[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38.2-kape (knut@linux-iffr) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #6 PREEMPT Sun Apr 3 17:09:30 CEST 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f7f0000 (usable)
[    0.000000]  BIOS-e820: 000000007f7f0000 - 000000007f7f3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f7f3000 - 000000007f800000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.3 present.
[    0.000000] DMI:    /i915GMm-HFS, BIOS 6.00 PG 11/04/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7f7f0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-F7FFF uncachable
[    0.000000]   F8000-FBFFF write-through
[    0.000000]   FC000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F800000 mask FFF800000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped : 0 - 01000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ ffb000-1000000
[    0.000000] RAMDISK: 3768f000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 36d2e000 - 3768ed1e
[    0.000000] Move RAMDISK from 000000003768f000 - 0000000037fefd1d to 36d2e000 - 3768ed1d
[    0.000000] ACPI: RSDP 000f9320 00014 (v00 AOpen )
[    0.000000] ACPI: RSDT 7f7f3040 00038 (v01 AOpen  AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 7f7f30c0 00074 (v01 AOpen  AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 7f7f3180 042E3 (v01 AOPEN  AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 7f7f0000 00040
[    0.000000] ACPI: MCFG 7f7f7580 0003C (v01 AOpen  AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 7f7f74c0 0005A (v01 AOpen  AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: SSDT 7f7f7600 00222 (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.000000] ACPI: SSDT 7f7f7a00 000E0 (v01  PmRef    CpuPm 00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1151MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f7f0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f7f0
[    0.000000] On node 0 totalpages: 522111
[    0.000000] free_area_init_node: node 0, pgdat c06b1f7c, node_mem_map f5d3e200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2304 pages used for memmap
[    0.000000]   HighMem zone: 292594 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] nr_irqs_gsi: 40
[    0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:60800000)
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 518031
[    0.000000] Kernel command line: root=/dev/hda2 acpi_enforce_resources=lax
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f7f0)
[    0.000000] Memory: 2050032k/2088896k available (3573k kernel code, 38412k reserved, 2275k data, 340k init, 1179592k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc06b7000 - 0xc070c000   ( 340 kB)
[    0.000000]       .data : 0xc047d6df - 0xc06b6500   (2275 kB)
[    0.000000]       .text : 0xc0100000 - 0xc047d6df   (3573 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000] NR_IRQS:288
[    0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3567 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.000000] Fast TSC calibration failed
[    0.000000] TSC: PIT calibration matches PMTIMER. 1 loops
[    0.000000] Detected 1995.804 MHz processor.
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.60 BogoMIPS (lpj=7983216)
[    0.012005] pid_max: default: 32768 minimum: 301
[    0.012226] Security Framework initialized
[    0.012393] AppArmor: AppArmor initialized
[    0.012569] Mount-cache hash table entries: 512
[    0.013796] mce: CPU supports 5 MCE banks
[    0.013938] CPU0: Thermal monitoring enabled (TM1)
[    0.014084] CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
[    0.014692] ACPI: Core revision 20110112
[    0.028108] Performance Events: p6 PMU driver.
[    0.028290] ... version:                0
[    0.028423] ... bit width:              32
[    0.028554] ... generic registers:      2
[    0.028686] ... value mask:             00000000ffffffff
[    0.028822] ... max period:             000000007fffffff
[    0.028959] ... fixed-purpose events:   0
[    0.029092] ... event mask:             0000000000000003
[    0.029593] NMI watchdog enabled, takes one hw-pmu counter.
