Linux version 2.6.30-ARCH (root@LX-Laptop) (gcc version 4.4.0 20090526 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jun 19 20:44:03 UTC 2009
Command line: root=/dev/mapper/cryptdev-archroot ro cryptdevice=/dev/sda5:cryptdev acpi_sleep=s3_bios resume=/dev/mapper/cryptdev-archswap
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
 BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bd4a1000 (usable)
 BIOS-e820: 00000000bd4a1000 - 00000000bd4a7000 (reserved)
 BIOS-e820: 00000000bd4a7000 - 00000000bd5b7000 (usable)
 BIOS-e820: 00000000bd5b7000 - 00000000bd60f000 (reserved)
 BIOS-e820: 00000000bd60f000 - 00000000bd6c6000 (usable)
 BIOS-e820: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS)
 BIOS-e820: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data)
 BIOS-e820: 00000000bd6d4000 - 00000000bd6d8000 (reserved)
 BIOS-e820: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS)
 BIOS-e820: 00000000bd6dc000 - 00000000bd6df000 (reserved)
 BIOS-e820: 00000000bd6df000 - 00000000bd706000 (ACPI NVS)
 BIOS-e820: 00000000bd706000 - 00000000bd708000 (ACPI data)
 BIOS-e820: 00000000bd708000 - 00000000bd90f000 (reserved)
 BIOS-e820: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS)
 BIOS-e820: 00000000bd99f000 - 00000000bd9ff000 (ACPI data)
 BIOS-e820: 00000000bd9ff000 - 00000000bda00000 (usable)
 BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
DMI present.
last_pfn = 0x13c000 max_arch_pfn = 0x100000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 13C000000 mask FFC000000 uncachable
  1 base 0BE000000 mask FFE000000 uncachable
  2 base 000000000 mask F80000000 write-back
  3 base 080000000 mask FC0000000 write-back
  4 base 100000000 mask FC0000000 write-back
  5 base 0BDE00000 mask FFFE00000 uncachable
  6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000bde00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbda00 max_arch_pfn = 0x100000000
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000001000 (usable)
 modified: 0000000000001000 - 0000000000006000 (reserved)
 modified: 0000000000006000 - 000000000009ec00 (usable)
 modified: 000000000009ec00 - 00000000000a0000 (reserved)
 modified: 00000000000dc000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 00000000bd4a1000 (usable)
 modified: 00000000bd4a1000 - 00000000bd4a7000 (reserved)
 modified: 00000000bd4a7000 - 00000000bd5b7000 (usable)
 modified: 00000000bd5b7000 - 00000000bd60f000 (reserved)
 modified: 00000000bd60f000 - 00000000bd6c6000 (usable)
 modified: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS)
 modified: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data)
 modified: 00000000bd6d4000 - 00000000bd6d8000 (reserved)
 modified: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS)
 modified: 00000000bd6dc000 - 00000000bd6df000 (reserved)
 modified: 00000000bd6df000 - 00000000bd706000 (ACPI NVS)
 modified: 00000000bd706000 - 00000000bd708000 (ACPI data)
 modified: 00000000bd708000 - 00000000bd90f000 (reserved)
 modified: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS)
 modified: 00000000bd99f000 - 00000000bd9ff000 (ACPI data)
 modified: 00000000bd9ff000 - 00000000bda00000 (usable)
 modified: 00000000bdc00000 - 00000000c0000000 (reserved)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000fec00000 - 00000000fec10000 (reserved)
 modified: 00000000fed00000 - 00000000fed00400 (reserved)
 modified: 00000000fed10000 - 00000000fed14000 (reserved)
 modified: 00000000fed18000 - 00000000fed1a000 (reserved)
 modified: 00000000fed1c000 - 00000000fed90000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000ff800000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 000000013c000000 (usable)
init_memory_mapping: 0000000000000000-00000000bda00000
 0000000000 - 00bda00000 page 2M
kernel direct mapping tables up to bda00000 @ 8000-c000
init_memory_mapping: 0000000100000000-000000013c000000
 0100000000 - 013c000000 page 2M
kernel direct mapping tables up to 13c000000 @ a000-10000
RAMDISK: 37def000 - 37fef0ff
ACPI: RSDP 00000000000f73a0 00024 (v02 LENOVO)
