[Intel-gfx] [PATCH 2/2] i-g-t: Adding display NV12 testcase
Daniel Vetter
daniel at ffwll.ch
Wed May 6 23:48:36 PDT 2015
On Fri, May 01, 2015 at 08:11:39PM -0700, Chandra Konduru wrote:
> From: chandra konduru <chandra.konduru at intel.com>
>
> This patch adds kms_nv12 test case. It covers testing NV12 in
> all supported linear/tile-X/tile-Y/tile-Yf tile formats in
> 0 and 180 orientations. For each tiling format, it tests
> various combinations of planes and scaling.
>
> It has some very preliminary crc support and it is bit flaky.
> Though I have seen once-in-a-while crc check failures, most of the
> time they pass, so enabled by-default. If they cause headaches
> they can be disabled as needed.
Sporadic crc failures are probably watermark issues. Have you seen
underruns reported?
-Daniel
>
> Signed-off-by: chandra konduru <chandra.konduru at intel.com>
> ---
> tests/.gitignore | 1 +
> tests/Android.mk | 1 +
> tests/Makefile.sources | 1 +
> tests/kms_nv12.c | 529 +++++++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 532 insertions(+)
> create mode 100644 tests/kms_nv12.c
>
> diff --git a/tests/.gitignore b/tests/.gitignore
> index 796e330..35c0e6e 100644
> --- a/tests/.gitignore
> +++ b/tests/.gitignore
> @@ -147,6 +147,7 @@ kms_vblank
> kms_crtc_background_color
> kms_plane_scaling
> kms_panel_fitting
> +kms_nv12
> pm_lpsp
> pm_rc6_residency
> pm_rpm
> diff --git a/tests/Android.mk b/tests/Android.mk
> index fac9931..c0c6383 100644
> --- a/tests/Android.mk
> +++ b/tests/Android.mk
> @@ -81,6 +81,7 @@ else
> kms_pwrite_crc \
> kms_pipe_b_c_ivb \
> kms_legacy_colorkey
> + kms_nv12 \
> IGT_LOCAL_CFLAGS += -DANDROID_HAS_CAIRO=0
> endif
>
> diff --git a/tests/Makefile.sources b/tests/Makefile.sources
> index 4cbc50d..b68224e 100644
> --- a/tests/Makefile.sources
> +++ b/tests/Makefile.sources
> @@ -78,6 +78,7 @@ TESTS_progs_M = \
> kms_crtc_background_color \
> kms_plane_scaling \
> kms_panel_fitting \
> + kms_nv12 \
> pm_lpsp \
> pm_rpm \
> pm_rps \
> diff --git a/tests/kms_nv12.c b/tests/kms_nv12.c
> new file mode 100644
> index 0000000..e88c934
> --- /dev/null
> +++ b/tests/kms_nv12.c
> @@ -0,0 +1,529 @@
> +/*
> + * Copyright © 2013,2014 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
> + * IN THE SOFTWARE.
> + *
> + */
> +
> +#include <math.h>
> +#include <fcntl.h>
> +#include <sys/stat.h>
> +
> +#include "drmtest.h"
> +#include "igt_debugfs.h"
> +#include "igt_kms.h"
> +#include "igt_core.h"
> +#include "intel_chipset.h"
> +#include "ioctl_wrappers.h"
> +
> +IGT_TEST_DESCRIPTION("Test display NV12 support");
> +
> +uint32_t devid;
> +typedef struct {
> + int drm_fd;
> + igt_display_t display;
> + igt_crc_t crc1;
> + igt_crc_t crc2;
> + igt_pipe_crc_t *pipe_crc;
> + int num_scalers;
> +
> + struct igt_fb fb1;
> + struct igt_fb fb1_nv12;
> + struct igt_fb fb2;
> + struct igt_fb fb2_nv12;
> + struct igt_fb fb3;
> + struct igt_fb fb3_nv12;
> + int fb_id1;
> + int fb_id1_nv12;
> + int fb_id2;
> + int fb_id2_nv12;
> + int fb_id3;
> + int fb_id3_nv12;
> +
> + igt_plane_t *plane1;
> + igt_plane_t *plane2;
> + igt_plane_t *plane3;
> +
> + uint64_t tiled;
> + int rotation;
> + int crc;
> +} data_t;
> +
> +#define IMG_FILE "1080p-left.png"
> +#define SOLID_COLOR 0xFFFFFF /* BGR 8bpc */
> +
> +static void
> +paint_pattern(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h)
> +{
> + cairo_t *cr;
> +
> + cr = igt_get_cairo_ctx(d->drm_fd, fb);
> + igt_paint_test_pattern(cr, w, h);
> + cairo_destroy(cr);
> +}
> +
> +static void
