[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-rc6-17-desktop (geeko@buildhost) (gcc version 4.5.1 20101208 [gcc-4_5-branch revision 167585] (SUSE Linux) ) #1 SMP PREEMPT 2011-03-02 09:02:40 +0100
[    0.000000] Command line: root=/dev/disk/by-id/ata-WDC_WD1002FAEX-00Z3A0_WD-WCATR0310592-part5 resume=/dev/disk/by-id/ata-ST3320620AS_3QF0Z450-part2 splash=silent quiet drm.debug=0xe
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[    0.000000]  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  BIOS-e820: 0000000040200000 - 00000000da858000 (usable)
[    0.000000]  BIOS-e820: 00000000da858000 - 00000000da8a7000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000da8a7000 - 00000000da8af000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000da8af000 - 00000000dabc9000 (reserved)
[    0.000000]  BIOS-e820: 00000000dabc9000 - 00000000dabca000 (usable)
[    0.000000]  BIOS-e820: 00000000dabca000 - 00000000dabda000 (reserved)
[    0.000000]  BIOS-e820: 00000000dabda000 - 00000000dabe7000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dabe7000 - 00000000dac0c000 (reserved)
[    0.000000]  BIOS-e820: 00000000dac0c000 - 00000000dac4f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dac4f000 - 00000000dae8a000 (reserved)
[    0.000000]  BIOS-e820: 00000000dae8a000 - 00000000db000000 (usable)
[    0.000000]  BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000021fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI:                  /DH67CL, BIOS BLH6710H.86A.0102.2011.0211.2236 02/11/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FE0000000 write-back
[    0.000000]   2 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 base 21FE00000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000db800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fcea0] fcea0
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000db000000
[    0.000000]  0000000000 - 00db000000 page 2M
[    0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000021fe00000
[    0.000000]  0100000000 - 021fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 21fe00000 @ daff6000-db000000
[    0.000000] RAMDISK: 1f6fd000 - 1fff0000
[    0.000000] ACPI: RSDP 00000000000f0450 00024 (v02  INTEL)
[    0.000000] ACPI: XSDT 00000000da8a7068 0004C (v01 INTEL  DH67CL   01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000da8ae320 000F4 (v04 INTEL  DH67CL   01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000da8a7140 071DD (v02 INTEL  DH67CL   00000012 INTL 20051117)
[    0.000000] ACPI: FACS 00000000dabdef80 00040
[    0.000000] ACPI: APIC 00000000da8ae418 00092 (v03 INTEL  DH67CL   01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 00000000da8ae4b0 001D6 (v01 INTEL  DH67CL   00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG 00000000da8ae688 0003C (v01 INTEL  DH67CL   01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000da8ae6c8 00038 (v01 INTEL  DH67CL   01072009 AMI. 00000004)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000021fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000021fe00000
[    0.000000]   NODE_DATA [000000021fdec000 - 000000021fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217c00000-ffff88021edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0021fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[7] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040000
[    0.000000]     0: 0x00040200 -> 0x000da858
[    0.000000]     0: 0x000dabc9 -> 0x000dabca
[    0.000000]     0: 0x000dae8a -> 0x000db000
[    0.000000]     0: 0x00100000 -> 0x0021fe00
[    0.000000] On node 0 totalpages: 2073436
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3919 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 876039 pages, LIFO batch:31
[    0.000000]   Normal zone: 16121 pages used for memmap
[    0.000000]   Normal zone: 1163015 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000da858000 - 00000000da8a7000
[    0.000000] PM: Registered nosave memory: 00000000da8a7000 - 00000000da8af000
[    0.000000] PM: Registered nosave memory: 00000000da8af000 - 00000000dabc9000
[    0.000000] PM: Registered nosave memory: 00000000dabca000 - 00000000dabda000
[    0.000000] PM: Registered nosave memory: 00000000dabda000 - 00000000dabe7000
[    0.000000] PM: Registered nosave memory: 00000000dabe7000 - 00000000dac0c000
[    0.000000] PM: Registered nosave memory: 00000000dac0c000 - 00000000dac4f000
[    0.000000] PM: Registered nosave memory: 00000000dac4f000 - 00000000dae8a000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000db800000
[    0.000000] PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:1f31c000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88001f400000 s79744 r8192 d22656 u262144
[    0.000000] pcpu-alloc: s79744 r8192 d22656 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2042973
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1002FAEX-00Z3A0_WD-WCATR0310592-part5 resume=/dev/disk/by-id/ata-ST3320620AS_3QF0Z450-part2 splash=silent quiet drm.debug=0xe
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 8086488k/8910848k available (5283k kernel code, 617104k absent, 207256k reserved, 6172k data, 1028k init)
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 83886080 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.001000] Detected 3392.081 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.16 BogoMIPS (lpj=3392081)
[    0.000004] pid_max: default: 32768 minimum: 301
[    0.000045] Security Framework initialized
[    0.000054] AppArmor: AppArmor initialized
[    0.000556] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.001789] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002296] Mount-cache hash table entries: 256
[    0.002369] Initializing cgroup subsys ns
[    0.002371] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.002372] Initializing cgroup subsys cpuacct
[    0.002374] Initializing cgroup subsys memory
[    0.002383] Initializing cgroup subsys devices
[    0.002384] Initializing cgroup subsys freezer
[    0.002386] Initializing cgroup subsys net_cls
[    0.002387] Initializing cgroup subsys blkio
[    0.002410] CPU: Physical Processor ID: 0
[    0.002411] CPU: Processor Core ID: 0
[    0.002414] mce: CPU supports 9 MCE banks
[    0.002424] CPU0: Thermal monitoring enabled (TM1)
[    0.002429] using mwait in idle threads.
[    0.003069] ACPI: Core revision 20110112
[    0.234654] Setting APIC routing to flat
[    0.235006] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.244978] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
[    0.346177] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[    0.346181] ... version:                3
[    0.346181] ... bit width:              48
[    0.346182] ... generic registers:      4
[    0.346183] ... value mask:             0000ffffffffffff
[    0.346184] ... max period:             000000007fffffff
[    0.346184] ... fixed-purpose events:   3
[    0.346185] ... event mask:             000000070000000f
[    0.349264] NMI watchdog enabled, takes one hw-pmu counter.
[    0.353174] Booting Node   0, Processors  #1
[    0.443938] NMI watchdog enabled, takes one hw-pmu counter.
[    0.446900]  #2
[    0.537660] NMI watchdog enabled, takes one hw-pmu counter.
