[Intel-gfx] [PATCH 7/7] lib: add igt_draw
Paulo Zanoni
przanoni at gmail.com
Mon Mar 30 12:45:49 PDT 2015
2015-03-26 7:19 GMT-03:00 Daniel Vetter <daniel at ffwll.ch>:
> On Wed, Mar 25, 2015 at 06:50:39PM -0300, Paulo Zanoni wrote:
>> From: Paulo Zanoni <paulo.r.zanoni at intel.com>
>>
>> For all those IGT tests that need an easy way to draw rectangles on
>> buffers using different methods. Current planned users: FBC and PSR
>> CRC tests.
>>
>> There is also a lib/tests/igt_draw program to check if the library is
>> sane.
>
> We need to move that to tests/igt_draw. The testcase in lib/tests/* get
> run with make check, which must be possible as non-root on a non-intel
> (build) machine. If you need an gpu to run your test it must be in tests/*
> as a normal igt kernel test.
>
> Wrt the library itself I'm unsure about the explicit tiling/swizzling.
> Your current code only works on gen5-8 and maintaining a full-blown
> swizzle/tiling library is real work, and means some of the tests can't be
> converted to this.
This would just be a problem for the tests that use it, and no test is
using it yet. This is just for the cases where you want to use the CPU
to write into tiled buffers.
If we start using this in a test, then we need to properly test all
the affected platforms. I have some local FBC tests that use it -
which I was going to submit after getting feedback on this lib -, and
I don't think we'll end needing to run these tests on the older
platforms.
> We do have all the tiling modes encoded in the tiling
> tests though, so if you have a lot of time it might be useful to extract
> tiling helpers into the igt library which work on all generations.
Can you please be more precise here? Where exactly should I look?
>
> I think we should at least have a fallback mode which allows us to fill an
> entire buffer completely (i.e. not just the hxw area) and treat it as
> untiled.
That is not the goal of the library. Still, if we ever need this
function, it would be easy to add.
>
> More comments below.
More below too :)
> -Daniel
>
>>
>> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
>> ---
>> lib/Makefile.sources | 2 +
>> lib/igt_draw.c | 467 +++++++++++++++++++++++++++++++++++++++++++++
>> lib/igt_draw.h | 54 ++++++
>> lib/tests/.gitignore | 1 +
>> lib/tests/Makefile.sources | 1 +
>> lib/tests/igt_draw.c | 247 ++++++++++++++++++++++++
>> 6 files changed, 772 insertions(+)
>> create mode 100644 lib/igt_draw.c
>> create mode 100644 lib/igt_draw.h
>> create mode 100644 lib/tests/igt_draw.c
>>
>> diff --git a/lib/Makefile.sources b/lib/Makefile.sources
>> index 3d93629..85dc321 100644
>> --- a/lib/Makefile.sources
>> +++ b/lib/Makefile.sources
>> @@ -52,6 +52,8 @@ libintel_tools_la_SOURCES = \
>> igt_fb.h \
>> igt_core.c \
>> igt_core.h \
>> + igt_draw.c \
>> + igt_draw.h \
>> $(NULL)
>>
>> .PHONY: version.h.tmp
>> diff --git a/lib/igt_draw.c b/lib/igt_draw.c
>> new file mode 100644
>> index 0000000..4eb7507
>> --- /dev/null
>> +++ b/lib/igt_draw.c
>> @@ -0,0 +1,467 @@
>> +/*
>> + * Copyright © 2015 Intel Corporation
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a
>> + * copy of this software and associated documentation files (the "Software"),
>> + * to deal in the Software without restriction, including without limitation
>> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
>> + * and/or sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice (including the next
>> + * paragraph) shall be included in all copies or substantial portions of the
>> + * Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
>> + * IN THE SOFTWARE.
>> + *
>> + */
>> +
>> +#include <sys/mman.h>
>> +
>> +#include "igt_draw.h"
>> +
>> +#include "drmtest.h"
>> +#include "intel_chipset.h"
>> +#include "igt_core.h"
>> +#include "igt_fb.h"
>> +#include "ioctl_wrappers.h"
>> +
>> +/**
>> + * SECTION:igt_draw
>> + * @short_description: drawing helpers for tests
>> + * @title: i-g-t draw
>> + * @include: igt_draw.h
>> + *
>> + * This library contains some functions for drawing rectangles on buffers using
>> + * the many different drawing methods we have. It also contains some wrappers
>> + * that make the process easier if you have the abstract objects in hand.
