[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.6 (cvarga@ikari) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Wed Oct 12 19:21:29 CEST 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003df70000 (usable) [ 0.000000] BIOS-e820: 000000003df70000 - 000000003df7a000 (ACPI data) [ 0.000000] BIOS-e820: 000000003df7a000 - 000000003df80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003df80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI present. [ 0.000000] DMI: IBM 8189KRG/IBM, BIOS 2AKT51AGR 07/06/2005 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3df70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03DF80000 mask FFFF80000 uncachable [ 0.000000] 2 base 03E000000 mask FFE000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f63f0] f63f0 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000 [ 0.000000] RAMDISK: 2dcdc000 - 2e7d4000 [ 0.000000] ACPI: RSDP 000f64a0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 3df7509c 00038 (v01 PTLTD RSDT 060400D0 LTP 00000000) [ 0.000000] ACPI: FACP 3df79e93 00074 (v01 IBM THINKCEN 060400D0 PTL 00000001) [ 0.000000] ACPI: DSDT 3df750d4 04DBF (v01 IBM THINKCEN 060400D0 MSFT 0100000E) [ 0.000000] ACPI: FACS 3df7afc0 00040 [ 0.000000] ACPI: TCPA 3df79f07 00032 (v01 IBM THINKCEN 060400D0 PTL 00000001) [ 0.000000] ACPI: APIC 3df79f39 00068 (v01 PTLTD ? APIC 060400D0 LTP 00000000) [ 0.000000] ACPI: BOOT 3df79fa1 00028 (v01 PTLTD $SBFTBL$ 060400D0 LTP 00000001) [ 0.000000] ACPI: SSDT 3df79fc9 00037 (v01 PTLTD ACPIHT 060400D0 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 103MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003df70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003df70 [ 0.000000] On node 0 totalpages: 253695 [ 0.000000] free_area_init_node: node 0, pgdat c13c4800, node_mem_map f703d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 207 pages used for memmap [ 0.000000] HighMem zone: 26275 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6c00000 s26112 r0 d23040 u2097152 [ 0.000000] pcpu-alloc: s26112 r0 d23040 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251712 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.6 root=UUID=a13b579f-2af9-418f-bf25-63e7ca8ffe07 ro [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0003df70) [ 0.000000] Memory: 989736k/1015232k available (2622k kernel code, 25044k reserved, 1263k data, 392k init, 105928k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc13cc000 - 0xc142e000 ( 392 kB) [ 0.000000] .data : 0xc128fbd2 - 0xc13cbb00 (1263 kB) [ 0.000000] .text : 0xc1000000 - 0xc128fbd2 (2622 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] CPU 0 irqstacks, hard=f6820000 soft=f6822000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2992.145 MHz processor. [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.29 BogoMIPS (lpj=11968580) [ 0.008126] pid_max: default: 32768 minimum: 301 [ 0.008270] Security Framework initialized [ 0.008332] SELinux: Disabled at boot. [ 0.008422] Mount-cache hash table entries: 512 [ 0.008812] Initializing cgroup subsys cpuacct [ 0.008894] Initializing cgroup subsys devices [ 0.008954] Initializing cgroup subsys freezer [ 0.009012] Initializing cgroup subsys net_cls [ 0.009118] CPU: Physical Processor ID: 0 [ 0.009176] CPU: Processor Core ID: 0 [ 0.009234] mce: CPU supports 4 MCE banks [ 0.009302] CPU0: Thermal monitoring enabled (TM1) [ 0.010380] ACPI: Core revision 20110413 [ 0.014846] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.015200] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.054952] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 [ 0.056003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.056003] ... version: 0 [ 0.056003] ... bit width: 40 [ 0.056003] ... generic registers: 18 [ 0.056003] ... value mask: 000000ffffffffff [ 0.056003] ... max period: 0000007fffffffff [ 0.056003] ... fixed-purpose events: 0 [ 0.056003] ... event mask: 000000000003ffff [ 0.056003] CPU 1 irqstacks, hard=f6872000 soft=f6874000 [ 0.056003] Booting Node 0, Processors #1 Ok. [ 0.056003] smpboot cpu 1: start_ip = 9b000 [ 0.012000] Initializing CPU#1 [ 0.012000] CPU1: Thermal monitoring handled by SMI [ 0.144026] Brought up 2 CPUs [ 0.144143] Total of 2 processors activated (11969.75 BogoMIPS). [ 0.144752] devtmpfs: initialized [ 0.144752] PM: Registering ACPI NVS region at 3df7a000 (24576 bytes) [ 0.144752] print_constraints: dummy: [ 0.144752] NET: Registered protocol family 16 [ 0.144752] ACPI: bus type pci registered [ 0.145210] PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3 [ 0.145273] PCI: Using configuration type 1 for base access [ 0.145794] bio: create slab at 0 [ 0.148739] ACPI: EC: Look up EC in DSDT [ 0.152254] ACPI: Interpreter enabled [ 0.152319] ACPI: (supports S0 S1 S3 S4 S5) [ 0.152587] ACPI: Using IOAPIC for interrupt routing [ 0.179356] ACPI: No dock devices found. [ 0.179421] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.180635] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.181995] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.182000] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.182004] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored) [ 0.182008] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored) [ 0.182011] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.182015] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.182018] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.182022] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) [ 0.182026] pci_root PNP0A03:00: host bridge window [mem 0x3df80000-0xfebfffff] (ignored) [ 0.182030] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.182045] pci 0000:00:00.0: [8086:2570] type 0 class 0x000600 [ 0.182051] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.182118] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref] [ 0.182173] pci 0000:00:02.0: [8086:2572] type 0 class 0x000380 [ 0.182188] pci 0000:00:02.0: reg 10: [mem 0xd8000000-0xdfffffff pref] [ 0.182197] pci 0000:00:02.0: reg 14: [mem 0xd0080000-0xd00fffff] [ 0.182205] pci 0000:00:02.0: reg 18: [io 0x1890-0x1897] [ 0.182257] pci 0000:00:06.0: [8086:2576] type 0 class 0x000880 [ 0.182268] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] [ 0.182346] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03 [ 0.182391] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f] [ 0.182425] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03 [ 0.182471] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f] [ 0.182504] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03 [ 0.182549] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f] [ 0.182583] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03 [ 0.182629] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f] [ 0.182674] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03 [ 0.182697] pci 0000:00:1d.7: reg 10: [mem 0xd0000000-0xd00003ff] [ 0.182779] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.182785] pci 0000:00:1d.7: PME# disabled [ 0.182804] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.182848] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601 [ 0.182914] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.182922] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO [ 0.183004] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH4 GPIO [ 0.183081] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101 [ 0.183095] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.183105] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.183115] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.183125] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.183135] pci 0000:00:1f.2: reg 20: [io 0x1880-0x188f] [ 0.183166] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05 [ 0.183212] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf] [ 0.183249] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401 [ 0.183266] pci 0000:00:1f.5: reg 10: [io 0x1c00-0x1cff] [ 0.183276] pci 0000:00:1f.5: reg 14: [io 0x18c0-0x18ff] [ 0.183286] pci 0000:00:1f.5: reg 18: [mem 0xd0000800-0xd00009ff] [ 0.183296] pci 0000:00:1f.5: reg 1c: [mem 0xd0000400-0xd00004ff] [ 0.183336] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.183341] pci 0000:00:1f.5: PME# disabled [ 0.183381] pci 0000:03:08.0: [8086:1050] type 0 class 0x000200 [ 0.183398] pci 0000:03:08.0: reg 10: [mem 0xd0100000-0xd0100fff] [ 0.183408] pci 0000:03:08.0: reg 14: [io 0x2000-0x203f] [ 0.183460] pci 0000:03:08.0: supports D1 D2 [ 0.183463] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.183468] pci 0000:03:08.0: PME# disabled [ 0.183489] pci 0000:03:0a.0: [4005:2302] type 0 class 0x000300 [ 0.183505] pci 0000:03:0a.0: reg 10: [mem 0xd0200000-0xd03fffff] [ 0.183562] pci 0000:03:0a.0: reg 30: [mem 0x00000000-0x00007fff pref] [ 0.183585] pci 0000:03:0c.0: [1106:3038] type 0 class 0x000c03 [ 0.183631] pci 0000:03:0c.0: reg 20: [io 0x2040-0x205f] [ 0.183663] pci 0000:03:0c.0: PME# supported from D0 D3hot D3cold [ 0.183668] pci 0000:03:0c.0: PME# disabled [ 0.183687] pci 0000:03:0c.1: [1106:3038] type 0 class 0x000c03 [ 0.183732] pci 0000:03:0c.1: reg 20: [io 0x2060-0x207f] [ 0.183765] pci 0000:03:0c.1: PME# supported from D0 D3hot D3cold [ 0.183770] pci 0000:03:0c.1: PME# disabled [ 0.183788] pci 0000:03:0c.2: [1106:3104] type 0 class 0x000c03 [ 0.183805] pci 0000:03:0c.2: reg 10: [mem 0xd0101000-0xd01010ff] [ 0.183866] pci 0000:03:0c.2: PME# supported from D0 D3hot D3cold [ 0.183871] pci 0000:03:0c.2: PME# disabled [ 0.183907] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.183976] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 0.183981] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd03fffff] [ 0.183987] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.183991] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.183995] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.184020] pci_bus 0000:00: on NUMA node 0 [ 0.184025] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.184148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT] [ 0.184304] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e) [ 0.238251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.238828] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.239399] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.239971] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.240549] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.241124] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.241696] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.242271] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.242914] vgaarb: device added: PCI:0000:03:0a.0,decodes=io+mem,owns=io+mem,locks=none [ 0.242996] vgaarb: loaded [ 0.243051] vgaarb: bridge control possible 0000:03:0a.0 [ 0.243164] PCI: Using ACPI for IRQ routing [ 0.243287] PCI: pci_cache_line_size set to 64 bytes [ 0.243377] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.243380] reserve RAM buffer: 000000003df70000 - 000000003fffffff [ 0.243615] hpet clockevent registered [ 0.243620] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.243686] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.243897] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.248044] Switching to clocksource hpet [ 0.250109] pnp: PnP ACPI init [ 0.250184] ACPI: bus type pnp registered [ 0.250988] pnp 00:00: [bus 00-ff] [ 0.250992] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.250995] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.250999] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.251002] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.251005] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.251010] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.251013] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.251016] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.251019] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.251022] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.251026] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.251029] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.251032] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.251035] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.251038] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.251041] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.251045] pnp 00:00: [mem 0x3df80000-0xfebfffff window] [ 0.251048] pnp 00:00: [io 0x0d00-0xffff window] [ 0.251051] pnp 00:00: [mem 0xfed00000-0xfed003ff window] [ 0.251121] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.251221] pnp 00:01: [io 0x0010-0x001f] [ 0.251224] pnp 00:01: [io 0x0024-0x0025] [ 0.251227] pnp 00:01: [io 0x0028-0x0029] [ 0.251229] pnp 00:01: [io 0x002c-0x002d] [ 0.251232] pnp 00:01: [io 0x002e-0x002f] [ 0.251235] pnp 00:01: [io 0x0030-0x0031] [ 0.251237] pnp 00:01: [io 0x0034-0x0035] [ 0.251240] pnp 00:01: [io 0x0038-0x0039] [ 0.251242] pnp 00:01: [io 0x003c-0x003d] [ 0.251245] pnp 00:01: [io 0x004e-0x004f] [ 0.251248] pnp 00:01: [io 0x0072-0x0077] [ 0.251250] pnp 00:01: [io 0x0080] [ 0.251253] pnp 00:01: [io 0x0090-0x009f] [ 0.251255] pnp 00:01: [io 0x00a4-0x00a5] [ 0.251258] pnp 00:01: [io 0x00a8-0x00a9] [ 0.251261] pnp 00:01: [io 0x00ac-0x00ad] [ 0.251263] pnp 00:01: [io 0x00b0-0x00b5] [ 0.251266] pnp 00:01: [io 0x00b8-0x00b9] [ 0.251268] pnp 00:01: [io 0x00bc-0x00bd] [ 0.251271] pnp 00:01: [io 0x04d0-0x04d1] [ 0.251274] pnp 00:01: [io 0x0800-0x087f] [ 0.251276] pnp 00:01: [io 