[Intel-gfx] [PATCH i-g-t] tests/gem_softpin: Use offset addresses in canonical form
Belgaumkar, Vinay
vinay.belgaumkar at intel.com
Tue Jan 5 10:33:45 PST 2016
-----Original Message-----
From: Thierry, Michel
Sent: Tuesday, January 5, 2016 10:02 AM
To: Belgaumkar, Vinay
Subject: RE: [Intel-gfx] [PATCH i-g-t] tests/gem_softpin: Use offset addresses in canonical form
> -----Original Message-----
> From: Intel-gfx [mailto:intel-gfx-bounces at lists.freedesktop.org] On Behalf
> Of Michel Thierry
> Sent: Friday, December 11, 2015 2:14 PM
> To: intel-gfx at lists.freedesktop.org
> Subject: [Intel-gfx] [PATCH i-g-t] tests/gem_softpin: Use offset addresses
> in
> canonical form
>
> i915 validates that requested offset is in canonical form, so tests need
> to convert the offsets as required.
>
> Also add test to verify non-canonical 48-bit address will be rejected.
>
> Signed-off-by: Michel Thierry <michel.thierry at intel.com>
> Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar at intel.com>
> ---
> tests/gem_softpin.c | 66 +++++++++++++++++++++++++++++++++++++---
> -------------
> 1 file changed, 46 insertions(+), 20 deletions(-)
>
> diff --git a/tests/gem_softpin.c b/tests/gem_softpin.c
> index 7bee16b..2981b30 100644
> --- a/tests/gem_softpin.c
> +++ b/tests/gem_softpin.c
> @@ -67,7 +67,7 @@ static void *create_mem_buffer(uint64_t size);
> static int gem_call_userptr_ioctl(int fd, i915_gem_userptr *userptr);
> static void gem_pin_userptr_test(void);
> static void gem_pin_bo_test(void);
> -static void gem_pin_invalid_vma_test(bool test_decouple_flags);
> +static void gem_pin_invalid_vma_test(bool test_decouple_flags, bool
> test_canonical_offset);
> static void gem_pin_overlap_test(void);
> static void gem_pin_high_address_test(void);
>
> @@ -198,6 +198,15 @@ static void setup_exec_obj(struct
> drm_i915_gem_exec_object2 *exec,
> exec->offset = offset;
> }
>
> +/* gen8_canonical_addr
> + * Used to convert any address into canonical form, i.e. [63:48] == [47].
> + * @address - a virtual address
> +*/
> +static uint64_t gen8_canonical_addr(uint64_t address)
> +{
> + return ((int64_t)address << 16) >> 16;
> +}
> +
> /* gem_store_data_svm
> * populate batch buffer with MI_STORE_DWORD_IMM command
> * @fd: drm file descriptor
> @@ -630,6 +639,7 @@ static void gem_pin_overlap_test(void)
> * Share with GPU using userptr ioctl
> * Create batch buffer to write DATA in first element of each buffer
> * Pin each buffer to varying addresses starting from 0x800000000000 going
> below
> + * (requires offsets in canonical form)
> * Execute Batch Buffer on Blit ring STRESS_NUM_LOOPS times
> * Validate every buffer has DATA in first element
> * Rinse and Repeat on Render ring
> @@ -637,7 +647,7 @@ static void gem_pin_overlap_test(void)
> #define STRESS_NUM_BUFFERS 100000
> #define STRESS_NUM_LOOPS 100
> #define STRESS_STORE_COMMANDS 4 * STRESS_NUM_BUFFERS
> -
> +#define STRESS_START_ADDRESS 0x800000000000
> static void gem_softpin_stress_test(void)
> {
> i915_gem_userptr userptr;
> @@ -650,7 +660,7 @@ static void gem_softpin_stress_test(void)
> uint32_t batch_buf_handle;
> int ring, len;
> int buf, loop;
> - uint64_t pinning_offset = 0x800000000000;
> + uint64_t pinning_offset = STRESS_START_ADDRESS;
>
> fd = drm_open_driver(DRIVER_INTEL);
> igt_require(uses_full_ppgtt(fd, FULL_48_BIT_PPGTT));
> @@ -680,10 +690,10 @@ static void gem_softpin_stress_test(void)
> setup_exec_obj(&exec_object2[buf], shared_handle[buf],
> EXEC_OBJECT_PINNED |
> EXEC_OBJECT_SUPPORTS_48B_ADDRESS,
> - pinning_offset);
> + gen8_canonical_addr(pinning_offset));
> len += gem_store_data_svm(fd, batch_buffer + (len/4),
> - pinning_offset, buf,
> - (buf == STRESS_NUM_BUFFERS-1)?
