Linux version 2.6.27-rc9-00033-gb34c873 (remi@atmos) (gcc version 4.3.2 (Gentoo 4.3.2 p1.0) ) #2 PREEMPT Sat Oct 11 11:58:44 CEST 2008
PAT WC disabled due to known CPU erratum.
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000004dee0000 (usable)
 BIOS-e820: 000000004dee0000 - 000000004deec000 (ACPI data)
 BIOS-e820: 000000004deec000 - 000000004df00000 (ACPI NVS)
 BIOS-e820: 000000004df00000 - 0000000050000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
last_pfn = 0x4dee0 max_arch_pfn = 0x100000
kernel direct mapping tables up to 38000000 @ 7000-c000
DMI present.
ACPI: RSDP 000F7E00, 0014 (r0 HP    )
ACPI: RSDT 4DEE76EE, 0040 (r1 HP     09B8      6040000  LTP        0)
ACPI: FACP 4DEEBE8C, 0074 (r1 HP     09B8      6040000 PTL        50)
ACPI: DSDT 4DEE7BCD, 42BF (r1 HP     09B8      6040000 MSFT  100000E)
ACPI: FACS 4DEFCFC0, 0040
ACPI: HPET 4DEEBF00, 0038 (r1 HP     09B8      6040000 PTL         0)
ACPI: APIC 4DEEBF38, 005A (r1 HP     09B8      6040000 PTL        50)
ACPI: APIC 4DEEBF92, 0046 (r1 HP     09B8      6040000 PTL         0)
ACPI: BOOT 4DEEBFD8, 0028 (r1 HP     09B8      6040000  LTP        1)
ACPI: SSDT 4DEE7B31, 009C (r1 HP     09B8            1 INTL 20030224)
ACPI: SSDT 4DEE772E, 0277 (r1 HP     09B8         2000 INTL 20030224)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
ACPI: DMI detected: Hewlett-Packard
350MB HIGHMEM available.
896MB LOWMEM available.
  mapped low ram: 0 - 38000000
  low ram: 00000000 - 38000000
  bootmap 00008000 - 0000f000
(6 early reservations) ==> bootmem [0000000000 - 0038000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000100000 - 00004e576c]    TEXT DATA BSS ==> [0000100000 - 00004e576c]
  #2 [00004e6000 - 00004e9000]    INIT_PG_TABLE ==> [00004e6000 - 00004e9000]
  #3 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
  #4 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #5 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00f7e30] 000f7e30
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x00038000
  HighMem  0x00038000 -> 0x0004dee0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0004dee0
On node 0 totalpages: 319103
free_area_init_node: node 0, pgdat c0432ff0, node_mem_map c1000000
  DMA zone: 3967 pages, LIFO batch:0
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 89122 pages, LIFO batch:15
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0x0 is invalid
Using ACPI (MADT) for SMP configuration information
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 316609
Kernel command line: root=/dev/sda7
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 1695.739 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1261056k/1276800k available (2367k kernel code, 14816k reserved, 944k data, 248k init, 359296k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffac000 - 0xfffff000   ( 332 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0440000 - 0xc047e000   ( 248 kB)
      .data : 0xc034feea - 0xc043c138   ( 944 kB)
      .text : 0xc0100000 - 0xc034feea   (2367 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.78 BogoMIPS (lpj=5652463)
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
net_namespace: 612 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9c2, last bus=2
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE storm detected, disabling EC GPE
ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:02.0 reg 10 32bit mmio: [e8000000, efffffff]
PCI: 0000:00:02.0 reg 14 32bit mmio: [e0000000, e007ffff]
PCI: 0000:00:02.0 reg 18 io port: [1800, 1807]
pci 0000:00:02.0: supports D1
PCI: 0000:00:02.1 reg 10 32bit mmio: [f0000000, f7ffffff]
PCI: 0000:00:02.1 reg 14 32bit mmio: [e0080000, e00fffff]
pci 0000:00:02.1: supports D1
PCI: 0000:00:1d.0 reg 20 io port: [1820, 183f]
PCI: 0000:00:1d.1 reg 20 io port: [1840, 185f]
PCI: 0000:00:1d.2 reg 20 io port: [1860, 187f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [e0100000, e01003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
PCI: 0000:00:1f.3 reg 20 io port: [1880, 189f]
PCI: 0000:00:1f.5 reg 10 io port: [1c00, 1cff]
PCI: 0000:00:1f.5 reg 14 io port: [18c0, 18ff]
PCI: 0000:00:1f.5 reg 18 32bit mmio: [e0100c00, e0100dff]
PCI: 0000:00:1f.5 reg 1c 32bit mmio: [e0100800, e01008ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
PCI: 0000:00:1f.6 reg 10 io port: [2400, 24ff]
PCI: 0000:00:1f.6 reg 14 io port: [2000, 207f]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: PME# disabled
PCI: 0000:02:00.0 reg 10 io port: [3000, 30ff]
PCI: 0000:02:00.0 reg 14 32bit mmio: [e0207800, e02078ff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: 0000:02:06.0 reg 10 32bit mmio: [e0206000, e0206fff]
pci 0000:02:06.0: PME# supported from D0 D3hot D3cold
pci 0000:02:06.0: PME# disabled
PCI: 0000:02:09.0 reg 10 32bit mmio: [0, fff]
pci 0000:02:09.0: supports D1
pci 0000:02:09.0: supports D2
pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:09.0: PME# disabled
PCI: 0000:02:09.2 reg 10 32bit mmio: [e0207000, e02077ff]
PCI: 0000:02:09.2 reg 14 32bit mmio: [e0200000, e0203fff]
pci 0000:02:09.2: supports D1
pci 0000:02:09.2: supports D2
pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:09.2: PME# disabled
PCI: 0000:02:09.3 reg 10 32bit mmio: [e0204000, e0205fff]
pci 0000:02:09.3: supports D1
pci 0000:02:09.3: supports D2
pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot
pci 0000:02:09.3: PME# disabled
PCI: 0000:02:09.4 reg 10 32bit mmio: [e0208400, e02084ff]