[    0.540618]  #3
[    0.631379] NMI watchdog enabled, takes one hw-pmu counter.
[    0.634337]  #4
[    0.725150] NMI watchdog enabled, takes one hw-pmu counter.
[    0.728059]  #5
[    0.818821] NMI watchdog enabled, takes one hw-pmu counter.
[    0.821775]  #6
[    0.912536] NMI watchdog enabled, takes one hw-pmu counter.
[    0.915497]  #7 Ok.
[    1.006260] NMI watchdog enabled, takes one hw-pmu counter.
[    1.007203] Brought up 8 CPUs
[    1.007207] Total of 8 processors activated (54270.19 BogoMIPS).
[    1.011287] devtmpfs: initialized
[    1.011960] print_constraints: dummy: 
[    1.011985] Time: 21:07:09  Date: 03/04/11
[    1.012020] NET: Registered protocol family 16
[    1.012124] ACPI: bus type pci registered
[    1.012174] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    1.012176] PCI: not using MMCONFIG
[    1.012177] PCI: Using configuration type 1 for base access
[    1.012787] bio: create slab <bio-0> at 0
[    1.013691] ACPI: EC: Look up EC in DSDT
[    1.014673] ACPI: Executed 1 blocks of module-level executable AML code
[    1.017380] ACPI: SSDT 00000000dabe6898 006F4 (v01    AMI      IST 00000001 MSFT 03000001)
[    1.017715] ACPI: Dynamic OEM Table Load:
[    1.017716] ACPI: SSDT           (null) 006F4 (v01    AMI      IST 00000001 MSFT 03000001)
[    1.017745] ACPI: SSDT 00000000dabddd98 000E4 (v01    AMI      CST 00000001 MSFT 03000001)
[    1.017966] ACPI: Dynamic OEM Table Load:
[    1.017967] ACPI: SSDT           (null) 000E4 (v01    AMI      CST 00000001 MSFT 03000001)
[    1.018857] ACPI: Interpreter enabled
[    1.018858] ACPI: (supports S0 S3 S4 S5)
[    1.018872] ACPI: Using IOAPIC for interrupt routing
[    1.018888] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    1.018951] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    1.029262] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    1.036280] ACPI: No dock devices found.
[    1.036282] HEST: Table not found.
[    1.036283] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.036504] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.036728] pci_root PNP0A08:00: host bridge window [io  0x0000-0x03af]
[    1.036730] pci_root PNP0A08:00: host bridge window [io  0x03e0-0x0cf7]
[    1.036731] pci_root PNP0A08:00: host bridge window [io  0x03b0-0x03df]
[    1.036732] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.036733] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.036734] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[    1.036736] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xffffffff]
[    1.036743] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[    1.036770] pci 0000:00:02.0: [8086:0122] type 0 class 0x000300
[    1.036777] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[    1.036781] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.036784] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
[    1.036824] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    1.036845] pci 0000:00:16.0: reg 10: [mem 0xfe529000-0xfe52900f 64bit]
[    1.036902] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.036906] pci 0000:00:16.0: PME# disabled
[    1.036932] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
[    1.036949] pci 0000:00:19.0: reg 10: [mem 0xfe500000-0xfe51ffff]
[    1.036957] pci 0000:00:19.0: reg 14: [mem 0xfe528000-0xfe528fff]
[    1.036965] pci 0000:00:19.0: reg 18: [io  0xf080-0xf09f]
[    1.037010] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    1.037013] pci 0000:00:19.0: PME# disabled
[    1.037036] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    1.037055] pci 0000:00:1a.0: reg 10: [mem 0xfe527000-0xfe5273ff]
[    1.037126] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.037129] pci 0000:00:1a.0: PME# disabled
[    1.037151] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    1.037165] pci 0000:00:1b.0: reg 10: [mem 0xfe520000-0xfe523fff 64bit]
[    1.037215] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.037219] pci 0000:00:1b.0: PME# disabled
[    1.037237] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    1.037295] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.037298] pci 0000:00:1c.0: PME# disabled
[    1.037321] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    1.037378] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.037381] pci 0000:00:1c.3: PME# disabled
[    1.037410] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    1.037429] pci 0000:00:1d.0: reg 10: [mem 0xfe526000-0xfe5263ff]
[    1.037497] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.037501] pci 0000:00:1d.0: PME# disabled
[    1.037523] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601
[    1.037630] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[    1.037647] pci 0000:00:1f.2: reg 10: [io  0xf0d0-0xf0d7]
[    1.037654] pci 0000:00:1f.2: reg 14: [io  0xf0c0-0xf0c3]
[    1.037661] pci 0000:00:1f.2: reg 18: [io  0xf0b0-0xf0b7]
[    1.037668] pci 0000:00:1f.2: reg 1c: [io  0xf0a0-0xf0a3]
[    1.037675] pci 0000:00:1f.2: reg 20: [io  0xf060-0xf07f]
[    1.037683] pci 0000:00:1f.2: reg 24: [mem 0xfe525000-0xfe5257ff]
[    1.037711] pci 0000:00:1f.2: PME# supported from D3hot
[    1.037714] pci 0000:00:1f.2: PME# disabled
[    1.037730] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    1.037743] pci 0000:00:1f.3: reg 10: [mem 0xfe524000-0xfe5240ff 64bit]
[    1.037763] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
[    1.037846] pci 0000:01:00.0: [1283:8892] type 1 class 0x000604
[    1.037995] pci 0000:01:00.0: supports D1 D2
[    1.037996] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.038004] pci 0000:01:00.0: PME# disabled
[    1.038037] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    1.038050] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[    1.038054] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.038057] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.038063] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.038196] pci 0000:02:02.0: [109e:036e] type 0 class 0x000400
[    1.038244] pci 0000:02:02.0: reg 10: [mem 0xf0001000-0xf0001fff pref]
[    1.038475] pci 0000:02:02.1: [109e:0878] type 0 class 0x000480
[    1.038523] pci 0000:02:02.1: reg 10: [mem 0xf0000000-0xf0000fff pref]
[    1.038833] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[    1.038846] pci 0000:01:00.0:   bridge window [io  0xfff000-0x0000] (disabled)
[    1.038853] pci 0000:01:00.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.038866] pci 0000:01:00.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.038945] pci 0000:03:00.0: [1033:0194] type 0 class 0x000c03
[    1.038970] pci 0000:03:00.0: reg 10: [mem 0xfe400000-0xfe401fff 64bit]
[    1.039072] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    1.039077] pci 0000:03:00.0: PME# disabled
[    1.041121] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[    1.041127] pci 0000:00:1c.3:   bridge window [io  0xf000-0x0000] (disabled)
[    1.041132] pci 0000:00:1c.3:   bridge window [mem 0xfe400000-0xfe4fffff]
[    1.041140] pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.041163] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.041293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    1.041319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.BR21._PRT]
[    1.041366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    1.041466]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.041591]  pci0000:00: ACPI _OSC control (0x1d) granted
[    1.044444] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    1.044480] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    1.044516] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[    1.044550] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.044585] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    1.044619] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    1.044654] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    1.044689] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    1.044816] SCSI subsystem initialized
[    1.044840] libata version 3.00 loaded.
