[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27-6-generic (buildd@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu9) ) #1 SMP Tue Oct 7 04:15:23 UTC 2008 (Ubuntu 2.6.27-6.9-generic)
[    0.000000] Command line: root=UUID=0ceb2ba0-df2e-4da2-a28c-3be483363631 ro quiet splash  crashkernel=384M-2G:64M@16M,2G-:128M@16M
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bdcb0000 (usable)
[    0.000000]  BIOS-e820: 00000000bdcb0000 - 00000000bdce3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bdce3000 - 00000000bdcf0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bdcf0000 - 00000000bdd00000 (reserved)
[    0.000000]  BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[    0.000000] last_pfn = 0x240000 max_arch_pfn = 0x3ffffffff
[    0.000000] last_pfn = 0xbdcb0 max_arch_pfn = 0x3ffffffff
[    0.000000] init_memory_mapping
[    0.000000]  0000000000 - 00bdc00000 page 2M
[    0.000000]  00bdc00000 - 00bdcb0000 page 4k
[    0.000000] kernel direct mapping tables up to bdcb0000 @ 8000-d000
[    0.000000] last_map_addr: bdcb0000 end: bdcb0000
[    0.000000] init_memory_mapping
[    0.000000]  0100000000 - 0240000000 page 2M
[    0.000000] kernel direct mapping tables up to 240000000 @ b000-15000
[    0.000000] last_map_addr: 240000000 end: 240000000
[    0.000000] RAMDISK: 37763000 - 37fefffa
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP 000F7490, 0014 (r0 GBT   )
[    0.000000] ACPI: RSDT BDCE3040, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: FACP BDCE30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: DSDT BDCE3180, 47ED (r1 GBT    GBTUACPI     1000 MSFT  100000C)
[    0.000000] ACPI: FACS BDCB0000, 0040
[    0.000000] ACPI: HPET BDCE7AC0, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
[    0.000000] ACPI: MCFG BDCE7B40, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: APIC BDCE79C0, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: SSDT BDCE8520, 03AB (r1  PmRef    CpuPm     3000 INTL 20040311)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000240000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000240000000
[    0.000000]   NODE_DATA [0000000000001000 - 0000000000005fff]
[    0.000000]   bootmap [0000000000010000 -  0000000000057fff] pages 48
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 0240000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 00008baf9c]    TEXT DATA BSS ==> [0000200000 - 00008baf9c]
[    0.000000]   #3 [0037763000 - 0037fefffa]          RAMDISK ==> [0037763000 - 0037fefffa]
[    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #5 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
[    0.000000]   #6 [000000b000 - 0000010000]          PGTABLE ==> [000000b000 - 0000010000]
[    0.000000] found SMP MP-table at [ffff8800000f5660] 000f5660
[    0.000000]  [ffffe20000000000-ffffe20008ffffff] PMD -> [ffff880028200000-ffff8800301fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00240000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bdcb0
[    0.000000]     0: 0x00100000 -> 0x00240000
[    0.000000] On node 0 totalpages: 2088015
[    0.000000]   DMA zone: 2104 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 756976 pages, LIFO batch:31
[    0.000000]   Normal zone: 1290240 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bdcb0000 - 00000000bdce3000
[    0.000000] PM: Registered nosave memory: 00000000bdce3000 - 00000000bdcf0000
[    0.000000] PM: Registered nosave memory: 00000000bdcf0000 - 00000000bdd00000
[    0.000000] PM: Registered nosave memory: 00000000bdd00000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] PERCPU: Allocating 64928 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2049320
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=UUID=0ceb2ba0-df2e-4da2-a28c-3be483363631 ro quiet splash  crashkernel=384M-2G:64M@16M,2G-:128M@16M
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
[    0.000000] TSC: using PIT calibration value
[    0.000000] Detected 2832.982 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Checking aperture...