>> + *
>> + * All functions assume the buffers are in the XRGB 8:8:8 format.
>> + *
>> + */
>> +
>> +/* Some internal data structures to avoid having to pass tons of parameters
>> + * around everything. */
>> +struct cmd_data {
>> + drm_intel_bufmgr *bufmgr;
>> + drm_intel_context *context;
>> +};
>> +
>> +struct buf_data {
>> + uint32_t handle;
>> + uint32_t size;
>> + uint32_t stride;
>> +};
>> +
>> +struct rect {
>> + int x;
>> + int y;
>> + int w;
>> + int h;
>> +};
>> +
>> +const char *igt_draw_get_method_name(enum igt_draw_method method)
>> +{
>> + switch (method) {
>> + case IGT_DRAW_MMAP_CPU:
>> + return "mmap-cpu";
>> + case IGT_DRAW_MMAP_GTT:
>> + return "mmap-gtt";
>> + case IGT_DRAW_PWRITE:
>> + return "pwrite";
>> + case IGT_DRAW_BLT:
>> + return "blt";
>> + case IGT_DRAW_RENDER:
>> + return "render";
>> + default:
>> + igt_assert(false);
>> + }
>> +}
>> +
>> +static int swizzle_addr(int addr, int swizzle)
>> +{
>> + int bit6;
>> +
>> + if (swizzle == I915_BIT_6_SWIZZLE_9_10) {
>> + bit6 = ((addr >> 6) & 1) ^ ((addr >> 9) & 1) ^
>> + ((addr >> 10) & 1);
>> + addr &= ~(1 << 6);
>> + addr |= (bit6 << 6);
>> + }
>> +
>> + return addr;
>> +}
>> +
>> +/* It's all in "pixel coordinates", so make sure you multiply/divide by the bpp
>> + * if you need to. */
>> +static int linear_x_y_to_tiled_pos(int x, int y, uint32_t stride, int swizzle)
>> +{
>> + int x_tile_size, y_tile_size;
>> + int x_tile_n, y_tile_n, x_tile_off, y_tile_off;
>> + int line_size, tile_size;
>> + int tile_n, tile_off;
>> + int tiled_pos, tiles_per_line;
>> + int bpp;
>> +
>> + line_size = stride;
>> + x_tile_size = 512;
>> + y_tile_size = 8;
>> + tile_size = x_tile_size * y_tile_size;
>> + tiles_per_line = line_size / x_tile_size;
>> + bpp = sizeof(uint32_t);
>> +
>> + y_tile_n = y / y_tile_size;
>> + y_tile_off = y % y_tile_size;
>> +
>> + x_tile_n = (x * bpp) / x_tile_size;
>> + x_tile_off = (x * bpp) % x_tile_size;
>> +
>> + tile_n = y_tile_n * tiles_per_line + x_tile_n;
>> + tile_off = y_tile_off * x_tile_size + x_tile_off;
>> + tiled_pos = tile_n * tile_size + tile_off;
>> +
>> + tiled_pos = swizzle_addr(tiled_pos, swizzle);
>> +
>> + return tiled_pos / bpp;
>> +}
>> +
>> +/* It's all in "pixel coordinates", so make sure you multiply/divide by the bpp
>> + * if you need to. */
>> +static void tiled_pos_to_x_y_linear(int tiled_pos, uint32_t stride,
>> + int swizzle, int *x, int *y)
>> +{
>> + int tile_n, tile_off, tiles_per_line, line_size;
>> + int x_tile_off, y_tile_off;
>> + int x_tile_n, y_tile_n;
>> + int x_tile_size, y_tile_size, tile_size;
>> + int bpp;
>> +
>> + tiled_pos = swizzle_addr(tiled_pos, swizzle);
>> +
>> + line_size = stride;
>> + x_tile_size = 512;
>> + y_tile_size = 8;
>> + tile_size = x_tile_size * y_tile_size;
>> + tiles_per_line = line_size / x_tile_size;
>> + bpp = sizeof(uint32_t);
>> +
>> + tile_n = tiled_pos / tile_size;
>> + tile_off = tiled_pos % tile_size;
>> +
>> + y_tile_off = tile_off / x_tile_size;
>> + x_tile_off = tile_off % x_tile_size;
>> +
>> + x_tile_n = tile_n % tiles_per_line;
>> + y_tile_n = tile_n / tiles_per_line;
>> +
>> + *x = (x_tile_n * x_tile_size + x_tile_off) / bpp;