[    1.044874] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.044879] vgaarb: loaded
[    1.044894] usbcore: registered new interface driver usbfs
[    1.044901] usbcore: registered new interface driver hub
[    1.044916] usbcore: registered new device driver usb
[    1.044954] PCI: Using ACPI for IRQ routing
[    1.044956] PCI: pci_cache_line_size set to 64 bytes
[    1.045029] reserve RAM buffer: 000000000009d800 - 000000000009ffff 
[    1.045031] reserve RAM buffer: 00000000da858000 - 00000000dbffffff 
[    1.045033] reserve RAM buffer: 00000000dabca000 - 00000000dbffffff 
[    1.045035] reserve RAM buffer: 00000000db000000 - 00000000dbffffff 
[    1.045037] reserve RAM buffer: 000000021fe00000 - 000000021fffffff 
[    1.045095] NetLabel: Initializing
[    1.045096] NetLabel:  domain hash size = 128
[    1.045097] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.045105] NetLabel:  unlabeled traffic allowed by default
[    1.045114] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.045118] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.047128] Switching to clocksource hpet
[    1.047181] Switched to NOHz mode on CPU #4
[    1.047976] AppArmor: AppArmor Filesystem Enabled
[    1.047985] pnp: PnP ACPI init
[    1.047995] ACPI: bus type pnp registered
[    1.048078] Switched to NOHz mode on CPU #0
[    1.048123] Switched to NOHz mode on CPU #1
[    1.048127] pnp 00:00: [bus 00-ff]
[    1.048129] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.048133] Switched to NOHz mode on CPU #3
[    1.048135] Switched to NOHz mode on CPU #6
[    1.048137] pnp 00:00: [io  0x0000-0x03af window]
[    1.048138] Switched to NOHz mode on CPU #5
[    1.048139] Switched to NOHz mode on CPU #7
[    1.048140] Switched to NOHz mode on CPU #2
[    1.048142] pnp 00:00: [io  0x03e0-0x0cf7 window]
[    1.048143] pnp 00:00: [io  0x03b0-0x03df window]
[    1.048144] pnp 00:00: [io  0x0d00-0xffff window]
[    1.048145] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.048146] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    1.048148] pnp 00:00: [mem 0xdfa00000-0xffffffff window]
[    1.048149] pnp 00:00: [mem 0x00000000 window]
[    1.048177] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.048246] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[    1.048248] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[    1.048249] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[    1.048250] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    1.048251] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[    1.048277] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[    1.048279] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.048280] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.048282] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.048283] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[    1.048285] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.048362] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    1.048363] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    1.048364] pnp 00:02: [io  0x0000-0xffffffffffffffff disabled]
[    1.048388] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.048651] pnp 00:03: [dma 4]
[    1.048652] pnp 00:03: [io  0x0000-0x000f]
[    1.048653] pnp 00:03: [io  0x0081-0x0083]
[    1.048654] pnp 00:03: [io  0x0087]
[    1.048655] pnp 00:03: [io  0x0089-0x008b]
[    1.048656] pnp 00:03: [io  0x008f]
[    1.048657] pnp 00:03: [io  0x00c0-0x00df]
[    1.048673] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.048681] pnp 00:04: [io  0x0070-0x0071]
[    1.048686] pnp 00:04: [irq 8]
[    1.048702] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.048708] pnp 00:05: [io  0x0061]
[    1.048723] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.048740] pnp 00:06: [io  0x0010-0x001f]
[    1.048741] pnp 00:06: [io  0x0022-0x003f]
[    1.048742] pnp 00:06: [io  0x0044-0x005f]
[    1.048743] pnp 00:06: [io  0x0062-0x0063]
[    1.048744] pnp 00:06: [io  0x0065-0x006f]
[    1.048745] pnp 00:06: [io  0x0072-0x007f]
[    1.048746] pnp 00:06: [io  0x0080]
[    1.048747] pnp 00:06: [io  0x0084-0x0086]
[    1.048748] pnp 00:06: [io  0x0088]
[    1.048749] pnp 00:06: [io  0x008c-0x008e]
[    1.048750] pnp 00:06: [io  0x0090-0x009f]
[    1.048751] pnp 00:06: [io  0x00a2-0x00bf]
[    1.048752] pnp 00:06: [io  0x00e0-0x00ef]
[    1.048753] pnp 00:06: [io  0x04d0-0x04d1]
[    1.048779] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    1.048781] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.048787] pnp 00:07: [io  0x00f0-0x00ff]
[    1.048791] pnp 00:07: [irq 13]
[    1.048806] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.048948] pnp 00:08: [io  0x0400-0x0453]
[    1.048950] pnp 00:08: [io  0x0458-0x047f]
[    1.048951] pnp 00:08: [io  0x1180-0x119f]
[    1.048952] pnp 00:08: [io  0x0500-0x057f]
[    1.048953] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    1.048954] pnp 00:08: [mem 0xfec00000-0xfecfffff]
[    1.048955] pnp 00:08: [mem 0xfed08000-0xfed08fff]
[    1.048956] pnp 00:08: [mem 0xff000000-0xffffffff]
[    1.048983] system 00:08: [io  0x0400-0x0453] has been reserved
[    1.048985] system 00:08: [io  0x0458-0x047f] has been reserved
[    1.048986] system 00:08: [io  0x1180-0x119f] has been reserved
[    1.048987] system 00:08: [io  0x0500-0x057f] has been reserved
[    1.048989] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.048991] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
[    1.048992] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[    1.048994] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    1.048995] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.049026] pnp 00:09: [io  0x0454-0x0457]
[    1.049050] system 00:09: [io  0x0454-0x0457] has been reserved
[    1.049052] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.049143] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[    1.049168] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.049289] pnp: PnP ACPI: found 11 devices
[    1.049290] ACPI: ACPI bus type pnp unregistered
[    1.054944] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[    1.054945] pci 0000:01:00.0:   bridge window [io  disabled]
[    1.054956] pci 0000:01:00.0:   bridge window [mem disabled]
[    1.054963] pci 0000:01:00.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.054977] pci 0000:00:1c.0: PCI bridge to [bus 01-02]
[    1.054977] pci 0000:00:1c.0:   bridge window [io  disabled]
[    1.054982] pci 0000:00:1c.0:   bridge window [mem disabled]
[    1.054985] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.054991] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[    1.054992] pci 0000:00:1c.3:   bridge window [io  disabled]
[    1.054996] pci 0000:00:1c.3:   bridge window [mem 0xfe400000-0xfe4fffff]
[    1.055000] pci 0000:00:1c.3:   bridge window [mem pref disabled]
[    1.055014] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.055017] pci 0000:00:1c.0: setting latency timer to 64
[    1.055029] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.055036] pci 0000:01:00.0: setting latency timer to 64
[    1.055045] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.055049] pci 0000:00:1c.3: setting latency timer to 64
[    1.055052] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    1.055053] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    1.055054] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    1.055055] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    1.055056] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    1.055057] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    1.055058] pci_bus 0000:00: resource 10 [mem 0xdfa00000-0xffffffff]
[    1.055060] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.055061] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.055062] pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
[    1.055131] NET: Registered protocol family 2
[    1.055299] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    1.055986] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.056935] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.057050] TCP: Hash tables configured (established 524288 bind 65536)
[    1.057051] TCP reno registered
[    1.057060] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.057085] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.057215] NET: Registered protocol family 1
[    1.057224] pci 0000:00:02.0: Boot video device
[    1.057327] PCI: CLS 64 bytes, default 64
[    1.057355] Unpacking initramfs...
