[Intel-gfx] [PATCH v2 2/9] drm/i915: Send GCP infoframes for deep color HDMI sinks
Ander Conselvan De Oliveira
conselvan2 at gmail.com
Mon May 25 05:32:52 PDT 2015
On Tue, 2015-05-05 at 17:06 +0300, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> GCP infoframes are required to inform the HDMI sink about the color
> depth.
>
> Send the GCP infoframe whenever the sink supports any deep color modes
> since such sinks must anyway be capable of receiving them. For sinks
> that don't support deep color let's skip the GCP in case it might
> confuse the sink, although HDMI 1.4 spec does say all sinks must be
> capable of reciving them. In theory we could skip the GCP infoframe
> for deep color sinks in 8bpc mode as well since sinks must fall back to
> 8bpc whenever GCP isn't received for some time.
>
> BSpec says we should disable GCP after disabling the port, so do that as
> well.
>
> v2: s/intel_set_gcp_infoframe/intel_hdmi_set_gcp_infoframe/
> Rebased due to crtc->config changes
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 3 ++
> drivers/gpu/drm/i915/intel_hdmi.c | 74 +++++++++++++++++++++++++++++++++++++++
> 2 files changed, 77 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index e619e41..dcd93b5 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6010,6 +6010,9 @@ enum skl_disp_power_wells {
> #define _VIDEO_DIP_CTL_A 0xe0200
> #define _VIDEO_DIP_DATA_A 0xe0208
> #define _VIDEO_DIP_GCP_A 0xe0210
> +#define GCP_COLOR_INDICATION (1 << 2)
> +#define GCP_DEFAULT_PHASE_ENABLE (1 << 1)
> +#define GCP_AV_MUTE (1 << 0)
>
> #define _VIDEO_DIP_CTL_B 0xe1200
> #define _VIDEO_DIP_DATA_B 0xe1208
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 79cf445..87c4905 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -541,6 +541,66 @@ static void g4x_set_infoframes(struct drm_encoder *encoder,
> intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode);
> }
>
> +static bool hdmi_sink_is_deep_color(struct drm_encoder *encoder)
> +{
> + struct drm_device *dev = encoder->dev;
> + struct drm_connector *connector;
> +
> + WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
> +
> + /*
> + * HDMI cloning is only supported on g4x which doesn't
> + * support deep color or GCP infoframes anyway so no
> + * need to worry about multiple HDMI sinks here.
> + */
> + list_for_each_entry(connector, &dev->mode_config.connector_list, head)
> + if (connector->encoder == encoder)
> + return connector->display_info.bpc > 8;
> +
> + return false;
> +}
> +
> +static bool intel_hdmi_set_gcp_infoframe(struct drm_encoder *encoder)
> +{
> + struct drm_i915_private *dev_priv = encoder->dev->dev_private;
> + struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
> + u32 reg, val = 0;
> +
> + if (HAS_DDI(dev_priv))
> + reg = HSW_TVIDEO_DIP_GCP(crtc->config->cpu_transcoder);
> + else if (IS_VALLEYVIEW(dev_priv))
> + reg = VLV_TVIDEO_DIP_GCP(crtc->pipe);
> + else if (HAS_PCH_SPLIT(dev_priv->dev))
> + reg = TVIDEO_DIP_GCP(crtc->pipe);
> + else
> + return false;
> +
> + /* Indicate color depth wheneven the sink supports deep color */
> + if (hdmi_sink_is_deep_color(encoder))
> + val |= GCP_COLOR_INDICATION;
> +
> + I915_WRITE(reg, val);
> +
> + return val != 0;
> +}
> +
> +static void intel_disable_gcp_infoframe(struct intel_crtc *crtc)
> +{
> + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
> + u32 reg;
> +
> + if (HAS_DDI(dev_priv))
> + reg = HSW_TVIDEO_DIP_CTL(crtc->config->cpu_transcoder);
> + else if (IS_VALLEYVIEW(dev_priv))
> + reg = VLV_TVIDEO_DIP_CTL(crtc->pipe);
> + else if (HAS_PCH_SPLIT(dev_priv->dev))
> + reg = TVIDEO_DIP_CTL(crtc->pipe);
> + else
> + return;
> +
> + I915_WRITE(reg, I915_READ(reg) & ~VIDEO_DIP_ENABLE_GCP);
> +}
> +
> static void ibx_set_infoframes(struct drm_encoder *encoder,
> bool enable,
> struct drm_display_mode *adjusted_mode)
> @@ -581,6 +641,9 @@ static void ibx_set_infoframes(struct drm_encoder *encoder,
> val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
> VIDEO_DIP_ENABLE_GCP);
>
> + if (intel_hdmi_set_gcp_infoframe(encoder))
> + val |= VIDEO_DIP_ENABLE_GCP;
> +
> I915_WRITE(reg, val);
> POSTING_READ(reg);
>
> @@ -618,6 +681,9 @@ static void cpt_set_infoframes(struct drm_encoder *encoder,
> val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
> VIDEO_DIP_ENABLE_GCP);
>
> + if (intel_hdmi_set_gcp_infoframe(encoder))
> + val |= VIDEO_DIP_ENABLE_GCP;
> +
> I915_WRITE(reg, val);
> POSTING_READ(reg);
>
> @@ -666,6 +732,9 @@ static void vlv_set_infoframes(struct drm_encoder *encoder,
> val &= ~(VIDEO_DIP_ENABLE_AVI | VIDEO_DIP_ENABLE_VENDOR |
> VIDEO_DIP_ENABLE_GAMUT | VIDEO_DIP_ENABLE_GCP);
>
> + if (intel_hdmi_set_gcp_infoframe(encoder))
> + val |= VIDEO_DIP_ENABLE_GCP;
> +
> I915_WRITE(reg, val);
> POSTING_READ(reg);
>
> @@ -695,6 +764,9 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
> val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_GCP_HSW |
> VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW);
>
> + if (intel_hdmi_set_gcp_infoframe(encoder))
> + val |= VIDEO_DIP_ENABLE_GCP_HSW;
> +
> I915_WRITE(reg, val);
> POSTING_READ(reg);
>
> @@ -986,6 +1058,8 @@ static void intel_disable_hdmi(struct intel_encoder *encoder)
>
> if (IS_CHERRYVIEW(dev))
> chv_powergate_phy_lanes(encoder, 0xf);
> +
> + intel_disable_gcp_infoframe(to_intel_crtc(encoder->base.crtc));
BSpec says this should be disabled after disabling TRANS_DDI_FUNC_CTL,
so shouldn't this go in post_disable?
Ander
> }
>
> static int hdmi_portclock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit)
More information about the Intel-gfx
mailing list