[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.0-25-generic (root@mpn-glaptop) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #33 SMP Fri Nov 7 18:45:25 CET 2014 (Ubuntu 3.16.0-25.33-generic 3.16.7) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=/dev/mapper/sysvg-root ro elevator=deadline acpi_backlight=vendor text [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bab7efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bab7f000-0x00000000bbe7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bbe7f000-0x00000000bbf7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bbf7f000-0x00000000bbffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bbfff000-0x00000000bbffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000bf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.11 04/29/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x43ee00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect [ 0.000000] 1 base 0000000000 mask 7F80000000 write-back [ 0.000000] 2 base 0080000000 mask 7FC0000000 write-back [ 0.000000] 3 base 00BE000000 mask 7FFE000000 uncachable [ 0.000000] 4 base 00BD000000 mask 7FFF000000 uncachable [ 0.000000] 5 base 0100000000 mask 7F00000000 write-back [ 0.000000] 6 base 0200000000 mask 7E00000000 write-back [ 0.000000] 7 base 0400000000 mask 7FC0000000 write-back [ 0.000000] 8 base 043F000000 mask 7FFF000000 uncachable [ 0.000000] 9 base 043EE00000 mask 7FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbc000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fbe000, 0x01fbefff] PGTABLE [ 0.000000] BRK [0x01fbf000, 0x01fbffff] PGTABLE [ 0.000000] BRK [0x01fc0000, 0x01fc0fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43ec00000-0x43edfffff] [ 0.000000] [mem 0x43ec00000-0x43edfffff] page 2M [ 0.000000] BRK [0x01fc1000, 0x01fc1fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43ebfffff] [ 0.000000] [mem 0x43c000000-0x43ebfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff] [ 0.000000] [mem 0x400000000-0x43bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbab7efff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xba9fffff] page 2M [ 0.000000] [mem 0xbaa00000-0xbab7efff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbbfff000-0xbbffffff] [ 0.000000] [mem 0xbbfff000-0xbbffffff] page 4k [ 0.000000] BRK [0x01fc2000, 0x01fc2fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff] [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G [ 0.000000] RAMDISK: [mem 0x34620000-0x36307fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F2FE0 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000BBFFE120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 0x00000000BBFFC000 00010C (v05 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000BBFD1000 0253E9 (v02 HPQOEM 198F 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x00000000BBDE4000 000040 [ 0.000000] ACPI: HPET 0x00000000BBFFB000 000038 (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000BBFFA000 0000BC (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000BBFF9000 00003C (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000BBFF7000 000032 (v02 HPQOEM 198F 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BBFCE000 000313 (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BBFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: FPDT 0x00000000BBFCB000 000044 (v01 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x00000000BBFCA000 000038 (v00 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000BBFC6000 000466 (v01 Isct IsctAsl 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BBFC5000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BBFC4000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BBFC3000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000BBFC2000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112) [ 0.000000] ACPI: ASF! 0x00000000BBFF8000 0000A5 (v32 HPQOEM 198F 00000001 HP 00000001) [ 0.000000] ACPI: DMAR 0x00000000BBFC1000 0000B0 (v01 INTEL HSW 00000001 INTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043edfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43edfffff] [ 0.000000] NODE_DATA [mem 0x43edf9000-0x43edfdfff] [ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e400000-ffff88043e3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x43edfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0xbab7efff] [ 0.000000] node 0: [mem 0xbbfff000-0xbbffffff] [ 0.000000] node 0: [mem 0x100000000-0x43edfffff] [ 0.000000] On node 0 totalpages: 4167964 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11886 pages used for memmap [ 0.000000] DMA32 zone: 760704 pages, LIFO batch:31 [ 0.000000] Normal zone: 53176 pages used for memmap [ 0.000000] Normal zone: 3403264 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xbd200000-0xbf1fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbab7f000-0xbbe7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbe7f000-0xbbf7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbbf7f000-0xbbffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbf1fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] e820: [mem 0xbf200000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043ea00000 s86336 r8192 d24256 u262144 [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4102817 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-25-generic root=/dev/mapper/sysvg-root ro elevator=deadline acpi_backlight=vendor text [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 16296616K/16671856K available (7608K kernel code, 1130K rwdata, 3576K rodata, 1356K init, 1300K bss, 375240K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-7. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:1016 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 67108864 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2693.745 MHz processor [ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.49 BogoMIPS (lpj=10774980) [ 0.000040] pid_max: default: 32768 minimum: 301 [ 0.000048] ACPI: Core revision 20140424 [ 0.015802] ACPI: All ACPI Tables successfully acquired [ 0.030889] Security Framework initialized [ 0.030909] AppArmor: AppArmor initialized [ 0.030911] Yama: becoming mindful. [ 0.032066] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.035552] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.037045] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.037067] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.037335] Initializing cgroup subsys memory [ 0.037361] Initializing cgroup subsys devices [ 0.037369] Initializing cgroup subsys freezer [ 0.037373] Initializing cgroup subsys net_cls [ 0.037378] Initializing cgroup subsys blkio [ 0.037382] Initializing cgroup subsys perf_event [ 0.037385] Initializing cgroup subsys net_prio [ 0.037393] Initializing cgroup subsys hugetlb [ 0.037418] CPU: Physical Processor ID: 0 [ 0.037420] CPU: Processor Core ID: 0 [ 0.037425] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.037425] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.038503] mce: CPU supports 7 MCE banks [ 0.038517] CPU0: Thermal monitoring enabled (TM1) [ 0.038529] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.038529] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.038529] tlb_flushall_shift: 6 [ 0.038662] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000) [ 0.039710] ftrace: allocating 29198 entries in 115 pages [ 0.053492] dmar: Host address width 39 [ 0.053496] dmar: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.053503] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a [ 0.053506] dmar: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.053512] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da [ 0.053514] dmar: RMRR base: 0x000000bbd18000 end: 0x000000bbd37fff [ 0.053516] dmar: RMRR base: 0x000000bd000000 end: 0x000000bf1fffff [ 0.053642] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1 [ 0.053643] HPET id 0 under DRHD base 0xfed91000 [ 0.053645] Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.053816] Enabled IRQ remapping in x2apic mode [ 0.053818] Enabling x2apic [ 0.053820] Enabled x2apic [ 0.053825] Switched APIC routing to cluster x2apic. [ 0.054438] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.094114] smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (fam: 06, model: 45, stepping: 01) [ 0.094123] TSC deadline timer enabled [ 0.094152] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.094175] ... version: 3 [ 0.094177] ... bit width: 48 [ 0.094178] ... generic registers: 4 [ 0.094180] ... value mask: 0000ffffffffffff [ 0.094181] ... max period: 0000ffffffffffff [ 0.094183] ... fixed-purpose events: 3 [ 0.094185] ... event mask: 000000070000000f [ 0.096148] x86: Booting SMP configuration: [ 0.096151] .... node #0, CPUs: #1 [ 0.110473] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.110561] #2 [ 0.122177] CPU2 microcode updated early to revision 0x1c, date = 2014-07-03 [ 0.125454] #3<6>[ 0.139595] x86: Booted up 1 node, 4 CPUs [ 0.139599] smpboot: Total of 4 processors activated (21549.96 BogoMIPS) [ 0.144456] devtmpfs: initialized [ 0.147820] evm: security.selinux [ 0.147822] evm: security.SMACK64 [ 0.147824] evm: security.SMACK64EXEC [ 0.147825] evm: security.SMACK64TRANSMUTE [ 0.147827] evm: security.SMACK64MMAP [ 0.147828] evm: security.ima [ 0.147830] evm: security.capability [ 0.147889] PM: Registering ACPI NVS region [mem 0xbbe7f000-0xbbf7efff] (1048576 bytes) [ 0.148761] pinctrl core: initialized pinctrl subsystem [ 0.148832] regulator-dummy: no parameters [ 0.148867] RTC time: 18:48:27, date: 11/07/14 [ 0.148922] NET: Registered protocol family 16 [ 0.149081] cpuidle: using governor ladder [ 0.149086] cpuidle: using governor menu [ 0.149140] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.149143] ACPI: bus type PCI registered [ 0.149145] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.149226] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.149230] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.149564] PCI: Using configuration type 1 for base access [ 0.152689] ACPI: Added _OSI(Module Device) [ 0.152692] ACPI: Added _OSI(Processor Device) [ 0.152694] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152696] ACPI: Added _OSI(Processor Aggregator Device) [ 0.164303] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.184384] ACPI: Dynamic OEM Table Load: [ 0.184395] ACPI: SSDT 0xFFFF880427C6A000 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.188510] ACPI: Dynamic OEM Table Load: [ 0.188520] ACPI: SSDT 0xFFFF880427CBA000 0005DB (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.192371] ACPI: Dynamic OEM Table Load: [ 0.192379] ACPI: SSDT 0xFFFF880427CC0C00 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 1.796275] ACPI: Interpreter enabled [ 1.796285] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580) [ 1.796293] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580) [ 1.796310] ACPI: (supports S0 S3 S4 S5) [ 1.796312] ACPI: Using IOAPIC for interrupt routing [ 1.796339] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.797554] ACPI: Power Resource [APPR] (off) [ 1.801345] ACPI: Power Resource [COMP] (on) [ 1.801511] ACPI: Power Resource [LPP] (on) [ 1.802566] ACPI: Power Resource [PXP6] (on) [ 