>> + *y = y_tile_n * y_tile_size + y_tile_off;
>> +}
>> +
>> +static void draw_rect_mmap_cpu(int fd, struct buf_data *buf, struct rect *rect,
>> + uint32_t color)
>> +{
>> + uint32_t *ptr;
>> + int x, y, pos;
>> + uint32_t tiling, swizzle;
>> +
>> + gem_set_domain(fd, buf->handle, I915_GEM_DOMAIN_CPU,
>> + I915_GEM_DOMAIN_CPU);
>> + gem_get_tiling(fd, buf->handle, &tiling, &swizzle);
>> +
>> + ptr = gem_mmap__cpu(fd, buf->handle, 0, buf->size, 0);
>> + igt_assert(ptr);
>> +
>> + for (y = rect->y; y < rect->y + rect->h; y++) {
>> + for (x = rect->x; x < rect->x + rect->w; x++) {
>> + if (tiling)
>> + pos = linear_x_y_to_tiled_pos(x, y, buf->stride,
>> + swizzle);
>> + else
>> + pos = (y * buf->stride / sizeof(uint32_t)) + x;
>> + ptr[pos] = color;
>> + }
>> + }
>> +
>> + gem_sw_finish(fd, buf->handle);
>> +
>> + igt_assert(munmap(ptr, buf->size) == 0);
>> +}
>> +
>> +static void draw_rect_mmap_gtt(int fd, struct buf_data *buf, struct rect *rect,
>> + uint32_t color)
>> +{
>> + uint32_t *ptr;
>> + int x, y;
>> +
>> + ptr = gem_mmap__gtt(fd, buf->handle, buf->size,
>> + PROT_READ | PROT_WRITE);
>> + igt_assert(ptr);
>> +
>> + for (y = rect->y; y < rect->y + rect->h; y++) {
>> + int line_begin = y * buf->stride / sizeof(uint32_t);
>> + for (x = rect->x; x < rect->x + rect->w; x++)
>> + ptr[line_begin + x] = color;
>> + }
>> +
>> + igt_assert(munmap(ptr, buf->size) == 0);
>> +}
>> +
>> +static void draw_rect_pwrite_untiled(int fd, struct buf_data *buf,
>> + struct rect *rect, uint32_t color)
>> +{
>> + uint32_t tmp[rect->w];
>> + int i, y, offset, bpp;
>> +
>> + bpp = sizeof(uint32_t);
>> +
>> + for (i = 0; i < rect->w; i++)
>> + tmp[i] = color;
>> +
>> + for (y = rect->y; y < rect->y + rect->h; y++) {
>> + offset = (y * buf->stride) + (rect->x * bpp);
>> + gem_write(fd, buf->handle, offset, tmp, rect->w * bpp);
>> + }
>> +}
>> +
>> +static void draw_rect_pwrite_tiled(int fd, struct buf_data *buf,
>> + struct rect *rect, uint32_t color,
>> + uint32_t swizzle)
>> +{
>> + int i;
>> + int tiled_pos, bpp, x, y;
>> + uint32_t tmp[1024];
>> + int tmp_used = 0, tmp_size = ARRAY_SIZE(tmp);
>> + bool flush_tmp = false;
>> + int tmp_start_pos = 0;
>> +
>> + bpp = sizeof(uint32_t);
>> +
>> + /* Instead of doing one pwrite per pixel, we try to group the maximum
>> + * amount of consecutive pixels we can in a single pwrite: that's why we
>> + * use the "tmp" variables. */
>> + for (i = 0; i < tmp_size; i++)
>> + tmp[i] = color;
>> +
>> + for (tiled_pos = 0; tiled_pos < buf->size; tiled_pos += bpp) {
>> + tiled_pos_to_x_y_linear(tiled_pos, buf->stride, swizzle, &x, &y);
>> +
>> + if (x >= rect->x && x < rect->x + rect->w &&
>> + y >= rect->y && y < rect->y + rect->h) {
>> + if (tmp_used == 0)
>> + tmp_start_pos = tiled_pos;
>> + tmp_used++;
>> + } else {
>> + flush_tmp = true;
>> + }
>> +
>> + if (tmp_used == tmp_size || (flush_tmp && tmp_used > 0)) {
>> + gem_write(fd, buf->handle, tmp_start_pos, tmp,
>> + tmp_used * bpp);
>> + flush_tmp = false;
>> + tmp_used = 0;
>> + }
>> + }
>> +}
>> +
>> +static void draw_rect_pwrite(int fd, struct buf_data *buf,
>> + struct rect *rect, uint32_t color)
>> +{
>> + uint32_t tiling, swizzle;
>> +