[    0.029771] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.030287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072003] devtmpfs: initialized
[    0.072003] NET: Registered protocol family 16
[    0.072003] ACPI: bus type pci registered
[    0.072003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.072003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.072003] PCI: Using MMCONFIG for extended config space
[    0.072003] PCI: Using configuration type 1 for base access
[    0.074996] bio: create slab <bio-0> at 0
[    0.079276] ACPI: EC: Look up EC in DSDT
[    0.089409] ACPI: Interpreter enabled
[    0.089542] ACPI: (supports S0 S5)
[    0.089733] ACPI: Using IOAPIC for interrupt routing
[    0.099841] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.100198] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.100741] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.100745] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.100749] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.100752] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.100756] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xfebfffff] (ignored)
[    0.100807] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600
[    0.100927] pci 0000:00:02.0: [8086:2592] type 0 class 0x000300
[    0.100944] pci 0000:00:02.0: reg 10: [mem 0xd0380000-0xd03fffff]
[    0.100955] pci 0000:00:02.0: reg 14: [io  0xe000-0xe007]
[    0.100966] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[    0.100976] pci 0000:00:02.0: reg 1c: [mem 0xd0400000-0xd043ffff]
[    0.101031] pci 0000:00:02.1: [8086:2792] type 0 class 0x000380
[    0.101047] pci 0000:00:02.1: reg 10: [mem 0xd0300000-0xd037ffff]
[    0.101178] pci 0000:00:1b.0: [8086:2668] type 0 class 0x000403
[    0.101201] pci 0000:00:1b.0: reg 10: [mem 0xd0440000-0xd0443fff 64bit]
[    0.101285] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.101291] pci 0000:00:1b.0: PME# disabled
[    0.101320] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604
[    0.101405] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.101410] pci 0000:00:1c.0: PME# disabled
[    0.101440] pci 0000:00:1c.1: [8086:2662] type 1 class 0x000604
[    0.101524] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.101530] pci 0000:00:1c.1: PME# disabled
[    0.101559] pci 0000:00:1c.2: [8086:2664] type 1 class 0x000604
[    0.101644] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.101649] pci 0000:00:1c.2: PME# disabled
[    0.101678] pci 0000:00:1c.3: [8086:2666] type 1 class 0x000604
[    0.101763] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.101769] pci 0000:00:1c.3: PME# disabled
[    0.101802] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03
[    0.101862] pci 0000:00:1d.0: reg 20: [io  0xe100-0xe11f]
[    0.101905] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03
[    0.101964] pci 0000:00:1d.1: reg 20: [io  0xe200-0xe21f]
[    0.102007] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03
[    0.102066] pci 0000:00:1d.2: reg 20: [io  0xe300-0xe31f]
[    0.102109] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03
[    0.102168] pci 0000:00:1d.3: reg 20: [io  0xe400-0xe41f]
[    0.102222] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03
[    0.102246] pci 0000:00:1d.7: reg 10: [mem 0xd0444000-0xd04443ff]
[    0.102340] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.102346] pci 0000:00:1d.7: PME# disabled
[    0.102368] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.102447] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601
[    0.102579] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.102589] pci 0000:00:1f.0: quirk: [io  0x4000-0x407f] claimed by ICH6 ACPI/GPIO/TCO
[    0.102837] pci 0000:00:1f.0: quirk: [io  0x4080-0x40bf] claimed by ICH6 GPIO
[    0.102980] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0280-02ff
[    0.103121] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 1640-164f
[    0.103279] pci 0000:00:1f.1: [8086:266f] type 0 class 0x000101
[    0.103297] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.103311] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.103324] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.103338] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.103351] pci 0000:00:1f.1: reg 20: [io  0xf000-0xf00f]
[    0.103402] pci 0000:00:1f.2: [8086:2653] type 0 class 0x000101
[    0.103423] pci 0000:00:1f.2: reg 10: [io  0xe500-0xe507]
[    0.103436] pci 0000:00:1f.2: reg 14: [io  0xe600-0xe603]
[    0.103448] pci 0000:00:1f.2: reg 18: [io  0xe700-0xe707]