[    1.154450] Freeing initrd memory: 9164k freed
[    1.155229] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.155232] Placing 64MB software IO TLB between ffff88001b400000 - ffff88001f400000
[    1.155233] software IO TLB at phys 0x1b400000 - 0x1f400000
[    1.155751] Scanning for low memory corruption every 60 seconds
[    1.155885] audit: initializing netlink socket (disabled)
[    1.155894] type=2000 audit(1299272828.693:1): initialized
[    1.165485] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.166133] VFS: Disk quotas dquot_6.5.2
[    1.166160] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.166326] msgmni has been set to 3952
[    1.166460] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.166462] io scheduler noop registered
[    1.166463] io scheduler deadline registered
[    1.166487] io scheduler cfq registered (default)
[    1.166570] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.166612] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.166673] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.166709] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
[    1.166786] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.166788] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.166789] pci 0000:02:02.0: Signaling PME through PCIe PME interrupt
[    1.166790] pci 0000:02:02.1: Signaling PME through PCIe PME interrupt
[    1.166794] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.166808] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    1.166809] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.166813] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    1.166865] intel_idle: MWAIT substates: 0x1120
[    1.166866] intel_idle: v0.4 model 0x2A
[    1.166867] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.166903] ERST: Table is not found!
[    1.166939] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.294784] Non-volatile memory driver v1.3
[    1.294785] Linux agpgart interface v0.103
[    1.294827] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    1.294925] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.296218] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    1.296308] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    1.296355] i2c-core: driver [adp5520] using legacy suspend method
[    1.296356] i2c-core: driver [adp5520] using legacy resume method
[    1.296400] ahci 0000:00:1f.2: version 3.0
[    1.296409] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.296444] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    1.306523] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.306527] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
[    1.306533] ahci 0000:00:1f.2: setting latency timer to 64
[    1.316875] scsi0 : ahci
[    1.316950] scsi1 : ahci
[    1.316992] scsi2 : ahci
[    1.317035] scsi3 : ahci
[    1.317080] scsi4 : ahci
[    1.317122] scsi5 : ahci
[    1.317250] ata1: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525100 irq 42
[    1.317252] ata2: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525180 irq 42
[    1.317255] ata3: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525200 irq 42
[    1.317257] ata4: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525280 irq 42
[    1.317260] ata5: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525300 irq 42
[    1.317262] ata6: SATA max UDMA/133 abar m2048@0xfe525000 port 0xfe525380 irq 42
[    1.317324] Fixed MDIO Bus: probed
[    1.317327] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.317341] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.317350] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.317353] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.317372] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.321475] ehci_hcd 0000:00:1a.0: debug port 2
[    1.325363] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.325374] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe527000
[    1.334410] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.334444] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.334447] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.334449] usb usb1: Product: EHCI Host Controller
[    1.334451] usb usb1: Manufacturer: Linux 2.6.38-rc6-17-desktop ehci_hcd
[    1.334453] usb usb1: SerialNumber: 0000:00:1a.0
[    1.334546] hub 1-0:1.0: USB hub found
[    1.334548] hub 1-0:1.0: 2 ports detected
[    1.334595] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    1.334604] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.334607] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.334611] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.339422] ehci_hcd 0000:00:1d.0: debug port 2
[    1.343287] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.343297] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe526000
[    1.352358] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.352384] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.352387] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.352389] usb usb2: Product: EHCI Host Controller
[    1.352391] usb usb2: Manufacturer: Linux 2.6.38-rc6-17-desktop ehci_hcd
[    1.352393] usb usb2: SerialNumber: 0000:00:1d.0
[    1.352482] hub 2-0:1.0: USB hub found
[    1.352484] hub 2-0:1.0: 2 ports detected
[    1.352524] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.352529] uhci_hcd: USB Universal Host Controller Interface driver
[    1.352553] Initializing USB Mass Storage driver...
[    1.352563] usbcore: registered new interface driver usb-storage
[    1.352564] USB Mass Storage support registered.