>> + gem_get_tiling(fd, buf->handle, &tiling, &swizzle);
>> +
>> + if (tiling)
>> + draw_rect_pwrite_tiled(fd, buf, rect, color, swizzle);
>> + else
>> + draw_rect_pwrite_untiled(fd, buf, rect, color);
>> +}
>> +
>> +static void draw_rect_blt(int fd, struct cmd_data *cmd_data,
>> + struct buf_data *buf, struct rect *rect,
>> + uint32_t color)
>> +{
>> + drm_intel_bo *dst;
>> + struct intel_batchbuffer *batch;
>> + int blt_cmd_len, blt_cmd_tiling;
>> + uint32_t devid = intel_get_drm_devid(fd);
>> + int gen = intel_gen(devid);
>> + uint32_t tiling, swizzle;
>> + int pitch;
>> +
>> + gem_get_tiling(fd, buf->handle, &tiling, &swizzle);
>> +
>> + dst = gem_handle_to_libdrm_bo(cmd_data->bufmgr, fd, "", buf->handle);
>> + igt_assert(dst);
>> +
>> + batch = intel_batchbuffer_alloc(cmd_data->bufmgr, devid);
>> + igt_assert(batch);
>> +
>> + blt_cmd_len = (gen >= 8) ? 0x5 : 0x4;
>> + blt_cmd_tiling = (tiling) ? XY_COLOR_BLT_TILED : 0;
>> + pitch = (tiling) ? buf->stride / 4 : buf->stride;
>> +
>> + BEGIN_BATCH(6, 1);
>
> This breaks on gen8 because there the relocations are 2 dwords. You need
> to use the magic macros for that.
>
Please read the code again. I actually developed and tested everything
on gen8 :)
>> + OUT_BATCH(XY_COLOR_BLT_CMD_NOLEN | XY_COLOR_BLT_WRITE_ALPHA |
>> + XY_COLOR_BLT_WRITE_RGB | blt_cmd_tiling | blt_cmd_len);
>> + OUT_BATCH((3 << 24) | (0xF0 << 16) | pitch);
>> + OUT_BATCH((rect->y << 16) | rect->x);
>> + OUT_BATCH(((rect->y + rect->h) << 16) | (rect->x + rect->w));
>> + if (tiling)
>> + OUT_RELOC_FENCED(dst, 0, I915_GEM_DOMAIN_RENDER, 0);
>> + else
>> + OUT_RELOC(dst, 0, I915_GEM_DOMAIN_RENDER, 0);
>> + OUT_BATCH(color);
>> + ADVANCE_BATCH();
>> +
>> + intel_batchbuffer_flush(batch);
>> + gem_sync(fd, buf->handle);
>> + intel_batchbuffer_free(batch);
>> +}
>> +
>> +static void draw_rect_render(int fd, struct cmd_data *cmd_data,
>> + struct buf_data *buf, struct rect *rect,
>> + uint32_t color)
>> +{
>> + drm_intel_bo *src, *dst;
>> + uint32_t devid = intel_get_drm_devid(fd);
>> + igt_render_copyfunc_t rendercopy = igt_get_render_copyfunc(devid);
>> + struct igt_buf src_buf, dst_buf;
>> + struct intel_batchbuffer *batch;
>> + uint32_t tiling, swizzle;
>> + struct buf_data tmp;
>> +
>> + igt_skip_on(!rendercopy);
>> +
>> + gem_get_tiling(fd, buf->handle, &tiling, &swizzle);
>> +
>> + /* We create a temporary buffer and copy from it using rendercopy. */
>> + tmp.size = rect->w * rect->h * sizeof(uint32_t);
>> + tmp.handle = gem_create(fd, tmp.size);
>> + tmp.stride = rect->w * sizeof(uint32_t);
>> + draw_rect_mmap_cpu(fd, &tmp, &(struct rect){0, 0, rect->w, rect->h},
>> + color);
>> +
>> + src = gem_handle_to_libdrm_bo(cmd_data->bufmgr, fd, "", tmp.handle);
>> + igt_assert(src);
>> + dst = gem_handle_to_libdrm_bo(cmd_data->bufmgr, fd, "", buf->handle);
>> + igt_assert(dst);
>> +
>> + src_buf.bo = src;
>> + src_buf.stride = tmp.stride;
>> + src_buf.tiling = I915_TILING_NONE;
>> + src_buf.size = tmp.size;
>> + dst_buf.bo = dst;
>> + dst_buf.stride = buf->stride;
>> + dst_buf.tiling = tiling;
>> + dst_buf.size = buf->size;
>> +
>> + batch = intel_batchbuffer_alloc(cmd_data->bufmgr, devid);