[    0.103461] pci 0000:00:1f.2: reg 1c: [io  0xe800-0xe803]
[    0.103473] pci 0000:00:1f.2: reg 20: [io  0xe900-0xe90f]
[    0.103486] pci 0000:00:1f.2: reg 24: [mem 0xd0445000-0xd04453ff]
[    0.103520] pci 0000:00:1f.2: PME# supported from D3hot
[    0.103525] pci 0000:00:1f.2: PME# disabled
[    0.103544] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05
[    0.103614] pci 0000:00:1f.3: reg 20: [io  0x5000-0x501f]
[    0.103718] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.103856] pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.103862] pci 0000:00:1c.0:   bridge window [mem 0x00000000-0x000fffff] (disabled)
[    0.103872] pci 0000:00:1c.0:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
[    0.104054] pci 0000:02:00.0: [11ab:4362] type 0 class 0x000200
[    0.104086] pci 0000:02:00.0: reg 10: [mem 0xd0020000-0xd0023fff 64bit]
[    0.104103] pci 0000:02:00.0: reg 18: [io  0xc000-0xc0ff]
[    0.104161] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.104214] pci 0000:02:00.0: supports D1 D2
[    0.104217] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.104224] pci 0000:02:00.0: PME# disabled
[    0.104243] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.104596] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.104735] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
[    0.104741] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.104749] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.104853] pci 0000:03:00.0: [11ab:4362] type 0 class 0x000200
[    0.104884] pci 0000:03:00.0: reg 10: [mem 0xd0120000-0xd0123fff 64bit]
[    0.104901] pci 0000:03:00.0: reg 18: [io  0xd000-0xd0ff]
[    0.104959] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.105012] pci 0000:03:00.0: supports D1 D2
[    0.105015] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.105022] pci 0000:03:00.0: PME# disabled
[    0.105039] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.105299] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.105437] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.105443] pci 0000:00:1c.2:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.105452] pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.105513] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.105653] pci 0000:00:1c.3:   bridge window [io  0xf000-0x0000] (disabled)
[    0.105659] pci 0000:00:1c.3:   bridge window [mem 0x00000000-0x000fffff] (disabled)
[    0.105668] pci 0000:00:1c.3:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
[    0.105723] pci 0000:05:03.0: [11c1:5811] type 0 class 0x000c00
[    0.105747] pci 0000:05:03.0: reg 10: [mem 0xd0200000-0xd0200fff]
[    0.105843] pci 0000:05:03.0: supports D1 D2
[    0.105846] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[    0.105905] pci 0000:05:03.0: PME# disabled
[    0.105968] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.106112] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.106118] pci 0000:00:1e.0:   bridge window [mem 0xd0200000-0xd02fffff]
[    0.106126] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.106130] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.106134] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.106167] pci_bus 0000:00: on NUMA node 0
[    0.106173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.106583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.106685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.106785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.106886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.106985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.107377]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.132703] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.133222] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[    0.133737] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.134254] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.134771] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.135303] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.135965] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.136617] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.137478] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.137753] vgaarb: loaded
[    0.138078] SCSI subsystem initialized
[    0.138321] libata version 3.00 loaded.
[    0.138391] usbcore: registered new interface driver usbfs
[    0.138555] usbcore: registered new interface driver hub
[    0.138745] usbcore: registered new device driver usb
[    0.139045] Advanced Linux Sound Architecture Driver Version 1.0.23.