[    0.004000] No AGP bridge found
[    0.004000] Calgary: detecting Calgary via BIOS EBDA area
[    0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.004000] Placing software IO TLB between 0x20000000 - 0x24000000
[    0.004000] Memory: 8138788k/9437184k available (3118k kernel code, 213272k reserved, 1574k data, 536k init)
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5665.96 BogoMIPS (lpj=11331928)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] AppArmor: AppArmor initialized
[    0.004000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.004363] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.005897] Mount-cache hash table entries: 256
[    0.006052] Initializing cgroup subsys ns
[    0.006055] Initializing cgroup subsys cpuacct
[    0.006058] Initializing cgroup subsys memory
[    0.006072] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.006074] CPU: L2 cache: 6144K
[    0.006076] CPU 0/0 -> Node 0
[    0.006078] CPU: Physical Processor ID: 0
[    0.006079] CPU: Processor Core ID: 0
[    0.006085] CPU0: Thermal monitoring enabled (TM2)
[    0.006087] using mwait in idle threads.
[    0.007810] ACPI: Core revision 20080609
[    0.009366] ACPI: Checking initramfs for custom DSDT
[    0.290718] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.330414] CPU0: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07
[    0.330417] Using local APIC timer interrupts.
[    0.332021] APIC timer calibration result 20830801
[    0.332023] Detected 20.830 MHz APIC timer.
[    0.332120] Booting processor 1/3 ip 6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 5666.08 BogoMIPS (lpj=11332161)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 6144K
[    0.004000] CPU 1/3 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 3
[    0.004000] CPU1: Thermal monitoring enabled (TM2)
[    0.420858] CPU1: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07
[    0.420875] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.424099] Booting processor 2/2 ip 6000
[    0.004000] Initializing CPU#2
[    0.004000] Calibrating delay using timer specific routine.. 5666.07 BogoMIPS (lpj=11332148)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 6144K
[    0.004000] CPU 2/2 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 2
[    0.004000] CPU2: Thermal monitoring enabled (TM2)
[    0.512807] CPU2: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07
[    0.512824] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.516113] Booting processor 3/1 ip 6000
[    0.004000] Initializing CPU#3
[    0.004000] Calibrating delay using timer specific routine.. 5666.03 BogoMIPS (lpj=11332066)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 6144K
[    0.004000] CPU 3/1 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] CPU3: Thermal monitoring enabled (TM2)
[    0.604868] CPU3: Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz stepping 07
[    0.604885] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.608073] Brought up 4 CPUs
[    0.608075] Total of 4 processors activated (22664.15 BogoMIPS).
[    0.608119] CPU0 attaching sched-domain:
[    0.608121]  domain 0: span 0,3 level MC
[    0.608123]   groups: 0 3
[    0.608126]   domain 1: span 0-3 level CPU
[    0.608127]    groups: 0,3 1-2
[    0.608130]    domain 2: span 0-3 level NODE
[    0.608132]     groups: 0-3
[    0.608136] CPU1 attaching sched-domain:
[    0.608137]  domain 0: span 1-2 level MC
[    0.608139]   groups: 1 2
[    0.608141]   domain 1: span 0-3 level CPU
[    0.608143]    groups: 1-2 0,3
[    0.608145]    domain 2: span 0-3 level NODE
[    0.608147]     groups: 0-3
[    0.608150] CPU2 attaching sched-domain:
[    0.608151]  domain 0: span 1-2 level MC
[    0.608153]   groups: 2 1
[    0.608155]   domain 1: span 0-3 level CPU
[    0.608157]    groups: 1-2 0,3
[    0.608159]    domain 2: span 0-3 level NODE
[    0.608161]     groups: 0-3
[    0.608164] CPU3 attaching sched-domain:
[    0.608165]  domain 0: span 0,3 level MC
[    0.608167]   groups: 3 0
