[Intel-gfx] [PATCH 3/4] drm/i915/skl: Add support for edp 1.4 intermediate frequencies
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Mar 4 03:24:38 PST 2015
On Sat, Feb 21, 2015 at 11:12:12AM +0530, Sonika Jindal wrote:
> eDp 1.4 supports custom frequencies.
> Skylake supports following intermediate frequencies : 3.24 GHz, 2.16 GHz and
> 4.32 GHz along with usual LBR, HBR and HBR2 frequencies.
> Read sink supported frequencies and get common frequencies from sink and
> source and use these for link training.
>
> v2: Rebased, removed calculation of min_clock since for edp it is taken as
> max_clock (as per comment).
> v3: Keeping single array for link rates (Satheesh)
> v4: Setting LINK_BW_SET to 0 when setting LINK_RATE_SET (Satheesh)
> v5: Some minor nits (Ville)
> v6: Keeping separate arrays for source and sink rates (Ville)
>
> Signed-off-by: Sonika Jindal <sonika.jindal at intel.com>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 9 +++
> drivers/gpu/drm/i915/intel_dp.c | 113 +++++++++++++++++++++++++++++++++++---
> drivers/gpu/drm/i915/intel_drv.h | 1 +
> 3 files changed, 115 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 4d8c38d..db00db8 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -803,9 +803,18 @@ static void skl_ddi_clock_get(struct intel_encoder *encoder,
> case DPLL_CRTL1_LINK_RATE_810:
> link_clock = 81000;
> break;
> + case DPLL_CRTL1_LINK_RATE_1080:
> + link_clock = 108000;
> + break;
> case DPLL_CRTL1_LINK_RATE_1350:
> link_clock = 135000;
> break;
> + case DPLL_CRTL1_LINK_RATE_1620:
> + link_clock = 162000;
> + break;
> + case DPLL_CRTL1_LINK_RATE_2160:
> + link_clock = 216000;
> + break;
> case DPLL_CRTL1_LINK_RATE_2700:
> link_clock = 270000;
> break;
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 72deac6..cf7a0f5 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -83,6 +83,11 @@ static const struct dp_link_dpll chv_dpll[] = {
> { DP_LINK_BW_5_4, /* m2_int = 27, m2_fraction = 0 */
> { .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
> };
> +/* Skylake supports following rates */
> +static const uint32_t gen9_rates[] = { 162000, 216000, 270000, 324000,
> + 432000, 540000 };
> +
> +static const uint32_t default_rates[] = { 162000, 270000, 540000 };
>
> /**
> * is_edp - is the given port attached to an eDP panel (either CPU or PCH)
> @@ -1143,6 +1148,25 @@ intel_read_sink_rates(struct intel_dp *intel_dp, uint32_t *sink_rates)
> return i;
> }
>
> +static int
> +intel_read_source_rates(struct intel_dp *intel_dp, uint32_t *source_rates)
> +{
> + struct drm_device *dev = intel_dp_to_dev(intel_dp);
> + int i;
> + int max_default_rate;
> +
> + if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) {
> + for (i = 0; i < ARRAY_SIZE(gen9_rates); ++i)
> + source_rates[i] = gen9_rates[i];
> + } else {
> + /* Index of the max_link_bw supported + 1 */
> + max_default_rate = (intel_dp_max_link_bw(intel_dp) >> 3) + 1;
> + for (i = 0; i < max_default_rate; ++i)
> + source_rates[i] = default_rates[i];
> + }
> + return i;
> +}
> +
> static void
> intel_dp_set_clock(struct intel_encoder *encoder,
> struct intel_crtc_state *pipe_config, int link_bw)
> @@ -1176,6 +1200,45 @@ intel_dp_set_clock(struct intel_encoder *encoder,
> }
> }
>
> +static int intel_supported_rates(const uint32_t *source_rates, int source_len,
> +const uint32_t *sink_rates, int sink_len, uint32_t *supported_rates)
> +{
> + int i = 0, j = 0, k = 0;
> +
> + /* For panels with edp version less than 1.4 */
> + if (sink_len == 0) {
> + for (i = 0; i < source_len; ++i)
> + supported_rates[i] = source_rates[i];
> + return source_len;
> + }
> +
> + /* For edp1.4 panels, find the common rates between source and sink */
> + while (i < source_len && j < sink_len) {
> + if (source_rates[i] == sink_rates[j]) {
> + supported_rates[k] = source_rates[i];
> + ++k;
> + ++i;
> + ++j;
> + } else if (source_rates[i] < sink_rates[j]) {
> + ++i;
> + } else {
> + ++j;
> + }
> + }
> + return k;
> +}
> +
> +static int rate_to_index(uint32_t find, const uint32_t *rates)
> +{
> + int i = 0;
> +
> + for (i = 0; i < DP_MAX_SUPPORTED_RATES; ++i)