> +paint_image(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h)
> +{
> + cairo_t *cr;
> +
> + cr = igt_get_cairo_ctx(d->drm_fd, fb);
> + igt_paint_image(cr, IMG_FILE, 0, 0, w, h);
> + cairo_destroy(cr);
> +}
> +
> +static void
> +paint_solid_color(data_t *d, struct igt_fb *fb, uint16_t w, uint16_t h,
> + uint32_t color)
> +{
> + cairo_t *cr;
> + double r, g, b;
> +
> + cr = igt_get_cairo_ctx(d->drm_fd, fb);
> +
> + /* Paint with solid color */
> + r = (double) (color & 0xFF) / 255.0;
> + g = (double) ((color & 0xFF00) >> 8) / 255.0;
> + b = (double) ((color & 0xFF0000) >> 16) / 255.0;
> + igt_paint_color(cr, 0, 0, w, h, r, g, b);
> +
> + cairo_destroy(cr);
> +}
> +
> +static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe,
> + igt_plane_t *plane, drmModeModeInfo *mode, enum igt_commit_style s)
> +{
> + igt_display_t *display = &data->display;
> +
> + igt_output_set_pipe(output, pipe);
> +
> + /* create the pipe_crc object for this pipe */
> + igt_pipe_crc_free(data->pipe_crc);
> + data->pipe_crc = igt_pipe_crc_new(pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
> +
> + /* before allocating, free if any older fb */
> + if (data->fb_id1) {
> + igt_remove_fb(data->drm_fd, &data->fb1);
> + data->fb_id1 = 0;
> + }
> +
> + /* allocate fb for plane 1 */
> + data->fb_id1 = igt_create_fb(data->drm_fd,
> + mode->hdisplay, mode->vdisplay,
> + DRM_FORMAT_XRGB8888,
> + LOCAL_I915_FORMAT_MOD_X_TILED, /* tiled */
> + &data->fb1);
> + igt_assert(data->fb_id1);
> +
> + paint_pattern(data, &data->fb1, mode->hdisplay, mode->vdisplay);
> +
> + /*
> + * We always set the primary plane to actually enable the pipe as
> + * there's no way (that works) to light up a pipe with only a sprite
> + * plane enabled at the moment.
> + */
> + if (!plane->is_primary) {
> + igt_plane_t *primary;
> +
> + primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + igt_plane_set_fb(primary, &data->fb1);
> + }
> +
> + igt_plane_set_fb(plane, &data->fb1);
> + if (s == COMMIT_LEGACY) {
> + int ret;
> + ret = drmModeSetCrtc(data->drm_fd,
> + output->config.crtc->crtc_id,
> + data->fb_id1,
> + plane->pan_x, plane->pan_y,
> + &output->id,
> + 1,
> + mode);
> + igt_assert(ret == 0);
> + } else {
> + igt_display_commit2(display, s);
> + }
> +}
> +
> +static void cleanup_crtc(data_t *data, igt_output_t *output, igt_plane_t *plane)
> +{
> + igt_display_t *display = &data->display;
> +
> + igt_pipe_crc_free(data->pipe_crc);
> + data->pipe_crc = NULL;
> +
> + if (data->fb_id1) {
> + igt_remove_fb(data->drm_fd, &data->fb1);
> + data->fb_id1 = 0;
> + }
> + if (data->fb_id2) {
> + igt_remove_fb(data->drm_fd, &data->fb2);
> + data->fb_id2 = 0;
> + }
> + if (data->fb_id3) {
> + igt_remove_fb(data->drm_fd, &data->fb3);
> + data->fb_id3 = 0;
> + }
> +
> + if (data->fb_id1_nv12) {
> + igt_remove_fb(data->drm_fd, &data->fb1_nv12);
> + data->fb_id1_nv12 = 0;
> + }
> +
> + if (data->fb_id2_nv12) {
> + igt_remove_fb(data->drm_fd, &data->fb2_nv12);
> + data->fb_id2_nv12 = 0;
> + }
> +
> + if (data->fb_id3_nv12) {
> + igt_remove_fb(data->drm_fd, &data->fb3_nv12);
> + data->fb_id3_nv12 = 0;
> + }
> +
> + if (!plane->is_primary) {
> + igt_plane_t *primary;
> +
> + primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + igt_plane_set_fb(primary, NULL);
> + }
> +
> + igt_plane_set_fb(plane, NULL);
> + igt_output_set_pipe(output, PIPE_ANY);
> +
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +}
> +
> +static void test_nv12_plane(data_t *d)
> +{
