Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.29-rc7-00031-gc86ab6c (steve@infinity) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #19 SMP PREEMPT Fri Mar 6 03:51:00 GMT 2009
Command line: real_root=/dev/sda4 root=/dev/sda4 pcie_aspm=force usbcore.autosuspend=1 resume=/dev/sda1 i915.modeset=1 i915.debug=1
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007f65a800 (usable)
 BIOS-e820: 000000007f65a800 - 0000000080000000 (reserved)
 BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7f65a max_arch_pfn = 0x100000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2040MB, range: 8MB, type UC
reg 2, base: 2039MB, range: 1MB, type UC
total RAM coverred: 2039M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 2 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000001000 (usable)
 modified: 0000000000001000 - 0000000000006000 (reserved)
 modified: 0000000000006000 - 0000000000008000 (usable)
 modified: 0000000000008000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 0000000000092000 (usable)
 modified: 000000000009f000 - 00000000000a0000 (reserved)
 modified: 0000000000100000 - 000000007f65a800 (usable)
 modified: 000000007f65a800 - 0000000080000000 (reserved)
 modified: 00000000f8000000 - 00000000fc000000 (reserved)
 modified: 00000000fec00000 - 00000000fec10000 (reserved)
 modified: 00000000fed18000 - 00000000fed1c000 (reserved)
 modified: 00000000fed20000 - 00000000fed90000 (reserved)
 modified: 00000000feda0000 - 00000000feda6000 (reserved)
 modified: 00000000fee00000 - 00000000fee10000 (reserved)
 modified: 00000000ffe00000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000007f65a000
 0000000000 - 007f600000 page 2M
 007f600000 - 007f65a000 page 4k
kernel direct mapping tables up to 7f65a000 @ 10000-14000
last_map_addr: 7f65a000 end: 7f65a000
ACPI: RSDP 000FBB10, 0024 (r2 DELL  )
ACPI: XSDT 7F65D200, 0064 (r1 DELL    M08     27D80715 ASL        61)
ACPI: FACP 7F65D09C, 00F4 (r4 DELL    M08     27D80715 ASL        61)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7F65D800, 63EA (r2 INT430 SYSFexxx     1001 INTL 20050624)
ACPI: FACS 7F66C000, 0040
ACPI: HPET 7F65D300, 0038 (r1 DELL    M08            1 ASL        61)
ACPI: APIC 7F65D400, 0068 (r1 DELL    M08     27D80715 ASL        47)
ACPI: ASF! 7F65D000, 007E (r32 DELL    M08     27D80715 ASL        61)
ACPI: MCFG 7F65D3C0, 003E (r16 DELL    M08     27D80715 ASL        61)
ACPI: TCPA 7F65D700, 0032 (r1                        0 ASL         0)
ACPI: SLIC 7F65D49C, 0176 (r1 DELL    M08     27D80715 ASL        61)
ACPI: SSDT 7F65B97E, 04CC (r1  PmRef    CpuPm     3000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
(5 early reservations) ==> bootmem [0000000000 - 007f65a000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 00009c1f1c]    TEXT DATA BSS ==> [0000200000 - 00009c1f1c]
  #3 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  #4 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
 [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x00000008
    0: 0x00000010 -> 0x00000092
    0: 0x00000100 -> 0x0007f65a
On node 0 totalpages: 521695
  DMA zone: 56 pages used for memmap
  DMA zone: 2087 pages reserved
  DMA zone: 1830 pages, LIFO batch:0
  DMA32 zone: 7079 pages used for memmap
  DMA32 zone: 510643 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 0000000000008000 - 0000000000010000
PM: Registered nosave memory: 0000000000092000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 49152 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 512473
Kernel command line: real_root=/dev/sda4 root=/dev/sda4 pcie_aspm=force usbcore.autosuspend=1 resume=/dev/sda1 i915.modeset=1 i915.debug=1
PCIe ASPM is forcedly enabled
Unknown boot option `usbcore.autosuspend=1': ignoring
Unknown boot option `i915.debug=1': ignoring
Initializing CPU#0
Experimental hierarchical RCU implementation.
Experimental hierarchical RCU init done.
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2394.225 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
allocated 20971520 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Checking aperture...
