[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.13.0-rc8AS+ (stern@saphir.localdomain) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #1 SMP PREEMPT Mon Jan 27 21:27:12 EST 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007dd9ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007dda0000-0x000000007ddaefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ddaf000-0x000000007dddffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007dde0000-0x000000007ddfffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7dda0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable [ 0.000000] 2 base 07E000000 mask FFE000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2014MB, range: 2MB, type UC [ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC [ 0.000000] total RAM covered: 2014M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2014MB, range: 2MB, type UC [ 0.000000] reg 2, base: 2016MB, range: 32MB, type UC [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x013fffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x36400000-0x367fffff] [ 0.000000] [mem 0x36400000-0x367fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x30000000-0x363fffff] [ 0.000000] [mem 0x30000000-0x363fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x36800000-0x377fdfff] [ 0.000000] [mem 0x36800000-0x373fffff] page 2M [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x01053000, 0x01053fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36a6a000-0x3752cfff] [ 0.000000] ACPI: RSDP 000f9180 000024 (v02 110209) [ 0.000000] ACPI: XSDT 7dda0100 00008C (v01 _ASUS_ Notebook 20091102 MSFT 00000097) [ 0.000000] ACPI: FACP 7dda0290 0000F4 (v03 110209 FACP1000 20091102 MSFT 00000097) [ 0.000000] ACPI: DSDT 7dda0680 00CF1B (v01 UL20A UL20A207 00000207 INTL 20051117) [ 0.000000] ACPI: FACS 7ddaf000 000040 [ 0.000000] ACPI: APIC 7dda0390 00005C (v01 110209 APIC1000 20091102 MSFT 00000097) [ 0.000000] ACPI: MCFG 7dda0430 00003C (v01 110209 OEMMCFG 20091102 MSFT 00000097) [ 0.000000] ACPI: SLIC 7dda0470 000176 (v01 _ASUS_ Notebook 20091102 MSFT 00000097) [ 0.000000] ACPI: ECDT 7dda0620 000054 (v01 110209 OEMECDT 20091102 MSFT 00000097) [ 0.000000] ACPI: DBGP 7dda03f0 000034 (v01 110209 DBGP1000 20091102 MSFT 00000097) [ 0.000000] ACPI: BOOT 7dda05f0 000028 (v01 110209 BOOT1000 20091102 MSFT 00000097) [ 0.000000] ACPI: OEMB 7ddaf040 000071 (v01 110209 OEMB1000 20091102 MSFT 00000097) [ 0.000000] ACPI: HPET 7ddad5a0 000038 (v01 110209 OEMHPET 20091102 MSFT 00000097) [ 0.000000] ACPI: GSCI 7ddaf0c0 002024 (v01 110209 GMCHSCI 20091102 MSFT 00000097) [ 0.000000] ACPI: DMAR 7ddb10f0 000150 (v01 110209 DMAR1000 20091102 MSFT 00000097) [ 0.000000] ACPI: ATKG 7ddb1440 008024 (v01 _ASUS_ OEMATKG 20091102 MSFT 00000097) [ 0.000000] ACPI: SSDT 7ddb9f10 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1125MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x01054000, 0x01054fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0x7dd9ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x7dd9ffff] [ 0.000000] On node 0 totalpages: 515389 [ 0.000000] free_area_init_node: node 0, pgdat c0a0ae80, node_mem_map f5aaa020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2252 pages used for memmap [ 0.000000] HighMem zone: 288162 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e1000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xfed1ffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f77c3000 s30336 r0 d22912 u53248 [ 0.000000] pcpu-alloc: s30336 r0 d22912 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513613 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/test-3.x root=/dev/sda6 ro drm.debug=0xe acpi_backlight=vendor no_console_suspend rd.md=0 rd.lvm=0 rd.dm=0 vconsole.keymap=us vconsole.font=latarcyrheb-sun16 rd.luks=0 LANG=en_US.UTF-8 2 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 4123896 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007dda0) [ 0.000000] Memory: 2016636K/2061556K available (4021K kernel code, 322K rwdata, 1864K rodata, 388K init, 5980K bss, 44920K reserved, 1152648K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xffe6e000 - 0xfffff000 (1604 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0a12000 - 0xc0a73000 ( 388 kB) .data : 0xc07ed9ef - 0xc0a11900 (2191 kB) .text : 0xc0400000 - 0xc07ed9ef (4022 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f5008000 soft=f500a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3567 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] tsc: PIT calibration matches HPET. 1 loops [ 0.000000] tsc: Detected 1300.001 MHz processor [ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2600.00 BogoMIPS (lpj=5200004) [ 0.008264] pid_max: default: 32768 minimum: 301 [ 0.008542] Security Framework initialized [ 0.008675] SELinux: Initializing. [ 0.012100] SELinux: Starting in permissive mode [ 0.012134] Mount-cache hash table entries: 512 [ 0.013832] Initializing cgroup subsys memory [ 0.013995] Initializing cgroup subsys devices [ 0.014150] Initializing cgroup subsys freezer [ 0.014302] Initializing cgroup subsys blkio [ 0.014432] Initializing cgroup subsys perf_event [ 0.014647] CPU: Physical Processor ID: 0 [ 0.014775] CPU: Processor Core ID: 0 [ 0.014903] mce: CPU supports 6 MCE banks [ 0.015040] CPU0: Thermal monitoring enabled (TM2) [ 0.015187] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 tlb_flushall_shift: -1 [ 0.015739] Freeing SMP alternatives memory: 12K (c0a73000 - c0a76000) [ 0.015872] ACPI: Core revision 20131115 [ 0.040550] ACPI: All ACPI Tables successfully acquired [ 0.048229] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.048943] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.088795] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz (fam: 06, model: 17, stepping: 0a) [ 0.092000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.092000] ... version: 2 [ 0.092000] ... bit width: 40 [ 0.092000] ... generic registers: 2 [ 0.092000] ... value mask: 000000ffffffffff [ 0.092000] ... max period: 000000007fffffff [ 0.092000] ... fixed-purpose events: 3 [ 0.092000] ... event mask: 0000000700000003 [ 0.120468] CPU 1 irqstacks, hard=f50c6000 soft=f50d0000 [ 0.120473] x86: Booting SMP configuration: [ 0.012000] Initializing CPU#1 [ 0.132447] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.120603] .... node #0, CPUs: #1 [ 0.132878] x86: Booted up 1 node, 2 CPUs [ 0.133126] smpboot: Total of 2 processors activated (5200.00 BogoMIPS) [ 0.136795] devtmpfs: initialized [ 0.140397] PM: Registering ACPI NVS region [mem 0x7ddaf000-0x7dddffff] (200704 bytes) [ 0.140985] RTC time: 2:35:58, date: 01/28/14 [ 0.141506] NET: Registered protocol family 16 [ 0.142751] cpuidle: using governor ladder [ 0.142882] cpuidle: using governor menu [ 0.144463] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.144694] ACPI: bus type PCI registered [ 0.145057] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.145271] PCI: not using MMCONFIG [ 0.145658] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.145790] PCI: Using configuration type 1 for base access [ 0.151529] bio: create slab at 0 [ 0.152221] ACPI: Added _OSI(Module Device) [ 0.154402] ACPI: Added _OSI(Processor Device) [ 0.154533] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.154664] ACPI: Added _OSI(Processor Aggregator Device) [ 0.170931] ACPI : EC: EC description table is found, configuring boot EC [ 0.196350] ACPI: Executed 1 blocks of module-level executable AML code [ 0.207257] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.216443] ACPI BIOS Warning (bug): Incorrect checksum in table [ATKG] - 0x1F, should be 0x25 (20131115/tbprint-214) [ 0.217539] ACPI: SSDT 7ddb9540 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.221786] ACPI: Dynamic OEM Table Load: [ 0.222008] ACPI: SSDT (null) 0001C4 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.222709] ACPI: SSDT 7ddb97a0 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.226906] ACPI: Dynamic OEM Table Load: [ 0.227129] ACPI: SSDT (null) 000765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.228227] ACPI: SSDT 7ddb9470 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.232460] ACPI: Dynamic OEM Table Load: [ 0.232683] ACPI: SSDT (null) 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.233283] ACPI: SSDT 7ddb9710 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.237487] ACPI: Dynamic OEM Table Load: [ 0.237710] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.239070] ACPI: Interpreter enabled [ 0.239238] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580) [ 0.239549] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580) [ 0.239930] ACPI: (supports S0 S3 S4 S5) [ 0.240008] ACPI: Using IOAPIC for interrupt routing [ 0.240245] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.248201] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.248412] PCI: Using MMCONFIG for extended config space [ 0.248584] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.250097] ACPI: No dock devices found. [ 0.294951] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.295094] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI] [ 0.295692] acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control [ 0.297081] PCI host bridge to bus 0000:00 [ 0.297216] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.297350] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.297484] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.297619] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.297754] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.297890] pci_bus 0000:00: root bus resource [mem 0x7de00000-0xffffffff] [ 0.298109] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.298712] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.298752] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit] [ 0.298776] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.298794] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07] [ 0.299335] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.299369] pci 0000:00:02.1: reg 0x10: [mem 0xfe800000-0xfe8fffff 64bit] [ 0.299909] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.300014] pci 0000:00:1a.0: reg 0x20: [io 0xd880-0xd89f] [ 0.300510] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.300790] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.300907] pci 0000:00:1a.1: reg 0x20: [io 0xd800-0xd81f] [ 0.301343] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.301623] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.301740] pci 0000:00:1a.2: reg 0x20: [io 0xd480-0xd49f] [ 0.302174] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.302476] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.302529] pci 0000:00:1a.7: reg 0x10: [mem 0xfe9fbc00-0xfe9fbfff] [ 0.302757] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.303280] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.303573] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.303620] pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f4000-0xfe9f7fff 64bit] [ 0.303823] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.304098] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.304379] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.304588] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.305014] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400 [ 0.305225] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.305512] pci 0000:00:1c.5: System wakeup disabled by ACPI [ 0.305796] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.305913] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f] [ 0.306353] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.306645] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.306763] pci 0000:00:1d.1: reg 0x20: [io 0xd080-0xd09f] [ 0.307207] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.307486] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.307603] pci 0000:00:1d.2: reg 0x20: [io 0xd000-0xd01f] [ 0.308032] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.308334] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.308387] pci 0000:00:1d.7: reg 0x10: [mem 0xfe9fb800-0xfe9fbbff] [ 0.308614] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.309078] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.309356] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.309748] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.310022] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100 [ 0.310637] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.310694] pci 0000:00:1f.2: reg 0x10: [io 0xcc00-0xcc07] [ 0.310718] pci 0000:00:1f.2: reg 0x14: [io 0xc880-0xc883] [ 0.310743] pci 0000:00:1f.2: reg 0x18: [io 0xc800-0xc807] [ 0.310767] pci 0000:00:1f.2: reg 0x1c: [io 0xc480-0xc483] [ 0.310791] pci 0000:00:1f.2: reg 0x20: [io 0xc400-0xc41f] [ 0.310815] pci 0000:00:1f.2: reg 0x24: [mem 0xfe9fb000-0xfe9fb7ff] [ 0.310959] pci 0000:00:1f.2: PME# supported from D3hot [ 0.311714] pci 0000:01:00.0: [8086:0083] type 00 class 0x028000 [ 0.311886] pci 0000:01:00.0: reg 0x10: [mem 0xfeafe000-0xfeafffff 64bit] [ 0.312681] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.312963] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.313108] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.313371] pci 0000:02:00.0: [1969:1062] type 00 class 0x020000 [ 0.313424] pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit] [ 0.313453] pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f] [ 0.313686] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.313782] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.314032] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.314170] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.314182] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.314437] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.314596] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.314603] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.314610] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.314616] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.314623] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xffffffff] (subtractive decode) [ 0.314716] pci_bus 0000:00: on NUMA node 0 [ 0.319969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12) [ 0.320793] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *10 12) [ 0.321490] ACPI: PCI Interrupt Link [LNKC] (IRQs *6) [ 0.321996] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 12) [ 0.322738] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled. [ 0.323342] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 12) [ 0.324131] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 12) [ 0.324921] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12) [ 0.327734] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.327975] ACPI: \_SB_.PCI0: notify handler is installed [ 0.328363] Found 1 acpi root devices [ 0.328907] ACPI : EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62 [ 0.329515] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.329515] vgaarb: loaded [ 0.329515] vgaarb: bridge control possible 0000:00:02.0 [ 0.329515] SCSI subsystem initialized [ 0.329515] libata version 3.00 loaded. [ 0.329515] PCI: Using ACPI for IRQ routing [ 0.329515] PCI: pci_cache_line_size set to 64 bytes [ 0.329515] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.329515] e820: reserve RAM buffer [mem 0x7dda0000-0x7fffffff] [ 0.332687] cfg80211: Calling CRDA to update world regulatory domain [ 0.332902] NetLabel: Initializing [ 0.332902] NetLabel: domain hash size = 128 [ 0.332902] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.332902] NetLabel: unlabeled traffic allowed by default [ 0.332902] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.332902] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.332938] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.336112] Switched to clocksource hpet [ 0.336789] pnp: PnP ACPI init [ 0.336985] ACPI: bus type PNP registered [ 0.337294] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved [ 0.337480] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.337580] pnp 00:01: [dma 4] [ 0.337667] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.337799] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.337983] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.338224] pnp 00:04: Plug and Play ACPI device, IDs SYN0a06 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) [ 0.338333] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.338450] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.338980] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.339119] system 00:07: [io 0x0800-0x087f] could not be reserved [ 0.339255] system 00:07: [io 0x0400-0x041f] has been reserved [ 0.339390] system 00:07: [io 0x0500-0x057f] has been reserved [ 0.339526] system 00:07: [mem 0xfe9fac00-0xfe9facff window] has been reserved [ 0.339736] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.339874] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.340010] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved [ 0.340172] system 00:07: [mem 0xfed90000-0xfed90fff] has been reserved [ 0.340309] system 00:07: [mem 0xfed91000-0xfed91fff] has been reserved [ 0.341082] system 00:07: [mem 0xfed92000-0xfed92fff] has been reserved [ 0.341219] system 00:07: [mem 0xfed93000-0xfed93fff] has been reserved [ 0.341355] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved [ 0.341492] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved [ 0.341634] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.341912] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.342212] system 00:09: [mem 0xffa00000-0xffbfffff] could not be reserved [ 0.342352] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved [ 0.342495] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.342747] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.342890] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.343165] system 00:0b: [io 0x0250-0x0253] has been reserved [ 0.343301] system 00:0b: [io 0x0256-0x025f] has been reserved [ 0.343438] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.343575] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.343713] system 00:0b: [mem 0xfec10000-0xfec17fff] has been reserved [ 0.343849] system 00:0b: [mem 0xfec38000-0xfec3ffff] has been reserved [ 0.343991] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.344303] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.344446] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.345622] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.345762] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.345900] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.346038] system 00:0d: [mem 0x00100000-0x7ddfffff] could not be reserved [ 0.346180] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.346675] pnp: PnP ACPI: found 14 devices [ 0.346806] ACPI: bus type PNP unregistered [ 0.391034] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.391063] pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.391074] pci 0000:00:1c.5: BAR 9: assigned [mem 0x7de00000-0x7dffffff 64bit pref] [ 0.391284] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.391425] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.391575] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.391710] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 0.391852] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.391992] pci 0000:00:1c.5: bridge window [mem 0x7de00000-0x7dffffff 64bit pref] [ 0.392230] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.392386] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.392392] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.392398] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.392404] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.392410] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xffffffff] [ 0.392416] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.392422] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.392428] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.392434] pci_bus 0000:02: resource 2 [mem 0x7de00000-0x7dffffff 64bit pref] [ 0.392440] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.392446] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.392452] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.392458] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.392463] pci_bus 