1.921811] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.921819] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.923335] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 1.924027] PCI host bridge to bus 0000:00 [ 1.924031] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.924034] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 1.924036] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 1.924039] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 1.924041] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff] [ 1.924044] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff] [ 1.924046] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff] [ 1.924048] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] [ 1.924058] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 1.924167] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 1.924179] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] [ 1.924186] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 1.924191] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 1.924293] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 1.924303] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit] [ 1.924429] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 1.924445] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit] [ 1.924492] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 1.924549] pci 0000:00:14.0: System wakeup disabled by ACPI [ 1.924589] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 1.924609] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073901f 64bit] [ 1.924676] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.924771] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000 [ 1.924787] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff] [ 1.924795] pci 0000:00:19.0: reg 0x14: [mem 0xd073e000-0xd073efff] [ 1.924802] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 1.924858] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 1.924916] pci 0000:00:19.0: System wakeup disabled by ACPI [ 1.924956] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 1.924970] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit] [ 1.925035] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.925122] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 1.925185] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.925276] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 [ 1.925340] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.925400] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 1.925434] pci 0000:00:1c.5: [8086:9c1a] type 01 class 0x060400 [ 1.925498] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.925594] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 1.925612] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff] [ 1.925686] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.925745] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1.925785] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 1.925975] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 1.925989] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 1.925996] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 1.926003] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 1.926010] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 1.926016] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 1.926023] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff] [ 1.926057] pci 0000:00:1f.2: PME# supported from D3hot [ 1.926140] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 1.926153] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit] [ 1.926172] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f] [ 1.926307] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.926313] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff] [ 1.926394] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000 [ 1.926432] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit] [ 1.926616] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.926654] pci 0000:02:00.0: System wakeup disabled by ACPI [ 1.935160] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.935165] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff] [ 1.935231] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000 [ 1.935250] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff] [ 1.935378] pci 0000:03:00.0: supports D1 D2 [ 1.935380] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 1.943157] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 1.943163] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff] [ 1.943184] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported) [ 1.944020] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.944065] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.944107] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.944149] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 1.944191] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.944231] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.944273] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.944314] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.944658] ACPI: Enabled 5 GPEs in block 00 to 7F [ 1.944703] ACPI : EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62 [ 1.944805] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 1.944808] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.944812] vgaarb: loaded [ 1.944814] vgaarb: bridge control possible 0000:00:02.0 [ 1.945037] SCSI subsystem initialized [ 1.945084] libata version 3.00 loaded. [ 1.945110] ACPI: bus type USB registered [ 1.945127] usbcore: registered new interface driver usbfs [ 