>> + igt_assert(batch);
>> +
>> + rendercopy(batch, cmd_data->context, &src_buf, 0, 0, rect->w, rect->h,
>> + &dst_buf, rect->x, rect->y);
>> +
>> + gem_sync(fd, buf->handle);
>> + intel_batchbuffer_free(batch);
>> + gem_close(fd, tmp.handle);
>> +}
>> +
>> +/**
>> + * igt_draw_rect:
>> + * @fd: the DRM file descriptor
>> + * @bufmgr: the libdrm bufmgr, only required for IGT_DRAW_BLT and
>> + * IGT_DRAW_RENDER
>> + * @context: the context, can be NULL if you don't want to think about it
>> + * @buf_handle: the handle of the buffer where you're going to draw to
>> + * @buf_size: the size of the buffer
>> + * @buf_stride: the stride of the buffer
>> + * @method: method you're going to use to write to the buffer
>> + * @rect_x: horizontal position on the buffer where your rectangle starts
>> + * @rect_y: vertical position on the buffer where your rectangle starts
>> + * @rect_w: width of the rectangle
>> + * @rect_h: height of the rectangle
>> + * @color: color of the rectangle
>> + *
>> + * This function draws a colored rectangle on the destination buffer, allowing
>> + * you to specify the method used to draw the rectangle. We assume 32 bit pixels
>> + * with 8 bits per color.
>> + */
>> +void igt_draw_rect(int fd, drm_intel_bufmgr *bufmgr, drm_intel_context *context,
>> + uint32_t buf_handle, uint32_t buf_size, uint32_t buf_stride,
>> + enum igt_draw_method method, int rect_x, int rect_y,
>> + int rect_w, int rect_h, uint32_t color)
>> +{
>> + struct cmd_data cmd_data = {
>> + .bufmgr = bufmgr,
>> + .context = context,
>> + };
>> + struct buf_data buf = {
>> + .handle = buf_handle,
>> + .size = buf_size,
>> + .stride = buf_stride,
>> + };
>> + struct rect rect = {
>> + .x = rect_x,
>> + .y = rect_y,
>> + .w = rect_w,
>> + .h = rect_h,
>> + };
>> +
>> + switch (method) {
>> + case IGT_DRAW_MMAP_CPU:
>> + draw_rect_mmap_cpu(fd, &buf, &rect, color);
>> + break;
>> + case IGT_DRAW_MMAP_GTT:
>> + draw_rect_mmap_gtt(fd, &buf, &rect, color);
>> + break;
>> + case IGT_DRAW_PWRITE:
>> + draw_rect_pwrite(fd, &buf, &rect, color);
>> + break;
>> + case IGT_DRAW_BLT:
>> + draw_rect_blt(fd, &cmd_data, &buf, &rect, color);
>> + break;
>> + case IGT_DRAW_RENDER:
>> + draw_rect_render(fd, &cmd_data, &buf, &rect, color);
>> + break;
>> + default:
>> + igt_assert(false);
>> + break;
>> + }
>> +}
>> +
>> +/**
>> + * igt_draw_rect_fb:
>> + *
>> + * This is exactly the same as igt_draw_rect, but you can pass an igt_fb instead
>> + * of manually providing its details. See igt_draw_rect.
>> + */
>> +void igt_draw_rect_fb(int fd, drm_intel_bufmgr *bufmgr,
>> + drm_intel_context *context, struct igt_fb *fb,
>> + enum igt_draw_method method, int rect_x, int rect_y,
>> + int rect_w, int rect_h, uint32_t color)
>> +{
>> + igt_draw_rect(fd, bufmgr, context, fb->gem_handle, fb->size, fb->stride,
>> + method, rect_x, rect_y, rect_w, rect_h, color);
>> +}
>> +
>> +/**
>> + * igt_draw_fill_fb:
>> + * @fd: the DRM file descriptor
>> + * @fb: the FB that is going to be filled
>> + * @color: the color you're going to paint it
>> + *
>> + * This function just paints an igt_fb using the provided color. It assumes 32
>> + * bit pixels with 8 bit colors.