ACPI: XSDT 00000000bd97bd45 0009C (v01 LENOVO TP-6D    00001050  LTP 00000000)
ACPI: FACP 00000000bd97bf00 000F4 (v03 LENOVO TP-6D    00001050 LNVO 00000001)
ACPI: DSDT 00000000bd97c2f4 0D910 (v01 LENOVO TP-6D    00001050 MSFT 03000000)
ACPI: FACS 00000000bd98e000 00040
ACPI: SSDT 00000000bd97c0b4 00240 (v01 LENOVO TP-6D    00001050 MSFT 03000000)
ACPI: ECDT 00000000bd989c04 00052 (v01 LENOVO TP-6D    00001050 LNVO 00000001)
ACPI: APIC 00000000bd989c56 00078 (v01 LENOVO TP-6D    00001050 LNVO 00000001)
ACPI: MCFG 00000000bd989cce 0003C (v01 LENOVO TP-6D    00001050 LNVO 00000001)
ACPI: HPET 00000000bd989d0a 00038 (v01 LENOVO TP-6D    00001050 LNVO 00000001)
ACPI: SLIC 00000000bd989dc2 00176 (v01 LENOVO TP-6D    00001050  LTP 00000000)
ACPI: BOOT 00000000bd989f38 00028 (v01 LENOVO TP-6D    00001050  LTP 00000001)
ACPI: ASF! 00000000bd989f60 000A0 (v16 LENOVO TP-6D    00001050 PTL  00000001)
ACPI: SSDT 00000000bd98d203 0055F (v01 LENOVO TP-6D    00001050 INTL 20050513)
ACPI: TCPA 00000000bd707000 00032 (v00                 00000000      00000000)
ACPI: DMAR 00000000bd706000 00120 (v01                00000001      00000000)
ACPI: SSDT 00000000bd6d3000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: SSDT 00000000bd6d2000 00274 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 00000000bd6d1000 00242 (v01  PmRef    ApTst 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 013c000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0000200000 - 000082c110]    TEXT DATA BSS ==> [0000200000 - 000082c110]
  #3 [0037def000 - 0037fef0ff]          RAMDISK ==> [0037def000 - 0037fef0ff]
  #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
  #5 [000082d000 - 000082d14c]              BRK ==> [000082d000 - 000082d14c]
  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
  #7 [000000a000 - 000000b000]          PGTABLE ==> [000000a000 - 000000b000]
found SMP MP-table at [ffff8800000f73e0] f73e0
 [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x0013c000
Movable zone start PFN for each node
early_node_map[7] active PFN ranges
    0: 0x00000000 -> 0x00000001
    0: 0x00000006 -> 0x0000009e
    0: 0x00000100 -> 0x000bd4a1
    0: 0x000bd4a7 -> 0x000bd5b7
    0: 0x000bd60f -> 0x000bd6c6
    0: 0x000bd9ff -> 0x000bda00
    0: 0x00100000 -> 0x0013c000
On node 0 totalpages: 1021442
  DMA zone: 56 pages used for memmap
  DMA zone: 1683 pages reserved
  DMA zone: 2254 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 757409 pages, LIFO batch:31
  Normal zone: 3360 pages used for memmap
  Normal zone: 242400 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
PM: Registered nosave memory: 00000000bd4a1000 - 00000000bd4a7000
PM: Registered nosave memory: 00000000bd5b7000 - 00000000bd60f000
PM: Registered nosave memory: 00000000bd6c6000 - 00000000bd6d1000
PM: Registered nosave memory: 00000000bd6d1000 - 00000000bd6d4000
PM: Registered nosave memory: 00000000bd6d4000 - 00000000bd6d8000
PM: Registered nosave memory: 00000000bd6d8000 - 00000000bd6dc000
PM: Registered nosave memory: 00000000bd6dc000 - 00000000bd6df000
PM: Registered nosave memory: 00000000bd6df000 - 00000000bd706000
PM: Registered nosave memory: 00000000bd706000 - 00000000bd708000
PM: Registered nosave memory: 00000000bd708000 - 00000000bd90f000
PM: Registered nosave memory: 00000000bd90f000 - 00000000bd99f000
PM: Registered nosave memory: 00000000bd99f000 - 00000000bd9ff000
PM: Registered nosave memory: 00000000bda00000 - 00000000bdc00000
PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 25 pages at ffff880028023000, static data 72352 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1002063
Kernel command line: root=/dev/mapper/cryptdev-archroot ro cryptdevice=/dev/sda5:cryptdev acpi_sleep=s3_bios resume=/dev/mapper/cryptdev-archswap
Initializing CPU#0
NR_IRQS:768
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2394.232 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 3932012k/5177344k available (3406k kernel code, 1091576k absent, 152788k reserved, 1238k data, 460k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.98 BogoMIPS (lpj=7980773)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090320