[    1.352569] usbcore: registered new interface driver ums-alauda
[    1.352573] usbcore: registered new interface driver ums-cypress
[    1.352578] usbcore: registered new interface driver ums-datafab
[    1.352583] usbcore: registered new interface driver ums-freecom
[    1.352590] usbcore: registered new interface driver ums-isd200
[    1.352596] usbcore: registered new interface driver ums-jumpshot
[    1.352600] usbcore: registered new interface driver ums-karma
[    1.352605] usbcore: registered new interface driver ums-onetouch
[    1.352609] usbcore: registered new interface driver ums-sddr09
[    1.352613] usbcore: registered new interface driver ums-sddr55
[    1.352618] usbcore: registered new interface driver ums-usbat
[    1.352647] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.355353] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.355369] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.355422] mousedev: PS/2 mouse device common for all mice
[    1.355490] rtc_cmos 00:04: RTC can wake from S4
[    1.361382] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.361413] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.361542] cpuidle: using governor ladder
[    1.361711] cpuidle: using governor menu
[    1.361824] usbcore: registered new interface driver usbhid
[    1.361825] usbhid: USB HID core driver
[    1.361937] TCP cubic registered
[    1.362178] NET: Registered protocol family 10
[    1.362575] lib80211: common routines for IEEE802.11 drivers
[    1.362577] lib80211_crypt: registered algorithm 'NULL'
[    1.362578] Registering the dns_resolver key type
[    1.362586] libceph: loaded (mon/osd proto 15/24, osdmap 5/5 5/5)
[    1.362643] PM: Checking hibernation image partition /dev/disk/by-id/ata-ST3320620AS_3QF0Z450-part2
[    1.620646] ata4: SATA link down (SStatus 0 SControl 300)
[    1.620676] ata6: SATA link down (SStatus 0 SControl 300)
[    1.620704] ata3: SATA link down (SStatus 0 SControl 300)
[    1.620720] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.620739] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.622783] ata1.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[    1.622788] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.625167] ata1.00: configured for UDMA/133
[    1.625285] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[    1.625400] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.625447] sd 0:0:0:0: [sda] Write Protect is off
[    1.625449] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.625468] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.635574] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.664904] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[    1.664909] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.723047] ata2.00: configured for UDMA/133
[    1.723185] scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[    1.723310] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.723336] sd 1:0:0:0: [sdb] Write Protect is off
[    1.723337] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.723346] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.739393]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[    1.739795] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.749626] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.749630] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.749869] hub 1-1:1.0: USB hub found
[    1.749962] hub 1-1:1.0: 6 ports detected
[    1.773213] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.851934] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.862147] ata5.00: ATAPI: PLEXTOR DVDR   PX-760A, 1.04, max UDMA/66
[    1.863809] ata5.00: configured for UDMA/66
[    1.866834]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 >
[    1.867177] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.966015] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.966019] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.966271] hub 2-1:1.0: USB hub found
[    1.966344] hub 2-1:1.0: 8 ports detected
[    2.040543] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[    2.154116] Refined TSC clocksource calibration: 3392.293 MHz.
[    2.154120] Switching to clocksource tsc
[    2.237820] usb 1-1.1: New USB device found, idVendor=0408, idProduct=3001
[    2.237824] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.237827] usb 1-1.1: Product: Optical Touch Screen
[    2.237829] usb 1-1.1: Manufacturer: QUANTA
[    2.271117] hub 1-1:1.0: unable to enumerate USB device on port 5
[    2.343670] usb 1-1.6: new low speed USB device using ehci_hcd and address 5
[    2.435681] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c043
[    2.435685] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.435688] usb 1-1.6: Product: USB-PS/2 Optical Mouse
[    2.435690] usb 1-1.6: Manufacturer: Logitech
[    2.439418] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input0
[    2.439469] generic-usb 0003:046D:C043.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.6/input0
[    2.615888] usb 1-1.5: new low speed USB device using ehci_hcd and address 6
[    2.706918] usb 1-1.5: New USB device found, idVendor=046a, idProduct=0023
[    2.706922] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.715544] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input1
[    2.715591] cherry 0003:046A:0023.0003: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:0023] on usb-0000:00:1a.0-1.5/input0
[    2.720564] input: HID 046a:0023 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input2
[    2.720607] cherry 0003:046A:0023.0004: input,hidraw2: USB HID v1.11 Device [HID 046a:0023] on usb-0000:00:1a.0-1.5/input1
[    2.910965] scsi 4:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-760A   1.04 PQ: 0 ANSI: 5
[    2.911109] PM: Hibernation image not present or could not be loaded.
[    2.911120] registered taskstats version 1
[    2.911539]   Magic number: 3:573:145
[    2.911545] ata_port ata2: hash matches
[    2.911546]  ata2: hash matches
[    2.911561] acpi device:16: hash matches
[    2.911640] rtc_cmos 00:04: setting system clock to 2011-03-04 21:07:11 UTC (1299272831)
[    2.912745] Freeing unused kernel memory: 1028k freed
[    2.912824] Write protecting the kernel read-only data: 10240k
[    2.914440] Freeing unused kernel memory: 844k freed
[    2.915122] Freeing unused kernel memory: 304k freed
[    2.936123] ACPI: acpi_idle yielding to intel_idle
[    2.954158] Btrfs loaded
[    2.955844] uvesafb: failed to execute /sbin/v86d
[    2.955891] uvesafb: make sure that the v86d helper is installed and executable
[    2.955940] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[    2.955986] uvesafb: vbe_init() failed with -22
[    2.956031] uvesafb: probe of uvesafb.0 failed with error -22
[    2.959164] udev[117]: starting version 166
[    2.967768] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    2.977721] ACPI: Power Button [PWRB]
[    2.977784] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    2.977822] ACPI: Power Button [PWRF]
[    2.987183] [drm] Initialized drm 1.1.0 20060810
[    2.997626] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.997629] i915 0000:00:02.0: setting latency timer to 64
[    3.042261] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    3.042263] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    3.042320] i915 GPIOB: SDA stuck high!
[    3.045553] i915 GPIOA: SDA stuck low!
[    3.045625] i915 GPIOC: SDA stuck high!
[    3.049540] i915 GPIOD: SDA stuck low!
[    3.049612] i915 GPIOE: SDA stuck high!
[    3.049694] i915 GPIOF: SDA stuck high!
[    3.049735] [drm:intel_opregion_setup], graphic opregion physical addr: 0xdabda018
[    3.049745] [drm:intel_opregion_setup], Public ACPI methods supported
[    3.049746] [drm:intel_opregion_setup], SWSCI supported
[    3.049747] [drm:intel_opregion_setup], ASLE supported
[    3.049762] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    3.049765] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.049766] [drm] Driver supports precise vblank timestamp query.
[    3.049768] [drm:intel_detect_pch], Found CougarPoint PCH
[    3.073252] [drm:init_status_page], render ring hws offset: 0x00000000
[    3.073510] [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000
[    3.073628] [drm:init_status_page], blt ring hws offset: 0x00042000
[    3.073744] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-D  d
[    3.073746] [drm:parse_general_definitions], crt_ddc_bus_pin: 5
[    3.073749] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[    3.073750] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[    3.073756] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[    3.073764] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[    3.073772] [drm:intel_modeset_init], 2 display pipes available.
