[Intel-gfx] [PATCH i-g-t 4/5] tests/i915/i915_pm_dc: Added test for DC5 during DPMS

Anshuman Gupta anshuman.gupta at intel.com
Mon Mar 18 12:27:56 UTC 2019


From: Jyoti Yadav <jyoti.r.yadav at intel.com>

Added new subtest for DC5 entry during DPMS on/off cycle.
During DPMS on/off cycle DC5 counter is incremented.

v2: Rename the subtest with meaningful name.
v3: Rebased.
v4: Addressed review comments by removing leftover code
    cleanup().
v5: Addressed the review comment by removing redundant
    read_dc_counter() suggested by Imre.
    Listing actual change in patch set changelog to make review easier.
v6: Three way patch applied, no functional change.
v7: Disabling runtime suspend for the platfrom which support, DC9.
    rebased due to test name pm_dc changed to i915_pm_dc, aligning to
    other PM tests.
v8: Introduced setup_dc_dpms() in order to disable runtime pm, restoring
    POWER_DIR values to its original and enabling runtime pm  for other
    followed sub-tests.

Signed-off-by: Jyoti Yadav <jyoti.r.yadav at intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
---
 tests/i915/i915_pm_dc.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/tests/i915/i915_pm_dc.c b/tests/i915/i915_pm_dc.c
index 66e3e8f..1b14262 100644
--- a/tests/i915/i915_pm_dc.c
+++ b/tests/i915/i915_pm_dc.c
@@ -46,6 +46,7 @@ typedef struct {
 	enum psr_mode op_psr_mode;
 	drmModeModeInfo *mode;
 	igt_output_t *output;
+	bool runtime_suspend_disabled;
 } data_t;
 
 bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count);
@@ -172,6 +173,52 @@ static void test_dc_state_psr(data_t *data, int dc_flag)
 	cleanup(data);
 }
 
+static void setup_dc_dpms(data_t *data)
+{
+	if (IS_BROXTON(data->devid) || IS_GEMINILAKE(data->devid) || IS_ICELAKE(data->devid)) {
+		data->runtime_suspend_disabled = igt_disable_runtime_pm();
+		igt_require_f(data->runtime_suspend_disabled,
+			      "unable to disable runtime pm for i915\n");
+	} else {
+		data->runtime_suspend_disabled = false;
+	}
+}
+
+static void dpms_off_on(data_t *data)
+{
+	for (int i = 0; i < data->display.n_outputs; i++) {
+		kmstest_set_connector_dpms(data->drm_fd, data->display.outputs[i].config.connector,
+					   DRM_MODE_DPMS_OFF);
+	}
+
+	if (!data->runtime_suspend_disabled)
+		igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_SUSPENDED));
+
+	for (int i = 0; i < data->display.n_outputs; i++) {
+		kmstest_set_connector_dpms(data->drm_fd, data->display.outputs[i].config.connector,
+				   DRM_MODE_DPMS_ON);
+	}
+
+	if (!data->runtime_suspend_disabled)
+		igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_ACTIVE));
+}
+
+static void test_dc_state_dpms(data_t *data, int dc_flag)
+{
+	uint32_t dc_counter;
+
+	dc_counter = read_dc_counter(data->drm_fd, dc_flag);
+	dpms_off_on(data);
+	check_dc_counter(data->drm_fd, dc_flag, dc_counter);
+
+	/* if runtime PM is disabled for i915 restore it,
+	 * so any other sub-test can use runtime-PM. */
+	if (data->runtime_suspend_disabled) {
+		igt_restore_runtime_pm();
+		igt_setup_runtime_pm();
+	}
+}
+
 int main(int argc, char *argv[])
 {
 	bool has_runtime_pm;
@@ -208,6 +255,11 @@ int main(int argc, char *argv[])
 		test_dc_state_psr(&data, CHECK_DC6);
 	}
 
+	igt_subtest("dc5-dpms") {
+		setup_dc_dpms(&data);
+		test_dc_state_dpms(&data, CHECK_DC5);
+	}
+
 	igt_fixture {
 		close(data.debugfs_fd);
 		display_fini(&data);
-- 
2.7.4



More information about the Intel-gfx mailing list