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4789.54 BogoMIPS (lpj=7980079)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (9580.53 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
net_namespace: 1888 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - e3ffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query ignored
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf2000000-0xf23fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf2400000-0xf24fffff]
pci 0000:00:03.0: reg 10 64bit mmio: [0xf2826800-0xf282680f]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: reg 10 io port: [0x1828-0x182f]
pci 0000:00:03.2: reg 14 io port: [0x180c-0x180f]
pci 0000:00:03.2: reg 18 io port: [0x1820-0x1827]
pci 0000:00:03.2: reg 1c io port: [0x1808-0x180b]
pci 0000:00:03.2: reg 20 io port: [0x1810-0x181f]
pci 0000:00:03.3: reg 10 io port: [0x1830-0x1837]
pci 0000:00:03.3: reg 14 32bit mmio: [0xf2624000-0xf2624fff]
pci 0000:00:19.0: reg 10 32bit mmio: [0xf2600000-0xf261ffff]
pci 0000:00:19.0: reg 14 32bit mmio: [0xf2625000-0xf2625fff]
pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2826c00-0xf2826fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2620000-0xf2623fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2827000-0xf28273ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f]
pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f]
pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47]
pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b]
pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2826000-0xf28267ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2827400-0xf28274ff]
pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
pci 0000:03:00.0: reg 10 64bit mmio: [0xf2500000-0xf2501fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xf2500000-0xf25fffff]
pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf1ffffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf2900000-0xf29fffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff has been reserved
system 00:00: iomem range 0xc4000-0xc7fff has been reserved
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xcc000-0xcffff has been reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11ff has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x1641 has been reserved
system 00:02: ioport range 0x1600-0x161b has been reserved
system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: disabled
pci 0000:00:1c.1:   MEM window: 0xf2500000-0xf25fffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.3:   IO window: 0x2000-0x2fff
pci 0000:00:1c.3:   MEM window: 0xf0000000-0xf1ffffff
pci 0000:00:1c.3:   PREFETCH window: 0x000000f2900000-0x000000f29fffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:03: resource 1 mem: [0xf2500000-0xf25fffff]
pci_bus 0000:05: resource 0 io:  [0x2000-0x2fff]
pci_bus 0000:05: resource 1 mem: [0xf0000000-0xf1ffffff]
pci_bus 0000:05: resource 2 pref mem [0xf2900000-0xf29fffff]
pci_bus 0000:0d: resource 3 io:  [0x00-0xffff]
pci_bus 0000:0d: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Freeing initrd memory: 2048k freed
Simple Boot Flag at 0x35 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1246047949.563:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7685
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 460k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:03.2: setting latency timer to 64
pata_acpi 0000:00:03.2: PCI INT C disabled
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 27
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ATA-8: SAMSUNG HM320JI, 2SS00_01, max UDMA7
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
ata1.00: configured for UDMA/133
ata1: EH complete
scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM320JI  2SS0 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Intel AES-NI instructions are not detected.