0x1000-0x107f] [ 0.251279] pnp 00:01: [io 0x1100-0x111f] [ 0.251282] pnp 00:01: [io 0x1180-0x11bf] [ 0.251284] pnp 00:01: [io 0xe000-0xe00f] [ 0.251287] pnp 00:01: [io 0xfe00] [ 0.251290] pnp 00:01: [io 0xfe10-0xfe11] [ 0.251293] pnp 00:01: [mem 0xfed20000-0xfed8ffff] [ 0.251295] pnp 00:01: [mem 0xfed90000] [ 0.251383] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.251447] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.251509] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.251572] system 00:01: [io 0x1100-0x111f] has been reserved [ 0.251634] system 00:01: [io 0x1180-0x11bf] has been reserved [ 0.251696] system 00:01: [io 0xe000-0xe00f] has been reserved [ 0.251757] system 00:01: [io 0xfe00] has been reserved [ 0.251757] Switched to NOHz mode on CPU #0 [ 0.251816] system 00:01: [io 0xfe10-0xfe11] has been reserved [ 0.251882] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.251887] Switched to NOHz mode on CPU #1 [ 0.252014] system 00:01: [mem 0xfed90000] has been reserved [ 0.252077] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252094] pnp 00:02: [io 0x0000-0x000f] [ 0.252097] pnp 00:02: [io 0x0081-0x008f] [ 0.252100] pnp 00:02: [io 0x00c0-0x00df] [ 0.252103] pnp 00:02: [dma 4] [ 0.252135] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.252149] pnp 00:03: [io 0x00f0-0x00fe] [ 0.252161] pnp 00:03: [irq 13] [ 0.252193] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.252208] pnp 00:04: [io 0x0070-0x0071] [ 0.252215] pnp 00:04: [irq 8] [ 0.252247] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.252260] pnp 00:05: [io 0x0061] [ 0.252293] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.252497] pnp 00:06: [mem 0xff800000-0xffffffff] [ 0.252535] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) [ 0.252614] pnp 00:07: [io 0x0060] [ 0.252618] pnp 00:07: [io 0x0064] [ 0.252624] pnp 00:07: [irq 1] [ 0.252690] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.252754] pnp 00:08: [irq 12] [ 0.252816] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.257190] pnp 00:09: [io 0x03f0-0x03f5] [ 0.257195] pnp 00:09: [io 0x03f7] [ 0.257207] pnp 00:09: [irq 6] [ 0.257210] pnp 00:09: [dma 2] [ 0.258684] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.263078] pnp 00:0a: [io 0x03f8-0x03ff] [ 0.263092] pnp 00:0a: [irq 4] [ 0.264603] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.272469] pnp 00:0b: [io 0x0378-0x037f] [ 0.272474] pnp 00:0b: [io 0x0778-0x077f] [ 0.272486] pnp 00:0b: [irq 7] [ 0.272489] pnp 00:0b: [dma 3] [ 0.274358] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.276520] pnp: PnP ACPI: found 12 devices [ 0.276584] ACPI: ACPI bus type pnp unregistered [ 0.276645] PnPBIOS: Disabled by ACPI PNP [ 0.313345] PCI: max bus depth: 1 pci_try_num: 2 [ 0.313369] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x400fffff pref] [ 0.313449] pci 0000:03:0a.0: BAR 6: assigned [mem 0x40000000-0x40007fff pref] [ 0.313526] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.313587] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff] [ 0.313653] pci 0000:00:1e.0: bridge window [mem 0xd0100000-0xd03fffff] [ 0.313719] pci 0000:00:1e.0: bridge window [mem 0x40000000-0x400fffff pref] [ 0.313809] pci 0000:00:1e.0: setting latency timer to 64 [ 0.313814] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.313817] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.313821] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.313824] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd03fffff] [ 0.313827] pci_bus 0000:03: resource 2 [mem 0x40000000-0x400fffff pref] [ 0.313830] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.313833] pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffff] [ 0.313900] NET: Registered protocol family 2 [ 0.314059] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.314491] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.315204] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.315829] TCP: Hash tables configured (established 131072 bind 65536) [ 0.319839] TCP reno registered [ 0.319905] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.319980] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.320285] NET: Registered protocol family 1 [ 0.320579] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling [ 0.320661] pci 0000:03:0a.0: Boot video device [ 0.320702] PCI: CLS 32 bytes, default 64 [ 0.320775] Unpacking initramfs... [ 0.706315] Freeing initrd memory: 11232k freed [ 0.717630] Simple Boot Flag at 0x35 set to 0x1 [ 0.718082] audit: initializing netlink socket (disabled) [ 0.718159] type=2000 audit(1318683529.712:1): initialized [ 0.736354] highmem bounce pool size: 64 pages [ 0.736420] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.738813] VFS: Disk quotas dquot_6.5.2 [ 0.739013] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.739232] msgmni has been set to 1748 [ 0.739651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.739729] io scheduler noop registered [ 0.739787] io scheduler deadline registered [ 0.739858] io scheduler cfq registered (default) [ 0.740191] isapnp: Scanning for PnP cards... [ 1.093972] isapnp: No Plug & Play device found [ 1.094124] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.114483] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.360454] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.408143] Linux agpgart interface v0.103 [ 1.408341] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 1.408430] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable [ 1.408650] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.408847] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000 [ 1.409105] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.410877] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.410944] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.411149] mousedev: PS/2 mouse device common for all mice [ 1.411262] rtc_cmos 00:04: RTC can wake from S4 [ 1.411416] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.411499] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.411573] cpuidle: using governor ladder [ 1.411631] cpuidle: using governor menu [ 1.412092] TCP cubic registered [ 1.412346] NET: Registered protocol family 10 [ 1.413326] Mobile IPv6 [ 1.413382] NET: Registered protocol family 17 [ 1.413443] Registering the dns_resolver key type [ 1.413533] Using IPI No-Shortcut mode [ 1.413700] PM: Hibernation image not present or could not be loaded. [ 1.413716] registered taskstats version 1 [ 1.414077] rtc_cmos 00:04: setting system clock to 2011-10-15 12:58:50 UTC (1318683530) [ 1.414218] Initializing network drop monitor service [ 1.414408] Freeing unused kernel memory: 392k freed [ 1.414849] Write protecting the kernel text: 2624k [ 1.414935] Write protecting the kernel read-only data: 904k [ 1.448822] udev[47]: starting version 164 [ 1.531371] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.531438] ACPI: Thermal Zone [THM0] (57 C) [ 1.549467] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.549539] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.549705] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.576505] usbcore: registered new interface driver usbfs [ 1.576607] usbcore: registered new interface driver hub [ 1.616983] SCSI subsystem initialized [ 1.624218] usbcore: registered new device driver usb [ 1.625136] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.625263] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.625355] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.625363] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.625505] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.625633] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.629581] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.636982] e100 0000:03:08.0: PME# disabled [ 1.638506] e100 0000:03:08.0: eth0: addr 0xd0100000, irq 20, MAC addr 00:0d:60:ac:18:9d [ 1.640299] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0000000 [ 1.653985] libata version 3.00 loaded. [ 1.656197] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.656321] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.656390] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.656470] usb usb1: Product: EHCI Host Controller [ 1.656535] usb usb1: Manufacturer: Linux 3.0.6 ehci_hcd [ 1.656598] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.656923] hub 1-0:1.0: USB hub found [ 1.656994] hub 1-0:1.0: 8 ports detected [ 1.657222] ata_piix 0000:00:1f.2: version 2.13 [ 1.657228] ehci_hcd 0000:03:0c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.657265] ehci_hcd 0000:03:0c.2: EHCI Host Controller [ 1.657301] ehci_hcd 0000:03:0c.2: new USB bus registered, assigned bus number 2 [ 1.657425] ehci_hcd 0000:03:0c.2: irq 22, io mem 0xd0101000 [ 1.657516] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.657582] ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ] [ 1.668034] ehci_hcd 0000:03:0c.2: USB 2.0 started, EHCI 0.95 [ 