[    0.608169]   domain 1: span 0-3 level CPU
[    0.608171]    groups: 0,3 1-2
[    0.608173]    domain 2: span 0-3 level NODE
[    0.608175]     groups: 0-3
[    0.608303] net_namespace: 1552 bytes
[    0.608303] Booting paravirtualized kernel on bare hardware
[    0.608303] Time: 15:31:37  Date: 10/10/08
[    0.608303] NET: Registered protocol family 16
[    0.608303] ACPI: bus type pci registered
[    0.608303] PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
[    0.608303] PCI: MCFG area at c0000000 reserved in E820
[    0.624157] PCI: Using MMCONFIG at c0000000 - cfffffff
[    0.624161] PCI: Using configuration type 1 for base access
[    0.625241] ACPI: EC: Look up EC in DSDT
[    0.639794] ACPI: Interpreter enabled
[    0.639804] ACPI: (supports S0 S3 S4 S5)
[    0.639830] ACPI: Using IOAPIC for interrupt routing
[    0.648572] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.648572] PCI: 0000:00:02.0 reg 10 64bit mmio: [e1000000, e13fffff]
[    0.648572] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
[    0.648572] PCI: 0000:00:02.0 reg 20 io port: [e200, e207]
[    0.648572] PCI: 0000:00:02.1 reg 10 64bit mmio: [e1400000, e14fffff]
[    0.648572] PCI: 0000:00:1a.0 reg 20 io port: [e600, e61f]
[    0.648572] PCI: 0000:00:1a.1 reg 20 io port: [e000, e01f]
[    0.648572] PCI: 0000:00:1a.2 reg 20 io port: [e100, e11f]
[    0.648572] PCI: 0000:00:1a.7 reg 10 32bit mmio: [e1604000, e16043ff]
[    0.648572] PCI: 0000:00:1b.0 reg 10 64bit mmio: [e1600000, e1603fff]
[    0.652106] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.652112] pci 0000:00:1b.0: PME# disabled
[    0.652157] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.652162] pci 0000:00:1c.0: PME# disabled
[    0.652211] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.652216] pci 0000:00:1c.5: PME# disabled
[    0.652258] PCI: 0000:00:1d.0 reg 20 io port: [e300, e31f]
[    0.652316] PCI: 0000:00:1d.1 reg 20 io port: [e400, e41f]
[    0.652375] PCI: 0000:00:1d.2 reg 20 io port: [e500, e51f]
[    0.652424] PCI: 0000:00:1d.7 reg 10 32bit mmio: [e1605000, e16053ff]
[    0.652594] PCI: 0000:00:1f.2 reg 10 io port: [0, 7]
[    0.652600] PCI: 0000:00:1f.2 reg 14 io port: [0, 3]
[    0.652607] PCI: 0000:00:1f.2 reg 18 io port: [0, 7]
[    0.652613] PCI: 0000:00:1f.2 reg 1c io port: [0, 3]
[    0.652619] PCI: 0000:00:1f.2 reg 20 io port: [f000, f00f]
[    0.652625] PCI: 0000:00:1f.2 reg 24 io port: [f100, f10f]
[    0.652659] PCI: 0000:00:1f.3 reg 10 64bit mmio: [e1606000, e16060ff]
[    0.652673] PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
[    0.652713] PCI: 0000:00:1f.5 reg 10 io port: [e800, e807]
[    0.652720] PCI: 0000:00:1f.5 reg 14 io port: [e900, e903]
[    0.652726] PCI: 0000:00:1f.5 reg 18 io port: [ea00, ea07]
[    0.652732] PCI: 0000:00:1f.5 reg 1c io port: [eb00, eb03]
[    0.652739] PCI: 0000:00:1f.5 reg 20 io port: [ec00, ec0f]
[    0.652745] PCI: 0000:00:1f.5 reg 24 io port: [ed00, ed0f]
[    0.652851] PCI: 0000:02:00.0 reg 10 io port: [c000, c0ff]
[    0.652865] PCI: 0000:02:00.0 reg 18 32bit mmio: [e1510000, e1510fff]
[    0.652887] PCI: 0000:02:00.0 reg 20 32bit mmio: [e1500000, e150ffff]
[    0.652902] PCI: 0000:02:00.0 reg 30 32bit mmio: [0, ffff]
[    0.652940] pci 0000:02:00.0: supports D1
[    0.652942] pci 0000:02:00.0: supports D2
[    0.652945] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.652951] pci 0000:02:00.0: PME# disabled
[    0.652985] PCI: bridge 0000:00:1c.5 io port: [c000, cfff]
[    0.652990] PCI: bridge 0000:00:1c.5 32bit mmio: [e0000000, e0ffffff]
[    0.652997] PCI: bridge 0000:00:1c.5 64bit mmio pref: [e1500000, e15fffff]
[    0.653035] PCI: 0000:03:05.0 reg 10 io port: [d000, d007]
[    0.653043] PCI: 0000:03:05.0 reg 14 io port: [d100, d103]
[    0.653050] PCI: 0000:03:05.0 reg 18 io port: [d200, d207]
[    0.653057] PCI: 0000:03:05.0 reg 1c io port: [d300, d303]
[    0.653065] PCI: 0000:03:05.0 reg 20 io port: [d400, d40f]
[    0.653122] pci 0000:00:1e.0: transparent bridge
[    0.653127] PCI: bridge 0000:00:1e.0 io port: [d000, dfff]