1.945136] usbcore: registered new interface driver hub [ 1.945157] usbcore: registered new device driver usb [ 1.945294] PCI: Using ACPI for IRQ routing [ 1.950661] PCI: pci_cache_line_size set to 64 bytes [ 1.950701] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 1.950703] e820: reserve RAM buffer [mem 0xbab7f000-0xbbffffff] [ 1.950705] e820: reserve RAM buffer [mem 0x43ee00000-0x43fffffff] [ 1.950813] NetLabel: Initializing [ 1.950815] NetLabel: domain hash size = 128 [ 1.950817] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.950829] NetLabel: unlabeled traffic allowed by default [ 1.950892] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.950899] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.952936] Switched to clocksource hpet [ 1.958730] AppArmor: AppArmor Filesystem Enabled [ 1.958767] pnp: PnP ACPI init [ 1.958783] ACPI: bus type PNP registered [ 1.958983] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.958987] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 1.958989] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.958992] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.958994] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 1.958997] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.959000] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved [ 1.959002] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.959006] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.959009] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved [ 1.959013] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.959157] system 00:01: [io 0x0200-0x027f] has been reserved [ 1.959161] system 00:01: [io 0xffff] has been reserved [ 1.959163] system 00:01: [io 0xffff] has been reserved [ 1.959166] system 00:01: [io 0xffff] has been reserved [ 1.959168] system 00:01: [io 0x1800-0x18fe] could not be reserved [ 1.959171] system 00:01: [io 0xef80-0xef9f] has been reserved [ 1.959174] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.959224] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.959388] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 1.959416] pnp 00:04: Plug and Play ACPI device, IDs SYN3003 SYN0100 SYN0002 PNP0f13 (active) [ 1.959664] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved [ 1.959667] system 00:05: [mem 0x40004000-0x40004fff] could not be reserved [ 1.959670] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.959906] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 1.959921] pnp: PnP ACPI: found 7 devices [ 1.959923] ACPI: bus type PNP unregistered [ 1.966122] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 1.966126] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 1.966131] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 1.966133] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 1.966140] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.966145] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff] [ 1.966148] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 1.966153] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff] [ 1.966160] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 1.966165] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff] [ 1.966172] pci 0000:00:1c.5: PCI bridge to [bus 03] [ 1.966175] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff] [ 1.966180] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff] [ 1.966184] pci 0000:00:1c.5: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.966191] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.966193] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.966195] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.966196] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff] [ 1.966198] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff] [ 1.966199] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff] [ 1.966201] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff] [ 1.966202] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff] [ 1.966204] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff] [ 1.966206] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 1.966207] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff] [ 1.966209] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref] [ 1.966238] NET: Registered protocol family 2 [ 1.966464] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.966694] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.966814] TCP: Hash tables configured (established 131072 bind 65536) [ 1.966832] TCP: reno registered [ 1.966852] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.966905] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.966984] NET: Registered protocol family 1 [ 1.966998] pci 0000:00:02.0: Video device with shadowed ROM [ 1.967005] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 1.967223] pci 0000:00:1d.0: enabling device (0000 -> 0002) [ 1.967395] PCI: CLS 64 bytes, default 64 [ 1.967449] Trying to unpack rootfs image as initramfs... [ 2.483606] Freeing initrd memory: 29600K (ffff880034620000 - ffff880036308000) [ 2.484614] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.484620] software IO TLB [mem 0xb6b7f000-0xbab7f000] (64MB) mapped at [ffff8800b6b7f000-ffff8800bab7efff] [ 2.484847] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer [ 2.484895] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c [ 2.484904] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c [ 2.484914] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c [ 2.484924] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c [ 2.484972] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 