>> + */
>> +void igt_draw_fill_fb(int fd, struct igt_fb *fb, uint32_t color)
>> +{
>> + igt_draw_rect_fb(fd, NULL, NULL, fb, IGT_DRAW_MMAP_GTT,
>> + 0, 0, fb->width, fb->height, color);
>> +}
>> diff --git a/lib/igt_draw.h b/lib/igt_draw.h
>> new file mode 100644
>> index 0000000..399e17c
>> --- /dev/null
>> +++ b/lib/igt_draw.h
>> @@ -0,0 +1,54 @@
>> +/*
>> + * Copyright © 2015 Intel Corporation
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a
>> + * copy of this software and associated documentation files (the "Software"),
>> + * to deal in the Software without restriction, including without limitation
>> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
>> + * and/or sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice (including the next
>> + * paragraph) shall be included in all copies or substantial portions of the
>> + * Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
>> + * IN THE SOFTWARE.
>> + *
>> + */
>> +
>> +#ifndef __IGT_DRAW_H__
>> +#define __IGT_DRAW_H__
>> +
>> +#include <intel_bufmgr.h>
>> +#include "igt_fb.h"
>> +
>
> gtkdoc for this enum would be nice too I think.
Ok.
>
>> +enum igt_draw_method {
>> + IGT_DRAW_MMAP_CPU,
>> + IGT_DRAW_MMAP_GTT,
>> + IGT_DRAW_PWRITE,
>> + IGT_DRAW_BLT,
>> + IGT_DRAW_RENDER,
>> + IGT_DRAW_METHOD_COUNT,
>> +};
>> +
>> +const char *igt_draw_get_method_name(enum igt_draw_method method);
>> +
>> +void igt_draw_rect(int fd, drm_intel_bufmgr *bufmgr, drm_intel_context *context,
>> + uint32_t buf_handle, uint32_t buf_size, uint32_t buf_stride,
>> + enum igt_draw_method method, int rect_x, int rect_y,
>> + int rect_w, int rect_h, uint32_t color);
>> +
>> +void igt_draw_rect_fb(int fd, drm_intel_bufmgr *bufmgr,
>> + drm_intel_context *context, struct igt_fb *fb,
>> + enum igt_draw_method method, int rect_x, int rect_y,
>> + int rect_w, int rect_h, uint32_t color);
>> +
>> +void igt_draw_fill_fb(int fd, struct igt_fb *fb, uint32_t color);
>> +
>> +#endif /* __IGT_DRAW_H__ */
>> diff --git a/lib/tests/.gitignore b/lib/tests/.gitignore
>> index a745a23..88f668a 100644
>> --- a/lib/tests/.gitignore
>> +++ b/lib/tests/.gitignore
>> @@ -1,4 +1,5 @@
>> # Please keep sorted alphabetically
>> +igt_draw
>> igt_fork_helper
>> igt_invalid_subtest_name
>> igt_list_only
>> diff --git a/lib/tests/Makefile.sources b/lib/tests/Makefile.sources
>> index ecd73ae..ff66d9d 100644
>> --- a/lib/tests/Makefile.sources
>> +++ b/lib/tests/Makefile.sources
>> @@ -1,4 +1,5 @@
>> check_PROGRAMS = \
>> + igt_draw \
>> igt_no_exit \
>> igt_no_exit_list_only \
>> igt_fork_helper \
>> diff --git a/lib/tests/igt_draw.c b/lib/tests/igt_draw.c
>> new file mode 100644
>> index 0000000..1630cc2
>> --- /dev/null
>> +++ b/lib/tests/igt_draw.c
>> @@ -0,0 +1,247 @@
>> +/*
>> + * Copyright © 2015 Intel Corporation
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a
>> + * copy of this software and associated documentation files (the "Software"),
>> + * to deal in the Software without restriction, including without limitation
>> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
>> + * and/or sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice (including the next
>> + * paragraph) shall be included in all copies or substantial portions of the
>> + * Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
>> + * IN THE SOFTWARE.