> \
> +
> gen8_canonical_addr(pinning_offset),
> + buf, (buf ==
> STRESS_NUM_BUFFERS-1)? \
> true:false);
>
> /* decremental 4K aligned address */
> @@ -705,10 +715,11 @@ static void gem_softpin_stress_test(void)
> for (loop = 0; loop < STRESS_NUM_LOOPS; loop++) {
> submit_and_sync(fd, &execbuf, batch_buf_handle);
> /* Set pinning offset back to original value */
> - pinning_offset = 0x800000000000;
> + pinning_offset = STRESS_START_ADDRESS;
> for(buf = 0; buf < STRESS_NUM_BUFFERS; buf++) {
> gem_userptr_sync(fd, shared_handle[buf]);
> - igt_assert(exec_object2[buf].offset ==
> pinning_offset);
> + igt_assert(exec_object2[buf].offset ==
> +
> gen8_canonical_addr(pinning_offset));
> igt_fail_on_f(*shared_buffer[buf] != buf, \
> "Mismatch in buffer %d, iteration %d:
> 0x%08X\n", \
> buf, loop, *shared_buffer[buf]);
> @@ -727,10 +738,11 @@ static void gem_softpin_stress_test(void)
> STRESS_NUM_BUFFERS + 1, len);
> for (loop = 0; loop < STRESS_NUM_LOOPS; loop++) {
> submit_and_sync(fd, &execbuf, batch_buf_handle);
> - pinning_offset = 0x800000000000;
> + pinning_offset = STRESS_START_ADDRESS;
> for(buf = 0; buf < STRESS_NUM_BUFFERS; buf++) {
> gem_userptr_sync(fd, shared_handle[buf]);
> - igt_assert(exec_object2[buf].offset ==
> pinning_offset);
> + igt_assert(exec_object2[buf].offset ==
> + gen8_canonical_addr(pinning_offset));
> igt_fail_on_f(*shared_buffer[buf] != buf, \
> "Mismatch in buffer %d, \
> iteration %d: 0x%08X\n", buf, loop,
> *shared_buffer[buf]);
> @@ -837,12 +849,14 @@ static void gem_write_multipage_buffer_test(void)
> * This test will request to pin a shared buffer to an invalid
> * VMA > 48-bit address if system supports 48B PPGTT; it also
> * will test that any attempt of using a 48-bit address requires
> - * the SUPPORTS_48B_ADDRESS flag.
> + * the SUPPORTS_48B_ADDRESS flag, and that 48-bit address need to be
> + * in canonical form (bits [63:48] == [47]).
> * If system supports 32B PPGTT, it will test the equivalent invalid VMA
> * Create shared buffer of size 4K
> * Try and Pin object to invalid address
> */
> -static void gem_pin_invalid_vma_test(bool test_decouple_flags)
> +static void gem_pin_invalid_vma_test(bool test_decouple_flags,
> + bool test_canonical_offset)
> {
> i915_gem_userptr userptr;
> int fd, ret;
> @@ -852,6 +866,7 @@ static void gem_pin_invalid_vma_test(bool
> test_decouple_flags)
> uint32_t shared_buf_handle;
> int ring;
> uint64_t invalid_address_for_48b = 0x9000000000000; /* 52 bit
> address */
> + uint64_t noncanonical_address_for_48b = 0xFF0000000000; /* 48 bit
> address in noncanonical form */
> uint64_t invalid_address_for_32b = 0x900000000; /* 36 bit address */
>
> fd = drm_open_driver(DRIVER_INTEL);
> @@ -865,7 +880,11 @@ static void gem_pin_invalid_vma_test(bool
> test_decouple_flags)
> /* share with GPU */
> shared_buf_handle = init_userptr(fd, &userptr, shared_buffer,
> BO_SIZE);
>
> - if (uses_full_ppgtt(fd, FULL_48_BIT_PPGTT) &&
> !test_decouple_flags) {
> + if (uses_full_ppgtt(fd, FULL_48_BIT_PPGTT) &&
> test_canonical_offset) {
> + setup_exec_obj(&exec_object2[0], shared_buf_handle,
> + EXEC_OBJECT_PINNED |
> EXEC_OBJECT_SUPPORTS_48B_ADDRESS,
> + noncanonical_address_for_48b);
> + } else if (uses_full_ppgtt(fd, FULL_48_BIT_PPGTT) &&
> !test_decouple_flags) {
> setup_exec_obj(&exec_object2[0], shared_buf_handle,
> EXEC_OBJECT_PINNED |
> EXEC_OBJECT_SUPPORTS_48B_ADDRESS,
> invalid_address_for_48b);
> @@ -965,7 +984,10 @@ static void gem_pin_high_address_test(void)
> * This test will create a shared buffer,
> * and create a command for GPU to write data in it. It will attempt
> * to pin the buffer at address > 47 bits <= 48-bit.