[    3.073804] [drm:intel_crt_init], pch crt adpa set to 0xf40000
[    3.073847] i915 GPIOE: SDA stuck high!
[    3.075429] [drm:intel_sdvo_read_byte], i2c transfer returned 0
[    3.075432] [drm:intel_sdvo_init], No SDVO device found on SDVOB
[    3.075526] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
[    3.076037] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.076038] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    3.076550] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.076551] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    3.076594] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
[    3.077105] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.077106] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    3.077617] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.077619] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
[    3.077631] [drm:intel_panel_get_backlight], get backlight PWM = 0
[    3.077637] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.079471] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
[    3.079477] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[    3.105551] [drm:intel_update_watermarks], plane B (pipe 1) clock: 0
[    3.105555] [drm:intel_update_fbc], 
[    3.105940] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
[    3.105941] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1
[    3.105943] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[    3.105944] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1
[    3.106363] [drm:intel_update_fbc], 
[    3.106488] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[    3.106491] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[    3.116313] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[    3.116316] [drm:intel_crt_detect], CRT not detected via hotplug
[    3.116319] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[    3.116323] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[    3.116333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[    3.116336] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1]
[    3.116850] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.116851] [drm:ironlake_dp_detect], DPCD: 0000
[    3.116852] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected
[    3.116854] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2]
[    3.116861] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected
[    3.116863] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[    3.117374] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[    3.117376] [drm:ironlake_dp_detect], DPCD: 0000
[    3.117377] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[    3.117378] No connectors reported connected with modes
[    3.117379] [drm:drm_setup_crtcs], 
[    3.117381] [drm:drm_enable_connectors], connector 5 enabled? no
[    3.117382] [drm:drm_enable_connectors], connector 8 enabled? no
[    3.117383] [drm:drm_enable_connectors], connector 10 enabled? no
[    3.117384] [drm:drm_enable_connectors], connector 14 enabled? no
[    3.117385] [drm:drm_enable_connectors], connector 16 enabled? no
[    3.117386] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[    3.117388] [drm] Cannot find any crtc or sizes - going 1024x768
[    3.120158] [drm:intelfb_create], allocated 1024x768 fb: 0x00063000, bo ffff88020c631600
[    3.120580] [drm:drm_crtc_helper_set_config], 
[    3.120581] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[    3.120585] [drm:drm_crtc_helper_set_config], 
[    3.120585] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[    3.121787] Console: switching to colour frame buffer device 128x48
[    3.122975] fb0: inteldrmfb frame buffer device
[    3.122976] drm: registered panic notifier
[    3.122984] No ACPI video bus found
[    3.123051] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.339005] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[    4.339008] PM: Marking nosave pages: 0000000020000000 - 0000000020200000
[    4.339015] PM: Marking nosave pages: 0000000040000000 - 0000000040200000
[    4.339021] PM: Marking nosave pages: 00000000da858000 - 00000000dabc9000
[    4.339031] PM: Marking nosave pages: 00000000dabca000 - 00000000dae8a000
[    4.339039] PM: Marking nosave pages: 00000000db000000 - 0000000100000000
[    4.339439] PM: Basic memory bitmaps created
[    4.367228] PM: Basic memory bitmaps freed
[    4.472329] PM: Starting manual resume from disk
[    4.472331] PM: Hibernation image partition 8:18 present
[    4.472332] PM: Looking for hibernation image.
[    4.472467] PM: Image not found (code -22)
[    4.472469] PM: Hibernation image not present or could not be loaded.
[    4.481219] device fsid 43c66fc60f997c-f4936d0fb26e8893 devid 1 transid 575701 /dev/sda5
[    9.678925] udev[383]: starting version 166
[   10.531823] iTCO_vendor_support: vendor-support=0
[   10.533047] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   10.533105] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[   10.533157] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.543673] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[   10.543675] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[   10.543699] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   10.543705] e1000e 0000:00:19.0: setting latency timer to 64
[   10.543788] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   10.573402] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   10.676850] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   10.797023] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) e0:69:95:01:f2:02
[   10.797025] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[   10.797054] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[   10.797147] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   10.797160] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.797247] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   10.797294] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   10.797313] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   10.800490] eth0 renamed to eth2 by udevd [390]
[   10.811501] udev[390]: renamed network interface eth0 to eth2
[   10.872720] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.872746] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   10.872766] sr 4:0:0:0: Attached scsi generic sg2 type 5
[   10.873962] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[   10.873966] cdrom: Uniform CD-ROM driver Revision: 3.20
[   10.874096] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   10.912263] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   10.912281] xhci_hcd 0000:03:00.0: setting latency timer to 64
[   10.912284] xhci_hcd 0000:03:00.0: xHCI Host Controller
[   10.912290] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[   10.918172] xhci_hcd 0000:03:00.0: irq 19, io mem 0xfe400000
[   10.918236] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[   10.918239] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[   10.918241] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[   10.918244] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[   10.918246] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[   10.918249] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
[   10.918252] xhci_hcd 0000:03:00.0: irq 52 for MSI/MSI-X
[   10.918254] xhci_hcd 0000:03:00.0: irq 53 for MSI/MSI-X
[   10.921485] usb usb3: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
[   10.921491] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[   10.921492] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.921493] usb usb3: Product: xHCI Host Controller
[   10.921494] usb usb3: Manufacturer: Linux 2.6.38-rc6-17-desktop xhci_hcd
[   10.921495] usb usb3: SerialNumber: 0000:03:00.0
[   10.921546] xHCI xhci_add_endpoint called for root hub
[   10.921547] xHCI xhci_check_bandwidth called for root hub
[   10.921564] hub 3-0:1.0: USB hub found
[   10.921566] hub 3-0:1.0: 4 ports detected
[   11.064283] input: QUANTA Optical Touch Screen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6
[   11.064373] quanta-touch 0003:0408:3001.0001: input,hidraw3: USB HID v1.10 Device [QUANTA Optical Touch Screen] on usb-0000:00:1a.0-1.1/input0
[   11.148970] ALSA patch_realtek.c:1530: SKU: Nid=0x1d sku_cfg=0x4006f601
[   11.148972] ALSA patch_realtek.c:1532: SKU: port_connectivity=0x1
[   11.148973] ALSA patch_realtek.c:1533: SKU: enable_pcbeep=0x0
[   11.148975] ALSA patch_realtek.c:1534: SKU: check_sum=0x00000006
[   11.148976] ALSA patch_realtek.c:1535: SKU: customization=0x000000f6
[   11.148977] ALSA patch_realtek.c:1536: SKU: external_amp=0x0
[   11.148978] ALSA patch_realtek.c:1537: SKU: platform_type=0x0
[   11.148979] ALSA patch_realtek.c:1538: SKU: swap=0x0
[   11.148980] ALSA patch_realtek.c:1539: SKU: override=0x1
[   11.149159] hda_codec: ALC892: BIOS auto-probing.
