[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-rc6-17-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-03-02 09:02:40 +0100
[    0.000000] Command line: root=/dev/disk/by-id/ata-WDC_WD1002FAEX-00Z3A0_WD-WCATR0310592-part5 resume=/dev/disk/by-id/ata-ST3320620AS_3QF0Z450-part2 splash=silent quiet drm.debug=0xe
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  BIOS-e820: 0000000040200000 - 00000000da858000 (usable)
[    0.000000]  BIOS-e820: 00000000da858000 - 00000000da8a7000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000da8a7000 - 00000000da8af000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000da8af000 - 00000000dabc9000 (reserved)
[    0.000000]  BIOS-e820: 00000000dabc9000 - 00000000dabca000 (usable)
[    0.000000]  BIOS-e820: 00000000dabca000 - 00000000dabda000 (reserved)
[    0.000000]  BIOS-e820: 00000000dabda000 - 00000000dabe7000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dabe7000 - 00000000dac0c000 (reserved)
[    0.000000]  BIOS-e820: 00000000dac0c000 - 00000000dac4f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dac4f000 - 00000000dae8a000 (reserved)
[    0.000000]  BIOS-e820: 00000000dae8a000 - 00000000db000000 (usable)
[    0.000000]  BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000021fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI:                  /DH67CL, BIOS BLH6710H.86A.0102.2011.0211.2236 02/11/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FE0000000 write-back
[    0.000000]   2 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 base 21FE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fcea0] fcea0
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000db000000
[    0.000000]  0000000000 - 00db000000 page 2M
[    0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000021fe00000
[    0.000000]  0100000000 - 021fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 21fe00000 @ daff6000-db000000
[    0.000000] RAMDISK: 1f6fd000 - 1fff0000
[    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02  INTEL)
[    0.000000] ACPI: XSDT 00000000da8a7068 0004C (v01 INTEL  DH67CL   01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000da8ae320 000F4 (v04 INTEL  DH67CL   01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000da8a7140 071DD (v02 INTEL  DH67CL   00000012 INTL 20051117)
[    0.000000] ACPI: FACS 00000000dabdef80 00040
[    0.000000] ACPI: APIC 00000000da8ae418 00092 (v03 INTEL  DH67CL   01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000da8ae4b0 001D6 (v01 INTEL  DH67CL   00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 00000000da8ae688 0003C (v01 INTEL  DH67CL   01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000da8ae6c8 00038 (v01 INTEL  DH67CL   01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000021fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000021fe00000
[    0.000000]   NODE_DATA [000000021fdec000 - 000000021fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217c00000-ffff88021edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0021fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[7] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040000
[    0.000000]     0: 0x00040200 -> 0x000da858
[    0.000000]     0: 0x000dabc9 -> 0x000dabca
[    0.000000]     0: 0x000dae8a -> 0x000db000
[    0.000000]     0: 0x00100000 -> 0x0021fe00
[    0.000000] On node 0 totalpages: 2073436
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3919 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 876039 pages, LIFO batch:31
[    0.000000]   Normal zone: 16121 pages used for memmap
[    0.000000]   Normal zone: 1163015 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000da858000 - 00000000da8a7000
[    0.000000] PM: Registered nosave memory: 00000000da8a7000 - 00000000da8af000
[    0.000000] PM: Registered nosave memory: 00000000da8af000 - 00000000dabc9000
[    0.000000] PM: Registered nosave memory: 00000000dabca000 - 00000000dabda000
[    0.000000] PM: Registered nosave memory: 00000000dabda000 - 00000000dabe7000
[    0.000000] PM: Registered nosave memory: 00000000dabe7000 - 00000000dac0c000
[    0.000000] PM: Registered nosave memory: 00000000dac0c000 - 00000000dac4f000
[    0.000000] PM: Registered nosave memory: 00000000dac4f000 - 00000000dae8a000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[    0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:1f31c000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f400000 s79744 r8192 d22656 u262144
[    0.000000] pcpu-alloc: s79744 r8192 d22656 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2042973
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1002FAEX-00Z3A0_WD-WCATR0310592-part5 resume=/dev/disk/by-id/ata-ST3320620AS_3QF0Z450-part2 splash=silent quiet drm.debug=0xe
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 8086488k/8910848k available (5283k kernel code, 617104k absent, 207256k reserved, 6172k data, 1028k init)
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 83886080 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 3392.513 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6785.02 BogoMIPS (lpj=3392513)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000044] Security Framework initialized
[    0.000053] AppArmor: AppArmor initialized
[    0.000554] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.001787] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002280] Mount-cache hash table entries: 256
[    0.002352] Initializing cgroup subsys ns
[    0.002354] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.002355] Initializing cgroup subsys cpuacct
[    0.002357] Initializing cgroup subsys memory
[    0.002366] Initializing cgroup subsys devices
[    0.002367] Initializing cgroup subsys freezer
[    0.002368] Initializing cgroup subsys net_cls
[    0.002380] Initializing cgroup subsys blkio
[    0.002403] CPU: Physical Processor ID: 0
[    0.002404] CPU: Processor Core ID: 0
[    0.002407] mce: CPU supports 9 MCE banks
[    0.002417] CPU0: Thermal monitoring enabled (TM1)
[    0.002422] using mwait in idle threads.
[    0.003063] ACPI: Core revision 20110112
[    0.236322] Setting APIC routing to flat
[    0.236673] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.246647] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
[    0.347386] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[    0.347390] ... version:                3
[    0.347390] ... bit width:              48
[    0.347391] ... generic registers:      4
[    0.347392] ... value mask:             0000ffffffffffff
[    0.347393] ... max period:             000000007fffffff
[    0.347393] ... fixed-purpose events:   3
[    0.347394] ... event mask:             000000070000000f
[    0.350472] NMI watchdog enabled, takes one hw-pmu counter.
[    0.354382] Booting Node   0, Processors  #1
[    0.445155] NMI watchdog enabled, takes one hw-pmu counter.
[    0.448110]  #2
[    0.538878] NMI watchdog enabled, takes one hw-pmu counter.
[    0.541827]  #3
[    0.632594] NMI watchdog enabled, takes one hw-pmu counter.
[    0.635546]  #4
[    0.726372] NMI watchdog enabled, takes one hw-pmu counter.
[    0.729268]  #5
[    0.820039] NMI watchdog enabled, takes one hw-pmu counter.
