Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.5-127.fc12.x86_64 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:11:14 EST 2009 Command line: ro root=UUID=67f58755-18ee-42ea-ad93-57c1e39b17eb LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007d5d7800 (usable) BIOS-e820: 000000007d5d7800 - 000000007d5dfc00 (ACPI data) BIOS-e820: 000000007d5dfc00 - 000000007d5e0000 (ACPI NVS) BIOS-e820: 000000007d5e0000 - 000000007de00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000180000000 (usable) DMI 2.1 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x180000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0FFF00000 mask FFFF00000 write-protect 2 base 100000000 mask F80000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 4095MB, range: 1MB, type WP reg 2, base: 4GB, range: 2GB, type WB total RAM coverred: 4096M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64K num_reg: 2 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 4GB, range: 2GB, type WB x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0x7d5d7 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007d5d7000 0000000000 - 007d400000 page 2M 007d400000 - 007d5d7000 page 4k kernel direct mapping tables up to 7d5d7000 @ 10000-14000 init_memory_mapping: 0000000100000000-0000000180000000 0100000000 - 0180000000 page 2M kernel direct mapping tables up to 180000000 @ 12000-19000 RAMDISK: 374d7000 - 37fef981 ACPI: RSDP 00000000000f9220 00024 (v02 PTECH ) ACPI: XSDT 000000007d5d9c99 00044 (v01 PTECH OEM00001 00000001 MSFT 0FE60097) ACPI: FACP 000000007d5d7800 000F4 (v04 PTECH OEM00001 00000001 MSFT 0FE60097) ACPI: DSDT 000000007d5d9cdd 05B8D (v01 PTECH DSDT0001 00000001 MSFT 02000002) ACPI: FACS 000000007d5dfc00 00040 ACPI: SLIC 000000007d5d9bbd 00024 (v01 PTECH SLIC 00000001 MSFT 02000002) ACPI: APIC 000000007d5d9be1 0005C (v02 PTECH OEM00001 00000001 MSFT 0FE60097) ACPI: BOOT 000000007d5d9c3d 00028 (v01 PTECH OEM00001 00000001 MSFT 0FE60097) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000180000000 Bootmem setup node 0 0000000000000000-0000000180000000 NODE_DATA [0000000000014000 - 0000000000029fff] bootmap [000000000002a000 - 0000000000059fff] pages 30 (8 early reservations) ==> bootmem [0000000000 - 0180000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 00019adb00] TEXT DATA BSS ==> [0001000000 - 00019adb00] #3 [00374d7000 - 0037fef981] RAMDISK ==> [00374d7000 - 0037fef981] #4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000] #5 [00019ae000 - 00019ae117] BRK ==> [00019ae000 - 00019ae117] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [0000012000 - 0000014000] PGTABLE ==> [0000012000 - 0000014000] found SMP MP-table at [ffff88000009bc90] 9bc90 [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00180000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009b 0: 0x00000100 -> 0x0007d5d7 0: 0x00100000 -> 0x00180000 On node 0 totalpages: 1037666 DMA zone: 56 pages used for memmap DMA zone: 107 pages reserved DMA zone: 3816 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 495119 pages, LIFO batch:31 Normal zone: 7168 pages used for memmap Normal zone: 517120 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009b000 - 000000000009c000 PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000007d5d7000 - 000000007d5d8000 PM: Registered nosave memory: 000000007d5d8000 - 000000007d5df000 PM: Registered nosave memory: 000000007d5df000 - 000000007d5e0000 PM: Registered nosave memory: 000000007d5e0000 - 000000007de00000 PM: Registered nosave memory: 000000007de00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at 7de00000 (gap: 7de00000:62200000) NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 29 pages at ffff880028028000, static data 90080 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1016055 Policy zone: Normal Kernel command line: ro root=UUID=67f58755-18ee-42ea-ad93-57c1e39b17eb LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet PID hash table entries: 4096 (order: 12, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4005528k/6291456k available (4227k kernel code, 2140792k absent, 145136k reserved, 2926k data, 1324k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:424 Fast TSC calibration using PIT Detected 2533.084 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Calibrating delay loop (skipped), value calculated using timer frequency.. 