> + igt_display_t *display = &d->display;
> + igt_output_t *output;
> + enum pipe pipe;
> + int valid_tests = 0;
> + int img_width;
> + int img_height;
> +
> + igt_require(d->display.has_universal_planes);
> + igt_require(d->num_scalers);
> +
> + for_each_connected_output(display, output) {
> + drmModeModeInfo *mode;
> + mode = igt_output_get_mode(output);
> + pipe = output->config.pipe;
> +
> + igt_output_set_pipe(output, pipe);
> +
> + /* get planes */
> + d->plane1 = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + d->plane2 = igt_output_get_plane(output, IGT_PLANE_2);
> + d->plane3 = igt_output_get_plane(output, IGT_PLANE_3);
> +
> + /* set required rotation */
> + igt_plane_set_rotation(d->plane1, d->rotation);
> + igt_plane_set_rotation(d->plane2, d->rotation);
> + igt_plane_set_rotation(d->plane3, d->rotation);
> +
> + /* Set up display with plane 1 */
> + prepare_crtc(d, output, pipe, d->plane1, mode, COMMIT_LEGACY);
> +
> + /* allocate fb2, fb2_nv12, fb1_nv12 with image size */
> + igt_get_image_size(IMG_FILE, &img_width, &img_height);
> +
> + /* fb2 is in RGB format */
> + d->fb_id2 = igt_create_fb(d->drm_fd,
> + img_width, img_height,
> + DRM_FORMAT_XRGB8888,
> + d->tiled, /* tiled */
> + &d->fb2);
> + igt_assert(d->fb_id2);
> +
> + /* fb1_nv12 is in NV12 format */
> + d->fb_id1_nv12 = igt_create_fb(d->drm_fd,
> + img_width, img_height,
> + DRM_FORMAT_NV12,
> + d->tiled, /* tiled */
> + &d->fb1_nv12);
> + igt_assert(d->fb_id1_nv12);
> +
> + /* fb2_nv12 is in NV12 format */
> + d->fb_id2_nv12 = igt_create_fb(d->drm_fd,
> + img_width, img_height,
> + DRM_FORMAT_NV12,
> + d->tiled,
> + &d->fb2_nv12);
> + igt_assert(d->fb_id2_nv12);
> +
> + /* fb3 is in RGB */
> + d->fb_id3 = igt_create_fb(d->drm_fd,
> + mode->hdisplay, mode->vdisplay,
> + DRM_FORMAT_ARGB8888,
> + d->tiled, /* tiled */
> + &d->fb3);
> + igt_assert(d->fb_id3);
> +
> + if (d->crc) {
> + /*
> + * CRC test:
> + * 1st CRC: plane 1: RGB FS, plane 2: RGB 19x10 --> CRC1
> + * 2nd CRC: plane 1: RGB FS, plane 2: NV12 19x10 --> CRC2
> + * make sure CRC1 == CRC2
> + *
> + * For CRCs to work, cannot use any image/data because
> + * chrome-upsampling can fail CRC comparison.
> + * Though it is a very basic, solid color is expected to work
> + */
> + paint_solid_color(d, &d->fb2, d->fb2.width, d->fb2.height,
> + SOLID_COLOR);
> +
> + /* Setup to capture CRC1 when plane 2 is in RGB mode */
> + igt_plane_set_fb(d->plane2, &d->fb2);
> + igt_fb_set_position(&d->fb2, d->plane2, 0, 0);
> + igt_fb_set_size(&d->fb2, d->plane2, d->fb2.width, d->fb2.height);
> + igt_plane_set_position(d->plane2, 0, 0);
> + igt_plane_set_size(d->plane2, d->fb2.width, d->fb2.height);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> + igt_pipe_crc_collect_crc(d->pipe_crc, &d->crc1);
> +
> + /* Setup to capture CRC2 when plane 2 is in NV12 mode */
> + igt_fb_csc_xrgb_to_nv12(d->drm_fd, &d->fb2_nv12, &d->fb2);
> + igt_plane_set_fb(d->plane2, &d->fb2_nv12);
> + igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
> + igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
> + d->fb2_nv12.height);
> + igt_plane_set_position(d->plane2, 0, 0);
> + igt_plane_set_size(d->plane2, d->fb2_nv12.width,d->fb2_nv12.height);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> + igt_pipe_crc_collect_crc(d->pipe_crc, &d->crc2);
> +
> + igt_assert_crc_equal(&d->crc1, &d->crc2);
> + }
> +
> + /*
> + * Non-CRC tests:
> + * Mimicing some not exactly but closer to some real usage
> + */
> +