[    0.822985]  #6
[    0.913756] NMI watchdog enabled, takes one hw-pmu counter.
[    0.916706]  #7 Ok.
[    1.007477] NMI watchdog enabled, takes one hw-pmu counter.
[    1.008413] Brought up 8 CPUs
[    1.008416] Total of 8 processors activated (54271.03 BogoMIPS).
[    1.012500] devtmpfs: initialized
[    1.013175] print_constraints: dummy: 
[    1.013200] Time: 22:24:39  Date: 03/04/11
[    1.013234] NET: Registered protocol family 16
[    1.013336] ACPI: bus type pci registered
[    1.013387] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    1.013389] PCI: not using MMCONFIG
[    1.013390] PCI: Using configuration type 1 for base access
[    1.013998] bio: create slab <bio-0> at 0
[    1.014902] ACPI: EC: Look up EC in DSDT
[    1.015883] ACPI: Executed 1 blocks of module-level executable AML code
[    1.018596] ACPI: SSDT 00000000dabe6898 006F4 (v01    AMI      IST 00000001 MSFT 03000001)
[    1.018930] ACPI: Dynamic OEM Table Load:
[    1.018932] ACPI: SSDT           (null) 006F4 (v01    AMI      IST 00000001 MSFT 03000001)
[    1.018961] ACPI: SSDT 00000000dabddd98 000E4 (v01    AMI      CST 00000001 MSFT 03000001)
[    1.019181] ACPI: Dynamic OEM Table Load:
[    1.019182] ACPI: SSDT           (null) 000E4 (v01    AMI      CST 00000001 MSFT 03000001)
[    1.020070] ACPI: Interpreter enabled
[    1.020072] ACPI: (supports S0 S3 S4 S5)
[    1.020084] ACPI: Using IOAPIC for interrupt routing
[    1.020101] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    1.020164] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    1.030479] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.037490] ACPI: No dock devices found.
[    1.037491] HEST: Table not found.
[    1.037493] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.037714] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.037938] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
[    1.037939] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7]
[    1.037941] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df]
[    1.037942] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.037943] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.037944] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[    1.037945] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xffffffff]
[    1.037953] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    1.037978] pci 0000:00:02.0: [8086:0122] type 0 class 0x000300
[    1.037985] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[    1.037990] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.037993] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
[    1.038034] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    1.038055] pci 0000:00:16.0: reg 10: [mem 0xfe529000-0xfe52900f 64bit]
[    1.038111] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.038114] pci 0000:00:16.0: PME# disabled
[    1.038141] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
[    1.038157] pci 0000:00:19.0: reg 10: [mem 0xfe500000-0xfe51ffff]
[    1.038165] pci 0000:00:19.0: reg 14: [mem 0xfe528000-0xfe528fff]
[    1.038173] pci 0000:00:19.0: reg 18: [io  0xf080-0xf09f]
[    1.038218] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    1.038222] pci 0000:00:19.0: PME# disabled
[    1.038244] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    1.038263] pci 0000:00:1a.0: reg 10: [mem 0xfe527000-0xfe5273ff]
[    1.038334] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.038338] pci 0000:00:1a.0: PME# disabled
[    1.038359] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    1.038373] pci 0000:00:1b.0: reg 10: [mem 0xfe520000-0xfe523fff 64bit]
[    1.038423] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.038427] pci 0000:00:1b.0: PME# disabled
[    1.038445] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    1.038503] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.038506] pci 0000:00:1c.0: PME# disabled
[    1.038528] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    1.038585] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.038589] pci 0000:00:1c.3: PME# disabled
[    1.038618] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    1.038637] pci 0000:00:1d.0: reg 10: [mem 0xfe526000-0xfe5263ff]
[    1.038705] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.038708] pci 0000:00:1d.0: PME# disabled
[    1.038730] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601
[    1.038837] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[    1.038853] pci 0000:00:1f.2: reg 10: [io  0xf0d0-0xf0d7]
[    1.038860] pci 0000:00:1f.2: reg 14: [io  0xf0c0-0xf0c3]
[    1.038868] pci 0000:00:1f.2: reg 18: [io  0xf0b0-0xf0b7]
[    1.038875] pci 0000:00:1f.2: reg 1c: [io  0xf0a0-0xf0a3]
[    1.038882] pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
[    1.038889] pci 0000:00:1f.2: reg 24: [mem 0xfe525000-0xfe5257ff]
[    1.038918] pci 0000:00:1f.2: PME# supported from D3hot
[    1.038921] pci 0000:00:1f.2: PME# disabled
[    1.038936] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    1.038950] pci 0000:00:1f.3: reg 10: [mem 0xfe524000-0xfe5240ff 64bit]
[    1.038969] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
[    1.039053] pci 0000:01:00.0: [1283:8892] type 1 class 0x000604
[    1.039201] pci 0000:01:00.0: supports D1 D2
[    1.039202] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.039209] pci 0000:01:00.0: PME# disabled
[    1.039242] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.039255] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[    1.039259] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.039262] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.039268] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.039402] pci 0000:02:02.0: [109e:036e] type 0 class 0x000400
[    1.039451] pci 0000:02:02.0: reg 10: [mem 0xf0001000-0xf0001fff pref]
[    1.039682] pci 0000:02:02.1: [109e:0878] type 0 class 0x000480
[    1.039729] pci 0000:02:02.1: reg 10: [mem 0xf0000000-0xf0000fff pref]
[    1.040039] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[    1.040052] pci 0000:01:00.0:   bridge window [io  0xfff000-0x0000] (disabled)
[    1.040059] pci 0000:01:00.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.040073] pci 0000:01:00.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.040151] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
[    1.040176] pci 0000:03:00.0: reg 10: [mem 0xfe400000-0xfe401fff 64bit]
[    1.040278] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    1.040283] pci 0000:03:00.0: PME# disabled
[    1.042330] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[    1.042336] pci 0000:00:1c.3:   bridge window [io  0xf000-0x0000] (disabled)
[    1.042342] pci 0000:00:1c.3:   bridge window [mem 0xfe400000-0xfe4fffff]
[    1.042350] pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.042373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.042503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    1.042528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.BR21._PRT]
[    1.042576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    1.042675]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.042801]  pci0000:00: ACPI _OSC control (0x1d) granted
[    1.045653] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    1.045689] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    1.045724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[    1.045759] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.045793] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    1.045828] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    1.045863] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    1.045897] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    1.046025] SCSI subsystem initialized
[    1.046048] libata version 3.00 loaded.