[   11.149162] ALSA hda_codec.c:4633: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0)
[   11.149163] ALSA hda_codec.c:4637:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.149165] ALSA hda_codec.c:4641:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   11.149166] ALSA hda_codec.c:4642:    mono: mono_out=0x0
[   11.149168] ALSA hda_codec.c:4645:    dig-out=0x11/0x1e
[   11.149169] ALSA hda_codec.c:4646:    inputs:
[   11.149170] ALSA hda_codec.c:4652: 
[   11.151213] ALSA patch_realtek.c:1587: realtek: No valid SSID, checking pincfg 0x4006f601 for NID 0x1d
[   11.151215] ALSA patch_realtek.c:1603: realtek: Enabling init ASM_ID=0xf601 CODEC_ID=10ec0892
[   11.154162] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   11.479362] Linux video capture interface: v2.00
[   11.566372] bttv: driver version 0.9.18 loaded
[   11.566374] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   11.566392] bttv: Bt8xx card found (0).
[   11.566405] bttv 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   11.566419] bttv0: Bt878 (rev 17) at 0000:02:02.0, irq: 18, latency: 32, mmio: 0xf0001000
[   11.566437] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[   11.566438] bttv0: using: Hauppauge (bt878) [card=10,insmod option]
[   11.566483] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
[   11.568985] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[   11.569056] bt878 #0 [sw]: Test OK
[   11.618675] tveeprom 11-0050: Hauppauge model 44354, rev C142, serial# 2294605
[   11.618677] tveeprom 11-0050: tuner model is Temic 4009FR5 (idx 42, type 20)
[   11.618678] tveeprom 11-0050: TV standards PAL(B/G) (eeprom 0x04)
[   11.618679] tveeprom 11-0050: audio processor is MSP3415 (idx 6)
[   11.618680] tveeprom 11-0050: has radio
[   11.618681] bttv0: Hauppauge eeprom indicates model#44354
[   11.618682] bttv0: tuner type=20
[   12.275979] IR NEC protocol handler initialized
[   12.380346] IR RC5(x) protocol handler initialized
[   12.455276] i2c-core: driver [msp3400] using legacy suspend method
[   12.455278] i2c-core: driver [msp3400] using legacy resume method
[   12.455731] IR RC6 protocol handler initialized
[   12.469021] IR JVC protocol handler initialized
[   12.470887] msp3400 11-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw])
[   12.470888] msp3400 11-0040: msp3400 supports nicam, mode is autodetect
[   12.483573] IR Sony protocol handler initialized
[   12.493800] i2c-core: driver [tuner] using legacy suspend method
[   12.493802] i2c-core: driver [tuner] using legacy resume method
[   12.497546] lirc_dev: IR Remote Control driver registered, major 251 
[   12.498307] IR LIRC bridge handler initialized
[   12.500297] tuner 11-0061: chip found @ 0xc2 (bt878 #0 [sw])
[   12.550683] tuner-simple 11-0061: creating new instance
[   12.550685] tuner-simple 11-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
[   12.551889] bttv0: registered device video0
[   12.551907] bttv0: registered device vbi0
[   12.551926] bttv0: registered device radio0
[   12.554766] bttv0: PLL: 28636363 => 35468950 .. ok
[   13.130709] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   13.130714] [drm:intel_crt_detect], CRT not detected via hotplug
[   13.130718] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[   13.130729] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[   13.131243] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   13.131245] [drm:ironlake_dp_detect], DPCD: 0000
[   13.131246] [drm:output_poll_execute], [CONNECTOR:10:DP-1] status updated from 2 to 2
[   13.131254] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] status updated from 2 to 2
[   13.131766] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   13.131767] [drm:ironlake_dp_detect], DPCD: 0000
[   13.131768] [drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
[   15.016958] Adding 2104508k swap on /dev/sdb2.  Priority:-1 extents:1 across:2104508k 
[   15.035668] Adding 4193276k swap on /dev/sda2.  Priority:-2 extents:1 across:4193276k 
[   16.516292] device-mapper: uevent: version 1.0.3
[   16.516343] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[   25.863693] kjournald starting.  Commit interval 15 seconds
[   25.863863] EXT3-fs (sda1): using internal journal
[   25.863869] EXT3-fs (sda1): mounted filesystem with ordered data mode
[   25.896939] kjournald starting.  Commit interval 15 seconds
[   25.897172] EXT3-fs (sdb5): using internal journal
[   25.897176] EXT3-fs (sdb5): mounted filesystem with ordered data mode
[   26.016179] REISERFS (device sdb3): found reiserfs format "3.6" with standard journal
[   26.016191] REISERFS (device sdb3): using ordered data mode
[   26.016192] reiserfs: using flush barriers
[   26.019763] REISERFS (device sdb3): journal params: device sdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   26.019955] REISERFS (device sdb3): checking transaction log (sdb3)
[   26.123867] REISERFS (device sdb3): Using r5 hash to sort names
[   26.169033] REISERFS (device sdb6): found reiserfs format "3.6" with standard journal
[   26.169045] REISERFS (device sdb6): using ordered data mode
[   26.169046] reiserfs: using flush barriers
[   26.176639] REISERFS (device sdb6): journal params: device sdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   26.176825] REISERFS (device sdb6): checking transaction log (sdb6)
[   26.207192] REISERFS (device sdb6): Using r5 hash to sort names
[   26.234844] REISERFS (device sdb7): found reiserfs format "3.6" with standard journal
[   26.234857] REISERFS (device sdb7): using ordered data mode
[   26.234859] reiserfs: using flush barriers
[   26.242680] REISERFS (device sdb7): journal params: device sdb7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   26.242865] REISERFS (device sdb7): checking transaction log (sdb7)
[   26.272903] REISERFS (device sdb7): Using r5 hash to sort names
[   26.306498] REISERFS (device sdb8): found reiserfs format "3.6" with standard journal
[   26.306512] REISERFS (device sdb8): using ordered data mode
[   26.306513] reiserfs: using flush barriers
[   26.314208] REISERFS (device sdb8): journal params: device sdb8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   26.314395] REISERFS (device sdb8): checking transaction log (sdb8)
[   26.364750] REISERFS (device sdb8): Using r5 hash to sort names
[   26.405629] REISERFS (device sdb10): found reiserfs format "3.6" with standard journal
[   26.405644] REISERFS (device sdb10): using ordered data mode
[   26.405646] reiserfs: using flush barriers
[   26.411320] REISERFS (device sdb10): journal params: device sdb10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   26.411499] REISERFS (device sdb10): checking transaction log (sdb10)
[   26.450486] REISERFS (device sdb10): Using r5 hash to sort names
[   26.482500] REISERFS (device sdb11): found reiserfs format "3.6" with standard journal
[   26.482515] REISERFS (device sdb11): using ordered data mode
[   26.482517] reiserfs: using flush barriers
[   26.490264] REISERFS (device sdb11): journal params: device sdb11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   26.490446] REISERFS (device sdb11): checking transaction log (sdb11)
[   26.539648] REISERFS (device sdb11): Using r5 hash to sort names
[   26.615203] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   26.650751] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   26.707364] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   26.714901] device fsid 4747820d8139ac1c-e87e5507e36ff49c devid 1 transid 55800 /dev/sda9
[   27.374040] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   27.431908] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[   27.466205] kjournald starting.  Commit interval 15 seconds
[   27.466380] EXT3-fs (sda12): using internal journal
[   27.466385] EXT3-fs (sda12): mounted filesystem with ordered data mode
[   30.168088] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   30.192109] ip_tables: (C) 2000-2006 Netfilter Core Team
[   30.625932] coretemp coretemp.0: TjMax is 98 C.