0000:03: resource 8 [mem 0x7de00000-0xffffffff] [ 0.392560] NET: Registered protocol family 2 [ 0.393436] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.393652] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.394993] TCP: Hash tables configured (established 8192 bind 8192) [ 0.395200] TCP: reno registered [ 0.395334] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.395625] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.396315] NET: Registered protocol family 1 [ 0.396477] pci 0000:00:02.0: Boot video device [ 0.396787] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.396793] pci 0000:00:1a.0: Performing full reset [ 0.397345] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.397351] pci 0000:00:1a.1: Performing full reset [ 0.397897] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.397903] pci 0000:00:1a.2: Performing full reset [ 0.399015] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.399020] pci 0000:00:1d.0: Performing full reset [ 0.399557] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.399563] pci 0000:00:1d.1: Performing full reset [ 0.400123] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.400128] pci 0000:00:1d.2: Performing full reset [ 0.400986] PCI: CLS 32 bytes, default 64 [ 0.401400] Unpacking initramfs... [ 1.027331] Freeing initrd memory: 11020K (f6a6a000 - f752d000) [ 1.050159] DMA-API: preallocated 65536 debug entries [ 1.050298] DMA-API: debugging enabled by kernel config [ 1.050752] Simple Boot Flag at 0x51 set to 0x1 [ 1.052175] Scanning for low memory corruption every 60 seconds [ 1.053336] audit: initializing netlink socket (disabled) [ 1.053541] type=2000 audit(1390876559.052:1): initialized [ 1.054540] bounce pool size: 64 pages [ 1.061016] VFS: Disk quotas dquot_6.5.2 [ 1.061295] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.063152] fuse init (API version 7.22) [ 1.063608] msgmni has been set to 1709 [ 1.064141] SELinux: Registering netfilter hooks [ 1.066450] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.066686] io scheduler noop registered [ 1.066814] io scheduler deadline registered [ 1.067090] io scheduler cfq registered (default) [ 1.067696] intel_idle: does not run on family 6 model 23 [ 1.068802] ACPI: AC Adapter [AC0] (on-line) [ 1.069244] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 1.069532] ACPI: Sleep Button [SLPB] [ 1.069860] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.078055] ACPI: Lid Switch [LID] [ 1.078357] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.078572] ACPI: Power Button [PWRF] [ 1.079659] Monitor-Mwait will be used to enter C-1 state [ 1.079875] Monitor-Mwait will be used to enter C-3 state [ 1.079905] tsc: Marking TSC unstable due to TSC halts in idle [ 1.080204] ACPI: acpi_idle registered with cpuidle [ 1.087488] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.087623] ACPI: Thermal Zone [THRM] (48 C) [ 1.087982] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.091594] Non-volatile memory driver v1.3 [ 1.091772] Linux agpgart interface v0.103 [ 1.094552] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 1.094871] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.096997] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 1.097753] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.098007] [drm] Initialized drm 1.1.0 20060810 [ 1.102120] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv, [ 1.102282] [drm:intel_detect_pch], No PCH found? [ 1.102288] [drm] Memory usable by graphics device = 2048M [ 1.102454] [drm:i915_gem_gtt_init], GMADR size = 256M [ 1.102459] [drm:i915_gem_gtt_init], GTT stolen size = 32M [ 1.103769] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7ddaf0e4 [ 1.103786] [drm:intel_opregion_setup], Public ACPI methods supported [ 1.103791] [drm:intel_opregion_setup], SWSCI supported [ 1.124244] [drm:swsci_setup], SWSCI BIOS requested (00000241) SBCB callbacks that are not supported (000000c1) [ 1.124251] [drm:swsci_setup], SWSCI GBDA callbacks 000004f3, SBCB callbacks 00000241 [ 1.124255] [drm:intel_opregion_setup], ASLE supported [ 1.124534] i915 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.124609] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.124827] [drm] Driver supports precise vblank timestamp query. [ 1.124975] [drm:init_vbt_defaults], Set default to SSC at 100000 kHz [ 1.124982] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d [ 1.124990] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0 [ 1.124995] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 1.125002] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.125010] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 71900 1366 1414 1480 1486 768 774 782 806 0x8 0xa [ 1.125016] [drm:parse_lfp_panel_data], VBT initial LVDS value 4200033c [ 1.125022] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 50 [ 1.125028] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 1.125036] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.125040] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.125046] [drm:parse_mipi], No MIPI BDB found [ 1.125072] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 1.125119] [drm:i915_gem_init_stolen], found 33554432 bytes of stolen memory at 7e000000 [ 1.125623] [drm:intel_modeset_init], 2 display pipes available. [ 1.125708] [drm:intel_modeset_init], pipe A sprite A init failed: -19 [ 1.125728] [drm:intel_modeset_init], pipe B sprite B init failed: -19 [ 1.125742] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.154276] ACPI: Battery Slot [BAT0] (battery present) [ 1.208142] [drm:intel_lvds_init], using preferred mode from EDID: [ 1.208151] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 1.208162] [drm:intel_lvds_init], detected single-link lvds configuration [ 1.208553] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 1398348/1992060, sysfs interface registered [ 1.208711] [drm:intel_dp_init_connector], Adding DP connector on port D [ 1.208818] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 1.209604] [drm:i965_irq_handler] *ERROR* pipe B underrun [ 1.211809] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064 [ 1.211825] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.214379] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x71450064 [ 1.214397] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.214497] [drm:intel_tv_init], Integrated TV is not present. [ 1.214507] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7ffff000] [ 1.218995] [drm:init_status_page], render ring hws offset: 0x00001000 [ 1.219001] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.219009] [drm:i915_pages_create_for_stolen], offset=0x0, size=131072 [ 1.219149] [drm:init_status_page], bsd ring hws offset: 0x00024000 [ 1.219154] [drm:i915_gem_object_create_stolen], creating stolen object: size=20000 [ 1.219162] [drm:i915_pages_create_for_stolen], offset=0x20000, size=131072 [ 1.219258] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled [ 1.219279] [drm:intel_modeset_readout_hw_state], [CRTC:4] hw state readout: enabled [ 1.219288] [drm:intel_modeset_readout_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B [ 1.219297] [drm:intel_modeset_readout_hw_state], [ENCODER:12:DAC-12] hw state readout: enabled, pipe B [ 1.219304] [drm:intel_modeset_readout_hw_state], [ENCODER:13:TMDS-13] hw state readout: disabled, pipe A [ 1.219311] [drm:intel_modeset_readout_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled [ 1.219318] [drm:intel_modeset_readout_hw_state], [CONNECTOR:11:VGA-1] hw state readout: enabled [ 1.219324] [drm:intel_modeset_readout_hw_state], [CONNECTOR:14:DP-1] hw state readout: disabled [ 1.219333] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A [ 1.219338] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.219343] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0 [ 1.219349] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.219355] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.219360] [drm:intel_dump_pipe_config], requested mode: [ 1.219366] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.219371] [drm:intel_dump_pipe_config], adjusted mode: [ 1.219377] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.219383] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0 [ 1.219388] [drm:intel_dump_pipe_config], port clock: 0 [ 1.219392] [drm:intel_dump_pipe_config], pipe src size: 0x0 [ 1.219398] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.219403] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.219407] [drm:intel_dump_pipe_config], ips: 0 [ 1.219412] [drm:intel_dump_pipe_config], double wide: 0 [ 1.219419] [drm:intel_dump_pipe_config], [CRTC:4][setup_hw_state] config for pipe B [ 1.219423] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.219428] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.219434] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.219441] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.219445] [drm:intel_dump_pipe_config], requested mode: [ 1.219452] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0 [ 1.219456] [drm:intel_dump_pipe_config], adjusted mode: [ 1.219462] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.219469] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa [ 1.219474] [drm:intel_dump_pipe_config], port clock: 72000 [ 1.219479] [drm:intel_dump_pipe_config], pipe src size: 640x400 [ 1.219485] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00008000 [ 1.219490] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.219494] [drm:intel_dump_pipe_config], ips: 0 [ 1.219499] [drm:intel_dump_pipe_config], double wide: 0 [ 1.219506] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 1.219513] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1] [ 1.219520] [drm:check_encoder_state], [ENCODER:6:LVDS-6] [ 1.219526] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 1.219533] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 1.219538] [drm:check_crtc_state], [CRTC:3] [ 1.219544] [drm:check_crtc_state], [CRTC:4] [ 1.219578] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 1.219584] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] [ 