> + /* set up data for fb2: both fb1_nv12, fb2_nv12 uses this */
> + paint_image(d, &d->fb2, img_width, img_height);
> +
> + /* set up data in fb1_nv12: fb2 RGB-> fb1_nv12 */
> + igt_fb_csc_xrgb_to_nv12(d->drm_fd, &d->fb1_nv12, &d->fb2);
> +
> + /* set up data in fb2_nv12: fb2 RGB-> fb2_nv12 */
> + igt_fb_csc_xrgb_to_nv12(d->drm_fd, &d->fb2_nv12, &d->fb2);
> +
> + /* set up data in fb3 */
> + paint_pattern(d, &d->fb3, d->fb3.width, d->fb3.height);
> +
> + /* Set up fb2_nv12->plane2 mapping. */
> + igt_plane_set_fb(d->plane2, &d->fb2_nv12);
> + /* 2nd plane nv12 windowed - no scaling */
> + igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
> + igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
> + d->fb2_nv12.height);
> + igt_plane_set_position(d->plane2, 0, 0);
> + igt_plane_set_size(d->plane2, d->fb2_nv12.width, d->fb2_nv12.height);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + /* Change primary plane to nv12 full screen: scaling + NV12 */
> + igt_plane_set_fb(d->plane1, &d->fb1_nv12);
> + igt_fb_set_position(&d->fb1_nv12, d->plane1, 0, 0);
> + igt_fb_set_size(&d->fb1_nv12, d->plane1, d->fb1_nv12.width,
> + d->fb1_nv12.height);
> + igt_plane_set_position(d->plane1, 0, 0);
> + igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + /* Set up fb3->plane3 mapping. */
> + igt_plane_set_fb(d->plane3, &d->fb3);
> +
> + /* 3rd plane full screen - no scaling. */
> + igt_fb_set_position(&d->fb3, d->plane3, 0, 0);
> + igt_fb_set_size(&d->fb3, d->plane3, d->fb3.width, d->fb3.height);
> + igt_plane_set_position(d->plane3, 0, 0);
> + igt_plane_set_size(d->plane3, d->fb3.width, d->fb3.height);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + /* 2nd plane nv12 up scaling */
> + igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
> + igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
> + d->fb2_nv12.height);
> + igt_plane_set_position(d->plane2, 100, 100);
> + igt_plane_set_size(d->plane2, mode->hdisplay-200, mode->vdisplay-200);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + /* 2nd plane nv12 down scaling */
> + igt_fb_set_position(&d->fb2_nv12, d->plane2, 0, 0);
> + igt_fb_set_size(&d->fb2_nv12, d->plane2, d->fb2_nv12.width,
> + d->fb2_nv12.height);
> + igt_plane_set_position(d->plane2, 1024, 0);
> + igt_plane_set_size(d->plane2, d->fb2_nv12.width * 2/3,
> + d->fb2_nv12.height * 2/3);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + /* Back to single plane mode - rgb & no scaling */
> + igt_plane_set_fb(d->plane1, &d->fb1);
> + igt_plane_set_fb(d->plane2, NULL);
> + igt_plane_set_fb(d->plane3, NULL);
> + igt_fb_set_position(&d->fb1, d->plane1, 0, 0);
> + igt_fb_set_size(&d->fb1, d->plane1, mode->hdisplay, mode->vdisplay);
> + igt_plane_set_position(d->plane1, 0, 0);
> + igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + /* single plane mode - rgb & scaling */
> + igt_plane_set_fb(d->plane1, &d->fb1);
> + igt_fb_set_position(&d->fb1, d->plane1, 0, 0);
> + igt_fb_set_size(&d->fb1, d->plane1, d->fb1.width/2, d->fb1.height/2);
> + igt_plane_set_position(d->plane1, 0, 0);
> + igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + /* single plane mode - nv12 & scaling */
> + igt_plane_set_fb(d->plane1, &d->fb1_nv12);
> + igt_fb_set_position(&d->fb1_nv12, d->plane1, 0, 0);
> + igt_fb_set_size(&d->fb1_nv12, d->plane1, d->fb1_nv12.width,
> + d->fb1_nv12.height);
> + igt_plane_set_position(d->plane1, 0, 0);
> + igt_plane_set_size(d->plane1, mode->hdisplay, mode->vdisplay);
> + igt_display_commit2(display, COMMIT_UNIVERSAL);
> +
