XXX: evict a doorbell instead */
+		goto err;
+
+	guc_init_proc_desc(guc, client);
+	guc_init_ctx_desc(guc, client);
+	guc_init_doorbell(guc, client);
+
+	/* Invalidate GuC TLB to let GuC take the latest updates to GTT. */
+	I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE);
+
+	/* XXX: Any cache flushes needed? General domain mgmt calls? */
+
+	if (host2guc_allocate_doorbell(guc, client))
+		goto err;
+
+	return client;
+
+err:
+	guc_client_free(dev, client);
+	return NULL;
+}
+
 static void guc_create_log(struct intel_guc *guc)
 {
 	struct drm_i915_private *dev_priv = guc_to_i915(guc);
@@ -150,6 +792,32 @@ int i915_guc_submission_init(struct drm_device *dev)
 	return 0;
 }
 
+int i915_guc_submission_enable(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_guc *guc = &dev_priv->guc;
+	struct i915_guc_client *client;
+
+	/* client for execbuf submission */
+	client = guc_client_alloc(dev, GUC_CTX_PRIORITY_NORMAL);
+	if (!client) {
+		DRM_ERROR("Failed to create execbuf guc_client\n");
+		return -ENOMEM;
+	}
+
+	guc->execbuf_client = client;
+	return 0;
+}
+
+void i915_guc_submission_disable(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_guc *guc = &dev_priv->guc;
+
+	guc_client_free(dev, guc->execbuf_client);
+	guc->execbuf_client = NULL;
+}
+
 void i915_guc_submission_fini(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
diff --git a/drivers/gpu/drm/i915/intel_guc.h b/drivers/gpu/drm/i915/intel_guc.h
index 06b68c2..147d288 100644
--- a/drivers/gpu/drm/i915/intel_guc.h
+++ b/drivers/gpu/drm/i915/intel_guc.h
@@ -173,6 +173,11 @@ extern void intel_guc_ucode_fini(struct drm_device *dev);
 
 /* i915_guc_submission.c */
 int i915_guc_submission_init(struct drm_device *dev);
+int i915_guc_submission_enable(struct drm_device *dev);
+int i915_guc_submit(struct i915_guc_client *client,
+		    struct intel_context *ctx,
+		    struct intel_engine_cs *ring);
+void i915_guc_submission_disable(struct drm_device *dev);
 void i915_guc_submission_fini(struct drm_device *dev);
 
 #endif
diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c
index 0f74876..6e4667d 100644
--- a/drivers/gpu/drm/i915/intel_guc_loader.c
+++ b/drivers/gpu/drm/i915/intel_guc_loader.c
@@ -390,6 +390,8 @@ int intel_guc_ucode_load(struct drm_device *dev, bool wait)
 	if (guc_fw->uc_fw_fetch_status == INTEL_UC_FIRMWARE_PENDING && !wait)
 		return -EAGAIN;
 
+	i915_guc_submission_disable(dev);
+
 	if (guc_fw->uc_fw_fetch_status == INTEL_UC_FIRMWARE_NONE)
 		return 0;
 
@@ -412,12 +414,20 @@ int intel_guc_ucode_load(struct drm_device *dev, bool wait)
 
 	guc_fw->uc_fw_load_status = INTEL_UC_FIRMWARE_SUCCESS;
 
+	if (i915.enable_guc_submission) {
+		err = i915_guc_submission_enable(dev);
+		if (err)
+			goto fail;
+	}
+
 	return 0;
 
 fail:
 	if (guc_fw->uc_fw_load_status == INTEL_UC_FIRMWARE_PENDING)
 		guc_fw->uc_fw_load_status = INTEL_UC_FIRMWARE_FAIL;
 
+	i915_guc_submission_disable(dev);
+
 	DRM_ERROR("Failed to initialize GuC, error %d\n", err);
 
 	return err;
-- 
1.7.9.5



More information about the Intel-gfx mailing list