[    0.139185] PCI: Using ACPI for IRQ routing
[    0.139321] PCI: pci_cache_line_size set to 64 bytes
[    0.139470] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.139475] reserve RAM buffer: 000000007f7f0000 - 000000007fffffff 
[    0.140084] hpet clockevent registered
[    0.140090] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.140235] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.140458] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.144224] Switching to clocksource hpet
[    0.144832] AppArmor: AppArmor Filesystem Enabled
[    0.144999] pnp: PnP ACPI init
[    0.145157] ACPI: bus type pnp registered
[    0.145429] pnp 00:00: [bus 00-ff]
[    0.145433] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.145437] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.145440] pnp 00:00: [io  0x0d00-0xffff window]
[    0.145443] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.145446] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[    0.145450] pnp 00:00: [mem 0x7f800000-0xfebfffff window]
[    0.145555] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.145679] pnp 00:01: [io  0x0010-0x001f]
[    0.145682] pnp 00:01: [io  0x0022-0x003f]
[    0.145685] pnp 00:01: [io  0x0044-0x005f]
[    0.145688] pnp 00:01: [io  0x0062-0x0063]
[    0.145691] pnp 00:01: [io  0x0065-0x006f]
[    0.145694] pnp 00:01: [io  0x0074-0x007f]
[    0.145697] pnp 00:01: [io  0x0091-0x0093]
[    0.145699] pnp 00:01: [io  0x00a2-0x00bf]
[    0.145702] pnp 00:01: [io  0x00e0-0x00ef]
[    0.145705] pnp 00:01: [io  0x0b78-0x0b7b]
[    0.145708] pnp 00:01: [io  0x0f78-0x0f7b]
[    0.145711] pnp 00:01: [io  0x0a78-0x0a7b]
[    0.145714] pnp 00:01: [io  0x0e78-0x0e7b]
[    0.145716] pnp 00:01: [io  0x0bbc-0x0bbf]
[    0.145719] pnp 00:01: [io  0x0fbc-0x0fbf]
[    0.145722] pnp 00:01: [io  0x04d0-0x04d1]
[    0.145725] pnp 00:01: [io  0x0290-0x0297]
[    0.145728] pnp 00:01: [io  0x0880-0x088f]
[    0.145870] system 00:01: [io  0x0b78-0x0b7b] has been reserved
[    0.146011] system 00:01: [io  0x0f78-0x0f7b] has been reserved
[    0.146149] system 00:01: [io  0x0a78-0x0a7b] has been reserved
[    0.146289] system 00:01: [io  0x0e78-0x0e7b] has been reserved
[    0.146429] system 00:01: [io  0x0bbc-0x0bbf] has been reserved
[    0.146567] system 00:01: [io  0x0fbc-0x0fbf] has been reserved
[    0.146707] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.146845] system 00:01: [io  0x0290-0x0297] has been reserved
[    0.146985] system 00:01: [io  0x0880-0x088f] has been reserved
[    0.147127] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.147156] pnp 00:02: [dma 4]
[    0.147161] pnp 00:02: [io  0x0000-0x000f]
[    0.147164] pnp 00:02: [io  0x0080-0x0090]
[    0.147167] pnp 00:02: [io  0x0094-0x009f]
[    0.147170] pnp 00:02: [io  0x00c0-0x00df]
[    0.147227] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.147254] pnp 00:03: [io  0x0070-0x0073]
[    0.147267] pnp 00:03: [irq 8]
[    0.147325] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.147345] pnp 00:04: [io  0x0061]
[    0.147405] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.147425] pnp 00:05: [io  0x00f0-0x00ff]
[    0.147435] pnp 00:05: [irq 13]
[    0.147493] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.147865] pnp 00:06: [io  0x03f8-0x03ff]
[    0.147874] pnp 00:06: [irq 4]
[    0.147970] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.147970] Switched to NOHz mode on CPU #0
[    0.148130] pnp 00:07: [io  0x02f8-0x02ff]
[    0.148139] pnp 00:07: [irq 3]
[    0.148234] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.148732] pnp 00:08: [io  0x0378-0x037f]
[    0.148735] pnp 00:08: [io  0x0778-0x077b]
[    0.148743] pnp 00:08: [irq 7]
[    0.148840] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.149007] pnp 00:09: [io  0x0060]
[    0.149010] pnp 00:09: [io  0x0064]
[    0.149018] pnp 00:09: [irq 1]
[    0.149082] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.149154] pnp 00:0a: [io  0x4000-0x40bf]
[    0.149266] system 00:0a: [io  0x4000-0x40bf] could not be reserved
[    0.149409] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.149451] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
[    0.149519] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[    0.150011] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[    0.150153] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.150296] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.150572] pnp 00:0d: [mem 0x000d0000-0x000d3fff]
[    0.150575] pnp 00:0d: [mem 0x000db800-0x000dbfff]
[    0.150578] pnp 00:0d: [mem 0x000f0000-0x000fbfff]
[    0.150581] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[    0.150584] pnp 00:0d: [mem 0x7f7f0000-0x7f7fffff]
[    0.150587] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.150591] pnp 00:0d: [mem 0x00100000-0x7f7effff]
[    0.150594] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.150597] pnp 00:0d: [mem 0xfed13000-0xfed1dfff]
[    0.150600] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[    0.150605] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.150608] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[    0.150611] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[    0.150614] pnp 00:0d: [mem 0x000e0000-0x000effff]
[    0.150770] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.150913] system 00:0d: [mem 0x000db800-0x000dbfff] has been reserved
[    0.151053] system 00:0d: [mem 0x000f0000-0x000fbfff] could not be reserved