[    0.653153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.653762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.653981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.654191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.693854] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.693854] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.693854] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.693854] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.693854] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.693854] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.696148] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.696412] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[    0.696521] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.696521] pnp: PnP ACPI init
[    0.696521] ACPI: bus type pnp registered
[    0.701014] pnp: PnP ACPI: found 12 devices
[    0.701014] ACPI: ACPI bus type pnp unregistered
[    0.701014] PCI: Using ACPI for IRQ routing
[    0.720045] NET: Registered protocol family 8
[    0.720049] NET: Registered protocol family 20
[    0.720074] NetLabel: Initializing
[    0.720074] NetLabel:  domain hash size = 128
[    0.720074] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.720077] NetLabel:  unlabeled traffic allowed by default
[    0.720118] PCI-GART: No AMD northbridge found.
[    0.720130] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.720137] hpet0: 4 64-bit timers, 14318180 Hz
[    0.724042] Switched to high resolution mode on CPU 0
[    0.724887] Switched to high resolution mode on CPU 2
[    0.724910] Switched to high resolution mode on CPU 3
[    0.724939] Switched to high resolution mode on CPU 1
[    0.726063] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[    0.726067]    actual entries 65586
[    0.726162] AppArmor: AppArmor Filesystem Enabled
[    0.726183] ACPI: RTC can wake from S4
[    0.744032] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.744039] system 00:01: ioport range 0x290-0x29f has been reserved
[    0.744045] system 00:01: ioport range 0x800-0x805 has been reserved
[    0.744051] system 00:01: ioport range 0x290-0x294 has been reserved
[    0.744056] system 00:01: ioport range 0x880-0x88f has been reserved
[    0.744074] system 00:08: ioport range 0x400-0x4bf has been reserved
[    0.744086] system 00:09: iomem range 0xc0000000-0xcfffffff could not be reserved
[    0.744098] system 00:0a: iomem range 0xcc400-0xcffff has been reserved
[    0.744105] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
[    0.744111] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[    0.744117] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[    0.744124] system 00:0a: iomem range 0xbdcb0000-0xbdcfffff could not be reserved
[    0.744130] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[    0.744136] system 00:0a: iomem range 0x100000-0xbdcaffff could not be reserved
[    0.744143] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.744150] system 00:0a: iomem range 0xfed10000-0xfed1dfff could not be reserved
[    0.744156] system 00:0a: iomem range 0xfed20000-0xfed8ffff could not be reserved
[    0.744168] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.744172] system 00:0a: iomem range 0xffb00000-0xffb7ffff could not be reserved
[    0.744177] system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
[    0.744182] system 00:0a: iomem range 0xe0000-0xeffff has been reserved
[    0.749918] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.749922] pci 0000:00:1c.0:   IO window: disabled
[    0.749927] pci 0000:00:1c.0:   MEM window: disabled
[    0.749932] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.749941] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[    0.749945] pci 0000:00:1c.5:   IO window: 0xc000-0xcfff
[    0.749951] pci 0000:00:1c.5:   MEM window: 0xe0000000-0xe0ffffff
[    0.749956] pci 0000:00:1c.5:   PREFETCH window: 0x000000e1500000-0x000000e15fffff