1.219600] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 1.219608] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 1.219613] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 1.219619] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 1.224068] [drm:intel_crt_detect], CRT not detected via hotplug [ 1.228062] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 1.228068] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.228073] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 1.228078] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 1.228441] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 1.228447] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 1.228451] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 1.228457] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 1.228463] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 1.228468] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 1.228474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected [ 1.228478] [drm:drm_setup_crtcs], [ 1.228484] [drm:drm_enable_connectors], connector 5 enabled? yes [ 1.228489] [drm:drm_enable_connectors], connector 11 enabled? no [ 1.228494] [drm:drm_enable_connectors], connector 14 enabled? no [ 1.228499] [drm:drm_target_preferred], looking for cmdline mode on connector 5 [ 1.228503] [drm:drm_target_preferred], looking for preferred mode on connector 5 [ 1.228508] [drm:drm_target_preferred], found mode 1366x768 [ 1.228513] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 1.228520] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3 [ 1.228529] [drm:intelfb_create], no BIOS fb, allocating a new one [ 1.228534] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000 [ 1.228542] [drm:i915_pages_create_for_stolen], offset=0x40000, size=4227072 [ 1.230474] [drm:intelfb_create], allocated 1366x768 fb: 0x00046000, bo f5337f00 [ 1.231170] fbcon: inteldrmfb (fb0) is primary device [ 1.233188] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 1.233193] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set [ 1.233196] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 1.233201] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 1.233207] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 1.233210] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0 [ 1.233214] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.233218] [drm:intel_modeset_stage_output_state], [CONNECTOR:11:VGA-1] to [CRTC:4] [ 1.233221] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 1.233224] [drm:intel_modeset_stage_output_state], crtc enabled, full mode switch [ 1.233229] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0 [ 1.233234] [drm:connected_sink_compute_bpp], [CONNECTOR:5:LVDS-1] checking for sink bpp constrains [ 1.233260] [drm:intel_lvds_compute_config], forcing display bpp (was 24) to LVDS (18) [ 1.233264] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1 [ 1.233268] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A [ 1.233270] [drm:intel_dump_pipe_config], cpu_transcoder: A [ 1.233273] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1 [ 1.233278] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.233282] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.233284] [drm:intel_dump_pipe_config], requested mode: [ 1.233290] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 1.233292] [drm:intel_dump_pipe_config], adjusted mode: [ 1.233297] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 1.233303] [drm:intel_dump_crtc_timings], crtc timings: 71900 1366 1414 1480 1486 768 774 782 806, type: 0x48 flags: 0xa [ 1.233305] [drm:intel_dump_pipe_config], port clock: 71900 [ 1.233308] [drm:intel_dump_pipe_config], pipe src size: 1366x768 [ 1.233312] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000 [ 1.233315] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.233318] [drm:intel_dump_pipe_config], ips: 0 [ 1.233320] [drm:intel_dump_pipe_config], double wide: 0 [ 1.233477] [drm:i9xx_set_pipeconf], disabling CxSR downclocking [ 1.233527] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5504 [ 1.233536] [drm:intel_update_fbc], no output, disabling [ 1.233544] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:0:1366x768] [ 1.234433] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6 [ 1.234438] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6 [ 1.288130] [drm:intel_update_fbc], disabled per chip default [ 1.288141] [drm:intel_panel_enable_backlight], pipe A [ 1.288170] ------------[ cut here ]------------ [ 1.288179] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/i915/intel_panel.c:714 i965_enable_backlight+0x4a/0x119() [ 1.288180] backlight already enabled [ 1.288183] Modules linked in: [ 1.288188] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc8AS+ #1 [ 1.288190] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009 [ 1.288199] 00000000 00000000 f507ba34 c07e66d6 f507ba5c f507ba4c c042c880 c068068b [ 1.288206] f6e10000 f6e84400 00000000 f507ba64 c042c8bd 00000009 f507ba5c c096322a [ 1.288214] f507ba78 f507ba88 c068068b c09631eb 000002ca c096322a e0000000 f6e11c44 [ 1.288216] Call Trace: [ 1.288222] [] dump_stack+0x48/0x69 [ 1.288228] [] warn_slowpath_common+0x5c/0x73 [ 1.288233] [] ? i965_enable_backlight+0x4a/0x119 [ 1.288237] [] warn_slowpath_fmt+0x26/0x2a [ 1.288242] [] i965_enable_backlight+0x4a/0x119 [ 1.288247] [] intel_panel_enable_backlight+0x98/0xb1 [ 1.288252] [] intel_enable_lvds+0xf0/0x10d [ 1.288256] [] i9xx_crtc_enable+0x305/0x31b [ 1.288264] [] ? gen4_write64+0x3f/0x3f [ 1.288268] [] __intel_set_mode+0xe9e/0xf60 [ 1.288273] [] intel_set_mode+0x12/0x2a [ 1.288277] [] intel_crtc_set_config+0x663/0x958 [ 1.288282] [] drm_mode_set_config_internal+0x39/0x90 [ 1.288287] [] drm_fb_helper_set_par+0x49/0x88 [ 1.288293] [] fbcon_init+0x2c9/0x3a5 [ 1.288298] [] visual_init+0x9a/0xed [ 1.288303] [] do_bind_con_driver+0x13a/0x22f [ 1.288308] [] do_take_over_console+0x108/0x130 [ 1.288313] [] do_fbcon_takeover+0x4c/0x90 [ 1.288317] [] fbcon_event_notify+0x273/0x551 [ 1.288322] [] ? __blocking_notifier_call_chain+0x1e/0x4a [ 1.288328] [] notifier_call_chain+0x25/0x46 [ 1.288332] [] __blocking_notifier_call_chain+0x32/0x4a [ 1.288336] [] blocking_notifier_call_chain+0xc/0xe [ 1.288341] [] fb_notifier_call_chain+0x11/0x16 [ 1.288346] [] register_framebuffer+0x1fe/0x251 [ 1.288351] [] drm_fb_helper_initial_config+0x31d/0x3a9 [ 1.288357] [] ? _raw_spin_unlock_irqrestore+0x33/0x49 [ 1.288363] [] intel_fbdev_initial_config+0x19/0x1b [ 1.288368] [] i915_driver_load+0x8d9/0xb0f [ 1.288374] [] drm_dev_register+0xb6/0x119 [ 1.288378] [] drm_get_pci_dev+0xe7/0x182 [ 1.288382] [] i915_pci_probe+0x39/0x42 [ 1.288388] [] pci_device_probe+0x57/0x9f [ 1.288393] [] driver_probe_device+0x7f/0x16f [ 1.288397] [] __driver_attach+0x4e/0x6a [ 1.288401] [] bus_for_each_dev+0x39/0x65 [ 1.288406] [] driver_attach+0x14/0x16 [ 1.288410] [] ? __device_attach+0x2c/0x2c [ 1.288414] [] bus_add_driver+0xb6/0x183 [ 1.288418] [] driver_register+0x6f/0xa4 [ 1.288422] [] __pci_register_driver+0x45/0x48 [ 1.288428] [] ? drm_core_init+0xe8/0xe8 [ 1.288432] [] drm_pci_init+0x51/0xc5 [ 1.288436] [] ? drm_core_init+0xe8/0xe8 [ 1.288440] [] i915_init+0x62/0x64 [ 1.288444] [] do_one_initcall+0x79/0x102 [ 1.288448] [] ? parameq+0x1c/0x20 [ 1.288452] [] ? parse_args+0x166/0x204 [ 1.288458] [] kernel_init_freeable+0x16c/0x1f6 [ 1.288463] [] kernel_init+0x8/0xda [ 1.288467] [] ret_from_kernel_thread+0x1b/0x28 [ 1.288472] [] ? rest_init+0xa1/0xa1 [ 1.288528] ---[ end trace 041fb7806a9b9805 ]--- [ 1.288532] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348 [ 1.288604] [drm:asle_work], No request on ASLC interrupt 0x00000000 [ 1.288619] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 1.288625] [drm:intel_connector_check_state], [CONNECTOR:11:VGA-1] [ 1.288631] [drm:check_encoder_state], [ENCODER:6:LVDS-6] [ 1.288635] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 1.288640] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 1.288644] [drm:check_crtc_state], [CRTC:3] [ 1.288667] [drm:check_crtc_state], [CRTC:4] [ 1.288691] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0) [ 1.288693] ------------[ cut here ]------------ [ 1.288699] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/i915/intel_display.c:9558 check_crtc_state+0x7b1/0x7f3() [ 1.288700] pipe state doesn't match! [ 1.288703] Modules linked in: [ 1.288708] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0-rc8AS+ #1 [ 1.288710] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009 [ 1.288723] 00000000 00000000 f507b890 c07e66d6 f507b8b8 f507b8a8 c042c880 c0662aea [ 1.288735] f5142000 f6df4800 00000000 f507b8c0 c042c8bd 00000009 f507b8b8 c095db4f [ 1.288747] f507b8d4 f507bb28 c0662aea c095c87c 00002556 c095db4f f6df4b90 f6df4b04 [ 1.288749] Call Trace: [ 1.288755] [] dump_stack+0x48/0x69 [ 1.288760] [] warn_slowpath_common+0x5c/0x73 [ 1.288765] [] ? check_crtc_state+0x7b1/0x7f3 [ 1.288770] [] warn_slowpath_fmt+0x26/0x2a [ 1.288775] [] check_crtc_state+0x7b1/0x7f3 [ 1.288786] [] intel_modeset_check_state+0x2fb/0x552 [ 1.288792] [] intel_set_mode+0x21/0x2a [ 1.288797] [] intel_crtc_set_config+0x663/0x958 [ 1.288803] [] drm_mode_set_config_internal+0x39/0x90 [ 1.288808] [] drm_fb_helper_set_par+0x49/0x88 [ 1.288814] [] fbcon_init+0x2c9/0x3a5 [ 1.288819] [] visual_init+0x9a/0xed [ 1.288825] [] do_bind_con_driver+0x13a/0x22f [ 1.288831] [] do_take_over_console+0x108/0x130 [ 1.288836] [] do_fbcon_takeover+0x4c/0x90 [ 1.288842] [] fbcon_event_notify+0x273/0x551 [ 1.288846] [] ? __blocking_notifier_call_chain+0x1e/0x4a [ 1.288853] [] notifier_call_chain+0x25/0x46 [ 1.288858] [] __blocking_notifier_call_chain+0x32/0x4a [ 1.288863] [] blocking_notifier_call_chain+0xc/0xe [ 1.288869] [] fb_notifier_call_chain+0x11/0x16 [ 1.288874] [] register_framebuffer+0x1fe/0x251 [ 1.288880] [] drm_fb_helper_initial_config+0x31d/0x3a9 [ 1.288886] [] ? _raw_spin_unlock_irqrestore+0x33/0x49 [ 1.288893] [] intel_fbdev_initial_config+0x19/0x1b [ 1.288898] [] i915_driver_load+0x8d9/0xb0f [ 1.288905] [] drm_dev_register+0xb6/0x119 [ 1.288910] [] drm_get_pci_dev+0xe7/0x182 [ 1.288915] [] i915_pci_probe+0x39/0x42 [ 