[    0.151196] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.151338] system 00:0d: [mem 0x7f7f0000-0x7f7fffff] could not be reserved
[    0.151481] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.151623] system 00:0d: [mem 0x00100000-0x7f7effff] could not be reserved
[    0.154692] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.154833] system 00:0d: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.154975] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.155115] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.155256] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.155397] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[    0.155539] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[    0.155681] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.155703] pnp: PnP ACPI: found 14 devices
[    0.155837] ACPI: ACPI bus type pnp unregistered
[    0.194031] pci 0000:00:1c.0: BAR 8: assigned [mem 0x80000000-0x801fffff]
[    0.194175] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.194420] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80400000-0x805fffff pref]
[    0.194665] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80600000-0x807fffff pref]
[    0.194907] pci 0000:00:1c.3: BAR 8: assigned [mem 0x80800000-0x809fffff]
[    0.195049] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.195293] pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
[    0.195434] pci 0000:00:1c.3: BAR 7: assigned [io  0x2000-0x2fff]
[    0.195572] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.195710] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.195852] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.195996] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.196253] pci 0000:02:00.0: BAR 6: assigned [mem 0x80400000-0x8041ffff pref]
[    0.196494] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.196632] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
[    0.196774] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd00fffff]
[    0.196917] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff pref]
[    0.197162] pci 0000:03:00.0: BAR 6: assigned [mem 0x80600000-0x8061ffff pref]
[    0.197405] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.197541] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.197684] pci 0000:00:1c.2:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.197826] pci 0000:00:1c.2:   bridge window [mem 0x80600000-0x807fffff pref]
[    0.198074] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.198211] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.198354] pci 0000:00:1c.3:   bridge window [mem 0x80800000-0x809fffff]
[    0.198496] pci 0000:00:1c.3:   bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.198745] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.198883] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.199026] pci 0000:00:1e.0:   bridge window [mem 0xd0200000-0xd02fffff]
[    0.199168] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.199318] pci 0000:00:1c.0: enabling device (0100 -> 0103)
[    0.199467] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.199611] pci 0000:00:1c.0: setting latency timer to 64
[    0.199624] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.199763] pci 0000:00:1c.1: setting latency timer to 64
[    0.199776] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.199915] pci 0000:00:1c.2: setting latency timer to 64
[    0.199924] pci 0000:00:1c.3: enabling device (0100 -> 0103)
[    0.200073] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.200213] pci 0000:00:1c.3: setting latency timer to 64
[    0.200223] pci 0000:00:1e.0: setting latency timer to 64
[    0.200228] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.200232] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.200235] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.200238] pci_bus 0000:01: resource 1 [mem 0x80000000-0x801fffff]
[    0.200242] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.200245] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.200249] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd00fffff]
[    0.200252] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff pref]
[    0.200255] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.200259] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.200262] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff pref]
[    0.200265] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.200268] pci_bus 0000:04: resource 1 [mem 0x80800000-0x809fffff]
[    0.200272] pci_bus 0000:04: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref]
[    0.200275] pci_bus 0000:05: resource 1 [mem 0xd0200000-0xd02fffff]
[    0.200279] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    0.200282] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
[    0.200374] NET: Registered protocol family 2
[    0.200732] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.201561] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.202954] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[    0.209849] TCP: Hash tables configured (established 131072 bind 65536)
[    0.210075] TCP reno registered
[    0.210221] UDP hash table entries: 512 (order: 3, 40960 bytes)
[    0.210471] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[    0.210982] NET: Registered protocol family 1
[    0.211172] pci 0000:00:02.0: Boot video device
[    1.808017] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    1.808204] PCI: CLS 32 bytes, default 64
[    1.808516] Unpacking initramfs...