> + valid_tests++;
> +
> + cleanup_crtc(d, output, d->plane1);
> + }
> + igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
> +}
> +
> +static void test_nv12_unsupported_plane(data_t *d)
> +{
> + igt_display_t *display = &d->display;
> + igt_output_t *output;
> + enum pipe pipe;
> + int valid_tests = 0;
> +
> + igt_require(d->display.has_universal_planes);
> + igt_require(d->num_scalers);
> +
> + for_each_connected_output(display, output) {
> + drmModeModeInfo *mode;
> + mode = igt_output_get_mode(output);
> + pipe = output->config.pipe;
> +
> + igt_output_set_pipe(output, pipe);
> +
> + /* Set up display with plane 1 */
> + d->plane1 = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
> + prepare_crtc(d, output, pipe, d->plane1, mode, COMMIT_LEGACY);
> +
> + d->fb_id3_nv12 = igt_create_fb(d->drm_fd,
> + 1920, 1080,
> + DRM_FORMAT_NV12,
> + d->tiled,
> + &d->fb3_nv12);
> + igt_assert(d->fb_id3_nv12);
> +
> + /* Set up fb3_nv12->plane3 mapping. */
> + d->plane2 = igt_output_get_plane(output, IGT_PLANE_3);
> + igt_plane_set_fb(d->plane3, &d->fb3_nv12);
> +
> + /* 3rd plane nv12 windowed - no scaling */
> + igt_fb_set_position(&d->fb3_nv12, d->plane3, 0, 0);
> + igt_fb_set_size(&d->fb3_nv12, d->plane3, d->fb3_nv12.width,
> + d->fb3_nv12.height);
> + igt_plane_set_position(d->plane3, 0, 0);
> + igt_plane_set_size(d->plane3, d->fb3_nv12.width, d->fb3_nv12.height);
> +
> + /* Should fail because NV12 is not supported on plane 3 */
> + igt_assert(igt_display_try_commit2(display, COMMIT_UNIVERSAL)
> + == -EINVAL);
> +
> + valid_tests++;
> +
> + igt_plane_set_fb(d->plane3, NULL);
> + cleanup_crtc(d, output, d->plane1);
> + }
> + igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
> +}
> +
> +igt_main
> +{
> + data_t data = {};
> +
> + igt_skip_on_simulation();
> +
> + igt_fixture {
> + data.drm_fd = drm_open_any();
> +
> + kmstest_set_vt_graphics_mode();
> +
> + igt_require_pipe_crc();
> +
> + igt_display_init(&data.display, data.drm_fd);
> + }
> + devid = intel_get_drm_devid(data.drm_fd);
> +
> + data.num_scalers = intel_gen(devid) >= 9 ? 2 : 0;
> +
> + data.crc = 1;
> + data.rotation = IGT_ROTATION_0;
> + igt_subtest_f("nv12-plane-linear") {
> + data.tiled = LOCAL_DRM_FORMAT_MOD_NONE;
> + test_nv12_plane(&data);
> + }
> + igt_subtest_f("nv12-plane-tile-x") {
> + data.tiled = LOCAL_I915_FORMAT_MOD_X_TILED;
> + test_nv12_plane(&data);
> + }
> + igt_subtest_f("nv12-plane-tile-y") {
> + data.tiled = LOCAL_I915_FORMAT_MOD_Y_TILED;
> + test_nv12_plane(&data);
> + }
> + igt_subtest_f("nv12-plane-tile-yf") {
> + data.tiled = LOCAL_I915_FORMAT_MOD_Yf_TILED;
> + test_nv12_plane(&data);
> + }
> +
> + data.rotation = IGT_ROTATION_180;
> + igt_subtest_f("nv12-plane-linear-rot-180") {
> + data.tiled = LOCAL_DRM_FORMAT_MOD_NONE;
> + test_nv12_plane(&data);
> + }
> + igt_subtest_f("nv12-plane-tile-x-rot-180") {
> + data.tiled = LOCAL_I915_FORMAT_MOD_X_TILED;
> + test_nv12_plane(&data);
> + }
> + igt_subtest_f("nv12-plane-tile-y-rot-180") {
> + data.tiled = LOCAL_I915_FORMAT_MOD_Y_TILED;
> + test_nv12_plane(&data);
> + }
> + igt_subtest_f("nv12-plane-tile-yf-rot-180") {
> + data.tiled = LOCAL_I915_FORMAT_MOD_Yf_TILED;
> + test_nv12_plane(&data);
> + }
> +
> + igt_subtest_f("nv12-on-unsupported-plane") {
> + data.tiled = LOCAL_DRM_FORMAT_MOD_NONE;
> + test_nv12_unsupported_plane(&data);
> + }
> +
> + igt_fixture {
> + igt_display_fini(&data.display);
> + }
> +}
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the Intel-gfx
mailing list