1.288920] [] pci_device_probe+0x57/0x9f [ 1.288926] [] driver_probe_device+0x7f/0x16f [ 1.288931] [] __driver_attach+0x4e/0x6a [ 1.288936] [] bus_for_each_dev+0x39/0x65 [ 1.288941] [] driver_attach+0x14/0x16 [ 1.288946] [] ? __device_attach+0x2c/0x2c [ 1.288951] [] bus_add_driver+0xb6/0x183 [ 1.288957] [] driver_register+0x6f/0xa4 [ 1.288961] [] __pci_register_driver+0x45/0x48 [ 1.288967] [] ? drm_core_init+0xe8/0xe8 [ 1.288972] [] drm_pci_init+0x51/0xc5 [ 1.288977] [] ? drm_core_init+0xe8/0xe8 [ 1.288982] [] i915_init+0x62/0x64 [ 1.288986] [] do_one_initcall+0x79/0x102 [ 1.288991] [] ? parameq+0x1c/0x20 [ 1.288995] [] ? parse_args+0x166/0x204 [ 1.289002] [] kernel_init_freeable+0x16c/0x1f6 [ 1.289007] [] kernel_init+0x8/0xda [ 1.289012] [] ret_from_kernel_thread+0x1b/0x28 [ 1.289017] [] ? rest_init+0xa1/0xa1 [ 1.289020] ---[ end trace 041fb7806a9b9806 ]--- [ 1.289023] [drm:intel_dump_pipe_config], [CRTC:4][hw state] config for pipe B [ 1.289026] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.289029] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.289034] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.289038] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.289040] [drm:intel_dump_pipe_config], requested mode: [ 1.289045] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0 [ 1.289047] [drm:intel_dump_pipe_config], adjusted mode: [ 1.289052] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.289057] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa [ 1.289060] [drm:intel_dump_pipe_config], port clock: 72000 [ 1.289062] [drm:intel_dump_pipe_config], pipe src size: 640x400 [ 1.289066] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00000000 [ 1.289070] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.289072] [drm:intel_dump_pipe_config], ips: 0 [ 1.289075] [drm:intel_dump_pipe_config], double wide: 0 [ 1.289078] [drm:intel_dump_pipe_config], [CRTC:4][sw state] config for pipe B [ 1.289080] [drm:intel_dump_pipe_config], cpu_transcoder: B [ 1.289083] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0 [ 1.289088] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.289092] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0 [ 1.289094] [drm:intel_dump_pipe_config], requested mode: [ 1.289099] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 640 0 0 0 400 0 0 0 0x0 0x0 [ 1.289102] [drm:intel_dump_pipe_config], adjusted mode: [ 1.289106] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa [ 1.289111] [drm:intel_dump_crtc_timings], crtc timings: 72000 1366 1414 1480 1486 768 774 782 806, type: 0x0 flags: 0xa [ 1.289114] [drm:intel_dump_pipe_config], port clock: 72000 [ 1.289117] [drm:intel_dump_pipe_config], pipe src size: 640x400 [ 1.289121] [drm:intel_dump_pipe_config], gmch pfit: control: 0xa0000000, ratios: 0x0855077f, lvds border: 0x00008000 [ 1.289124] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled [ 1.289127] [drm:intel_dump_pipe_config], ips: 0 [ 1.289129] [drm:intel_dump_pipe_config], double wide: 0 [ 1.289136] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 1.289142] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 1.289146] [drm:intel_modeset_stage_output_state], [CONNECTOR:11:VGA-1] to [NOCRTC] [ 1.289148] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 1.289152] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.289155] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 1.289158] [drm:intel_modeset_stage_output_state], crtc disabled, full mode switch [ 1.289162] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 2 [ 1.304134] [drm:i9xx_pfit_disable], disabling pfit, current: 0xa0000000 [ 1.304144] [drm:g4x_check_srwm], SR watermark: display plane 56, cursor 6 [ 1.304150] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=25, cursor=6, B: plane=2, cursor=2, SR: plane=56, cursor=6 [ 1.304169] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 1.304176] [drm:check_encoder_state], [ENCODER:6:LVDS-6] [ 1.304181] [drm:check_encoder_state], [ENCODER:12:DAC-12] [ 1.304186] [drm:check_encoder_state], [ENCODER:13:TMDS-13] [ 1.304190] [drm:check_crtc_state], [CRTC:3] [ 1.304212] [drm:check_crtc_state], [CRTC:4] [ 1.304259] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 1.304265] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.304269] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.316731] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 1.316737] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.316741] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.328885] Console: switching to colour frame buffer device 170x48 [ 1.328897] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 1.328903] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 1.328907] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 1.698053] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 1.701028] i915 0000:00:02.0: registered panic notifier [ 1.704500] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.708527] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.711678] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.718808] loop: module loaded [ 1.722069] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251) [ 1.725373] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.728782] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 1.732322] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.735906] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251) [ 1.739601] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 1.743348] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 1.747465] ahci 0000:00:1f.2: version 3.0 [ 1.747930] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.748086] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 1.751896] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 1.755762] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 1.761995] scsi0 : ahci [ 1.766364] scsi1 : ahci [ 1.770444] scsi2 : ahci [ 1.774463] scsi3 : ahci [ 1.778320] ata1: SATA max UDMA/133 abar m2048@0xfe9fb000 port 0xfe9fb100 irq 41 [ 1.782075] ata2: DUMMY [ 1.785817] ata3: DUMMY [ 1.789543] ata4: DUMMY [ 1.793610] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.801580] i8042: Detected active multiplexing controller, rev 1.1 [ 1.807207] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.811562] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.815671] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.819597] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.823487] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.827638] mousedev: PS/2 mouse device common for all mice [ 1.832997] rtc_cmos 00:02: RTC can wake from S4 [ 1.837537] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.841372] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.845281] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 1.849221] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0860) [ 1.853784] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 1.857773] iTCO_vendor_support: vendor-support=0 [ 1.862156] asus_laptop: Asus Laptop Support version 0.42 [ 1.866521] asus_laptop: UL20A model detected [ 1.872496] [drm:asle_set_backlight], bclp = 0x800000b3 [ 1.872516] [drm:asle_set_backlight], updating opregion backlight 179/255 [ 1.872533] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1398348 [ 1.872599] [drm:asle_work], No request on ASLC interrupt 0x00000000 [ 1.872745] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input5 [ 1.880426] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.060981] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.066043] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.070826] TCP: cubic registered [ 2.075088] Initializing XFRM netlink socket [ 2.079339] NET: Registered protocol family 17 [ 2.083599] NET: Registered protocol family 15 [ 2.088630] Using IPI No-Shortcut mode [ 2.093694] registered taskstats version 1 [ 2.098863] Magic number: 14:311:562 [ 2.102891] rtc_cmos 00:02: setting system clock to 2014-01-28 02:36:00 UTC (1390876560) [ 2.108831] PM: Hibernation image not present or could not be loaded. [ 2.116353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.125239] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.131454] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 2.131461] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.187321] ata1.00: ATA-8: ST9250315AS, 0002SDM1, max UDMA/133 [ 2.193089] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.202652] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.208530] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 2.208537] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.214482] ata1.00: configured for UDMA/133 [ 2.219846] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0002 PQ: 0 ANSI: 5 [ 2.226490] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.226881] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.233366] sd 0:0:0:0: [sda] Write Protect is off [ 2.236859] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.236986] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.319459] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > [ 2.325779] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.329635] Freeing unused kernel memory: 388K (c0a12000 - c0a73000) [ 2.333635] Write protecting the kernel text: 4024k [ 2.337418] Write protecting the kernel read-only data: 1868k [ 2.362951] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ) [ 2.367570] systemd[1]: Running in initial RAM disk. [ 2.384648] systemd[1]: Failed to insert module 'autofs4' [ 2.388691] systemd[1]: No hostname configured. [ 2.392675] systemd[1]: Set hostname to . [ 2.397108] random: systemd urandom read with 22 bits of entropy available [ 2.401129] systemd[1]: Initializing machine ID from random generator. [ 2.431777] systemd[1]: Starting Encrypted Volumes. [ 2.440295] systemd[1]: Reached target Encrypted Volumes. [ 2.444535] systemd[1]: Starting udev Kernel Socket. [ 2.452905] systemd[1]: Listening on udev Kernel Socket. [ 2.457040] systemd[1]: Starting udev Control Socket. [ 2.465414] systemd[1]: Listening on udev Control Socket. [ 2.469306] systemd[1]: Starting Journal Socket. [ 2.477656] systemd[1]: Listening on Journal Socket. [ 2.481501] systemd[1]: Starting dracut cmdline hook... [ 2.492421] systemd[1]: Started Load Kernel Modules. [ 2.496321] systemd[1]: Starting Journal Service... [ 2.512819] systemd[1]: Started Journal Service. [ 2.519572] systemd[1]: Starting Sockets. [ 2.527539] systemd[1]: Reached target Sockets. [ 2.531310] systemd[1]: Starting Swap. [ 2.539067] systemd[1]: Reached target Swap. [ 2.542718] systemd[1]: Starting Local File Systems. [ 2.550397] systemd[1]: Reached target Local File Systems. [ 2.759096] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 2.759104] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 2.759109] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.800336] systemd-udevd[125]: starting version 197 [ 2.965248] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 600854 [ 3.008040] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13 [ 3.245184] [drm:i915_gem_open], [ 3.245477] [drm:intel_crtc_cursor_set], cursor off [ 3.245494] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 3.245503] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.245509] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.245517] [drm:intel_crtc_cursor_set], cursor off [ 3.245522] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 3.245528] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 3.245534] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.245592] [drm:i915_gem_open], [ 3.245631] [drm:intel_crtc_cursor_set], cursor off [ 3.245638] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 3.245645] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 3.245651] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.245657] [drm:intel_crtc_cursor_set], cursor off [ 3.245662] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 3.245669] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 3.245674] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.245720] [drm:i915_gem_open], [ 3.245998] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3] [ 3.246032] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[3] ENCODERS[3] [ 3.246055] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 3.246069] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 3.246074] [drm:intel_lvds_detect], [CONNECTOR:5:LVDS-1] [ 3.246093] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 3.246101] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71900 1366 1414 1480 1486 768 774 782 806 0x48 0xa [ 3.246111] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 3.263808] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 3.263822] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 3.263828] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 3.276092] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.280236] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.280244] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.280249] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3.280255] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3.280601] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.280607] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3.280611] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.280618] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 3.280635] [drm:drm_mode_getconnector], [CONNECTOR:11:?] [ 3.280642] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 3.280647] [drm:intel_crt_detect], [CONNECTOR:11:VGA-1] force=1 [ 3.288087] [drm:intel_crt_detect], CRT not detected via hotplug [ 3.292237] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 3.292245] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.292250] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 3.292255] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 3.292601] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 3.292606] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 3.292610] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found] [ 3.292617] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 3.292640] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 3.292648] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 3.292653] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 3.292660] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected [ 3.292668] [drm:drm_mode_getconnector], [CONNECTOR:14:?] [ 3.292675] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] [ 3.292679] [drm:intel_dp_detect], [CONNECTOR:14:DP-1] [ 3.292685] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:DP-1] disconnected [ 3.292962] [drm:drm_mode_addfb], [FB:19] [ 4.407336] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.802804] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.860572] random: nonblocking pool is initialized [ 5.234547] systemd-journald[64]: Received SIGTERM [ 6.947444] type=1404 audit(1390876565.340:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 7.349728] SELinux: 2048 avtab hash slots, 96503 rules. [ 7.413995] SELinux: 2048 avtab hash slots, 96503 rules. [ 7.485066] SELinux: 8 users, 83 roles, 4702 types, 269 bools, 1 sens, 1024 cats [ 7.485077] SELinux: 83 classes, 96503 rules [ 7.508900] SELinux: Completing initialization. [ 7.508905] SELinux: Setting up existing superblocks. [ 7.509107] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 7.509282] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 7.509471] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 7.509570] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 7.509955] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.510138] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 7.512494] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 7.512650] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 7.513185] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 7.513339] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 7.513482] SELinux: initialized (dev aio, type aio), not configured for labeling [ 7.513586] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 7.513803] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 7.513959] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 7.514124] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 7.518054] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 7.518103] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.518122] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.518402] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.518598] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.518663] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.518716] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.518899] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.518973] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.519006] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.519033] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.519106] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.519251] SELinux: initialized (dev sda6, type ext4), uses xattr [ 7.585689] type=1403 audit(1390876565.980:3): policy loaded auid=4294967295 ses=4294967295 [ 7.747493] systemd[1]: Successfully loaded SELinux policy in 869.605ms. [ 8.067131] systemd[1]: Relabelled /dev and /run in 51.330ms. [ 11.406226] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts [ 12.021476] systemd-journald[286]: Vacuuming done, freed 0 bytes [ 12.785478] EXT4-fs (sda6): re-mounted. Opts: (null) [ 13.249509] systemd-udevd[320]: starting version 208 [ 14.286922] ACPI: bus type USB registered [ 14.290363] usbcore: registered new interface driver usbfs [ 14.293648] usbcore: registered new interface driver hub [ 14.297462] usbcore: registered new device driver usb [ 14.320700] uhci_hcd: USB Universal Host Controller Interface driver [ 14.325215] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 14.331251] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 14.336387] ehci_hcd: block sizes: qh 80 qtd 96 itd 160 sitd 96 [ 14.338114] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 14.341811] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 14.345467] uhci_hcd 0000:00:1a.0: detected 2 ports [ 14.349189] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.349195] uhci_hcd 0000:00:1a.0: Performing full reset [ 14.349217] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 14.349368] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880 [ 14.354013] usb usb1: default language 0x0409 [ 14.354114] usb usb1: udev 1, busnum 1, minor = 0 [ 14.354121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.361440] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.364871] usb usb1: Product: UHCI Host Controller [ 14.368310] usb usb1: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.371774] usb usb1: SerialNumber: 0000:00:1a.0 [ 14.377466] usb usb1: usb_probe_device [ 14.377478] usb usb1: configuration #1 chosen from 1 choice [ 14.378263] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 14.378733] ehci-pci: EHCI PCI platform driver [ 14.381736] hub 1-0:1.0: usb_probe_interface [ 14.381740] hub 1-0:1.0: usb_probe_interface - got id [ 14.381761] hub 1-0:1.0: USB hub found [ 14.385848] hub 1-0:1.0: 2 ports detected [ 14.389317] hub 1-0:1.0: standalone hub [ 14.389328] hub 1-0:1.0: no power switching (usb 1.0) [ 14.389333] hub 1-0:1.0: individual port over-current protection [ 14.389344] hub 1-0:1.0: power on to power good time: 2ms [ 14.390045] hub 1-0:1.0: local power source is good [ 14.398814] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 14.398826] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 14.413019] usb usb1: unregistering interface 1-0:1.0 [ 14.417686] usb usb1: usb_disable_device nuking non-ep0 URBs [ 14.418217] usb usb1: bus auto-suspend, wakeup 0 [ 14.418225] usb usb1: suspend_rh [ 14.418338] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 14.422833] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2 [ 14.426575] ehci-pci 0000:00:1a.7: debug port 1 [ 14.430679] ehci-pci 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 14.430694] ehci-pci 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 14.430914] ehci-pci 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 