No AGP bridge found
Memory: 2025704k/2087272k available (4457k kernel code, 492k absent, 60672k reserved, 2077k data, 404k init)
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.45 BogoMIPS (lpj=2394225)
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
[ds] using Core 2/Atom configuration
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20081204
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20762 entries in 164 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz stepping 0b
Testing tracer nop: PASSED
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4787.75 BogoMIPS (lpj=2393879)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
[ds] using Core 2/Atom configuration
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     T7700  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9576.20 BogoMIPS).
net_namespace: 1488 bytes
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
dca service started, version 1.8
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI Warning (tbutils-0242): Incorrect checksum in table [TCPA] - 33, should be D7 [20081204]
ACPI: SSDT 7F66C080, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf6e00000-0xf6efffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf6f00000-0xf6ffffff]
pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6dfc000-0xf6dfffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf6dfb800-0xf6dfbfff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6dfb700-0xf6dfb7ff]
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:0c:00.0: reg 10 32bit mmio: [0xf6cff000-0xf6cfffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xf6c00000-0xf6cfffff]
pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf6a00000-0xf6bfffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xf69f0000-0xf69fffff]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: bridge 32bit mmio: [0xf6900000-0xf69fffff]
pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.4: reg 10 32bit mmio: [0xf68ff000-0xf68fffff]
pci 0000:03:01.4: reg 14 32bit mmio: [0xf68fe800-0xf68fefff]
pci 0000:03:01.4: supports D1 D2
pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf6800000-0xf68fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
	(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
	(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
	(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xc80-0xcaf has been reserved
system 00:05: ioport range 0xcc0-0xcff could not be reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:0b: ioport range 0x900-0x97f has been reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0xf400-0xf4fe has been reserved
system 00:0c: ioport range 0x1080-0x10bf has been reserved
system 00:0c: ioport range 0x10c0-0x10df has been reserved
system 00:0c: ioport range 0x809-0x809 has been reserved
system 00:0d: iomem range 0x0-0x9efff could not be reserved
system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff has been reserved
system 00:0d: iomem range 0x100000-0x7f65a7ff could not be reserved
system 00:0d: iomem range 0x7f65a800-0x7f6fffff has been reserved
system 00:0d: iomem range 0x7f700000-0x7f7fffff has been reserved
system 00:0d: iomem range 0x7f700000-0x7fefffff could not be reserved
system 00:0d: iomem range 0xffe00000-0xffffffff has been reserved
system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec0ffff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xf6c00000-0xf6cfffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.3:   IO window: 0xd000-0xdfff
pci 0000:00:1c.3:   MEM window: 0xf6a00000-0xf6bfffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000f0000000-0x000000f01fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.5:   IO window: disabled
pci 0000:00:1c.5:   MEM window: 0xf6900000-0xf69fffff
pci 0000:00:1c.5:   PREFETCH window: disabled
pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
pci 0000:03:01.0:   IO window: 0x002000-0x0020ff
pci 0000:03:01.0:   IO window: 0x002400-0x0024ff
pci 0000:03:01.0:   PREFETCH window: 0x88000000-0x8bffffff
pci 0000:03:01.0:   MEM window: 0x8c000000-0x8fffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
pci 0000:00:1e.0:   MEM window: 0xf6800000-0xf68fffff
pci 0000:00:1e.0:   PREFETCH window: 0x00000088000000-0x0000008bffffff
  alloc irq_desc for 16 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 17 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 19 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: enabling device (0000 -> 0003)
pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:0b: resource 0 mem: [0x0-0x0]
pci_bus 0000:0b: resource 1 mem: [0x0-0x0]
pci_bus 0000:0b: resource 2 mem: [0x0-0x0]
pci_bus 0000:0b: resource 3 mem: [0x0-0x0]
pci_bus 0000:0c: resource 0 mem: [0x0-0x0]
pci_bus 0000:0c: resource 1 mem: [0xf6c00000-0xf6cfffff]
pci_bus 0000:0c: resource 2 mem: [0x0-0x0]
pci_bus 0000:0c: resource 3 mem: [0x0-0x0]
pci_bus 0000:0d: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:0d: resource 1 mem: [0xf6a00000-0xf6bfffff]
pci_bus 0000:0d: resource 2 mem: [0xf0000000-0xf01fffff]
pci_bus 0000:0d: resource 3 mem: [0x0-0x0]
pci_bus 0000:09: resource 0 mem: [0x0-0x0]
pci_bus 0000:09: resource 1 mem: [0xf6900000-0xf69fffff]
pci_bus 0000:09: resource 2 mem: [0x0-0x0]
pci_bus 0000:09: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0xf6800000-0xf68fffff]
pci_bus 0000:03: resource 2 mem: [0x88000000-0x8bffffff]
pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:04: resource 0 io:  [0x2000-0x20ff]
pci_bus 0000:04: resource 1 io:  [0x2400-0x24ff]
pci_bus 0000:04: resource 2 mem: [0x88000000-0x8bffffff]
pci_bus 0000:04: resource 3 mem: [0x8c000000-0x8fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Scanning for low memory corruption every 60 seconds
Testing tracer sched_switch: PASSED
Testing tracer function: <7>Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
PASSED
Testing dynamic ftrace: PASSED
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
DLM (built Mar  6 2009 03:34:54) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 3957
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 24 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 25 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
  alloc irq_desc for 26 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
  alloc irq_desc for 27 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery present)
input: Lid Switch as /class/input/input0
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SBTN]
ACPI: SSDT 7F65C4B4, 02C8 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
ACPI: SSDT 7F65BE4A, 05E5 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7F65C77C, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
ACPI: SSDT 7F65C42F, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (59 C)
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 28 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
pci 0000:00:02.0: irq 28 for MSI/MSI-X
[drm] TV-15: set mode NTSC 480i 0
allocated 1920x1200 fb: 0x007df000, bo ffff88007e83e6c0
[drm] LVDS-8: set mode 1920x1200 17
Console: switching to colour frame buffer device 240x75
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 on minor 0
brd: module loaded
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
  alloc irq_desc for 18 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  alloc irq_desc for 29 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfb900 irq 29
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf6dfb800 port 0xf6dfba00 irq 29
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: WDC WD3200BMVS-11F9S0, 01.01A11, max UDMA/133
ata1.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BMVS-1 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata3: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.1: version 2.12
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
ata5: port disabled. ignoring.