1.668145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.668208] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.668284] usb usb2: Product: EHCI Host Controller [ 1.668343] usb usb2: Manufacturer: Linux 3.0.6 ehci_hcd [ 1.668402] usb usb2: SerialNumber: 0000:03:0c.2 [ 1.668664] hub 2-0:1.0: USB hub found [ 1.668733] hub 2-0:1.0: 4 ports detected [ 1.714965] uhci_hcd: USB Universal Host Controller Interface driver [ 1.716041] Refined TSC clocksource calibration: 2992.499 MHz. [ 1.716109] Switching to clocksource tsc [ 1.812030] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.812593] scsi0 : ata_piix [ 1.812806] scsi1 : ata_piix [ 1.813664] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14 [ 1.813729] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15 [ 1.813863] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.813945] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.813953] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.814055] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 1.814195] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 1.814326] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.814396] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.814478] usb usb3: Product: UHCI Host Controller [ 1.814543] usb usb3: Manufacturer: Linux 3.0.6 uhci_hcd [ 1.814607] usb usb3: SerialNumber: 0000:00:1d.0 [ 1.814902] hub 3-0:1.0: USB hub found [ 1.814970] hub 3-0:1.0: 2 ports detected [ 1.815153] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.815224] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.815229] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.815299] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 1.815412] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 [ 1.815514] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.815583] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.815665] usb usb4: Product: UHCI Host Controller [ 1.815725] usb usb4: Manufacturer: Linux 3.0.6 uhci_hcd [ 1.815787] usb usb4: SerialNumber: 0000:00:1d.1 [ 1.816080] hub 4-0:1.0: USB hub found [ 1.816150] hub 4-0:1.0: 2 ports detected [ 1.816311] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.816382] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.816386] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.816454] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 1.816569] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 1.816672] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.816736] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.816811] usb usb5: Product: UHCI Host Controller [ 1.816870] usb usb5: Manufacturer: Linux 3.0.6 uhci_hcd [ 1.816929] usb usb5: SerialNumber: 0000:00:1d.2 [ 1.817154] hub 5-0:1.0: USB hub found [ 1.817220] hub 5-0:1.0: 2 ports detected [ 1.817371] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.817441] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.817445] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.817512] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6 [ 1.817612] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 [ 1.817714] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.817777] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.817852] usb usb6: Product: UHCI Host Controller [ 1.817910] usb usb6: Manufacturer: Linux 3.0.6 uhci_hcd [ 1.817970] usb usb6: SerialNumber: 0000:00:1d.3 [ 1.818186] hub 6-0:1.0: USB hub found [ 1.818253] hub 6-0:1.0: 2 ports detected [ 1.818413] uhci_hcd 0000:03:0c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.818484] uhci_hcd 0000:03:0c.0: UHCI Host Controller [ 1.818552] uhci_hcd 0000:03:0c.0: new USB bus registered, assigned bus number 7 [ 1.818664] uhci_hcd 0000:03:0c.0: irq 20, io base 0x00002040 [ 1.818765] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.818829] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.818904] usb usb7: Product: UHCI Host Controller [ 1.818964] usb usb7: Manufacturer: Linux 3.0.6 uhci_hcd [ 1.819024] usb usb7: SerialNumber: 0000:03:0c.0 [ 1.819239] hub 7-0:1.0: USB hub found [ 1.819306] hub 7-0:1.0: 2 ports detected [ 1.819469] uhci_hcd 0000:03:0c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.819539] uhci_hcd 0000:03:0c.1: UHCI Host Controller [ 1.819606] uhci_hcd 0000:03:0c.1: new USB bus registered, assigned bus number 8 [ 1.819719] uhci_hcd 0000:03:0c.1: irq 21, io base 0x00002060 [ 1.819817] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.819881] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.819956] usb