[    0.749964] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.749968] pci 0000:00:1e.0:   IO window: 0xd000-0xdfff
[    0.749973] pci 0000:00:1e.0:   MEM window: disabled
[    0.749978] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.749994] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.750000] pci 0000:00:1c.0: setting latency timer to 64
[    0.750010] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.750016] pci 0000:00:1c.5: setting latency timer to 64
[    0.750023] pci 0000:00:1e.0: setting latency timer to 64
[    0.750028] bus: 00 index 0 io port: [0, ffff]
[    0.750031] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[    0.750034] bus: 01 index 0 mmio: [0, 0]
[    0.750036] bus: 01 index 1 mmio: [0, 0]
[    0.750038] bus: 01 index 2 mmio: [0, 0]
[    0.750041] bus: 01 index 3 mmio: [0, 0]
[    0.750043] bus: 02 index 0 io port: [c000, cfff]
[    0.750046] bus: 02 index 1 mmio: [e0000000, e0ffffff]
[    0.750049] bus: 02 index 2 mmio: [e1500000, e15fffff]
[    0.750052] bus: 02 index 3 mmio: [0, 0]
[    0.750054] bus: 03 index 0 io port: [d000, dfff]
[    0.750057] bus: 03 index 1 mmio: [0, 0]
[    0.750059] bus: 03 index 2 mmio: [0, 0]
[    0.750062] bus: 03 index 3 io port: [0, ffff]
[    0.750064] bus: 03 index 4 mmio: [0, ffffffffffffffff]
[    0.750076] NET: Registered protocol family 2
[    0.788519] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.790525] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.793133] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.793514] TCP: Hash tables configured (established 524288 bind 65536)
[    0.793519] TCP reno registered
[    0.804159] NET: Registered protocol family 1
[    0.804296] checking if image is initramfs... it is
[    1.391050] Freeing initrd memory: 8755k freed
[    1.395985] audit: initializing netlink socket (disabled)
[    1.396019] type=2000 audit(1223652697.396:1): initialized
[    1.400982] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.405968] VFS: Disk quotas dquot_6.5.1
[    1.406090] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.406233] msgmni has been set to 15913
[    1.406397] io scheduler noop registered
[    1.406400] io scheduler anticipatory registered
[    1.406404] io scheduler deadline registered
[    1.406592] io scheduler cfq registered (default)
[    1.406606] pci 0000:00:02.0: Boot video device
[    1.406902] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.406936] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.406973] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.407042] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.407109] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.407222] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    1.407254] pcieport-driver 0000:00:1c.5: found MSI capability
[    1.407286] pci_express 0000:00:1c.5:pcie00: allocate port service
[    1.407366] pci_express 0000:00:1c.5:pcie02: allocate port service
[    1.407433] pci_express 0000:00:1c.5:pcie03: allocate port service
[    1.459245] hpet_resources: 0xfed00000 is busy
[    1.459369] Linux agpgart interface v0.103
[    1.459374] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.463119] brd: module loaded
[    1.463245] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.463618] PNP: No PS/2 controller found. Probing ports directly.
[    1.464085] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.464094] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.485802] mice: PS/2 mouse device common for all mice
[    1.486045] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.486071] rtc0: alarms up to one month, hpet irqs
[    1.486160] cpuidle: using governor ladder
[    1.486164] cpuidle: using governor menu
[    1.486887] registered taskstats version 1
[    1.487040]   Magic number: 12:842:537
[    1.487044] bdi 1:15: hash matches
[    1.487116] rtc_cmos 00:04: setting system clock to 2008-10-10 15:31:38 UTC (1223652698)
[    1.487124] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.487127] EDD information not available.