5066.16 BogoMIPS (lpj=2533084) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20852 entries in 82 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5065.89 BogoMIPS (lpj=2532945) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (10132.05 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=584 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=776 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=248 bytes sizeof(task_struct)=6008 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 1:05:37 Date: 12/02/09 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: SSDT 000000007d5d78f4 00BB6 (v01 GENSW Leg83627 00000001 MSFT 02000002) ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) DMAR: Forcing write-buffer flush capability pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: reg 10 64bit mmio: [0xcf800000-0xcfbfffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xb0000000-0xbfffffff] pci 0000:00:02.0: reg 20 io port: [0xe898-0xe89f] pci 0000:00:02.1: reg 10 64bit mmio: [0xcfe00000-0xcfefffff] pci 0000:00:19.0: reg 10 32bit mmio: [0xcfde0000-0xcfdfffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xcfddb000-0xcfddbfff] pci 0000:00:19.0: reg 18 io port: [0xec20-0xec3f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xec40-0xec5f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xcfdda800-0xcfddabff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xcfddc000-0xcfddffff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xec60-0xec7f] pci 0000:00:1d.1: reg 20 io port: [0xec80-0xec9f] pci 0000:00:1d.2: reg 20 io port: [0xeca0-0xecbf] pci 0000:00:1d.3: reg 20 io port: [0xecc0-0xecdf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xcfddac00-0xcfddafff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0xe8a0-0xe8a7] pci 0000:00:1f.2: reg 14 io port: [0xe8a8-0xe8ab] pci 0000:00:1f.2: reg 18 io port: [0xe8b0-0xe8b7] pci 0000:00:1f.2: reg 1c io port: [0xe8b8-0xe8bb] pci 0000:00:1f.2: reg 20 io port: [0xe8e0-0xe8ef] pci 0000:00:1f.2: reg 24 io port: [0xe8f0-0xe8ff] pci 0000:00:1f.3: reg 10 64bit mmio: [0xcfdda700-0xcfdda7ff] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff] pci 0000:00:1f.5: reg 10 io port: [0xe8c0-0xe8c7] pci 0000:00:1f.5: reg 14 io port: [0xe8c8-0xe8cb] pci 0000:00:1f.5: reg 18 io port: [0xe8d0-0xe8d7] pci 0000:00:1f.5: reg 1c io port: [0xe8d8-0xe8db] pci 0000:00:1f.5: reg 20 io port: [0xec00-0xec0f] pci 0000:00:1f.5: reg 24 io port: [0xec10-0xec1f] pci 0000:02:00.0: reg 10 64bit mmio: [0xdfe00000-0xdfefffff] pci 0000:02:00.0: reg 18 64bit mmio: [0xdc000000-0xddffffff] pci 0000:02:00.0: supports D1 pci 0000:00:01.0: bridge 32bit mmio: [0xdc000000-0xdfffffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xdbe00000-0xdbffffff] pci 0000:04:00.0: reg 18 64bit mmio: [0xdbc00000-0xdbdfffff] pci 0000:04:00.0: reg 20 64bit mmio: [0xd0000000-0xd7ffffff] pci 0000:04:00.0: supports D1 pci 0000:04:00.0: PME# supported from D0 D1 D3hot pci 0000:04:00.0: PME# disabled pci 0000:00:1c.0: bridge 32bit mmio: [0xdbe00000-0xdbffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xdbdfffff] pci 0000:06:08.0: reg 10 io port: [0xfcd0-0xfcd7] pci 0000:06:08.0: reg 14 io port: [0xfcd8-0xfcdb] pci 0000:06:08.0: reg 18 io port: [0xfce0-0xfce7] pci 0000:06:08.0: reg 1c io port: [0xfce8-0xfceb] pci 0000:06:08.0: reg 20 io port: [0xfcf0-0xfcff] pci 0000:06:08.0: reg 24 32bit mmio: [0xcff7ff00-0xcff7ffff] pci 0000:06:08.0: reg 30 32bit mmio: [0xcff80000-0xcfffffff] pci 0000:06:08.0: supports D1 D2 pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0xf000-0xffff] pci 0000:00:1e.0: bridge 32bit mmio: [0xcff00000-0xcfffffff] pci 0000:00:1c.1: bridge io port: [0x00-0xfff] pci 0000:00:1c.1: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:00:1c.2: bridge io port: [0x00-0xfff] pci 0000:00:1c.2: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:00:1c.3: bridge io port: [0x00-0xfff] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff] pci 0000:00:1c.4: bridge io port: [0x00-0xfff] pci 0000:00:1c.4: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x000000-0x0fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCXG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPCI._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPE3._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *5 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *9 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs *5 9 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 5 9 *10 11) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes pci 0000:00:1c.1: BAR 13: can't allocate resource pci 0000:00:1c.1: BAR 14: can't allocate resource pci 0000:00:1c.1: BAR 15: can't allocate resource pci 0000:00:1c.2: BAR 13: can't allocate resource pci 0000:00:1c.2: BAR 14: can't allocate resource pci 