PCI: 0000:02:09.4 reg 14 32bit mmio: [e0208000, e02080ff]
PCI: 0000:02:09.4 reg 18 32bit mmio: [e0207c00, e0207cff]
pci 0000:02:09.4: supports D1
pci 0000:02:09.4: supports D2
pci 0000:02:09.4: PME# supported from D0 D1 D2 D3hot
pci 0000:02:09.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 io port: [3000, 3fff]
PCI: bridge 0000:00:1e.0 32bit mmio: [e0200000, e02fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs *4)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3)
ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *4)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 7 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
tracer: 772 pages allocated for 65536 entries of 48 bytes
   actual entries 65620
system 00:04: ioport range 0x600-0x60f has been reserved
system 00:04: ioport range 0x800-0x80f has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1180-0x11bf has been reserved
system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
pci 0000:02:09.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:09.0:   IO window: 0x003400-0x0034ff
pci 0000:02:09.0:   IO window: 0x003800-0x0038ff
pci 0000:02:09.0:   PREFETCH window: 0x60000000-0x63ffffff
pci 0000:02:09.0:   MEM window: 0x68000000-0x6bffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0:   IO window: 0x3000-0x3fff
pci 0000:00:1e.0:   MEM window: 0xe0200000-0xe02fffff
pci 0000:00:1e.0:   PREFETCH window: 0x00000060000000-0x00000063ffffff
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 02 index 0 io port: [3000, 3fff]
bus: 02 index 1 mmio: [e0200000, e02fffff]
bus: 02 index 2 mmio: [60000000, 63ffffff]
bus: 02 index 3 io port: [0, ffff]
bus: 02 index 4 mmio: [0, ffffffff]
bus: 03 index 0 io port: [3400, 34ff]
bus: 03 index 1 io port: [3800, 38ff]
bus: 03 index 2 mmio: [60000000, 63ffffff]
bus: 03 index 3 mmio: [68000000, 6bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x36 set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
fuse init (API version 7.9)
msgmni has been set to 1762
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
ACPI: AC Adapter [ACAD] (on-line)
Switched to high resolution mode on CPU 0
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (63 C)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 855GM Chipset
agpgart-intel 0000:00:00.0: detected 32636K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm:i915_driver_load] *ERROR* failed to enable MSI
[drm] Initialized i915 1.6.0 20080730 on minor 0
pci 0000:00:02.1: setting latency timer to 64
[drm:i915_driver_load] *ERROR* failed to enable MSI
[drm] Initialized i915 1.6.0 20080730 on minor 1
brd: module loaded
loop: module loaded
tifm_7xx1 0000:02:09.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
8139too Fast Ethernet driver 0.9.28
8139too 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
eth0: RealTek RTL8139 at 0xf882c800, 00:c0:9f:99:33:08, IRQ 16
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
tifm_core: MMC/SD card detected in socket 0:3
ata1.00: ATA-6: FUJITSU MHU2100AT, 00000008, max UDMA/100
ata1.00: 195371568 sectors, multi 16: LBA 
ata1.00: configured for UDMA/100
ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L532R, HA04, max MWDMA2
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHU2100A 0000 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L532R HA04 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
firewire_ohci 0000:02:09.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
firewire_ohci: Added fw-ohci device 0000:02:09.2, OHCI version 1.10
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
firewire_core: created device fw0: GUID 00c09f000052be16, S400
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
Initializing USB Mass Storage driver...
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to TSC halts in idle
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.17.
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50841 usecs
intel8x0: clocking to 48000
ALSA device list:
  #0: Intel 82801DB-ICH4 with unknown codec at irq 17
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
ReiserFS: sda7: found reiserfs format "3.6" with standard journal
ReiserFS: sda7: using ordered data mode
ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda7: checking transaction log (sda7)
ReiserFS: sda7: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 248k freed
Clocksource tsc unstable (delta = -275974880 ns)
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmr
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
firmware: requesting ipw2200-bss.fw
ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
ReiserFS: sda8: found reiserfs format "3.6" with standard journal
ReiserFS: sda8: using ordered data mode
ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda8: checking transaction log (sda8)
ReiserFS: sda8: Using r5 hash to sort names
eth0: link down
[drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
[drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_idle] *ERROR* hardware wedged
[drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck
[drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
[drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_idle] *ERROR* hardware wedged
[drm:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck
[drm:i915_gem_object_bind_to_gtt] *ERROR* GTT full, but LRU list empty
[drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_idle] *ERROR* hardware wedged
