[Intel-gfx] [PATCH 2/7] drm/i915/skl+: Use fb size for relative data rate calculation

[Matt Roper]

On Thu, Jan 14, 2016 at 05:32:43PM +0530, Shobhit Kumar wrote:
> From: "Kumar, Mahesh" <mahesh1.kumar at intel.com>
> 
> Use FB size for relative data rate calculation. don't always use

Minor wording nitpick:  it's not really the FB size you're using here
but rather the plane size.  The FB itself may be larger than the plane
and largely offscreen.

> pipe source width & height.
> adjust height & width according to rotation.
> 
> Signed-off-by: Kumar, Mahesh <mahesh1.kumar at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_pm.c | 42 ++++++++++++++++++++++++++++++++---------
>  1 file changed, 33 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 68f21b9..d33c4ff 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2928,24 +2928,33 @@ skl_plane_relative_data_rate(const struct intel_crtc_state *cstate,
>  			     int y)
>  {
>  	struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
> +	struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate);
>  	struct drm_framebuffer *fb = pstate->fb;
> +	uint32_t width = 0, height = 0;
> +
> +	if (drm_rect_width(&intel_pstate->src)) {
> +		width = drm_rect_width(&intel_pstate->src) >> 16;
> +		height = drm_rect_height(&intel_pstate->src) >> 16;
> +	} else {
> +		width = intel_crtc->config->pipe_src_w;
> +		height = intel_crtc->config->pipe_src_h;

The else block would mean the plane is invisible (either off or fully
clipped), right?  Shouldn't our relative data rate be 0 in that case
(instead of max possible)?


> +	}
> +
> +	if (intel_rotation_90_or_270(pstate->rotation))
> +		swap(width, height);
>  
>  	/* for planar format */
>  	if (fb->pixel_format == DRM_FORMAT_NV12) {
>  		if (y)  /* y-plane data rate */
> -			return intel_crtc->config->pipe_src_w *
> -				intel_crtc->config->pipe_src_h *
> +			return width * height *
>  				drm_format_plane_cpp(fb->pixel_format, 0);
>  		else    /* uv-plane data rate */
> -			return (intel_crtc->config->pipe_src_w/2) *
> -				(intel_crtc->config->pipe_src_h/2) *
> +			return (width / 2) * (height / 2) *
>  				drm_format_plane_cpp(fb->pixel_format, 1);
>  	}
>  
>  	/* for packed formats */
> -	return intel_crtc->config->pipe_src_w *
> -		intel_crtc->config->pipe_src_h *
> -		drm_format_plane_cpp(fb->pixel_format, 0);
> +	return width * height * drm_format_plane_cpp(fb->pixel_format, 0);
>  }
>  
>  /*
> @@ -3181,10 +3190,25 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
>  	uint32_t res_blocks, res_lines;
>  	uint32_t selected_result;
>  	uint8_t bytes_per_pixel;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
> +	struct intel_plane_state *intel_pstate = to_intel_plane_state(plane->state);
> +	uint32_t width = 0, height = 0;
>  
>  	if (latency == 0 || !cstate->base.active || !fb)
>  		return false;
>  
> +	if (drm_rect_width(&intel_pstate->src)) {
> +		width = drm_rect_width(&intel_pstate->src) >> 16;
> +		height = drm_rect_height(&intel_pstate->src) >> 16;
> +	} else {
> +		width = intel_crtc->config->pipe_src_w;
> +		height = intel_crtc->config->pipe_src_h;
> +	}

We're already bailing above this on !fb; shouldn't we do the same on a
plane that has a valid fb but is disabled due to being fully clipped
(which I think is the only thing that will trigger the else block here)?


Matt

> +
> +	if (intel_rotation_90_or_270(plane->state->rotation))
> +		swap(width, height);
> +
> +	/* for planar format */
>  	bytes_per_pixel = (fb->pixel_format == DRM_FORMAT_NV12) ?
>  				drm_format_plane_cpp(fb->pixel_format, 1) :
>  				drm_format_plane_cpp(fb->pixel_format, 0);
> @@ -3193,12 +3217,12 @@ static bool skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
>  				 latency);
>  	method2 = skl_wm_method2(skl_pipe_pixel_rate(cstate),
>  				 cstate->base.adjusted_mode.crtc_htotal,
> -				 cstate->pipe_src_w,
> +				 width,
>  				 bytes_per_pixel,
>  				 fb->modifier[0],
>  				 latency);
>  
> -	plane_bytes_per_line = cstate->pipe_src_w * bytes_per_pixel;
> +	plane_bytes_per_line = width * bytes_per_pixel;
>  	plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
>  
>  	if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
> -- 
> 2.4.3
> 

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795