[    1.046081] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.046086] vgaarb: loaded
[    1.046102] usbcore: registered new interface driver usbfs
[    1.046109] usbcore: registered new interface driver hub
[    1.046124] usbcore: registered new device driver usb
[    1.046162] PCI: Using ACPI for IRQ routing
[    1.046164] PCI: pci_cache_line_size set to 64 bytes
[    1.046238] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    1.046240] reserve RAM buffer: 00000000da858000 - 00000000dbffffff 
[    1.046242] reserve RAM buffer: 00000000dabca000 - 00000000dbffffff 
[    1.046244] reserve RAM buffer: 00000000db000000 - 00000000dbffffff 
[    1.046246] reserve RAM buffer: 000000021fe00000 - 000000021fffffff 
[    1.046303] NetLabel: Initializing
[    1.046304] NetLabel:  domain hash size = 128
[    1.046305] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.046313] NetLabel:  unlabeled traffic allowed by default
[    1.046322] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.046325] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.048335] Switching to clocksource hpet
[    1.048401] Switched to NOHz mode on CPU #4
[    1.049186] AppArmor: AppArmor Filesystem Enabled
[    1.049195] pnp: PnP ACPI init
[    1.049204] ACPI: bus type pnp registered
[    1.049288] Switched to NOHz mode on CPU #0
[    1.049331] pnp 00:00: [bus 00-ff]
[    1.049333] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.049334] pnp 00:00: [io  0x0000-0x03af window]
[    1.049335] pnp 00:00: [io  0x03e0-0x0cf7 window]
[    1.049336] pnp 00:00: [io  0x03b0-0x03df window]
[    1.049338] pnp 00:00: [io  0x0d00-0xffff window]
[    1.049339] Switched to NOHz mode on CPU #1
[    1.049344] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.049346] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    1.049347] pnp 00:00: [mem 0xdfa00000-0xffffffff window]
[    1.049348] pnp 00:00: [mem 0x00000000 window]
[    1.049353] Switched to NOHz mode on CPU #3
[    1.049355] Switched to NOHz mode on CPU #2
[    1.049357] Switched to NOHz mode on CPU #7
[    1.049358] Switched to NOHz mode on CPU #6
[    1.049360] Switched to NOHz mode on CPU #5
[    1.049380] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.049452] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[    1.049453] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[    1.049454] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[    1.049455] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    1.049456] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[    1.049482] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[    1.049484] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.049485] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.049487] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.049488] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[    1.049490] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.049566] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    1.049568] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    1.049569] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    1.049593] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.049854] pnp 00:03: [dma 4]
[    1.049855] pnp 00:03: [io  0x0000-0x000f]
[    1.049856] pnp 00:03: [io  0x0081-0x0083]
[    1.049857] pnp 00:03: [io  0x0087]
[    1.049858] pnp 00:03: [io  0x0089-0x008b]
[    1.049859] pnp 00:03: [io  0x008f]
[    1.049860] pnp 00:03: [io  0x00c0-0x00df]
[    1.049877] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.049884] pnp 00:04: [io  0x0070-0x0071]
[    1.049890] pnp 00:04: [irq 8]
[    1.049906] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.049912] pnp 00:05: [io  0x0061]
[    1.049926] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.049943] pnp 00:06: [io  0x0010-0x001f]
[    1.049945] pnp 00:06: [io  0x0022-0x003f]
[    1.049946] pnp 00:06: [io  0x0044-0x005f]
[    1.049946] pnp 00:06: [io  0x0062-0x0063]
[    1.049947] pnp 00:06: [io  0x0065-0x006f]
[    1.049948] pnp 00:06: [io  0x0072-0x007f]
[    1.049949] pnp 00:06: [io  0x0080]
[    1.049950] pnp 00:06: [io  0x0084-0x0086]
[    1.049951] pnp 00:06: [io  0x0088]
[    1.049952] pnp 00:06: [io  0x008c-0x008e]
[    1.049953] pnp 00:06: [io  0x0090-0x009f]
[    1.049954] pnp 00:06: [io  0x00a2-0x00bf]
[    1.049955] pnp 00:06: [io  0x00e0-0x00ef]
[    1.049956] pnp 00:06: [io  0x04d0-0x04d1]
[    1.049982] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    1.049984] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.049990] pnp 00:07: [io  0x00f0-0x00ff]
[    1.049994] pnp 00:07: [irq 13]
[    1.050009] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.050151] pnp 00:08: [io  0x0400-0x0453]
[    1.050152] pnp 00:08: [io  0x0458-0x047f]
[    1.050153] pnp 00:08: [io  0x1180-0x119f]
[    1.050154] pnp 00:08: [io  0x0500-0x057f]
[    1.050156] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    1.050157] pnp 00:08: [mem 0xfec00000-0xfecfffff]
[    1.050158] pnp 00:08: [mem 0xfed08000-0xfed08fff]
[    1.050159] pnp 00:08: [mem 0xff000000-0xffffffff]
[    1.050186] system 00:08: [io  0x0400-0x0453] has been reserved
[    1.050187] system 00:08: [io  0x0458-0x047f] has been reserved
[    1.050188] system 00:08: [io  0x1180-0x119f] has been reserved
[    1.050190] system 00:08: [io  0x0500-0x057f] has been reserved
[    1.050191] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.050193] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
[    1.050194] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[    1.050196] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    1.050197] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.050228] pnp 00:09: [io  0x0454-0x0457]
[    1.050252] system 00:09: [io  0x0454-0x0457] has been reserved
[    1.050254] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.050345] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[    1.050370] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.050492] pnp: PnP ACPI: found 11 devices
[    1.050493] ACPI: ACPI bus type pnp unregistered
[    1.056149] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[    1.056151] pci 0000:01:00.0:   bridge window [io  disabled]
[    1.056161] pci 0000:01:00.0:   bridge window [mem disabled]
[    1.056167] pci 0000:01:00.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.056181] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[    1.056182] pci 0000:00:1c.0:   bridge window [io  disabled]
[    1.056186] pci 0000:00:1c.0:   bridge window [mem disabled]
[    1.056189] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.056195] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[    1.056196] pci 0000:00:1c.3:   bridge window [io  disabled]
[    1.056200] pci 0000:00:1c.3:   bridge window [mem 0xfe400000-0xfe4fffff]
[    1.056204] pci 0000:00:1c.3:   bridge window [mem pref disabled]
[    1.056218] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.056221] pci 0000:00:1c.0: setting latency timer to 64
[    1.056233] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.056240] pci 0000:01:00.0: setting latency timer to 64
[    1.056249] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.056253] pci 0000:00:1c.3: setting latency timer to 64
[    1.056256] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    1.056257] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    1.056258] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    1.056259] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    1.056260] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    1.056261] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    1.056262] pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xffffffff]
[    1.056264] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.056265] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.056266] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[    1.056336] NET: Registered protocol family 2
[    1.056505] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.057190] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.058142] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.058257] TCP: Hash tables configured (established 524288 bind 65536)
[    1.058258] TCP reno registered
[    1.058267] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.058292] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.058422] NET: Registered protocol family 1
[    1.058431] pci 0000:00:02.0: Boot video device
[    1.058533] PCI: CLS 64 bytes, default 64
[    1.058562] Unpacking initramfs...