>> + *
>> + */
>> +
>> +/* This program tests whether the igt_draw library actually works. */
>> +
>> +#include "drmtest.h"
>> +#include "igt_aux.h"
>> +#include "igt_draw.h"
>> +#include "igt_debugfs.h"
>> +#include "igt_fb.h"
>> +#include "igt_kms.h"
>> +
>> +#define MAX_CONNECTORS 32
>> +
>> +struct modeset_params {
>> + uint32_t crtc_id;
>> + uint32_t connector_id;
>> + drmModeModeInfoPtr mode;
>> +};
>> +
>> +int drm_fd;
>> +drmModeResPtr drm_res;
>> +drmModeConnectorPtr drm_connectors[MAX_CONNECTORS];
>> +drm_intel_bufmgr *bufmgr;
>> +igt_pipe_crc_t *pipe_crc;
>> +
>> +bool has_method_base_crc = false;
>> +igt_crc_t method_base_crc;
>> +
>> +struct modeset_params ms;
>> +
>> +static void find_modeset_params(void)
>> +{
>> + int i;
>> + uint32_t connector_id = 0, crtc_id;
>> + drmModeModeInfoPtr mode = NULL;
>> +
>> + for (i = 0; i < drm_res->count_connectors; i++) {
>> + drmModeConnectorPtr c = drm_connectors[i];
>> +
>> + if (c->count_modes) {
>> + connector_id = c->connector_id;
>> + mode = &c->modes[0];
>> + break;
>> + }
>> + }
>> + igt_require(connector_id);
>> +
>> + crtc_id = drm_res->crtcs[0];
>> + igt_assert(crtc_id);
>> + igt_assert(mode);
>> +
>> + ms.connector_id = connector_id;
>> + ms.crtc_id = crtc_id;
>> + ms.mode = mode;
>> +
>> +}
>> +
>> +static void get_method_crc(enum igt_draw_method method, uint64_t tiling,
>> + igt_crc_t *crc)
>> +{
>> + struct igt_fb fb;
>> + int rc;
>> +
>> + igt_create_fb(drm_fd, ms.mode->hdisplay, ms.mode->vdisplay,
>> + DRM_FORMAT_XRGB8888, tiling, &fb);
>> + igt_draw_rect_fb(drm_fd, bufmgr, NULL, &fb, method,
>> + 0, 0, fb.width, fb.height, 0xFF);
>> +
>> + igt_draw_rect_fb(drm_fd, bufmgr, NULL, &fb, method,
>> + fb.width / 4, fb.height / 4,
>> + fb.width / 2, fb.height / 2, 0xFF00);
>> + igt_draw_rect_fb(drm_fd, bufmgr, NULL, &fb, method,
>> + fb.width / 8, fb.height / 8,
>> + fb.width / 4, fb.height / 4, 0xFF0000);
>> + igt_draw_rect_fb(drm_fd, bufmgr, NULL, &fb, method,
>> + fb.width / 2, fb.height / 2,
>> + fb.width / 3, fb.height / 3, 0xFF00FF);
>> +
>> + rc = drmModeSetCrtc(drm_fd, ms.crtc_id, fb.fb_id, 0, 0,
>> + &ms.connector_id, 1, ms.mode);
>> + igt_assert(rc == 0);
>> +
>> + igt_debug_wait_for_keypress("crc");
>> + igt_pipe_crc_collect_crc(pipe_crc, crc);
>
> Should we just move this igt_debug_wait_for_keypress into
> igt_pipe_crc_collect_crc?
I think I prefer to leave these on the programs because you can then
opt-out of some cases such as when you're getting the reference CRCs.
It doesn't hurt to just add these to the problems, but it can be
annoying if the wait is on the lib and you don't want it.
>
>> +
>> + kmstest_unset_all_crtcs(drm_fd, drm_res);
>> + igt_remove_fb(drm_fd, &fb);
>> +}
>> +
>> +static void draw_method_subtest(enum igt_draw_method method, uint64_t tiling)
>> +{
>> + igt_crc_t crc;
>> +
>> + kmstest_unset_all_crtcs(drm_fd, drm_res);
>> +
>> + find_modeset_params();
>> +
>> + /* Use IGT_DRAW_MMAP_GTT on an untiled buffer as the parameter for
>> + * comparison. Cache the value so we don't recompute it for every single
>> + * subtest. */
>> + if (!has_method_base_crc) {
>> + get_method_crc(IGT_DRAW_MMAP_GTT, LOCAL_DRM_FORMAT_MOD_NONE,
>> + &method_base_crc);
>> + has_method_base_crc = true;
>> + }
>> +
>> + get_method_crc(method, tiling, &crc);
