[Intel-gfx] [PATCH 4/5] drm/i915/vlv: factor out vlv_calc_port_clock

Jindal, Sonika sonika.jindal at intel.com
Wed Jun 24 03:16:59 PDT 2015



On 6/18/2015 7:55 PM, Imre Deak wrote:
> This functionality will be needed by the next patch adding HW readout
> support for DDI ports on BXT, so factor it out.
>
> No functional change.
>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
>   drivers/gpu/drm/i915/intel_display.c | 18 ++++++++++--------
>   drivers/gpu/drm/i915/intel_drv.h     |  2 ++
>   2 files changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 0e5c613..6cf2a15 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7993,6 +7993,14 @@ static void i9xx_get_pfit_config(struct intel_crtc *crtc,
>   			I915_READ(LVDS) & LVDS_BORDER_ENABLE;
>   }
>
> +int vlv_calc_port_clock(int refclk, intel_clock_t *pll_clock)
> +{
> +	chv_clock(refclk, pll_clock);
Is vlv_clock function same as chv_clock ?
I see one clock->n << 22 in chv_clock which is not there in vlv_clock.

> +
> +	/* clock.dot is the fast clock */
> +	return pll_clock->dot / 5;
> +}
> +
>   static void vlv_crtc_clock_get(struct intel_crtc *crtc,
>   			       struct intel_crtc_state *pipe_config)
>   {
> @@ -8017,10 +8025,7 @@ static void vlv_crtc_clock_get(struct intel_crtc *crtc,
>   	clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
>   	clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
>
> -	vlv_clock(refclk, &clock);
> -
> -	/* clock.dot is the fast clock */
> -	pipe_config->port_clock = clock.dot / 5;
> +	pipe_config->port_clock = vlv_calc_port_clock(refclk, &clock);
>   }
>
>   static void
> @@ -8116,10 +8121,7 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc,
>   	clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
>   	clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
>
> -	chv_clock(refclk, &clock);
> -
> -	/* clock.dot is the fast clock */
> -	pipe_config->port_clock = clock.dot / 5;
> +	pipe_config->port_clock = vlv_calc_port_clock(refclk, &clock);
>   }
>
>   static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index bcafefc..95e14bb 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1139,6 +1139,8 @@ ironlake_check_encoder_dotclock(const struct intel_crtc_state *pipe_config,
>   				int dotclock);
>   bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, int target_clock,
>   			intel_clock_t *best_clock);
> +int vlv_calc_port_clock(int refclk, intel_clock_t *pll_clock);
> +
>   bool intel_crtc_active(struct drm_crtc *crtc);
>   void hsw_enable_ips(struct intel_crtc *crtc);
>   void hsw_disable_ips(struct intel_crtc *crtc);
>


More information about the Intel-gfx mailing list