[    1.155690] Freeing initrd memory: 9164k freed
[    1.156466] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.156469] Placing 64MB software IO TLB between ffff88001b400000 - ffff88001f400000
[    1.156470] software IO TLB at phys 0x1b400000 - 0x1f400000
[    1.156990] Scanning for low memory corruption every 60 seconds
[    1.157131] audit: initializing netlink socket (disabled)
[    1.157139] type=2000 audit(1299277478.694:1): initialized
[    1.166674] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.167325] VFS: Disk quotas dquot_6.5.2
[    1.167352] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.167516] msgmni has been set to 3952
[    1.167650] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.167652] io scheduler noop registered
[    1.167653] io scheduler deadline registered
[    1.167677] io scheduler cfq registered (default)
[    1.167760] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.167803] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.167865] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.167902] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
[    1.167981] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.167982] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.167983] pci 0000:02:02.0: Signaling PME through PCIe PME interrupt
[    1.167984] pci 0000:02:02.1: Signaling PME through PCIe PME interrupt
[    1.167988] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.168002] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.168003] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.168007] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    1.168060] intel_idle: MWAIT substates: 0x1120
[    1.168061] intel_idle: v0.4 model 0x2A
[    1.168062] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.168098] ERST: Table is not found!
[    1.168134] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.295994] Non-volatile memory driver v1.3
[    1.295996] Linux agpgart interface v0.103
[    1.296038] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    1.296136] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.297429] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    1.297521] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    1.297569] i2c-core: driver [adp5520] using legacy suspend method
[    1.297570] i2c-core: driver [adp5520] using legacy resume method
[    1.297616] ahci 0000:00:1f.2: version 3.0
[    1.297627] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.297662] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.307731] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.307735] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
[    1.307742] ahci 0000:00:1f.2: setting latency timer to 64
[    1.318083] scsi0 : ahci
[    1.318158] scsi1 : ahci
[    1.318201] scsi2 : ahci
[    1.318243] scsi3 : ahci
[    1.318287] scsi4 : ahci
[    1.318330] scsi5 : ahci
[    1.318457] ata1: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525100 irq 42
[    1.318459] ata2: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525180 irq 42
[    1.318462] ata3: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525200 irq 42
[    1.318464] ata4: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525280 irq 42
[    1.318467] ata5: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525300 irq 42
[    1.318469] ata6: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525380 irq 42
[    1.318532] Fixed MDIO Bus: probed
[    1.318535] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.318547] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.318557] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.318560] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.318578] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.322683] ehci_hcd 0000:00:1a.0: debug port 2
[    1.326566] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.326576] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe527000
[    1.335618] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.335651] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.335654] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.335656] usb usb1: Product: EHCI Host Controller
[    1.335658] usb usb1: Manufacturer: Linux 2.6.38-rc6-17-desktop ehci_hcd
[    1.335660] usb usb1: SerialNumber: 0000:00:1a.0
[    1.335754] hub 1-0:1.0: USB hub found
[    1.335757] hub 1-0:1.0: 2 ports detected
[    1.335805] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.335814] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.335816] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.335821] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.340630] ehci_hcd 0000:00:1d.0: debug port 2
[    1.344490] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.344500] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe526000
[    1.353566] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.353592] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.353594] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.353597] usb usb2: Product: EHCI Host Controller
[    1.353599] usb usb2: Manufacturer: Linux 2.6.38-rc6-17-desktop ehci_hcd
[    1.353601] usb usb2: SerialNumber: 0000:00:1d.0
[    1.353690] hub 2-0:1.0: USB hub found
[    1.353692] hub 2-0:1.0: 2 ports detected
[    1.353731] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.353737] uhci_hcd: USB Universal Host Controller Interface driver
[    1.353761] Initializing USB Mass Storage driver...
[    1.353771] usbcore: registered new interface driver usb-storage
[    1.353772] USB Mass Storage support registered.