> - * CPU will read and make sure expected value is obtained
> + * CPU will read and make sure expected value is obtained.
> + * Note that we must submit addresses in canonical form, not only
> + * because the addresss will be validated, but also the returned offset
> + * will be in this format.
>
> * Malloc a 4K buffer
> * Share buffer with with GPU by using userptr ioctl
> @@ -990,7 +1012,7 @@ static void gem_pin_near_48Bit_test(void)
> uint32_t batch_buf_handle, shared_buf_handle;
> int ring, len;
> const uint32_t data = 0x12345678;
> - uint64_t high_address;
> + uint64_t high_address, can_high_address;
>
> fd = drm_open_driver(DRIVER_INTEL);
> igt_require(uses_full_ppgtt(fd, FULL_48_BIT_PPGTT));
> @@ -1007,14 +1029,15 @@ static void gem_pin_near_48Bit_test(void)
>
> for (high_address = BEGIN_HIGH_ADDRESS; high_address <=
> END_HIGH_ADDRESS;
>
> high_address+=ADDRESS_INCREMENT) {
> + can_high_address = gen8_canonical_addr(high_address);
> /* create command buffer with write command */
> - len = gem_store_data_svm(fd, batch_buffer, high_address,
> + len = gem_store_data_svm(fd, batch_buffer,
> can_high_address,
> data, true);
> gem_write(fd, batch_buf_handle, 0, batch_buffer, len);
> /* submit command buffer */
> setup_exec_obj(&exec_object2[0], shared_buf_handle,
> EXEC_OBJECT_PINNED |
> EXEC_OBJECT_SUPPORTS_48B_ADDRESS,
> - high_address);
> + can_high_address);
> setup_exec_obj(&exec_object2[1], batch_buf_handle, 0, 0);
>
> ring = I915_EXEC_RENDER;
> @@ -1022,7 +1045,7 @@ static void gem_pin_near_48Bit_test(void)
> submit_and_sync(fd, &execbuf, batch_buf_handle);
> gem_userptr_sync(fd, shared_buf_handle);
>
> - igt_assert(exec_object2[0].offset == high_address);
> + igt_assert(exec_object2[0].offset == can_high_address);
> /* check on CPU to see if value changes */
> igt_fail_on_f(shared_buffer[0] != data,
> "\nCPU read does not match GPU write, expected: 0x%x, \
> @@ -1063,12 +1086,15 @@ int main(int argc, char* argv[])
>
> /* Following tests need 32/48 Bit PPGTT support */
> igt_subtest("gem_pin_invalid_vma") {
> - gem_pin_invalid_vma_test(false);
> + gem_pin_invalid_vma_test(false, false);
> }
>
> /* Following tests need 48 Bit PPGTT support */
> + igt_subtest("gen_pin_noncanonical_high_address") {
> + gem_pin_invalid_vma_test(false, true);
> + }
> igt_subtest("gem_pin_high_address_without_correct_flag") {
> - gem_pin_invalid_vma_test(true);
> + gem_pin_invalid_vma_test(true, false);
> }
> igt_subtest("gem_softpin_stress") {
> gem_softpin_stress_test();
> --
> 2.6.3
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
More information about the Intel-gfx
mailing list