[Intel-gfx] [PATCH 12/21] drm/i915: Move SKL hw stride calculation into a helper

ville.syrjala at linux.intel.com ville.syrjala at linux.intel.com
Mon Feb 15 20:54:50 UTC 2016


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

We repeat the SKL stride register value calculations a several places.
Move it into a small helper function.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 52 +++++++++++++++++-------------------
 drivers/gpu/drm/i915/intel_drv.h     |  2 ++
 drivers/gpu/drm/i915/intel_sprite.c  | 12 ++-------
 3 files changed, 29 insertions(+), 37 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 1561923906a1..66794681b2ba 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3192,6 +3192,28 @@ static void skl_detach_scalers(struct intel_crtc *intel_crtc)
 	}
 }
 
+u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
+		     unsigned int rotation)
+{
+	const struct drm_i915_private *dev_priv = to_i915(fb->dev);
+	u32 stride = intel_fb_pitch(fb, plane, rotation);
+
+	/*
+	 * The stride is either expressed as a multiple of 64 bytes chunks for
+	 * linear buffers or in number of tiles for tiled buffers.
+	 */
+	if (intel_rotation_90_or_270(rotation)) {
+		int cpp = drm_format_plane_cpp(fb->pixel_format, plane);
+
+		stride /= intel_tile_height(dev_priv, fb->modifier[0], cpp);
+	} else {
+		stride /= intel_fb_stride_alignment(dev_priv, fb->modifier[0],
+						    fb->pixel_format);
+	}
+
+	return stride;
+}
+
 u32 skl_plane_ctl_format(uint32_t pixel_format)
 {
 	switch (pixel_format) {
@@ -3282,8 +3304,9 @@ static void skylake_update_primary_plane(struct drm_plane *plane,
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
 	struct drm_framebuffer *fb = plane_state->base.fb;
 	int pipe = intel_crtc->pipe;
-	u32 plane_ctl, stride;
+	u32 plane_ctl;
 	unsigned int rotation = plane_state->base.rotation;
+	u32 stride = skl_plane_stride(fb, 0, rotation);
 	u32 surf_addr;
 	int scaler_id = plane_state->scaler_id;
 	int src_x = plane_state->src.x1 >> 16;
@@ -3311,8 +3334,6 @@ static void skylake_update_primary_plane(struct drm_plane *plane,
 			.y1 = src_y,
 			.y2 = src_y + src_h,
 		};
-		int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
-		struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
 
 		/* Rotate src coordinates to match rotated GTT view */
 		drm_rect_rotate(&r, fb->width, fb->height, BIT(DRM_ROTATE_270));
@@ -3321,13 +3342,6 @@ static void skylake_update_primary_plane(struct drm_plane *plane,
 		src_y = r.y1;
 		src_w = drm_rect_width(&r);
 		src_h = drm_rect_height(&r);
-
-		stride = intel_fb->rotated[0].pitch /
-			intel_tile_height(dev_priv, fb->modifier[0], cpp);
-	} else {
-		stride = fb->pitches[0] /
-			intel_fb_stride_alignment(dev_priv, fb->modifier[0],
-						  fb->pixel_format);
 	}
 
 	intel_add_fb_offsets(&src_x, &src_y, fb, 0, rotation);
@@ -11542,7 +11556,7 @@ static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
 	const enum pipe pipe = intel_crtc->pipe;
-	u32 ctl, stride;
+	u32 ctl, stride = skl_plane_stride(fb, 0, rotation);
 
 	ctl = I915_READ(PLANE_CTL(pipe, 0));
 	ctl &= ~PLANE_CTL_TILED_MASK;
@@ -11563,22 +11577,6 @@ static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
 	}
 
 	/*
-	 * The stride is either expressed as a multiple of 64 bytes chunks for
-	 * linear buffers or in number of tiles for tiled buffers.
-	 */
-	if (intel_rotation_90_or_270(rotation)) {
-		int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
-		struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
-
-		stride = intel_fb->rotated[0].pitch /
-			intel_tile_height(dev_priv, fb->modifier[0], cpp);
-	} else {
-		stride = fb->pitches[0] /
-			intel_fb_stride_alignment(dev_priv, fb->modifier[0],
-						  fb->pixel_format);
-	}
-
-	/*
 	 * Both PLANE_CTL and PLANE_STRIDE are not updated on vblank but on
 	 * PLANE_SURF updates, the update is then guaranteed to be atomic.
 	 */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 40cbe5c6163c..a32470acf529 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1236,6 +1236,8 @@ u32 intel_fb_gtt_offset(struct drm_framebuffer *fb, unsigned int rotation);
 u32 skl_plane_ctl_format(uint32_t pixel_format);
 u32 skl_plane_ctl_tiling(uint64_t fb_modifier);
 u32 skl_plane_ctl_rotation(unsigned int rotation);
+u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
+		     unsigned int rotation);
 
 /* intel_csr.c */
 void intel_csr_ucode_init(struct drm_i915_private *);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 31be24f27207..94dd27045b51 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -186,13 +186,13 @@ skl_update_plane(struct drm_plane *drm_plane,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_plane *intel_plane = to_intel_plane(drm_plane);
 	struct drm_framebuffer *fb = plane_state->base.fb;
-	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
 	const int pipe = intel_plane->pipe;
 	const int plane = intel_plane->plane + 1;
-	u32 plane_ctl, stride;
+	u32 plane_ctl;
 	const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
 	u32 surf_addr;
 	unsigned int rotation = plane_state->base.rotation;
+	u32 stride = skl_plane_stride(fb, 0, rotation);
 	int crtc_x = plane_state->dst.x1;
 	int crtc_y = plane_state->dst.y1;
 	uint32_t crtc_w = drm_rect_width(&plane_state->dst);
@@ -231,7 +231,6 @@ skl_update_plane(struct drm_plane *drm_plane,
 			.y1 = y,
 			.y2 = y + src_h,
 		};
-		unsigned int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
 
 		/* Rotate src coordinates to match rotated GTT view */
 		drm_rect_rotate(&r, fb->width, fb->height, BIT(DRM_ROTATE_270));
@@ -240,13 +239,6 @@ skl_update_plane(struct drm_plane *drm_plane,
 		y = r.y1;
 		src_w = drm_rect_width(&r);
 		src_h = drm_rect_height(&r);
-
-		stride = intel_fb->rotated[0].pitch /
-			intel_tile_height(dev_priv, fb->modifier[0], cpp);
-	} else {
-		stride = fb->pitches[0] /
-			intel_fb_stride_alignment(dev_priv, fb->modifier[0],
-						  fb->pixel_format);
 	}
 
 	intel_add_fb_offsets(&x, &y, fb, 0, rotation);
-- 
2.4.10



More information about the Intel-gfx mailing list