0000:00:1c.2: BAR 15: can't allocate resource pci 0000:00:1c.3: BAR 13: can't allocate resource pci 0000:00:1c.3: BAR 14: can't allocate resource pci 0000:00:1c.3: BAR 15: can't allocate resource pci 0000:00:1c.4: BAR 13: can't allocate resource pci 0000:00:1c.4: BAR 14: can't allocate resource pci 0000:00:1c.4: BAR 15: can't allocate resource NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:07: io resource (0xffff-0x10000) overlaps 0000:00:1e.0 BAR 13 (0xf000-0xffff), disabling pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered pci 0000:06:08.0: BAR 6: address space collision on of device [0xcff80000-0xcfffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:02 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xdc000000-0xdfffffff pci 0000:00:01.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xdbe00000-0xdbffffff pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000dbdfffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: disabled pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0a pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: disabled pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0xf000-0xffff pci 0000:00:1e.0: MEM window: 0xcff00000-0xcfffffff pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x800fffff alloc irq_desc for 16 on node 0 alloc kstat_irqs on node 0 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 17 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 19 on node 0 alloc kstat_irqs on node 0 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdfffffff] pci_bus 0000:04: resource 1 mem: [0xdbe00000-0xdbffffff] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xdbdfffff] pci_bus 0000:07: resource 0 mem: [0x0-0xfff] pci_bus 0000:07: resource 1 mem: [0x0-0xfffff] pci_bus 0000:07: resource 2 mem: [0x0-0xfffff] pci_bus 0000:08: resource 0 mem: [0x0-0xfff] pci_bus 0000:08: resource 1 mem: [0x0-0xfffff] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff] pci_bus 0000:09: resource 0 mem: [0x0-0xfff] pci_bus 0000:09: resource 1 mem: [0x0-0xfffff] pci_bus 0000:09: resource 2 mem: [0x0-0xfffff] pci_bus 0000:0a: resource 0 mem: [0x0-0xfff] pci_bus 0000:0a: resource 1 mem: [0x0-0xfffff] pci_bus 0000:0a: resource 2 mem: [0x0-0xfffff] pci_bus 0000:06: resource 0 io: [0xf000-0xffff] pci_bus 0000:06: resource 1 mem: [0xcff00000-0xcfffffff] pci_bus 0000:06: resource 2 pref mem [0x80000000-0x800fffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11362k freed Simple Boot Flag at 0x34 set to 0x80 audit: initializing netlink socket (disabled) type=2000 audit(1259715937.445:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7845 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 alloc irq_desc for 29 on node 0 alloc kstat_irqs on node 0 pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 ACPI Error (psargs-0359): [CTYP] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.TZ00._SCP] (Node ffff88017fc06d00), AE_NOT_FOUND thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (32 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input2 ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xe8a0 ctl 0xe8a8 bmdma 0xe8e0 irq 17 ata2: SATA max UDMA/133 cmd 0xe8b0 ctl 0xe8b8 bmdma 0xe8e8 irq 17 ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xe8c0 ctl 0xe8c8 bmdma 0xec00 irq 17 ata4: SATA max UDMA/133 cmd 0xe8d0 ctl 0xe8d8 bmdma 0xec08 irq 17 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xcfdda800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected alloc irq_desc for 20 on node 0 alloc kstat_irqs on node 0 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcfddac00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ec40 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000ec60 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected alloc irq_desc for 21 on node 0 alloc kstat_irqs on node 0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000ec80 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.1 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected alloc irq_desc for 22 on node 0 alloc kstat_irqs on node 0 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000eca0 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.2 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected alloc irq_desc for 23 on node 0 alloc kstat_irqs on node 0 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ecc0 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.3 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 242 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 5:800:52 rtc_cmos 00:06: setting system clock to 2009-12-02 01:05:38 UTC (1259715938) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 Clocksource tsc unstable (delta = -136329572 ns) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: INTEL SSDSA2MH160G1GC, 045C8781, max UDMA/133 ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/31) ata4.00: ATA-7: INTEL SSDSA2MH160G1GC, 045C8781, max UDMA/133 ata4.