[    1.353777] usbcore: registered new interface driver ums-alauda
[    1.353781] usbcore: registered new interface driver ums-cypress
[    1.353786] usbcore: registered new interface driver ums-datafab
[    1.353791] usbcore: registered new interface driver ums-freecom
[    1.353798] usbcore: registered new interface driver ums-isd200
[    1.353803] usbcore: registered new interface driver ums-jumpshot
[    1.353808] usbcore: registered new interface driver ums-karma
[    1.353812] usbcore: registered new interface driver ums-onetouch
[    1.353817] usbcore: registered new interface driver ums-sddr09
[    1.353821] usbcore: registered new interface driver ums-sddr55
[    1.353826] usbcore: registered new interface driver ums-usbat
[    1.353854] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.356929] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.356946] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.356999] mousedev: PS/2 mouse device common for all mice
[    1.357068] rtc_cmos 00:04: RTC can wake from S4
[    1.362590] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.362621] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.362749] cpuidle: using governor ladder
[    1.362919] cpuidle: using governor menu
[    1.363033] usbcore: registered new interface driver usbhid
[    1.363034] usbhid: USB HID core driver
[    1.363145] TCP cubic registered
[    1.363344] NET: Registered protocol family 10
[    1.363748] lib80211: common routines for IEEE802.11 drivers
[    1.363749] lib80211_crypt: registered algorithm 'NULL'
[    1.363750] Registering the dns_resolver key type
[    1.363759] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[    1.363816] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST3320620AS_3QF0Z450-part2
[    1.621858] ata4: SATA link down (SStatus 0 SControl 300)
[    1.621891] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.621916] ata6: SATA link down (SStatus 0 SControl 300)
[    1.621931] ata3: SATA link down (SStatus 0 SControl 300)
[    1.621948] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.623999] ata1.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[    1.624004] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.626769] ata1.00: configured for UDMA/133
[    1.626893] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[    1.627011] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.627058] sd 0:0:0:0: [sda] Write Protect is off
[    1.627061] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.627080] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.636811] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.668413] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[    1.668417] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.726472] ata2.00: configured for UDMA/133
[    1.726604] scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[    1.726711] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.726741] sd 1:0:0:0: [sdb] Write Protect is off
[    1.726742] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.726752] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.741547]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[    1.741949] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.750819] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.750823] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.751097] hub 1-1:1.0: USB hub found
[    1.751168] hub 1-1:1.0: 6 ports detected
[    1.774392] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.853141] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.863392] ata5.00: ATAPI: PLEXTOR DVDR   PX-760A, 1.04, max UDMA/66
[    1.865056] ata5.00: configured for UDMA/66
[    1.870324]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 >
[    1.870654] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.967205] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.967210] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.967476] hub 2-1:1.0: USB hub found
[    1.967548] hub 2-1:1.0: 8 ports detected
[    2.041746] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[    2.155297] Refined TSC clocksource calibration: 3392.293 MHz.
[    2.155302] Switching to clocksource tsc
[    2.239270] usb 1-1.1: New USB device found, idVendor=0408, idProduct=3001
[    2.239274] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.239277] usb 1-1.1: Product: Optical Touch Screen
[    2.239279] usb 1-1.1: Manufacturer: QUANTA
[    2.272322] hub 1-1:1.0: unable to enumerate USB device on port 5
[    2.344876] usb 1-1.6: new low speed USB device using ehci_hcd and address 5
[    2.436749] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c043
[    2.436754] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.436756] usb 1-1.6: Product: USB-PS/2 Optical Mouse
[    2.436758] usb 1-1.6: Manufacturer: Logitech
[    2.440620] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input0
[    2.440672] generic-usb 0003:046D:C043.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.6/input0
[    2.617093] usb 1-1.5: new low speed USB device using ehci_hcd and address 6
[    2.707873] usb 1-1.5: New USB device found, idVendor=046a, idProduct=0023
[    2.707877] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.716752] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input1
[    2.716799] cherry 0003:046A:0023.0003: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1a.0-1.5/input0
[    2.721523] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input2
[    2.721566] cherry 0003:046A:0023.0004: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.0-1.5/input1
[    2.912339] scsi 4:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-760A   1.04 PQ: 0 ANSI: 5
[    2.912475] PM: Hibernation image not present or could not be loaded.
[    2.912486] registered taskstats version 1
[    2.912905]   Magic number: 3:988:450
[    2.913002] rtc_cmos 00:04: setting system clock to 2011-03-04 22:24:40 UTC (1299277480)
[    2.914100] Freeing unused kernel memory: 1028k freed
[    2.914180] Write protecting the kernel read-only data: 10240k
[    2.915805] Freeing unused kernel memory: 844k freed
[    2.916485] Freeing unused kernel memory: 304k freed
[    2.937659] ACPI: acpi_idle yielding to intel_idle
[    2.955754] Btrfs loaded
[    2.957426] uvesafb: failed to execute /sbin/v86d
[    2.957471] uvesafb: make sure that the v86d helper is installed and executable
[    2.957520] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    2.957564] uvesafb: vbe_init() failed with -22
[    2.957609] uvesafb: probe of uvesafb.0 failed with error -22
[    2.960740] udev[118]: starting version 166
[    2.970143] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    2.984901] ACPI: Power Button [PWRB]
[    2.984960] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    2.984990] ACPI: Power Button [PWRF]
[    2.988785] [drm] Initialized drm 1.1.0 20060810
[    2.998816] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.998819] i915 0000:00:02.0: setting latency timer to 64
[    3.043485] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    3.043486] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    3.043542] i915 GPIOB: SDA stuck high!
[    3.046763] i915 GPIOA: SDA stuck low!
[    3.046836] i915 GPIOC: SDA stuck high!
[    3.050753] i915 GPIOD: SDA stuck low!
[    3.050826] i915 GPIOE: SDA stuck high!
[    3.050908] i915 GPIOF: SDA stuck high!
[    3.050949] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdabda018
[    3.050960] [drm:intel_opregion_setup], Public ACPI methods supported
[    3.050961] [drm:intel_opregion_setup], SWSCI supported
[    3.050962] [drm:intel_opregion_setup], ASLE supported
[    3.050976] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    3.050979] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.050979] [drm] Driver supports precise vblank timestamp query.
[    3.050981] [drm:intel_detect_pch], Found CougarPoint PCH
[    3.074057] [drm:init_status_page], render ring hws offset: 0x00000000
[    3.074308] [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000
[    3.074426] [drm:init_status_page], blt ring hws offset: 0x00042000
[    3.074540] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-D  d
[    3.074542] [drm:parse_general_definitions], crt_ddc_bus_pin: 5
[    3.074544] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[    3.074546] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[    3.074552] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[    3.074560] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    3.074567] [drm:intel_modeset_init], 2 display pipes available.
[    3.074599] [drm:intel_crt_init], pch crt adpa set to 0xf40018
[    3.074643] i915 GPIOE: SDA stuck high!
[    3.126489] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb]
[    3.126501] i915 GPIOE: bus seems to be busy
[    3.130474] [drm:intel_sdvo_read_byte], i2c transfer returned -12
[    3.130476] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[    3.130552] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[    3.131065] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.131067] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    3.131578] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.131579] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    3.131641] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[    3.132153] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.132155] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    3.132669] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.132671] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    3.132688] [drm:intel_panel_get_backlight], get backlight PWM = 0
[    3.132695] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.134512] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[    3.134516] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[    3.160606] [drm:intel_update_watermarks], plane B (pipe 1) clock: 0
[    3.160608] [drm:intel_update_fbc], 
[    3.160993] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[    3.160995] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1
[    3.160996] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[    3.160997] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1
[    3.161416] [drm:intel_update_fbc], 
[    3.161541] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[    3.161545] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40018
[    3.171376] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[    3.171382] [drm:intel_crt_detect], CRT not detected via hotplug
[    3.171385] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[    3.171390] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[    3.223225] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb]
[    3.223237] i915 GPIOE: bus seems to be busy
[    3.227198] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[    3.227200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1]
[    3.227711] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.227713] [drm:ironlake_dp_detect], DPCD: 0000
[    3.227714] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected
[    3.227716] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2]
[    3.279058] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd]
[    3.279091] i915 GPIOF: SDA stuck high!