[    2.121331] Freeing initrd memory: 9604k freed
[    2.130305] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[    2.130686] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.131184] audit: initializing netlink socket (disabled)
[    2.131383] type=2000 audit(1302179156.124:1): initialized
[    2.155236] highmem bounce pool size: 64 pages
[    2.155375] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.155777] VFS: Disk quotas dquot_6.5.2
[    2.155979] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.156752] fuse init (API version 7.16)
[    2.156999] msgmni has been set to 1718
[    2.157430] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.157692] io scheduler noop registered
[    2.157826] io scheduler deadline registered
[    2.157992] io scheduler cfq registered (default)
[    2.158390] pcieport 0000:00:1c.0: setting latency timer to 64
[    2.158488] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    2.158586] pcieport 0000:00:1c.1: setting latency timer to 64
[    2.158640] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    2.158733] pcieport 0000:00:1c.2: setting latency timer to 64
[    2.158787] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    2.158884] pcieport 0000:00:1c.3: setting latency timer to 64
[    2.158938] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    2.159393] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    2.159703] ACPI: Power Button [PWRB]
[    2.159980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.160257] ACPI: Power Button [PWRF]
[    2.160668] ACPI: Fan [FAN] (on)
[    2.160907] ACPI: acpi_idle registered with cpuidle
[    2.161103] ACPI: AOpen i915GMm-HFS detected: disabling all active thermal trip points
[    2.161348] ACPI: AOpen i915GMm-HFS detected: disabling all passive thermal trip points
[    2.161589] ACPI: AOpen i915GMm-HFS detected: enabling thermal zone polling
[    2.162617] thermal LNXTHERM:00: registered as thermal_zone0
[    2.162755] ACPI: Thermal Zone [THRM] (62 C)
[    2.163008] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
[    2.183620] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.204297] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.225908] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.246554] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    2.252124] lp: driver loaded but no devices found
[    2.252435] Non-volatile memory driver v1.3
[    2.252569] Linux agpgart interface v0.103
[    2.252814] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    2.253036] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    2.253865] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    2.254269] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    2.254508] [drm] Initialized drm 1.1.0 20060810
[    2.254667] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.254807] i915 0000:00:02.0: setting latency timer to 64
[    2.260323] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.260468] [drm] Driver supports precise vblank timestamp query.
[    3.109357] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.110124] [drm] initialized overlay support
[    3.128101] Refined TSC clocksource calibration: 1995.764 MHz.
[    3.128245] Switching to clocksource tsc
[    3.603599] Console: switching to colour frame buffer device 160x64
[    3.610089] fb0: inteldrmfb frame buffer device
[    3.610128] drm: registered panic notifier
[    3.610359] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.610842] parport_pc 00:08: reported by Plug and Play ACPI
[    3.610987] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.708482] lp0: using parport0 (interrupt-driven).
[    3.710054] loop: module loaded
[    3.710084] Uniform Multi-Platform E-IDE driver
[    3.710204] piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x04)
[    3.710276] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    3.710427] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[    3.710490]     ide0: BM-DMA at 0xf000-0xf007
[    3.710536]     ide1: BM-DMA at 0xf008-0xf00f
[    3.710578] Probing IDE interface ide0...
[    3.996210] hda: FUJITSU MHV2080AT, ATA DISK drive
[    4.668147] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    4.673023] hda: host side 80-wire cable detection failed, limiting max speed to UDMA33
[    4.673091] hda: UDMA/33 mode selected
[    4.677733] Probing IDE interface ide1...