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/31) ata3.00: configured for UDMA/133 ata2.00: ATA-7: INTEL SSDSA2MH160G1GC, 045C8781, max UDMA/133 ata2.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/31) ata1.00: ATA-7: INTEL SSDSA2MH160G1GC, 045C8781, max UDMA/133 ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/31) ata4.00: configured for UDMA/133 ata2.00: configured for UDMA/133 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2MH16 045C PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA2MH16 045C PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 2:0:0:0: Direct-Access ATA INTEL SSDSA2MH16 045C PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB) sdb: sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdb1 sdb2 sdb3 sd 2:0:0:0: Attached scsi generic sg2 type 0 sdc1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: [sdc] Attached SCSI disk scsi 3:0:0:0: Direct-Access ATA INTEL SSDSA2MH16 045C PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sd 3:0:0:0: Attached scsi generic sg3 type 0 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sdd1 sdd2 sdd3 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 3:0:0:0: [sdd] Attached SCSI disk sd 0:0:0:0: [sda] Attached SCSI disk Freeing unused kernel memory: 1324k freed Write protecting the kernel read-only data: 6344k dracut: dracut-002-13.4.git8f397a9b.fc12 udev: starting version 145 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 alloc irq_desc for 30 on node 0 alloc kstat_irqs on node 0 i915 0000:00:02.0: irq 30 for MSI/MSI-X [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D [drm] TV-10: set mode NTSC 480i 0 input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [drm] DAC-6: set mode 1680x1050 28 Console: switching to colour frame buffer device 210x65 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 dracut: Starting plymouth daemon [drm] TV-10: set mode NTSC 480i 0 [drm] TV-10: set mode NTSC 480i 0 pata_sil680 0000:06:08.0: version 0.4.9 pata_sil680 0000:06:08.0: enabling device (0000 -> 0003) pata_sil680 0000:06:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sil680: 133MHz clock. scsi4 : pata_sil680 scsi5 : pata_sil680 ata5: PATA max UDMA/133 cmd 0xfcd0 ctl 0xfcd8 bmdma 0xfcf0 irq 19 ata6: PATA max UDMA/133 cmd 0xfce0 ctl 0xfce8 bmdma 0xfcf8 irq 19 FDC 0 is a post-1991 82077 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. dracut: Mounted root filesystem /dev/sdd1 dracut: Switching root udev: starting version 145 CSX 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 CSX 0000:02:00.0: setting latency timer to 64 e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 31 on node 0 alloc kstat_irqs on node 0 e1000e 0000:00:19.0: irq 31 for MSI/MSI-X iTCO_vendor_support: vendor-support=0 parport_pc 00:09: disabled parport_pc: probe of 00:09 failed with error -22 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:00:50:47:7c:f0 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ACPI: I/O resource 0000:00:1f.3 [0xece0-0xecff] conflicts with ACPI region SMBI [0xece0-0xecef] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:1b.0: setting latency timer to 64 ppdev: user-space parallel port driver ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3866: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3870: hp_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3871: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3874: dig-out=0x9/0x0 ALSA sound/pci/hda/hda_codec.c:3882: inputs: mic=0x10, fmic=0x0, line=0xf, fline=0x0, cd=0x12, aux=0x0 ALSA sound/pci/hda/hda_codec.c:3884: dig-in=0x8 input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 device-mapper: multipath: version 1.1.0 loaded EXT3 FS on sdd1, internal journal EXT4-fs (sdd2): barriers enabled kjournald2 starting: pid 731, dev sdd2:8, commit interval 5 seconds EXT4-fs (sdd2): internal journal on sdd2:8 EXT4-fs (sdd2): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sdd2): mounted filesystem with ordered data mode EXT4-fs (sda2): barriers enabled kjournald2 starting: pid 732, dev sda2:8, commit interval 5 seconds EXT4-fs (sda2): internal journal on sda2:8 EXT4-fs (sda2): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda2): mounted