[    3.279136] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected
[    3.279138] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[    3.279649] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.279651] [drm:ironlake_dp_detect], DPCD: 0000
[    3.279652] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[    3.279654] No connectors reported connected with modes
[    3.279655] [drm:drm_setup_crtcs], 
[    3.279656] [drm:drm_enable_connectors], connector 5 enabled? no
[    3.279657] [drm:drm_enable_connectors], connector 8 enabled? no
[    3.279658] [drm:drm_enable_connectors], connector 10 enabled? no
[    3.279659] [drm:drm_enable_connectors], connector 14 enabled? no
[    3.279660] [drm:drm_enable_connectors], connector 16 enabled? no
[    3.279662] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[    3.279664] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.282483] [drm:intelfb_create], allocated 1024x768 fb: 0x00063000, bo ffff88020bc0c400
[    3.282908] [drm:drm_crtc_helper_set_config], 
[    3.282909] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[    3.282914] [drm:drm_crtc_helper_set_config], 
[    3.282914] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[    3.284122] Console: switching to colour frame buffer device 128x48
[    3.285323] fb0: inteldrmfb frame buffer device
[    3.285324] drm: registered panic notifier
[    3.285332] No ACPI video bus found
[    3.285411] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.340355] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[    4.340358] PM: Marking nosave pages: 0000000020000000 - 0000000020200000
[    4.340364] PM: Marking nosave pages: 0000000040000000 - 0000000040200000
[    4.340370] PM: Marking nosave pages: 00000000da858000 - 00000000dabc9000
[    4.340380] PM: Marking nosave pages: 00000000dabca000 - 00000000dae8a000
[    4.340388] PM: Marking nosave pages: 00000000db000000 - 0000000100000000
[    4.340788] PM: Basic memory bitmaps created
[    4.362396] PM: Basic memory bitmaps freed
[    4.467516] PM: Starting manual resume from disk
[    4.467518] PM: Hibernation image partition 8:18 present
[    4.467519] PM: Looking for hibernation image.
[    4.467664] PM: Image not found (code -22)
[    4.467666] PM: Hibernation image not present or could not be loaded.
[    4.476411] device fsid 43c66fc60f997c-f4936d0fb26e8893 devid 1 transid 575831 /dev/sda5
[    9.519163] udev[382]: starting version 166
[   10.041837] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   10.041854] xhci_hcd 0000:03:00.0: setting latency timer to 64
[   10.041857] xhci_hcd 0000:03:00.0: xHCI Host Controller
[   10.041864] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[   10.048863] xhci_hcd 0000:03:00.0: irq 19, io mem 0xfe400000
[   10.048921] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[   10.048923] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[   10.048926] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[   10.048928] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[   10.048930] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[   10.048933] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[   10.048935] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[   10.048937] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
[   10.052173] usb usb3: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
[   10.052180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[   10.052182] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.052184] usb usb3: Product: xHCI Host Controller
[   10.052186] usb usb3: Manufacturer: Linux 2.6.38-rc6-17-desktop xhci_hcd
[   10.052187] usb usb3: SerialNumber: 0000:03:00.0
[   10.052263] xHCI xhci_add_endpoint called for root hub
[   10.052265] xHCI xhci_check_bandwidth called for root hub
[   10.052292] hub 3-0:1.0: USB hub found
[   10.052295] hub 3-0:1.0: 4 ports detected
[   10.052925] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   10.054482] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.147000] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[   10.147001] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[   10.147021] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   10.147027] e1000e 0000:00:19.0: setting latency timer to 64
[   10.147108] e1000e 0000:00:19.0: irq 52 for MSI/MSI-X
[   10.395434] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) e0:69:95:01:f2:02
[   10.395436] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[   10.395468] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[   10.398541] eth0 renamed to eth2 by udevd [385]
[   10.409858] udev[385]: renamed network interface eth0 to eth2
[   10.484037] iTCO_vendor_support: vendor-support=0
[   10.485121] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   10.485186] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   10.485245] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.606830] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.606852] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   10.606871] scsi 4:0:0:0: Attached scsi generic sg2 type 5
[   10.645771] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   10.791034] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.791076] HDA Intel 0000:00:1b.0: irq 53 for MSI/MSI-X
[   10.791096] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.887063] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   10.887067] cdrom: Uniform CD-ROM driver Revision: 3.20
[   10.887206] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   11.231047] IR NEC protocol handler initialized
[   11.250709] ALSA patch_realtek.c:1530: SKU: Nid=0x1d sku_cfg=0x4006f601
[   11.250712] ALSA patch_realtek.c:1532: SKU: port_connectivity=0x1
[   11.250713] ALSA patch_realtek.c:1533: SKU: enable_pcbeep=0x0
[   11.250714] ALSA patch_realtek.c:1534: SKU: check_sum=0x00000006
[   11.250715] ALSA patch_realtek.c:1535: SKU: customization=0x000000f6
[   11.250717] ALSA patch_realtek.c:1536: SKU: external_amp=0x0
[   11.250718] ALSA patch_realtek.c:1537: SKU: platform_type=0x0
[   11.250719] ALSA patch_realtek.c:1538: SKU: swap=0x0
[   11.250720] ALSA patch_realtek.c:1539: SKU: override=0x1
[   11.250879] hda_codec: ALC892: BIOS auto-probing.