14.435472] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 14.435805] ehci-pci 0000:00:1a.7: supports USB remote wakeup [ 14.437895] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9fbc00 [ 14.443163] ehci-pci 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 14.452153] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 14.460791] usb usb2: default language 0x0409 [ 14.460896] usb usb2: udev 1, busnum 2, minor = 128 [ 14.460903] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 14.465983] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.469936] usb usb2: Product: EHCI Host Controller [ 14.473233] usb usb2: Manufacturer: Linux 3.13.0-rc8AS+ ehci_hcd [ 14.477147] usb usb2: SerialNumber: 0000:00:1a.7 [ 14.488264] usb usb2: usb_probe_device [ 14.488277] usb usb2: configuration #1 chosen from 1 choice [ 14.488709] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 14.488983] hub 2-0:1.0: usb_probe_interface [ 14.488994] hub 2-0:1.0: usb_probe_interface - got id [ 14.489029] hub 2-0:1.0: USB hub found [ 14.494852] hub 2-0:1.0: 6 ports detected [ 14.506315] hub 2-0:1.0: standalone hub [ 14.506326] hub 2-0:1.0: no power switching (usb 1.0) [ 14.506331] hub 2-0:1.0: individual port over-current protection [ 14.506344] hub 2-0:1.0: power on to power good time: 20ms [ 14.512808] hub 2-0:1.0: local power source is good [ 14.527469] usb usb2: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 14.527481] usb usb2: usb port3's DeviceRemovable is changed to 1 according to platform information. [ 14.527491] usb usb2: usb port6's DeviceRemovable is changed to 1 according to platform information. [ 14.527497] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 14.534215] ehci-pci 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 14.534233] usb usb1: usb auto-resume [ 14.534243] usb usb1: wakeup_rh [ 14.556271] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 14.556444] hub 1-0:1.0: usb_probe_interface [ 14.556454] hub 1-0:1.0: usb_probe_interface - got id [ 14.556478] hub 1-0:1.0: USB hub found [ 14.559973] hub 1-0:1.0: 2 ports detected [ 14.566616] hub 1-0:1.0: standalone hub [ 14.566627] hub 1-0:1.0: no power switching (usb 1.0) [ 14.566632] hub 1-0:1.0: individual port over-current protection [ 14.566643] hub 1-0:1.0: power on to power good time: 2ms [ 14.567048] hub 1-0:1.0: local power source is good [ 14.572386] usb usb1: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 14.572398] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 14.573346] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 14.578113] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 14.583436] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 14.586657] Copyright(c) 2003-2013 Intel Corporation [ 14.589826] uhci_hcd 0000:00:1a.1: detected 2 ports [ 14.594359] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.594370] uhci_hcd 0000:00:1a.1: Performing full reset [ 14.594400] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 14.594481] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800 [ 14.594773] iwlwifi 0000:01:00.0: irq 42 for MSI/MSI-X [ 14.597928] usb usb3: default language 0x0409 [ 14.598030] usb usb3: udev 1, busnum 3, minor = 256 [ 14.598040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.604862] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.607948] usb usb3: Product: UHCI Host Controller [ 14.611589] usb usb3: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.616304] usb usb3: SerialNumber: 0000:00:1a.1 [ 14.625857] usb usb3: usb_probe_device [ 14.625871] usb usb3: configuration #1 chosen from 1 choice [ 14.627438] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 14.627605] hub 3-0:1.0: usb_probe_interface [ 14.627615] hub 3-0:1.0: usb_probe_interface - got id [ 14.627633] hub 3-0:1.0: USB hub found [ 14.631780] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT [ 14.631827] hub 2-0:1.0: port 3: status 0501 change 0001 [ 14.635239] atl1c 0000:02:00.0: version 1.0.1.1-NAPI [ 14.638502] hub 3-0:1.0: 2 ports detected [ 14.641862] hub 3-0:1.0: standalone hub [ 14.641872] hub 3-0:1.0: no power switching (usb 1.0) [ 14.641878] hub 3-0:1.0: individual port over-current protection [ 14.641888] hub 3-0:1.0: power on to power good time: 2ms [ 14.641971] hub 3-0:1.0: local power source is good [ 14.650221] usb usb3: usb port1's DeviceRemovable is changed to 1 according to platform information. [ 14.650233] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 14.655615] uhci_hcd 0000:00:1a.1: FS/LS companion for 0000:00:1a.7 [ 14.658137] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 14.662805] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 14.668806] ehci-pci 0000:00:1d.7: debug port 1 [ 14.671966] ehci-pci 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 14.671978] ehci-pci 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 14.672486] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 14.672902] hub 1-0:1.0: hub_suspend [ 14.673271] usb usb1: bus auto-suspend, wakeup 1 [ 14.673292] usb usb1: suspend_rh [ 14.673479] ehci-pci 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 14.677377] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 14.677386] ehci-pci 0000:00:1d.7: supports USB remote wakeup [ 14.677469] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe9fb800 [ 14.680770] ehci-pci 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 14.692115] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 14.695869] usb usb4: default language 0x0409 [ 14.695971] usb usb4: udev 1, busnum 4, minor = 384 [ 14.695982] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 14.699359] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.703342] iwlwifi 0000:01:00.0: loaded firmware version 39.31.5.1 build 35138 op_mode iwldvm [ 14.711168] usb usb4: Product: EHCI Host Controller [ 14.728025] usb usb4: Manufacturer: Linux 3.13.0-rc8AS+ ehci_hcd [ 14.731338] usb usb4: SerialNumber: 0000:00:1d.7 [ 14.734612] hub 2-0:1.0: state 7 ports 6 chg 0008 evt 0000 [ 14.734942] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 14.744141] usb usb4: usb_probe_device [ 14.744151] usb usb4: configuration #1 chosen from 1 choice [ 14.744231] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 14.744386] hub 4-0:1.0: usb_probe_interface [ 14.744393] hub 4-0:1.0: usb_probe_interface - got id [ 14.744411] hub 4-0:1.0: USB hub found [ 14.748403] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00 [ 14.752232] hub 4-0:1.0: 6 ports detected [ 14.755339] hub 4-0:1.0: standalone hub [ 14.755345] hub 4-0:1.0: no power switching (usb 1.0) [ 14.755354] hub 4-0:1.0: individual port over-current protection [ 14.755362] hub 4-0:1.0: power on to power good time: 20ms [ 14.755686] hub 4-0:1.0: local power source is good [ 14.772680] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 14.775812] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 14.775872] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 14.776799] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 14.776819] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 14.776834] uhci_hcd 0000:00:1a.2: detected 2 ports [ 14.776843] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.776846] uhci_hcd 0000:00:1a.2: Performing full reset [ 14.776865] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 14.776926] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000d480 [ 14.777131] usb usb5: default language 0x0409 [ 14.777193] usb usb5: udev 1, busnum 5, minor = 512 [ 14.777198] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.777202] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.777205] usb usb5: Product: UHCI Host Controller [ 14.777208] usb usb5: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.777212] usb usb5: SerialNumber: 0000:00:1a.2 [ 14.808063] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled [ 14.808074] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 14.808436] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 14.809019] usb usb5: usb_probe_device [ 14.809024] usb usb5: configuration #1 chosen from 1 choice [ 14.809163] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 14.809268] hub 5-0:1.0: usb_probe_interface [ 14.809272] hub 5-0:1.0: usb_probe_interface - got id [ 14.809282] hub 5-0:1.0: USB hub found [ 14.809317] hub 5-0:1.0: 2 ports detected [ 14.809320] hub 5-0:1.0: standalone hub [ 14.809323] hub 5-0:1.0: no power switching (usb 1.0) [ 14.809326] hub 5-0:1.0: individual port over-current protection [ 14.809331] hub 5-0:1.0: power on to power good time: 2ms [ 14.809378] hub 5-0:1.0: local power source is good [ 14.810940] usb usb5: usb port2's DeviceRemovable is changed to 1 according to platform information. [ 14.810943] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 14.811191] uhci_hcd 0000:00:1a.2: FS/LS companion for 0000:00:1a.7 [ 14.811520] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.811562] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 14.811575] uhci_hcd 0000:00:1d.0: detected 2 ports [ 14.811584] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.811587] uhci_hcd 0000:00:1d.0: Performing full reset [ 14.811606] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 14.811622] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 14.811815] usb usb6: default language 0x0409 [ 14.811876] usb usb6: udev 1, busnum 6, minor = 640 [ 14.811880] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.811884] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.811888] usb usb6: Product: UHCI Host Controller [ 14.811891] usb usb6: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.811894] usb usb6: SerialNumber: 0000:00:1d.0 [ 14.847702] usb usb6: usb_probe_device [ 14.847715] usb usb6: configuration #1 chosen from 1 choice [ 14.847786] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 14.847892] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 14.848003] hub 6-0:1.0: usb_probe_interface [ 14.848007] hub 6-0:1.0: usb_probe_interface - got id [ 14.848038] hub 6-0:1.0: USB hub found [ 14.848072] hub 6-0:1.0: 2 ports detected [ 14.848076] hub 6-0:1.0: standalone hub [ 14.848079] hub 6-0:1.0: no power switching (usb 1.0) [ 14.848082] hub 6-0:1.0: individual port over-current protection [ 14.848086] hub 6-0:1.0: power on to power good time: 2ms [ 14.848133] hub 6-0:1.0: local power source is good [ 14.849701] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 14.851940] uhci_hcd 0000:00:1d.0: FS/LS companion for 0000:00:1d.7 [ 14.858312] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.860567] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 14.864335] usb 2-3: new high-speed USB device number 2 using ehci-pci [ 14.877503] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 14.888585] uhci_hcd 0000:00:1d.1: detected 2 ports [ 14.892619] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.892629] uhci_hcd 0000:00:1d.1: Performing full reset [ 14.892660] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 14.892694] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080 [ 14.898591] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 14.899695] usb usb7: default language 0x0409 [ 14.899794] usb usb7: udev 1, busnum 7, minor = 768 [ 14.899805] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.903268] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.907150] usb usb7: Product: UHCI Host Controller [ 14.914763] usb usb7: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.924463] usb usb7: SerialNumber: 0000:00:1d.1 [ 14.934958] usb usb7: usb_probe_device [ 14.934968] usb usb7: configuration #1 chosen from 1 choice [ 14.935055] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 14.937991] hub 7-0:1.0: usb_probe_interface [ 14.938002] hub 7-0:1.0: usb_probe_interface - got id [ 14.938020] hub 7-0:1.0: USB hub found [ 14.942719] hub 7-0:1.0: 2 ports detected [ 14.946126] hub 7-0:1.0: standalone hub [ 14.946136] hub 7-0:1.0: no power switching (usb 1.0) [ 14.946141] hub 7-0:1.0: individual port over-current protection [ 14.946152] hub 7-0:1.0: power on to power good time: 2ms [ 14.946241] hub 7-0:1.0: local power source is good [ 14.954557] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 14.959577] uhci_hcd 0000:00:1d.1: FS/LS companion for 0000:00:1d.7 [ 14.960091] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.963460] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 14.966921] uhci_hcd 0000:00:1d.2: detected 2 ports [ 14.970290] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 14.970296] uhci_hcd 0000:00:1d.2: Performing full reset [ 14.970323] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 14.970349] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000 [ 14.973937] ehci-pci 0000:00:1a.7: port 3 reset complete, port enabled [ 14.973948] ehci-pci 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 14.974473] usb usb8: default language 0x0409 [ 14.974574] usb usb8: udev 1, busnum 8, minor = 896 [ 14.974585] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 14.977912] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 14.981270] usb usb8: Product: UHCI Host Controller [ 14.984552] usb usb8: Manufacturer: Linux 3.13.0-rc8AS+ uhci_hcd [ 14.987904] usb usb8: SerialNumber: 0000:00:1d.2 [ 14.992328] usb usb8: usb_probe_device [ 14.992339] usb usb8: configuration #1 chosen from 1 choice [ 14.992413] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 14.992566] hub 8-0:1.0: usb_probe_interface [ 14.992572] hub 8-0:1.0: usb_probe_interface - got id [ 14.992592] hub 8-0:1.0: USB hub found [ 14.995911] hub 8-0:1.0: 2 ports detected [ 15.001661] hub 8-0:1.0: standalone hub [ 15.001672] hub 8-0:1.0: no power switching (usb 1.0) [ 15.001677] hub 8-0:1.0: individual port over-current protection [ 15.001689] hub 8-0:1.0: power on to power good time: 2ms [ 15.001780] hub 8-0:1.0: local power source is good [ 15.004462] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 15.004885] uhci_hcd 0000:00:1d.2: FS/LS companion for 0000:00:1d.7 [ 15.094004] usb 2-3: skipped 1 descriptor after configuration [ 15.094016] usb 2-3: skipped 6 descriptors after interface [ 15.094023] usb 2-3: skipped 1 descriptor after endpoint [ 15.094032] usb 2-3: skipped 8 descriptors after interface [ 15.094731] usb 2-3: default language 0x0409 [ 15.100731] usb 2-3: udev 2, busnum 2, minor = 129 [ 15.100743] usb 2-3: New USB device found, idVendor=04f2, idProduct=b036 [ 15.104226] usb 2-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 15.107605] usb 2-3: Product: USB2.0 0.3M UVC WebCam [ 15.110997] usb 2-3: Manufacturer: Chicony Electronics Co., Ltd. [ 15.114380] usb 2-3: SerialNumber: SN0001 [ 15.118903] usb 2-3: usb_probe_device [ 15.118911] usb 2-3: configuration #1 chosen from 1 choice [ 15.119511] usb 2-3: adding 2-3:1.0 (config #1, interface 0) [ 15.126874] usb 2-3: adding 2-3:1.1 (config #1, interface 1) [ 15.127169] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.127207] hub 3-0:1.0: hub_suspend [ 15.127237] usb usb3: bus auto-suspend, wakeup 1 [ 15.127248] usb usb3: suspend_rh [ 15.127309] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 15.127338] hub 4-0:1.0: hub_suspend [ 15.127612] usb usb4: bus auto-suspend, wakeup 1 [ 15.127622] ehci-pci 0000:00:1d.7: suspend root hub [ 15.127740] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.127769] hub 5-0:1.0: hub_suspend [ 15.127933] usb usb5: bus auto-suspend, wakeup 1 [ 15.127943] usb usb5: suspend_rh [ 15.127996] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.128025] hub 6-0:1.0: hub_suspend [ 15.128077] usb usb6: bus auto-suspend, wakeup 1 [ 15.128088] usb usb6: suspend_rh [ 15.129792] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.129829] hub 7-0:1.0: hub_suspend [ 15.129874] usb usb7: bus auto-suspend, wakeup 1 [ 15.129884] usb usb7: suspend_rh [ 15.132578] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 15.132617] hub 8-0:1.0: hub_suspend [ 15.132663] usb usb8: bus auto-suspend, wakeup 1 [ 15.132674] usb usb8: suspend_rh [ 15.178141] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 15.318958] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 [ 15.322732] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 [ 15.335923] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 15.339465] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 [ 15.343461] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 [ 15.379799] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 15.515904] irq 16: nobody cared (try booting with the "irqpoll" option) [ 15.519245] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 3.13.0-rc8AS+ #1 [ 15.519898] Hardware name: ASUSTeK Computer Inc. UL20A /UL20A , BIOS 207 11/02/2009 [ 15.519898] 00000000 00000000 f50c7f84 c07e66d6 f514b600 f50c7f98 c04675c7 f514b600 [ 15.519898] 00000000 00000010 f50c7fb4 c0467936 2e4e7069 fffeea2f f514b600 00000010 [ 15.519898] 00000000 f50c7fd4 c0466052 00000000 00000000 00000000 f514b600 f514b654 [ 15.519898] Call Trace: [ 15.519898] [] dump_stack+0x48/0x69 [ 15.519898] [] __report_bad_irq+0x14/0x9e [ 15.519898] [] note_interrupt+0x137/0x1b5 [ 15.519898] [] handle_irq_event_percpu+0xc5/0x107 [ 15.519898] [] handle_irq_event+0x2c/0x44 [ 15.519898] [] ? handle_edge_irq+0xa9/0xa9 [ 15.519898] [] handle_fasteoi_irq+0x6a/0x97 [ 15.519898] [] ? do_IRQ+0x35/0x80 [ 15.519898] [] ? common_interrupt+0x38/0x3d [ 15.519898] [] ? enqueue_entity+0xb9/0x479 [ 15.519898] [] ? cpuidle_enter_state+0x42/0xa7 [ 15.519898] [] ? cpuidle_idle_call+0xa9/0xe6 [ 15.519898] [] ? ladder_select_state+0x184/0x184 [ 15.519898] [] ? arch_cpu_idle+0x8/0x1c [ 15.519898] [] ? cpu_startup_entry+0xd9/0x144 [ 15.519898] [] ? start_secondary+0x1d8/0x1dd [ 15.519898] handlers: [ 15.519898] [] usb_hcd_irq [usbcore] [ 15.519898] Disabling IRQ #16 [ 16.862939] Adding 8389624k swap on /dev/sda7. Priority:-1 extents:1 across:8389624k [ 17.070709] SELinux: initialized (dev sda5, type vfat), uses genfs_contexts [ 17.203174] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 17.206911] SELinux: initialized (dev sda8, type ext4), uses xattr [ 17.289693] systemd-journald[286]: Received request to flush runtime journal from PID 1 [ 25.247481] atl1c 0000:02:00.0: irq 43 for MSI/MSI-X [ 25.297893] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 25.315104] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 25.346174] uhci_hcd 0000:00:1a.0: uhci_pci_suspend [ 25.346611] uhci_hcd 0000:00:1a.0: hcd_pci_runtime_suspend: 0 [ 25.346986] uhci_hcd 0000:00:1a.1: uhci_pci_suspend [ 25.347337] uhci_hcd 0000:00:1a.1: hcd_pci_runtime_suspend: 0 [ 25.347723] uhci_hcd 0000:00:1a.2: uhci_pci_suspend [ 25.348190] uhci_hcd 0000:00:1a.2: hcd_pci_runtime_suspend: 0 [ 25.348665] uhci_hcd 0000:00:1d.0: uhci_pci_suspend [ 25.349015] uhci_hcd 0000:00:1d.0: hcd_pci_runtime_suspend: 0 [ 25.350290] uhci_hcd 0000:00:1d.1: uhci_pci_suspend [ 25.350645] uhci_hcd 0000:00:1d.1: hcd_pci_runtime_suspend: 0 [ 25.351610] uhci_hcd 0000:00:1d.2: uhci_pci_suspend [ 25.351963] uhci_hcd 0000:00:1d.2: hcd_pci_runtime_suspend: 0 [ 25.353079] ehci-pci 0000:00:1d.7: hcd_pci_runtime_suspend: 0 [ 25.386489] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 25.396665] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 25.692592] [drm:intel_crtc_cursor_set], cursor off [ 25.692607] [drm:intel_crtc_set_config], [CRTC:3] [FB:18] #connectors=1 (x y) (0 0) [ 25.692617] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0 [ 25.692624] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 25.692631] [drm:intel_crtc_cursor_set], cursor off [ 25.692637] [drm:intel_crtc_set_config], [CRTC:4] [NOFB] [ 25.692644] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:4], mode_changed=0, fb_changed=0 [ 25.692650] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 27.222755] wlan0: authenticate with 00:13:46:48:f3:2a [ 27.240810] wlan0: send auth to 00:13:46:48:f3:2a (try 1/3) [ 27.261122] wlan0: authenticated [ 27.266640] iwlwifi 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 27.271118] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 27.275546] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 27.280986] wlan0: associate with 00:13:46:48:f3:2a (try 1/3) [ 27.296925] wlan0: RX AssocResp from 00:13:46:48:f3:2a (capab=0x431 status=0 aid=6) [ 27.315616] wlan0: associated [ 57.744899] type=1006 audit(1390876616.137:4): pid=486 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1