> + if (find == rates[i])
> + break;
> +
> + return i;
> +}
> +
> bool
> intel_dp_compute_config(struct intel_encoder *encoder,
> struct intel_crtc_state *pipe_config)
> @@ -1192,10 +1255,25 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> int max_lane_count = intel_dp_max_lane_count(intel_dp);
> /* Conveniently, the link BW constants become indices with a shift...*/
> int min_clock = 0;
> - int max_clock = intel_dp_max_link_bw(intel_dp) >> 3;
> + int max_clock;
> int bpp, mode_rate;
> - static int bws[] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4 };
> int link_avail, link_clock;
> + uint32_t sink_rates[8];
> + uint32_t supported_rates[8] = {0};
> + uint32_t source_rates[8];
> + int source_len, sink_len, supported_len;
> +
> + sink_len = intel_read_sink_rates(intel_dp, sink_rates);
> +
> + source_len = intel_read_source_rates(intel_dp, source_rates);
> +
> + supported_len = intel_supported_rates(source_rates, source_len,
> + sink_rates, sink_len, supported_rates);
> +
> + /* No common link rates between source and sink */
> + WARN_ON(supported_len <= 0);
> +
> + max_clock = supported_len - 1;
>
> if (HAS_PCH_SPLIT(dev) && !HAS_DDI(dev) && port != PORT_A)
> pipe_config->has_pch_encoder = true;
> @@ -1219,8 +1297,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> return false;
>
> DRM_DEBUG_KMS("DP link computation with max lane count %i "
> - "max bw %02x pixel clock %iKHz\n",
> - max_lane_count, bws[max_clock],
> + "max bw %d pixel clock %iKHz\n",
> + max_lane_count, supported_rates[max_clock],
> adjusted_mode->crtc_clock);
>
> /* Walk through all bpp values. Luckily they're all nicely spaced with 2
> @@ -1249,8 +1327,11 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> bpp);
>
> for (clock = min_clock; clock <= max_clock; clock++) {
> - for (lane_count = min_lane_count; lane_count <= max_lane_count; lane_count <<= 1) {
> - link_clock = drm_dp_bw_code_to_link_rate(bws[clock]);
> + for (lane_count = min_lane_count;
> + lane_count <= max_lane_count;
> + lane_count <<= 1) {
> +
> + link_clock = supported_rates[clock];
> link_avail = intel_dp_max_data_rate(link_clock,
> lane_count);
>
> @@ -1279,10 +1360,19 @@ found:
> if (intel_dp->color_range)
> pipe_config->limited_color_range = true;
>
> - intel_dp->link_bw = bws[clock];
> intel_dp->lane_count = lane_count;
> +
> + intel_dp->link_bw =
> + drm_dp_link_rate_to_bw_code(supported_rates[clock]);
> +
> + if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) {
> + intel_dp->rate_select =
> + rate_to_index(supported_rates[clock], sink_rates);
> + intel_dp->link_bw = 0;
> + }
> +
> pipe_config->pipe_bpp = bpp;
> - pipe_config->port_clock = drm_dp_bw_code_to_link_rate(intel_dp->link_bw);
> + pipe_config->port_clock = supported_rates[clock];
>
> DRM_DEBUG_KMS("DP link bw %02x lane count %d clock %d bpp %d\n",
> intel_dp->link_bw, intel_dp->lane_count,
> @@ -3392,6 +3482,13 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
> if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
> link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
> drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
> + if (INTEL_INFO(dev)->gen >= 9 && intel_dp->supported_rates[0]) {
> + link_config[0] = 0;
> + drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET,
> + link_config, 1);
LINK_BW_SET was already written just above. So this second write isn't
needed.
With that fixed this looks pretty good to me, so
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> + drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET,
> + &intel_dp->rate_select, 1);
> + }
>
> link_config[0] = 0;
> link_config[1] = DP_SET_ANSI_8B10B;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 24e5411..b54b5f0 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -598,6 +598,7 @@ struct intel_dp {
> uint32_t color_range;
> bool color_range_auto;
> uint8_t link_bw;
> + uint8_t rate_select;
> uint8_t lane_count;
> uint8_t dpcd[DP_RECEIVER_CAP_SIZE];
> uint8_t psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
> --
> 1.7.10.4
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list