[   11.250882] ALSA hda_codec.c:4633: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0)
[   11.250883] ALSA hda_codec.c:4637:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.250885] ALSA hda_codec.c:4641:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.250886] ALSA hda_codec.c:4642:    mono: mono_out=0x0
[   11.250888] ALSA hda_codec.c:4645:    dig-out=0x11/0x1e
[   11.250889] ALSA hda_codec.c:4646:    inputs:
[   11.250890] ALSA hda_codec.c:4652: 
[   11.252924] ALSA patch_realtek.c:1587: realtek: No valid SSID, checking pincfg 0x4006f601 for NID 0x1d
[   11.252926] ALSA patch_realtek.c:1603: realtek: Enabling init ASM_ID=0xf601 CODEC_ID=10ec0892
[   11.255874] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   11.255989] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   11.266364] input: QUANTA Optical Touch Screen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input7
[   11.266449] quanta-touch 0003:0408:3001.0001: input,hidraw3: USB HID v1.10 Device [QUANTA Optical Touch Screen] on usb-0000:00:1a.0-1.1/input0
[   11.410405] IR RC5(x) protocol handler initialized
[   11.427277] Linux video capture interface: v2.00
[   11.437629] IR RC6 protocol handler initialized
[   11.441471] bttv: driver version 0.9.18 loaded
[   11.441473] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   11.441490] bttv: Bt8xx card found (0).
[   11.441504] bttv 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   11.441520] bttv0: Bt878 (rev 17) at 0000:02:02.0, irq: 18, latency: 32, mmio: 0xf0001000
[   11.441538] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[   11.441539] bttv0: using: Hauppauge (bt878) [card=10,insmod option]
[   11.441587] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
[   11.444091] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[   11.444170] bt878 #0 [sw]: Test OK
[   11.471856] IR JVC protocol handler initialized
[   11.500456] tveeprom 11-0050: Hauppauge model 44354, rev C142, serial# 2294605
[   11.500458] tveeprom 11-0050: tuner model is Temic 4009FR5 (idx 42, type 20)
[   11.500459] tveeprom 11-0050: TV standards PAL(B/G) (eeprom 0x04)
[   11.500460] tveeprom 11-0050: audio processor is MSP3415 (idx 6)
[   11.500461] tveeprom 11-0050: has radio
[   11.500462] bttv0: Hauppauge eeprom indicates model#44354
[   11.500463] bttv0: tuner type=20
[   12.319978] IR Sony protocol handler initialized
[   12.349396] i2c-core: driver [msp3400] using legacy suspend method
[   12.349398] i2c-core: driver [msp3400] using legacy resume method
[   12.364850] msp3400 11-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw])
[   12.364852] msp3400 11-0040: msp3400 supports nicam, mode is autodetect
[   12.483359] lirc_dev: IR Remote Control driver registered, major 251 
[   12.486052] IR LIRC bridge handler initialized
[   12.496004] i2c-core: driver [tuner] using legacy suspend method
[   12.496006] i2c-core: driver [tuner] using legacy resume method
[   12.502689] tuner 11-0061: chip found @ 0xc2 (bt878 #0 [sw])
[   12.586081] tuner-simple 11-0061: creating new instance
[   12.586083] tuner-simple 11-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
[   12.587296] bttv0: registered device video0
[   12.587314] bttv0: registered device vbi0
[   12.587331] bttv0: registered device radio0
[   12.590163] bttv0: PLL: 28636363 => 35468950 .. ok
[   13.260515] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[   13.260520] [drm:intel_crt_detect], CRT not detected via hotplug
[   13.260523] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[   13.311374] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb]
[   13.311386] i915 GPIOE: bus seems to be busy
[   13.315355] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[   13.315868] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   13.315871] [drm:ironlake_dp_detect], DPCD: 0000
[   13.315874] [drm:output_poll_execute], [CONNECTOR:10:DP-1] status updated from 2 to 2
[   13.368202] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd]
[   13.368249] i915 GPIOF: SDA stuck high!
[   13.368295] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] status updated from 2 to 2
[   13.368811] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   13.368813] [drm:ironlake_dp_detect], DPCD: 0000
[   13.368814] [drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
[   14.729804] Adding 2104508k swap on /dev/sdb2.  Priority:-1 extents:1 across:2104508k 
[   14.738642] Adding 4193276k swap on /dev/sda2.  Priority:-2 extents:1 across:4193276k 
[   16.086343] device-mapper: uevent: version 1.0.3
[   16.086391] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[   37.042034] kjournald starting.  Commit interval 15 seconds
[   37.042204] EXT3-fs (sda1): using internal journal
[   37.042209] EXT3-fs (sda1): mounted filesystem with ordered data mode
[   37.083154] kjournald starting.  Commit interval 15 seconds
[   37.083418] EXT3-fs (sdb5): using internal journal
[   37.083423] EXT3-fs (sdb5): mounted filesystem with ordered data mode
[   37.208050] REISERFS (device sdb3): found reiserfs format "3.6" with standard journal
[   37.208061] REISERFS (device sdb3): using ordered data mode
[   37.208063] reiserfs: using flush barriers
[   37.211595] REISERFS (device sdb3): journal params: device sdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   37.211786] REISERFS (device sdb3): checking transaction log (sdb3)
[   37.274126] REISERFS (device sdb3): Using r5 hash to sort names
[   37.319291] REISERFS (device sdb6): found reiserfs format "3.6" with standard journal
[   37.319303] REISERFS (device sdb6): using ordered data mode
[   37.319305] reiserfs: using flush barriers
[   37.326900] REISERFS (device sdb6): journal params: device sdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   37.327087] REISERFS (device sdb6): checking transaction log (sdb6)
[   37.357452] REISERFS (device sdb6): Using r5 hash to sort names
[   37.385105] REISERFS (device sdb7): found reiserfs format "3.6" with standard journal
[   37.385118] REISERFS (device sdb7): using ordered data mode
[   37.385120] reiserfs: using flush barriers
[   37.392941] REISERFS (device sdb7): journal params: device sdb7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   37.393126] REISERFS (device sdb7): checking transaction log (sdb7)
[   37.431470] REISERFS (device sdb7): Using r5 hash to sort names
[   37.465066] REISERFS (device sdb8): found reiserfs format "3.6" with standard journal
[   37.465079] REISERFS (device sdb8): using ordered data mode
[   37.465081] reiserfs: using flush barriers
[   37.472773] REISERFS (device sdb8): journal params: device sdb8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   37.472959] REISERFS (device sdb8): checking transaction log (sdb8)
[   37.515064] REISERFS (device sdb8): Using r5 hash to sort names
[   37.555890] REISERFS (device sdb10): found reiserfs format "3.6" with standard journal
[   37.555904] REISERFS (device sdb10): using ordered data mode
[   37.555906] reiserfs: using flush barriers
[   37.561605] REISERFS (device sdb10): journal params: device sdb10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   37.561785] REISERFS (device sdb10): checking transaction log (sdb10)
[   37.592438] REISERFS (device sdb10): Using r5 hash to sort names
[   37.624445] REISERFS (device sdb11): found reiserfs format "3.6" with standard journal
[   37.624459] REISERFS (device sdb11): using ordered data mode
[   37.624461] reiserfs: using flush barriers
[   37.632136] REISERFS (device sdb11): journal params: device sdb11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   37.632324] REISERFS (device sdb11): checking transaction log (sdb11)
[   37.681576] REISERFS (device sdb11): Using r5 hash to sort names
[   37.727014] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   37.754347] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   37.794474] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   37.801918] device fsid 4747820d8139ac1c-e87e5507e36ff49c devid 1 transid 55812 /dev/sda9
[   38.460985] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   38.518935] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   38.536554] kjournald starting.  Commit interval 15 seconds
[   38.536735] EXT3-fs (sda12): using internal journal
[   38.536741] EXT3-fs (sda12): mounted filesystem with ordered data mode
[   41.122103] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   41.154456] ip_tables: (C) 2000-2006 Netfilter Core Team
[   41.579995] coretemp coretemp.0: TjMax is 98 C.