usb8: Product: UHCI Host Controller [ 1.823791] usb usb8: Manufacturer: Linux 3.0.6 uhci_hcd [ 1.823851] usb usb8: SerialNumber: 0000:03:0c.1 [ 1.824096] hub 8-0:1.0: USB hub found [ 1.824164] hub 8-0:1.0: 2 ports detected [ 1.976337] ata2.00: ATA-8: ST31500541AS, CC34, max UDMA/133 [ 1.976403] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.992322] ata2.00: configured for UDMA/133 [ 2.080027] usb 1-5: new high speed USB device number 3 using ehci_hcd [ 2.143904] ata1.00: ATA-7: ST3500630A, 3.AAF, max UDMA/100 [ 2.143967] ata1.00: 976773168 sectors, multi 16: LBA48 [ 2.144038] ata1.01: ATAPI: LITE-ON DVDRW SOHW-1673S, JS01, max UDMA/66 [ 2.212320] usb 1-5: New USB device found, idVendor=050d, idProduct=0234 [ 2.212386] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.213167] hub 1-5:1.0: USB hub found [ 2.213338] hub 1-5:1.0: 4 ports detected [ 2.218744] ata1.00: configured for UDMA/100 [ 2.232163] ata1.01: configured for UDMA/66 ... [ 2.334921] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.335223] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 2.342044] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.343430] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 2.344775] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 2.476061] hub 2-0:1.0: over-current condition on port 3 [ 2.684029] hub 2-0:1.0: over-current condition on port 4 [ 2.908026] usb 4-2: new full speed USB device number 2 using uhci_hcd [ 3.132306] usb 4-2: New USB device found, idVendor=041e, idProduct=4011 [ 3.132373] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.302883] device-mapper: uevent: version 1.0.3 [ 3.303462] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 3.336600] EXT3-fs: barriers not enabled [ 3.345378] kjournald starting. Commit interval 5 seconds ... [ 5.018869] udev[297]: starting version 164 [ 5.522786] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0 [ 5.522890] ACPI: Power Button [PWRB] [ 5.523082] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 5.523261] ACPI: Power Button [PWRF] [ 5.525111] ACPI: acpi_idle registered with cpuidle [ 5.553683] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 5.554426] intel_rng: Firmware space is locked read-only. If you can't or [ 5.554430] intel_rng: don't want to disable this in firmware setup, and if [ 5.554432] intel_rng: you are certain that your system has a functional [ 5.554434] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 5.708959] Linux video capture interface: v2.00 [ 5.980569] parport_pc 00:0b: reported by Plug and Play ACPI [ 5.980705] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ... [ 6.092468] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.106411] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 6.107784] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.194957] Initializing USB Mass Storage driver... [ 6.195279] scsi2 : usb-storage 8-2:1.2 [ 6.195602] usbcore: registered new interface driver usb-storage [ 6.195675] USB Mass Storage support registered. [ 6.230156] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x043D pid 0x0180 [ 6.230311] usbcore: registered new interface driver usblp [ 6.755881] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.756044] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 7.176025] intel8x0_measure_ac97_clock: measured 54710 usecs (2636 samples) [ 7.176093] intel8x0: clocking to 48000 [ 7.213061] scsi 2:0:0:0: Direct-Access Lexmark USB Mass Storage 200 PQ: 0 ANSI: 0 [ 7.214002] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 7.273077] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 7.457918] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 500 FW:808.q8.I USB FW:q8] on usb-0000:00:1d.2-2/input0 [ 7.466201] generic-usb 0003:043D:0180.0002: hiddev0,hidraw1: USB HID v1.00 Device [Lexmark S300-S400 Series] on usb-0000:03:0c.1-2/input3 [ 7.469441] input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.0/input/input4 [ 7.469785] generic-usb 0003:108B:0005.0003: input,hidraw2: USB HID v1.11 Keyboard [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:00:1d.7-5.4/input0 [ 7.477602] input: C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5.4/1-5.4:1.1/input/input5 [ 7.478292] generic-usb 0003:108B:0005.0004: input,hidraw3: USB HID v1.11 Mouse [C&C Technology Inc. HID Keyboard/Mouse PS/2 to USB Translator] on usb-0000:00:1d.7-5.4/input1 [ 7.478444] usbcore: registered new interface driver usbhid [ 7.478510] usbhid: USB HID core driver [ 9.381660] EXT3-fs (sda2): using internal journal [ 9.916302] padlock_aes: VIA PadLock not detected. [ 10.293230] loop: module loaded [ 11.150180] Adding 2008088k swap on /dev/mapper/swp. Priority:-1 extents:1 across:2008088k [ 13.716862] EXT3-fs: barriers not enabled ... [ 16.833809] Bridge firewalling registered [ 16.841067] device eth0 entered promiscuous mode [ 16.861061] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.864179] e100 0000:03:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex [ 16.864494] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.870071] br0: port 1(eth0) entering forwarding state [ 16.870139] br0: port 1(eth0) entering forwarding state [ 24.326318] RPC: Registered named UNIX socket transport module. [ 24.326402] RPC: Registered udp transport module. [ 24.326465] RPC: Registered tcp transport module. [ 24.326528] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 24.365558] FS-Cache: Loaded [ 24.396306] FS-Cache: Netfs 'nfs' registered for caching [ 24.433926] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 24.705139] fuse init (API version 7.16) [ 24.778964] ip_tables: (C) 2000-2006 Netfilter Core Team [ 24.794462] nf_conntrack version 0.5.0 (15646 buckets, 62584 max) [ 25.208513] ttyS1: LSR safety check engaged! [ 25.210361] ttyS1: LSR safety check engaged! [ 25.888017] br0: port 1(eth0) entering forwarding state [ 27.168016] br0: no IPv6 routers present [ 27.408031] eth0: no IPv6 routers present [ 28.902159] ttyS1: LSR safety check engaged! [ 36.466978] tun: Universal TUN/TAP device driver, 1.6 [ 36.467063] tun: (C) 1999-2004 Max Krasnyansky [ 36.546029] device tap0 entered promiscuous mode [ 36.551015] br0: port 2(tap0) entering forwarding state [ 36.551087] br0: port 2(tap0) entering forwarding state [ 45.568063] br0: port 2(tap0) entering forwarding state [ 46.211231] [drm] Initialized drm 1.1.0 20060810 [ 46.407565] i915 0000:00:02.0: enabling device (0000 -> 0003) [ 46.407580] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 46.407590] i915 0000:00:02.0: setting latency timer to 64 [ 46.441743] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 46.441752] [drm] Driver supports precise vblank timestamp query. [ 46.441768] i915 0000:00:02.0: BAR 6: can't assign [??? 0x00000000 flags 0x0] (bogus alignment) [ 46.441773] [drm] failed to find VBIOS tables [ 46.478281] [drm] initialized overlay support [ 46.596725] Console: switching to colour frame buffer device 160x64 [ 46.596744] fb0: inteldrmfb frame buffer device [ 46.596748] drm: registered panic notifier [ 46.596883] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 46.600849] vgaarb: this pci device is not a vga device [ 46.632236] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state [ 46.636225] render error detected, EIR: 0x00000010 [ 46.636225] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking [ 46.636225] render error detected, EIR: 0x00000010 [ 46.751125] Bluetooth: Core ver 2.16 [ 46.751171] NET: Registered protocol family 31 [ 46.751174] Bluetooth: HCI device and connection manager initialized [ 46.751179] Bluetooth: HCI socket layer initialized [ 46.902570] vgaarb: this pci device is not a vga device [ 47.472035] tap0: no IPv6 routers present [ 48.752791] lp0: using parport0 (interrupt-driven). [ 48.992239] ppdev: user-space parallel port driver [ 52.294831] svc: failed to register lockdv1 RPC service (errno 97). [ 52.294912] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 52.312328] NFSD: starting 90-second grace period [ 52.379653] powernow: This module only works with AMD K7 CPUs [ 54.743709] cpufreq-nforce2: No nForce2 chipset. [ 55.071663] ondemand governor failed, too long transition latency of HW, fallback to performance governor [ 55.072677] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available [ 55.348041] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 55.356109] render error detected, EIR: 0x00000010 [ 55.356119] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking [ 55.356131] render error detected, EIR: 0x00000010 [ 62.148049] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 62.156108] render error detected, EIR: 0x00000010 [ 62.156117] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking [ 62.156129] render error detected, EIR: 0x00000010 [ 64.148029] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung [ 64.148171] [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged! [ 64.148179] [drm:i915_reset] *ERROR* Failed to reset chip.