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
iTCO_vendor_support: vendor-support=0
input: AT Translated Set 2 keyboard as /class/input/input3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
EDAC MC: Ver: 2.1.0 Mar  6 2009
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to TSC halts in idle
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SCTP: Hash tables configured (established 65536 bind 65536)
Clocksource tsc unstable (delta = -398238729 ns)
input: PS/2 Mouse as /class/input/input4
input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2009-03-06 03:57:32 UTC (1236311852)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
XFS mounting filesystem sda4
Ending clean XFS mount for filesystem: sda4
VFS: Mounted root (xfs filesystem) readonly on device 8:4.
Freeing unused kernel memory: 404k freed
Write protecting the kernel read-only data: 1680k
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Video Bus as /class/input/input6
ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
ACPI Warning (nspredef-0434): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20081204]
input: Video Bus as /class/input/input7
input: PC Speaker as /class/input/input8
ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
tg3.c:v3.97 (December 10, 2008)
tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:09:00.0: setting latency timer to 64
tg3 0000:09:00.0: PME# disabled
eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1d:09:bc:69:2c
eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01fe]
yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
uhci_hcd: USB Universal Host Controller Interface driver
  alloc irq_desc for 20 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29-rc7-00031-gc86ab6c uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
  alloc irq_desc for 21 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29-rc7-00031-gc86ab6c uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29-rc7-00031-gc86ab6c uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29-rc7-00031-gc86ab6c uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
  alloc irq_desc for 22 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.29-rc7-00031-gc86ab6c uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.29-rc7-00031-gc86ab6c ehci_hcd
usb usb6: SerialNumber: 0000:00:1a.7
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2008 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.29-rc7-00031-gc86ab6c ehci_hcd
usb usb7: SerialNumber: 0000:00:1d.7
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
yenta_cardbus 0000:03:01.0: Socket status: 30000006
pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf6800000 - 0xf68fffff
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
ohci1394 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[f68ff000-f68ff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:0c:00.0: PCI INT A disabled
wmaster0 (iwl3945): not using net_device_ops yet
phy0: Selected rate control algorithm 'iwl-3945-rs'
wlan0 (iwl3945): not using net_device_ops yet
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel Mic at Ext Left Jack as /class/input/input9
input: HDA Intel HP Out at Ext Left Jack as /class/input/input10
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: New USB device found, idVendor=413c, idProduct=8140
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2: configuration #1 chosen from 1 choice
usb 5-1: new full speed USB device using uhci_hcd and address 2
Bluetooth: Core ver 2.14
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.4
usbcore: registered new interface driver btusb
usb 5-1: New USB device found, idVendor=0b97, idProduct=7761
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 5-1: configuration #1 chosen from 1 choice
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[314fc00002643c70]
usb 5-1.2: new full speed USB device using uhci_hcd and address 3
usb 5-1.2: New USB device found, idVendor=0b97, idProduct=7772
usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.2: Product: O2Micro CCID SC Reader
usb 5-1.2: Manufacturer: O2
usb 5-1.2: configuration #1 chosen from 1 choice
tpm_tis 00:0a: 1.2 TPM (device-id 0x1002, rev-id 2)
ieee1394: raw1394: /dev/raw1394 device initialized
fuse init (API version 7.11)
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
swap_cgroup: uses 15288 bytes of vmalloc for pointer array space and 7827456 bytes to hold mem_cgroup pointers on swap
swap_cgroup can be disabled by noswapaccount boot option.
Adding 3911788k swap on /dev/sda1.  Priority:-1 extents:1 across:3911788k 
tg3 0000:09:00.0: PME# disabled
  alloc irq_desc for 30 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
tg3 0000:09:00.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
  alloc irq_desc for 31 on cpu 0 node 0
  alloc kstat_irqs on cpu 0 node 0
iwl3945 0000:0c:00.0: irq 31 for MSI/MSI-X
iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode
[drm] TV-15: set mode 1024x768 1f