filesystem with ordered data mode EXT4-fs (sdb3): barriers enabled kjournald2 starting: pid 733, dev sdb3:8, commit interval 5 seconds EXT4-fs (sdb3): internal journal on sdb3:8 EXT4-fs (sdb3): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sdb3): mounted filesystem with ordered data mode EXT4-fs (sdc1): barriers enabled kjournald2 starting: pid 734, dev sdc1:8, commit interval 5 seconds EXT4-fs (sdc1): internal journal on sdc1:8 EXT4-fs (sdc1): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sdc1): mounted filesystem with ordered data mode Adding 2972016k swap on /dev/sdd3. Priority:-1 extents:1 across:2972016k SS microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c platform microcode: firmware: requesting intel-ucode/06-17-06 microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c platform microcode: firmware: requesting intel-ucode/06-17-06 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team e1000e 0000:00:19.0: irq 31 for MSI/MSI-X e1000e 0000:00:19.0: irq 31 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own eth0: no IPv6 routers present [drm] TV-10: set mode NTSC 480i 0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [] intel_tv_mode_set+0x231/0x7b2 [i915] PGD 173436067 PUD 170dfd067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1c.0/0000:04:00.0/resource CPU 1 Modules linked in: sunrpc ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table dm_multipath uinput snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm ppdev snd_timer i2c_i801 iTCO_wdt parport_pc iTCO_vendor_support snd e1000e soundcore snd_page_alloc parport csx pata_acpi ata_generic pata_sil680 floppy i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: microcode] Pid: 6475, comm: X Not tainted 2.6.31.5-127.fc12.x86_64 #1 Scotch Bonnet RIP: 0010:[] [] intel_tv_mode_set+0x231/0x7b2 [i915] RSP: 0018:ffff88013cfc18a8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88017851c000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000000c RBP: ffff88013cfc1948 R08: 00000000000001df R09: 0000000000000000 R10: 0000000000000040 R11: 0000000000000000 R12: ffff8801785e3800 R13: ffff8801785e6bd8 R14: ffffffffa007c0c0 R15: 00000000400200c0 FS: 00007f48116087e0(0000) GS:ffff880028045000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000008 CR3: 000000013cdb3000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process X (pid: 6475, threadinfo ffff88013cfc0000, task ffff8801731ac680) Stack: 0000034a785e5000 0000000c0000002c 0000000000000000 0000000000000000 <0> 0000000000000000 ffff880100000000 0000002c0000000c ffff8801785e5000 <0> 0000007a3cfc1948 0000000000000000 ffff880100000000 ffff880100000000 Call Trace: [] drm_crtc_helper_set_mode+0x287/0x34e [drm_kms_helper] [] intel_get_load_detect_pipe+0x101/0x14a [i915] [] intel_tv_detect+0x8d/0x14d [i915] [] drm_helper_probe_single_connector_modes+0xba/0x282 [drm_kms_helper] [] drm_mode_getconnector+0xf5/0x39a [drm] [] ? drm_mode_getconnector+0x0/0x39a [drm] [] drm_ioctl+0x237/0x2f4 [drm] [] vfs_ioctl+0x6f/0x87 [] ? finish_task_switch+0xc3/0xe6 [] do_vfs_ioctl+0x47b/0x4c1 [] sys_ioctl+0x56/0x79 [] system_call_fastpath+0x16/0x1b Code: 0f 45 d3 45 8b 9e 8c 00 00 00 44 89 5d 88 41 89 d3 41 81 cb 00 00 00 20 83 7d 88 00 41 0f 45 d3 45 8b 9e 90 00 00 00 44 89 5d c8 <45> 8b 59 08 44 89 5d 8c 45 8b 5e 7c 44 89 5d bc 45 8b 9e 80 00 RIP [] intel_tv_mode_set+0x231/0x7b2 [i915] RSP CR2: 0000000000000008 ---[ end trace 7c726309abe9f24b ]--- usb 2-3: new high speed USB device using ehci_hcd and address 2 usb 2-3: New USB device found, idVendor=0781, idProduct=5406 usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-3: Product: U3 Cruzer Micro usb 2-3: Manufacturer: SanDisk usb 2-3: SerialNumber: 24439311D941E1AF usb 2-3: configuration #1 chosen from 1 choice Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device scan complete scsi 6:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS scsi 6:0:0:1: CD-ROM SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 sd 6:0:0:0: Attached scsi generic sg4 type 0 sd 6:0:0:0: [sde] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB) sd 6:0:0:0: [sde] Write Protect is off sd 6:0:0:0: [sde] Mode Sense: 45 00 00 08 sd 6:0:0:0: [sde] Assuming drive cache: write through sr0: scsi3-mmc drive: 48x/48x tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:1: Attached scsi CD-ROM sr0 sr 6:0:0:1: Attached scsi generic sg5 type 5 sd 6:0:0:0: [sde] Assuming drive cache: write through sde: sde1 sd 6:0:0:0: [sde] Assuming drive cache: write through sd 6:0:0:0: [sde] Attached SCSI removable disk