PM: Starting manual resume from disk
PM: Starting manual resume from disk
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 141
fuse init (API version 7.11)
cfg80211: Calling CRDA to update world regulatory domain
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 28 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-agn-rs'
ACPI: SSDT 00000000bd6d6c20 002C8 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 00000000bd6d4020 0087A (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 00000000bd6d5ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT 00000000bd6d5f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320]
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 29 for MSI/MSI-X
Clocksource tsc unstable (delta = -238694571 ns)
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
allocated 1280x800 fb: 0x02020000, bo ffff88013a106540
Console: switching to colour frame buffer device 160x50
[drm] LVDS-8: set mode 1280x800 11
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input2
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
input: PC Speaker as /devices/platform/pcspkr/input/input3
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input4
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input5
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input6
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input7
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input9
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input10
ACPI: Sleep Button [SLPB]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (46 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (49 C)
Uniform Multi-Platform E-IDE driver
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
heci: module is from the staging directory, the quality is unknown, you have been warned.
heci: Intel(R) Management Engine Interface - version 5.0.0.31
heci: Copyright (c) 2003 - 2008 Intel Corporation.
heci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
heci 0000:00:03.0: setting latency timer to 64
heci: link layer has been established.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
heci driver initialization successful.
ACPI: WMI: Mapper loaded
sd 0:0:0:0: Attached scsi generic sg0 type 0
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 6DET28WW (1.05 ), EC 7XHT21WW-1.03
thinkpad_acpi: Lenovo ThinkPad X200, model 74585QG
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /devices/virtual/input/input11
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input12
EXT3 FS on dm-2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 4194296k swap on /dev/mapper/cryptdev-archswap.  Priority:-1 extents:1 across:4194296k 
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
  domain 1: span 0-1 level CPU
   groups: 0-1 (__cpu_power = 2048)
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
  domain 1: span 0-1 level CPU
   groups: 0-1 (__cpu_power = 2048)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
[drm] TMDS-14: set mode 1024x768 13
[drm] TMDS-16: set mode 1024x768 13
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
[drm] TMDS-16: set mode  15
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-2: unable to read EDID block.
i915 0000:00:02.0: DVI-D-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:1d:19:b0:1f:ed
wlan0: authenticated
wlan0: associate with AP 00:1d:19:b0:1f:ed
wlan0: associate with AP 00:1d:19:b0:1f:ed
wlan0: RX AssocResp from 00:1d:19:b0:1f:ed (capab=0x431 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
Monitor-Mwait will be used to enter C-3 state
CE: hpet increasing min_delta_ns to 15000 nsec
wlan0: deauthenticating by local choice (reason=3)
iwlagn 0000:03:00.0: PCI INT A disabled
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
HDA Intel 0000:00:1b.0: PCI INT B disabled
ACPI handle has no context!
heci 0000:00:03.0: PCI INT A disabled
[drm:gm45_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
i915 0000:00:02.0: power state changed by ACPI to D3
ACPI: Preparing to enter system sleep state S3
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching NULL sched-domain.
CPU1 is down
Extended CMOS year: 2000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Back to C!
CPU0: Thermal monitoring handled by SMI
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4791.82 BogoMIPS (lpj=7982112)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 06
kvm: enabling virtualization on CPU1
CPU0 attaching NULL sched-domain.
Switched to high resolution mode on CPU 1
CPU0 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 0 1
  domain 1: span 0-1 level CPU
   groups: 0-1 (__cpu_power = 2048)
CPU1 attaching sched-domain:
 domain 0: span 0-1 level MC
  groups: 1 0
  domain 1: span 0-1 level CPU
   groups: 0-1 (__cpu_power = 2048)
CPU1 is up
ACPI: Waking up from system sleep state S3
i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
heci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
pci 0000:00:03.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
pci 0000:00:03.2: restoring config space at offset 0x1 (was 0xb00005, writing 0xb00001)
serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
pci 0000:00:1a.0: power state changed by ACPI to D0
pci 0000:00:1a.2: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x200000f0, writing 0xf0)
pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
pci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
i915 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.1: PME# disabled
pci 0000:00:03.2: PME# disabled
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.7: PME# disabled
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: setting latency timer to 64
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.0: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
pci 0000:03:00.0: PME# disabled
sd 0:0:0:0: [sda] Starting disk
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
ata1.00: configured for UDMA/133
ata1.00: configured for UDMA/133
ata1: EH complete
Restarting tasks ... done.
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 28 for MSI/MSI-X
phy1: Selected rate control algorithm 'iwl-agn-rs'
iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
Registered led device: iwl-phy1::radio
Registered led device: iwl-phy1::assoc
Registered led device: iwl-phy1::RX
Registered led device: iwl-phy1::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