[    5.244109] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    5.272863] ide1 at 0x170-0x177,0x376 on irq 15
[    5.273142] ide-gd driver 1.18
[    5.273255] hda: max request size: 128KiB
[    5.273424] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63
[    5.278152] hda: cache flushes supported
[    5.293518]  hda: hda1 hda2
[    5.294280] ide-cd driver 5.00
[    5.294562] ata_piix 0000:00:1f.2: version 2.13
[    5.294579] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.294644] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[    5.294805] ata_piix 0000:00:1f.2: setting latency timer to 64
[    5.295635] scsi0 : ata_piix
[    5.295959] scsi1 : ata_piix
[    5.296083] ata1: SATA max UDMA/133 cmd 0xe500 ctl 0xe600 bmdma 0xe900 irq 19
[    5.296144] ata2: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xe908 irq 19
[    5.296281] sky2: driver version 1.28
[    5.296348] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    5.296415] sky2 0000:02:00.0: setting latency timer to 64
[    5.296440] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
[    5.296622] sky2 0000:02:00.0: irq 44 for MSI/MSI-X
[    5.297629] sky2 0000:02:00.0: eth0: addr 00:01:80:62:cf:b1
[    5.297698] sky2 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    5.297764] sky2 0000:03:00.0: setting latency timer to 64
[    5.297788] sky2 0000:03:00.0: Yukon-2 EC chip revision 2
[    5.297942] sky2 0000:03:00.0: irq 45 for MSI/MSI-X
[    5.298538] sky2 0000:03:00.0: eth1: addr 00:01:80:62:cf:b2
[    5.298676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.298781] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.301308] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    5.301313] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.303782] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.310082] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    5.310100] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0444000
[    5.328013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.330464] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.332787] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.335086] usb usb1: Product: EHCI Host Controller
[    5.337396] usb usb1: Manufacturer: Linux 2.6.38.2-kape ehci_hcd
[    5.339693] usb usb1: SerialNumber: 0000:00:1d.7
[    5.342765] hub 1-0:1.0: USB hub found
[    5.345101] hub 1-0:1.0: 8 ports detected
[    5.347653] uhci_hcd: USB Universal Host Controller Interface driver
[    5.349983] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.352270] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.352275] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.354551] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.356858] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100
[    5.359204] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.361470] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.363727] usb usb2: Product: UHCI Host Controller
[    5.365963] usb usb2: Manufacturer: Linux 2.6.38.2-kape uhci_hcd
[    5.368210] usb usb2: SerialNumber: 0000:00:1d.0
[    5.370649] hub 2-0:1.0: USB hub found
[    5.372866] hub 2-0:1.0: 2 ports detected
[    5.375169] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.377398] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.377402] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.379603] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.381850] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200
[    5.384109] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.386296] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.388492] usb usb3: Product: UHCI Host Controller
[    5.390666] usb usb3: Manufacturer: Linux 2.6.38.2-kape uhci_hcd
[    5.392859] usb usb3: SerialNumber: 0000:00:1d.1
[    5.395280] hub 3-0:1.0: USB hub found
[    5.397488] hub 3-0:1.0: 2 ports detected
[    5.399742] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.401933] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.401937] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.404106] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.406347] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300
[    5.408590] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.410766] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.412958] usb usb4: Product: UHCI Host Controller
[    5.415117] usb usb4: Manufacturer: Linux 2.6.38.2-kape uhci_hcd
[    5.417325] usb usb4: SerialNumber: 0000:00:1d.2
[    5.419716] hub 4-0:1.0: USB hub found
[    5.421932] hub 4-0:1.0: 2 ports detected
[    5.424193] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    5.426377] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    5.426382] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.428570] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    5.430805] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
[    5.433059] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.435257] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.437467] usb usb5: Product: UHCI Host Controller
[    5.439680] usb usb5: Manufacturer: Linux 2.6.38.2-kape uhci_hcd
[    5.441895] usb usb5: SerialNumber: 0000:00:1d.3
[    5.444543] hub 5-0:1.0: USB hub found
[    5.446748] hub 5-0:1.0: 2 ports detected
[    5.449079] usbcore: registered new interface driver usblp
[    5.451274] Initializing USB Mass Storage driver...
[    5.453551] usbcore: registered new interface driver usb-storage
[    5.455784] USB Mass Storage support registered.