[    1.487185] Freeing unused kernel memory: 536k freed
[    1.487352] Write protecting the kernel read-only data: 1252k
[    1.575313] fuse init (API version 7.9)
[    1.599574] uvesafb: failed to execute /sbin/v86d
[    1.599579] uvesafb: make sure that the v86d helper is installed and executable
[    1.599584] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    1.599589] uvesafb: vbe_init() failed with -22
[    1.599596] uvesafb: probe of uvesafb.0 failed with error -22
[    1.644126] ACPI: SSDT BDCE7C40, 022A (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
[    1.644410] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    1.644466] processor ACPI0007:00: registered as cooling_device0
[    1.644469] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.644665] ACPI: SSDT BDCE8100, 0152 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
[    1.644888] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    1.644926] processor ACPI0007:01: registered as cooling_device1
[    1.644929] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.645080] ACPI: SSDT BDCE8260, 0152 (r1  PmRef  Cpu2Ist     3000 INTL 20040311)
[    1.645285] ACPI: CPU2 (power states: C1[C1] C2[C2])
[    1.645318] processor ACPI0007:02: registered as cooling_device2
[    1.645321] ACPI: Processor [CPU2] (supports 8 throttling states)
[    1.645470] ACPI: SSDT BDCE83C0, 0152 (r1  PmRef  Cpu3Ist     3000 INTL 20040311)
[    1.645735] ACPI: CPU3 (power states: C1[C1] C2[C2])
[    1.645795] processor ACPI0007:03: registered as cooling_device3
[    1.645799] ACPI: Processor [CPU3] (supports 8 throttling states)
[    1.720943] usbcore: registered new interface driver usbfs
[    1.720960] usbcore: registered new interface driver hub
[    1.721121] usbcore: registered new device driver usb
[    1.722334] USB Universal Host Controller Interface driver v3.0
[    1.722371] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.722380] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.722384] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.722417] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.722458] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e600
[    1.722580] usb usb1: configuration #1 chosen from 1 choice
[    1.722600] hub 1-0:1.0: USB hub found
[    1.722605] hub 1-0:1.0: 2 ports detected
[    1.784286] No dock devices found.
[    1.791747] SCSI subsystem initialized
[    1.800513] libata version 3.00 loaded.
[    1.825912] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.825920] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    1.825922] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.825939] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    1.825966] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000
[    1.826029] usb usb2: configuration #1 chosen from 1 choice
[    1.826048] hub 2-0:1.0: USB hub found
[    1.826053] hub 2-0:1.0: 2 ports detected
[    1.929863] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.929870] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    1.929872] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.929890] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[    1.929917] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100
[    1.929981] usb usb3: configuration #1 chosen from 1 choice
[    1.929999] hub 3-0:1.0: USB hub found
[    1.930004] hub 3-0:1.0: 2 ports detected
[    2.137034] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.137045] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    2.137048] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    2.137080] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[    2.140992] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    2.141005] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe1604000
[    2.248015] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    2.261011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.261120] usb usb4: configuration #1 chosen from 1 choice
[    2.261145] hub 4-0:1.0: USB hub found
[    2.261153] hub 4-0:1.0: 6 ports detected
[    2.317040] hub 3-0:1.0: unable to enumerate USB device on port 1
[    2.468142] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.468151] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.468154] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.468188] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    2.468215] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[    2.468284] usb usb5: configuration #1 chosen from 1 choice
[    2.468302] hub 5-0:1.0: USB hub found
[    2.468308] hub 5-0:1.0: 2 ports detected
[    2.572793] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.572797] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.572799] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.572816] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    2.572839] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[    2.572898] usb usb6: configuration #1 chosen from 1 choice
[    2.572914] hub 6-0:1.0: USB hub found
[    2.572919] hub 6-0:1.0: 2 ports detected