[   30.625997] coretemp coretemp.1: TjMax is 98 C.
[   30.626045] coretemp coretemp.2: TjMax is 98 C.
[   30.626078] coretemp coretemp.3: TjMax is 98 C.
[   36.057654] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[   41.816820] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   41.867581] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   41.867999] ADDRCONF(NETDEV_UP): eth2: link is not ready
[   43.475863] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[   43.475865] e1000e 0000:00:19.0: eth2: 10/100 speed: disabling TSO
[   43.476310] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[   44.690346] NET: Registered protocol family 17
[   50.028033] [drm:i915_driver_open], 
[   50.028053] [drm:drm_crtc_helper_set_config], 
[   50.028054] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[   50.028058] [drm:drm_crtc_helper_set_config], 
[   50.028060] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[   50.028107] [drm:i915_driver_open], 
[   50.028486] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
[   50.028489] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[5] ENCODERS[5]
[   50.028513] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   50.028514] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[   50.028518] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   50.028519] [drm:intel_crt_detect], CRT not detected via hotplug
[   50.028521] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[   50.028524] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   50.028525] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[   50.028527] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   50.028529] [drm:intel_crt_detect], CRT not detected via hotplug
[   50.028530] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[   50.028552] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[   50.028554] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[   50.028562] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[   50.028564] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[   50.028565] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[   50.028572] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[   50.028585] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   50.028586] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1]
[   50.029098] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   50.029099] [drm:ironlake_dp_detect], DPCD: 0000
[   50.029101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected
[   50.029104] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   50.029105] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1]
[   50.029617] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   50.029619] [drm:ironlake_dp_detect], DPCD: 0000
[   50.029621] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected
[   50.029653] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   50.029656] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2]
[   50.029665] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected
[   50.029668] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   50.029670] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2]
[   50.029678] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected
[   50.029699] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
[   50.029702] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[   50.030214] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   50.030216] [drm:ironlake_dp_detect], DPCD: 0000
[   50.030218] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[   50.030220] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
[   50.030222] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[   50.030733] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   50.030734] [drm:ironlake_dp_detect], DPCD: 0000
[   50.030735] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[   50.030764] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   50.030766] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[   50.030769] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   50.030770] [drm:intel_crt_detect], CRT not detected via hotplug
[   50.030771] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[   50.030773] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   50.030774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1]
[   50.030777] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   50.030778] [drm:intel_crt_detect], CRT not detected via hotplug
[   50.030779] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:VGA-1] disconnected
[   50.030796] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[   50.030797] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[   50.030805] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[   50.030807] [drm:drm_mode_getconnector], [CONNECTOR:8:?]
[   50.030808] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1]
[   50.030815] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:HDMI-A-1] disconnected
[   50.030828] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   50.030829] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1]
[   50.031341] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   50.031344] [drm:ironlake_dp_detect], DPCD: 0000
[   50.031347] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected
[   50.031350] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
[   50.031353] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1]
[   50.031865] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   50.031867] [drm:ironlake_dp_detect], DPCD: 0000
[   50.031869] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:DP-1] disconnected
[   50.031895] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   50.031896] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2]
[   50.031904] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected
[   50.031906] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
[   50.031907] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2]
[   50.031914] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-2] disconnected
[   50.031925] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
[   50.031927] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[   50.032437] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   50.032439] [drm:ironlake_dp_detect], DPCD: 0000
[   50.032440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[   50.032443] [drm:drm_mode_getconnector], [CONNECTOR:16:?]
[   50.032444] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2]
[   50.032955] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   50.032956] [drm:ironlake_dp_detect], DPCD: 0000
[   50.032957] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:DP-2] disconnected
[   50.118741] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[   50.118745] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[   54.294965] eth2: no IPv6 routers present
[   60.036567] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[   60.036572] [drm:intel_crt_detect], CRT not detected via hotplug
[   60.036576] [drm:output_poll_execute], [CONNECTOR:5:VGA-1] status updated from 2 to 2
[   60.036587] [drm:output_poll_execute], [CONNECTOR:8:HDMI-A-1] status updated from 2 to 2
[   60.037101] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   60.037103] [drm:ironlake_dp_detect], DPCD: 0000
[   60.037104] [drm:output_poll_execute], [CONNECTOR:10:DP-1] status updated from 2 to 2
[   60.037112] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-2] status updated from 2 to 2
[   60.037624] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e
[   60.037626] [drm:ironlake_dp_detect], DPCD: 0000
[   60.037629] [drm:output_poll_execute], [CONNECTOR:16:DP-2] status updated from 2 to 2
[  103.148391] [drm:drm_crtc_helper_set_config], 
[  103.148393] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[  103.148397] [drm:drm_crtc_helper_set_config], 
[  103.148398] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