[    5.468775] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    5.471025] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    5.474186] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.487648] mousedev: PS/2 mouse device common for all mice
[    5.490713] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    5.493316] rtc_cmos 00:03: RTC can wake from S4
[    5.495894] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    5.498361] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    5.500773] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.503256] w83627hf: w83627hf: Found W83627THF chip at 0x290
[    5.505621] ACPI: resource w83627hf [io  0x0295-0x0296] conflicts with ACPI region SEN1 [io 0x295-0x296]
[    5.508052] ACPI: This conflict may cause random problems and system instability
[    5.510462] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.513472] device-mapper: uevent: version 1.0.3
[    5.516135] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    5.518710] cpuidle: using governor ladder
[    5.521506] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    5.524285] cpuidle: using governor menu
[    5.527384] usbcore: registered new interface driver usbhid
[    5.529952] usbhid: USB HID core driver
[    5.543570] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.546291] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    5.546320] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    5.579180] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[    5.585778] usbcore: registered new interface driver snd-usb-audio
[    5.588450] ALSA device list:
[    5.591118]   #0: Virtual MIDI Card 1
[    5.593770]   #1: HDA Intel at 0xd0440000 irq 46
[    5.597270] TCP cubic registered
[    5.600755] Using IPI Shortcut mode
[    5.603565] registered taskstats version 1
[    5.606686] rtc_cmos 00:03: setting system clock to 2011-04-07 12:26:00 UTC (1302179160)
[    5.609482] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[    5.612580] Freeing unused kernel memory: 340k freed
[    5.615686] Write protecting the kernel text: 3576k
[    5.618501] Write protecting the kernel read-only data: 1720k
[    5.712281] udev: starting version 157
[    5.714872] udevd (62): /proc/62/oom_adj is deprecated, please use /proc/62/oom_score_adj instead.
[    6.020113] Marking TSC unstable due to cpufreq changes
[    6.022712] Switching to clocksource hpet
[    6.340958] REISERFS (device hda2): found reiserfs format "3.6" with standard journal
[    6.343686] REISERFS (device hda2): using ordered data mode
[    6.346758] REISERFS (device hda2): journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    6.352701] REISERFS (device hda2): checking transaction log (hda2)
[    6.403950] REISERFS (device hda2): Using r5 hash to sort names
[   12.816331] udev: starting version 157
[   14.686478] Adding 4192252k swap on /dev/hda1.  Priority:-1 extents:1 across:4192252k 
[   19.055113] NET: Registered protocol family 10
[   19.216808] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   19.512897] ip_tables: (C) 2000-2006 Netfilter Core Team
[   19.692555] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   23.680436] sky2 0000:02:00.0: eth0: enabling interface
[   23.682626] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   23.794633] NET: Registered protocol family 17
[   26.043505] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
[   26.048802] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   36.904025] eth0: no IPv6 routers present
[   40.497487] SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:01:80:62:cf:b1:00:01:80:62:25:4b:08:00 SRC=192.168.22.15 DST=192.168.22.31 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=51545 DF PROTO=TCP SPT=41188 DPT=22 WINDOW=14600 RES=0x00 SYN URGP=0 OPT (020405B40402080A01039D7B0000000001030306) 
[   47.851157] SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:01:80:62:cf:b1:00:01:80:62:25:4b:08:00 SRC=192.168.22.15 DST=192.168.22.31 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=45535 DF PROTO=TCP SPT=41189 DPT=22 WINDOW=14600 RES=0x00 SYN URGP=0 OPT (020405B40402080A0103A4AA0000000001030306) 
[   58.472050] usb 2-2: new low speed USB device using uhci_hcd and address 2
[   58.646451] usb 2-2: New USB device found, idVendor=046d, idProduct=c50e
[   58.646462] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   58.646470] usb 2-2: Product: USB RECEIVER
[   58.646477] usb 2-2: Manufacturer: Logitech
[   58.675280] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[   58.678731] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-2/input0
[  126.796028] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[  126.806913] [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 2211 at 2209, next 2212)
[  133.824072] usb 2-2: USB disconnect, address 2