[    2.676785] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.676789] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.676791] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.676810] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    2.676828] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[    2.676882] usb usb7: configuration #1 chosen from 1 choice
[    2.676901] hub 7-0:1.0: USB hub found
[    2.676905] hub 7-0:1.0: 2 ports detected
[    2.781033] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.781039] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.781041] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.781425] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    2.785332] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.785336] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1605000
[    2.876011] usb 3-1: new low speed USB device using uhci_hcd and address 3
[    2.888012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    2.888456] usb usb8: configuration #1 chosen from 1 choice
[    2.888821] hub 8-0:1.0: USB hub found
[    2.888825] hub 8-0:1.0: 6 ports detected
[    2.993553] pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.993582] pata_acpi 0000:00:1f.2: setting latency timer to 64
[    2.993596] pata_acpi 0000:00:1f.2: PCI INT B disabled
[    2.994123] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.994135] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.994149] r8169 0000:02:00.0: setting latency timer to 64
[    2.994157] pata_acpi 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.994179] pata_acpi 0000:00:1f.5: setting latency timer to 64
[    2.994190] pata_acpi 0000:00:1f.5: PCI INT B disabled
[    2.994381] eth0: RTL8168c/8111c at 0xffffc20000c38000, 00:1f:d0:29:18:36, XID 3c4000c0 IRQ 2301
[    2.996092] pata_it8213 0000:03:05.0: version 0.0.3
[    2.996101] pata_it8213 0000:03:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    2.996121] pata_it8213 0000:03:05.0: setting latency timer to 64
[    2.996161] scsi0 : pata_it8213
[    2.996609] scsi1 : pata_it8213
[    2.996636] ata1: PATA max UDMA/66 cmd 0xd000 ctl 0xd100 bmdma 0xd400 irq 21
[    2.996638] ata2: DUMMY
[    3.071052] usb 3-1: configuration #1 chosen from 1 choice
[    3.163071] ata_piix 0000:00:1f.2: version 2.12
[    3.163080] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.163083] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    3.163114] ata_piix 0000:00:1f.2: setting latency timer to 64
[    3.163640] scsi2 : ata_piix
[    3.163701] scsi3 : ata_piix
[    3.164256] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    3.164260] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    3.313512] usb 3-2: new full speed USB device using uhci_hcd and address 4
[    3.486407] usb 3-2: configuration #1 chosen from 1 choice
[    3.491997] hub 3-2:1.0: USB hub found
[    3.492969] hub 3-2:1.0: 3 ports detected
[    3.636066] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.652417] ata3.00: HPA detected: current 586070255, native 586072368
[    3.652425] ata3.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133
[    3.652427] ata3.00: 586070255 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.652678] ata3.01: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133
[    3.652681] ata3.01: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.668422] ata3.00: configured for UDMA/133
[    3.684602] ata3.01: configured for UDMA/133
[    3.781977] usb 3-2.3: new full speed USB device using uhci_hcd and address 5
[    3.918019] usb 3-2.3: configuration #1 chosen from 1 choice
[    3.921188] usbcore: registered new interface driver hiddev
[    3.936239] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.2/usb3/3-1/3-1:1.0/input/input1
[    3.953069] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.2-1
[    3.956215] input: Razer Reclusa Keyboard as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2.3/3-2.3:1.0/input/input2
[    3.965046] input,hidraw1: USB HID v1.10 Keyboard [Razer Reclusa Keyboard] on usb-0000:00:1a.2-2.3
[    3.969093] input: Razer Reclusa Keyboard as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2.3/3-2.3:1.1/input/input3
[    4.000046] input,hidraw2: USB HID v1.10 Device [Razer Reclusa Keyboard] on usb-0000:00:1a.2-2.3
[    4.000063] usbcore: registered new interface driver usbhid
[    4.000065] usbhid: v2.6:USB HID core driver
[    4.160061] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.176183] ata4.01: ATAPI: HL-DT-ST BD-RE  GGW-H20L, YL02, max UDMA/133
[    4.192185] ata4.01: configured for UDMA/133
[    4.192319] scsi 2:0:0:0: Direct-Access     ATA      WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5
[    4.192402] scsi 2:0:0:0: Attached scsi generic sg0 type 0
[    4.192456] scsi 2:0:1:0: Direct-Access     ATA      WDC WD3000GLFS-0 03.0 PQ: 0 ANSI: 5
[    4.192513] scsi 2:0:1:0: Attached scsi generic sg1 type 0
[    4.196271] scsi 3:0:1:0: CD-ROM            HL-DT-ST BD-RE  GGW-H20L  YL02 PQ: 0 ANSI: 5
[    4.196379] scsi 3:0:1:0: Attached scsi generic sg2 type 5