>> + igt_assert_crc_equal(&crc, &method_base_crc);
>> +}
>> +
>> +static void get_fill_crc(uint64_t tiling, igt_crc_t *crc)
>> +{
>> + struct igt_fb fb;
>> + int rc;
>> +
>> + igt_create_fb(drm_fd, ms.mode->hdisplay, ms.mode->vdisplay,
>> + DRM_FORMAT_XRGB8888, tiling, &fb);
>> +
>> + igt_draw_fill_fb(drm_fd, &fb, 0xFF);
>> +
>> + rc = drmModeSetCrtc(drm_fd, ms.crtc_id, fb.fb_id, 0, 0,
>> + &ms.connector_id, 1, ms.mode);
>> + igt_assert(rc == 0);
>> +
>> + igt_debug_wait_for_keypress("crc");
>> + igt_pipe_crc_collect_crc(pipe_crc, crc);
>> +
>> + kmstest_unset_all_crtcs(drm_fd, drm_res);
>> + igt_remove_fb(drm_fd, &fb);
>> +}
>> +
>> +static void fill_fb_subtest(void)
>> +{
>> + int rc;
>> + struct igt_fb fb;
>> + igt_crc_t base_crc, crc;
>> +
>> + kmstest_unset_all_crtcs(drm_fd, drm_res);
>> +
>> + find_modeset_params();
>> +
>> + igt_create_fb(drm_fd, ms.mode->hdisplay, ms.mode->vdisplay,
>> + DRM_FORMAT_XRGB8888, LOCAL_DRM_FORMAT_MOD_NONE, &fb);
>> +
>> + igt_draw_rect_fb(drm_fd, bufmgr, NULL, &fb, IGT_DRAW_MMAP_GTT,
>> + 0, 0, fb.width, fb.height, 0xFF);
>> +
>> + rc = drmModeSetCrtc(drm_fd, ms.crtc_id, fb.fb_id, 0, 0,
>> + &ms.connector_id, 1, ms.mode);
>> + igt_assert(rc == 0);
>> +
>> + igt_debug_wait_for_keypress("crc");
>> + igt_pipe_crc_collect_crc(pipe_crc, &base_crc);
>> +
>> + get_fill_crc(LOCAL_DRM_FORMAT_MOD_NONE, &crc);
>> + igt_assert_crc_equal(&crc, &base_crc);
>> +
>> + get_fill_crc(LOCAL_I915_FORMAT_MOD_X_TILED, &crc);
>> + igt_assert_crc_equal(&crc, &base_crc);
>> +
>> + kmstest_unset_all_crtcs(drm_fd, drm_res);
>> + igt_remove_fb(drm_fd, &fb);
>> +}
>> +
>> +static void setup_environment(void)
>> +{
>> + int i;
>> +
>> + drm_fd = drm_open_any_master();
>> + igt_require(drm_fd >= 0);
>> +
>> + drm_res = drmModeGetResources(drm_fd);
>> + igt_assert(drm_res->count_connectors <= MAX_CONNECTORS);
>> +
>> + for (i = 0; i < drm_res->count_connectors; i++)
>> + drm_connectors[i] = drmModeGetConnector(drm_fd,
>> + drm_res->connectors[i]);
>> +
>> + kmstest_set_vt_graphics_mode();
>> +
>> + bufmgr = drm_intel_bufmgr_gem_init(drm_fd, 4096);
>> + igt_assert(bufmgr);
>> + drm_intel_bufmgr_gem_enable_reuse(bufmgr);
>> +
>> + pipe_crc = igt_pipe_crc_new(0, INTEL_PIPE_CRC_SOURCE_AUTO);
>> +}
>> +
>> +static void teardown_environment(void)
>> +{
>> + int i;
>> +
>> + igt_pipe_crc_free(pipe_crc);
>> +
>> + drm_intel_bufmgr_destroy(bufmgr);
>> +
>> + for (i = 0; i < drm_res->count_connectors; i++)
>> + drmModeFreeConnector(drm_connectors[i]);
>> +
>> + drmModeFreeResources(drm_res);
>> + close(drm_fd);
>> +}
>> +
>> +igt_main
>> +{
>> + enum igt_draw_method method;
>> +
>> + igt_fixture
>> + setup_environment();
>> +
>> + for (method = 0; method < IGT_DRAW_METHOD_COUNT; method++) {
>> + igt_subtest_f("draw-method-%s-untiled",
>> + igt_draw_get_method_name(method))
>> + draw_method_subtest(method, LOCAL_DRM_FORMAT_MOD_NONE);
>> + igt_subtest_f("draw-method-%s-tiled",
>> + igt_draw_get_method_name(method))
>> + draw_method_subtest(method,
>> + LOCAL_I915_FORMAT_MOD_X_TILED);
>> + }
>> +
>> + igt_subtest("fill-fb")
>> + fill_fb_subtest();
>> +
>> + igt_fixture
>> + teardown_environment();
>> +}
>> --
>> 2.1.4
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Paulo Zanoni
More information about the Intel-gfx
mailing list