[   41.580031] coretemp coretemp.1: TjMax is 98 C.
[   41.580057] coretemp coretemp.2: TjMax is 98 C.
[   41.580104] coretemp coretemp.3: TjMax is 98 C.
[   46.737348] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[   50.644743] e1000e 0000:00:19.0: irq 52 for MSI/MSI-X
[   50.695561] e1000e 0000:00:19.0: irq 52 for MSI/MSI-X
[   50.695979] ADDRCONF(NETDEV_UP): eth2: link is not ready
[   52.300858] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[   52.300861] e1000e 0000:00:19.0: eth2: 10/100 speed: disabling TSO
[   52.301258] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[   53.259486] NET: Registered protocol family 17
[   60.392149] [drm:i915_driver_open], 
[   60.392171] [drm:drm_crtc_helper_set_config], 
[   60.392172] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[   60.392177] [drm:drm_crtc_helper_set_config], 
[   60.392178] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[   60.392201] [drm:i915_driver_open], 
[   60.392367] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
[   60.392369] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
[   60.392395] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   60.392397] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[   60.392401] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[   60.392402] [drm:intel_crt_detect], CRT not detected via hotplug
[   60.392405] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[   60.392407] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   60.392408] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[   60.392411] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[   60.392412] [drm:intel_crt_detect], CRT not detected via hotplug
[   60.392413] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[   60.392436] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[   60.392438] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[   60.442607] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb]
[   60.442620] i915 GPIOE: bus seems to be busy
[   60.446579] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[   60.446583] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[   60.446584] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[   60.498461] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb]
[   60.498470] i915 GPIOE: bus seems to be busy
[   60.502417] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[   60.502463] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   60.502465] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1]
[   60.502975] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   60.502977] [drm:ironlake_dp_detect], DPCD: 0000
[   60.502978] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected
[   60.502980] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   60.502981] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1]
[   60.503491] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   60.503492] [drm:ironlake_dp_detect], DPCD: 0000
[   60.503493] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected
[   60.503510] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   60.503511] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2]
[   60.555271] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd]
[   60.555301] i915 GPIOF: SDA stuck high!
[   60.555342] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected
[   60.555346] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   60.555347] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2]
[   60.607130] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd]
[   60.607159] i915 GPIOF: SDA stuck high!
[   60.607200] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected
[   60.607238] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
[   60.607240] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[   60.607752] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   60.607753] [drm:ironlake_dp_detect], DPCD: 0000
[   60.607754] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[   60.607756] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
[   60.607757] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[   60.608269] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   60.608270] [drm:ironlake_dp_detect], DPCD: 0000
[   60.608271] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[   60.608302] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   60.608304] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[   60.608307] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[   60.608309] [drm:intel_crt_detect], CRT not detected via hotplug
[   60.608310] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[   60.608312] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   60.608313] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[   60.608315] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[   60.608316] [drm:intel_crt_detect], CRT not detected via hotplug
[   60.608317] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[   60.608335] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[   60.608337] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[   60.659991] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb]
[   60.660003] i915 GPIOE: bus seems to be busy
[   60.663953] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[   60.663957] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[   60.663959] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[   60.715827] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb]
[   60.715839] i915 GPIOE: bus seems to be busy
[   60.719795] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[   60.719828] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   60.719830] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1]
[   60.720341] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   60.720342] [drm:ironlake_dp_detect], DPCD: 0000
[   60.720344] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected
[   60.720345] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   60.720347] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1]
[   60.720858] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   60.720859] [drm:ironlake_dp_detect], DPCD: 0000
[   60.720860] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected
[   60.720876] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   60.720877] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2]
[   60.772667] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd]
[   60.772698] i915 GPIOF: SDA stuck high!
[   60.772741] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected
[   60.772744] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   60.772746] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2]
[   60.824530] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd]
[   60.824562] i915 GPIOF: SDA stuck high!
[   60.824604] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected
[   60.824633] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
[   60.824635] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[   60.825146] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   60.825147] [drm:ironlake_dp_detect], DPCD: 0000
[   60.825149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[   60.825151] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
[   60.825152] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[   60.825663] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   60.825664] [drm:ironlake_dp_detect], DPCD: 0000
[   60.825665] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[   60.956482] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[   60.956486] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[   62.416949] eth2: no IPv6 routers present
[   70.376860] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40018, result 0
[   70.376866] [drm:intel_crt_detect], CRT not detected via hotplug
[   70.376869] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[   70.428713] [drm] GMBUS timed out, falling back to bit banging on pin 5 [i915 gmbus dpb]
[   70.428725] i915 GPIOE: bus seems to be busy
[   70.432684] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[   70.433197] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   70.433199] [drm:ironlake_dp_detect], DPCD: 0000
[   70.433200] [drm:output_poll_execute], [CONNECTOR:10:DP-1] status updated from 2 to 2
[   70.484564] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd]
[   70.484595] i915 GPIOF: SDA stuck high!
[   70.484637] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] status updated from 2 to 2
[   70.485150] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   70.485151] [drm:ironlake_dp_detect], DPCD: 0000
[   70.485152] [drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