[    4.196405] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    4.196408] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    4.196445] ata_piix 0000:00:1f.5: setting latency timer to 64
[    4.196666] scsi4 : ata_piix
[    4.196748] scsi5 : ata_piix
[    4.197155] ata5: SATA max UDMA/133 cmd 0xe800 ctl 0xe900 bmdma 0xec00 irq 19
[    4.197158] ata6: SATA max UDMA/133 cmd 0xea00 ctl 0xeb00 bmdma 0xec08 irq 19
[    4.528056] ata5: SATA link down (SStatus 0 SControl 300)
[    4.858545] ata6: SATA link down (SStatus 0 SControl 300)
[    4.870734] Driver 'sd' needs updating - please use bus_type methods
[    4.870807] sd 2:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
[    4.870820] sd 2:0:0:0: [sda] Write Protect is off
[    4.870821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.870840] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.870901] sd 2:0:0:0: [sda] 586070255 512-byte hardware sectors (300068 MB)
[    4.870911] sd 2:0:0:0: [sda] Write Protect is off
[    4.870913] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.870931] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.870934]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    4.880645]  sda1 sda2 < sda5 >
[    4.888762] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.890330] sd 2:0:1:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[    4.890342] sd 2:0:1:0: [sdb] Write Protect is off
[    4.890344] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    4.890364] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.890406] sd 2:0:1:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[    4.890417] sd 2:0:1:0: [sdb] Write Protect is off
[    4.890419] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    4.890438] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.890441]  sdb: unknown partition table
[    4.897077] sd 2:0:1:0: [sdb] Attached SCSI disk
[    5.119637] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.119642] Uniform CD-ROM driver Revision: 3.20
[    5.119725] sr 3:0:1:0: Attached scsi CD-ROM sr0
[    6.481831] PM: Starting manual resume from disk
[    6.481833] PM: Resume from partition 8:5
[    6.481834] PM: Checking hibernation image.
[    6.481941] PM: Resume from disk failed.
[    6.513186] kjournald starting.  Commit interval 5 seconds
[    6.513217] EXT3-fs: mounted filesystem with ordered data mode.
[   12.072520] udevd version 124 started
[   12.249109] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.275040] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.286512] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   12.312027] ACPI: Power Button (FF) [PWRF]
[   12.312075] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[   12.328944] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
[   12.330242] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[   12.341941] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   12.348028] ACPI: Power Button (CM) [PWRB]
[   12.562712] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   12.586706] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   12.586730] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.622071] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[   14.060608] lp: driver loaded but no devices found
[   14.135602] Adding 11912156k swap on /dev/sda5.  Priority:-1 extents:1 across:11912156k
[   14.673950] EXT3 FS on sda1, internal journal
[   15.449185] type=1505 audit(1223652712.479:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4434
[   15.541647] type=1505 audit(1223652712.573:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4439
[   15.541778] type=1505 audit(1223652712.573:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4439
[   15.639414] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.237361] ACPI: WMI: Mapper loaded
[   18.194540] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   18.412490] NET: Registered protocol family 10
[   18.412803] lo: Disabled Privacy Extensions
[   18.555562] ppdev: user-space parallel port driver
[   19.907397] Bluetooth: Core ver 2.13
[   19.907759] NET: Registered protocol family 31
[   19.907761] Bluetooth: HCI device and connection manager initialized
[   19.907767] Bluetooth: HCI socket layer initialized
[   19.931761] Bluetooth: L2CAP ver 2.11
[   19.931765] Bluetooth: L2CAP socket layer initialized
[   19.960445] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.960450] Bluetooth: BNEP filters: protocol multicast
[   19.980139] Bridge firewalling registered
[   19.980271] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   20.008942] Bluetooth: SCO (Voice Link) ver 0.6
[   20.008947] Bluetooth: SCO socket layer initialized
[   20.189120] Bluetooth: RFCOMM socket layer initialized
[   20.189549] Bluetooth: RFCOMM TTY layer initialized
[   20.189553] Bluetooth: RFCOMM ver 1.10
[   22.465035] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[   24.285141] r8169: eth0: link up
[   24.285151] r8169: eth0: link up
[   24.427892] NET: Registered protocol family 17
[   34.332029] eth0: no IPv6 routers present