2.485000] Scanning for low memory corruption every 60 seconds [ 2.485323] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 2.485347] Initialise system trusted keyring [ 2.485374] audit: initializing netlink subsys (disabled) [ 2.485387] audit: type=2000 audit(1415386109.472:1): initialized [ 2.485729] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.487255] zpool: loaded [ 2.487259] zbud: loaded [ 2.487436] VFS: Disk quotas dquot_6.5.2 [ 2.487473] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.487935] fuse init (API version 7.23) [ 2.488021] msgmni has been set to 31887 [ 2.488082] Key type big_key registered [ 2.488413] Key type asymmetric registered [ 2.488417] Asymmetric key parser 'x509' registered [ 2.488457] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 2.488507] io scheduler noop registered [ 2.488512] io scheduler deadline registered (default) [ 2.488563] io scheduler cfq registered [ 2.488791] pcieport 0000:00:1c.0: irq 58 for MSI/MSI-X [ 2.488951] pcieport 0000:00:1c.3: irq 59 for MSI/MSI-X [ 2.489100] pcieport 0000:00:1c.5: irq 60 for MSI/MSI-X [ 2.489195] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.489201] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 2.489216] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 2.489219] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.489222] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 2.489237] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt [ 2.489240] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.489244] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded [ 2.489259] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.489289] pciehp 0000:00:1c.5:pcie04: Slot #5 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+ [ 2.489318] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded [ 2.489322] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.489371] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 2.489373] vesafb: scrolling: redraw [ 2.489376] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 2.489396] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k [ 2.684313] Console: switching to colour frame buffer device 240x67 [ 2.879331] fb0: VESA VGA frame buffer device [ 2.879960] intel_idle: MWAIT substates: 0x11142120 [ 2.879962] intel_idle: v0.4 model 0x45 [ 2.879963] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.880381] ACPI: AC Adapter [AC] (on-line) [ 2.881159] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 2.882320] ACPI: Sleep Button [SLPB] [ 2.882865] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 2.884016] ACPI: Lid Switch [LID] [ 2.884524] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.885556] ACPI: Power Button [PWRF] [ 2.910566] thermal LNXTHERM:00: registered as thermal_zone0 [ 2.911358] ACPI: Thermal Zone [CPUZ] (45 C) [ 2.935687] thermal LNXTHERM:01: registered as thermal_zone1 [ 2.936480] ACPI: Thermal Zone [GFXZ] (0 C) [ 2.951725] thermal LNXTHERM:02: registered as thermal_zone2 [ 2.952517] ACPI: Thermal Zone [EXTZ] (38 C) [ 2.967797] thermal LNXTHERM:03: registered as thermal_zone3 [ 2.968601] ACPI: Thermal Zone [LOCZ] (37 C) [ 2.983896] thermal LNXTHERM:04: registered as thermal_zone4 [ 2.984699] ACPI: Thermal Zone [BATZ] (31 C) [ 2.985597] thermal LNXTHERM:05: registered as thermal_zone5 [ 2.986383] ACPI: Thermal Zone [PCHZ] (114 C) [ 2.987051] GHES: HEST is not enabled! [ 2.987776] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.990638] Linux agpgart interface v0.103 [ 2.992348] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16) [ 3.006238] ACPI: Battery Slot [BAT0] (battery present) [ 3.007052] ACPI: Battery Slot [BAT1] (battery absent) [ 3.258865] brd: module loaded [ 3.259889] loop: module loaded [ 3.260555] libphy: Fixed MDIO Bus: probed [ 3.261127] tun: Universal TUN/TAP device driver, 1.6 [ 3.261827] tun: (C) 1999-2004 Max Krasnyansky [ 3.262732] PPP generic driver version 2.4.2 [ 3.263366] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.264271] ehci-pci: EHCI PCI platform driver [ 3.265044] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.265770] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.266801] ehci-pci 0000:00:1d.0: debug port 2 [ 3.271313] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 3.271333] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000 [ 3.280520] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.281378] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.282321] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.283322] usb usb1: Product: EHCI Host Controller [ 3.325098] usb usb1: Manufacturer: Linux 3.16.0-25-generic ehci_hcd [ 3.367308] usb usb1: SerialNumber: 0000:00:1d.0 [ 3.409623] hub 1-0:1.0: USB hub found [ 3.451826] hub 1-0:1.0: 3 ports detected [ 3.493830] tsc: Refined TSC clocksource calibration: 2693.764 MHz [ 3.536240] ehci-platform: EHCI generic platform driver [ 3.578189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.620446] ohci-pci: OHCI PCI platform driver [ 3.662719] ohci-platform: OHCI generic platform driver [ 3.705218] uhci_hcd: USB Universal Host Controller Interface driver [ 3.747937] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.790928] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.834165] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.834185] xhci_hcd 0000:00:14.0: irq 61 for MSI/MSI-X [ 3.834238] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.872287] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.920831] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.964400] usb usb2: Product: xHCI Host Controller [ 4.007650] usb usb2: Manufacturer: Linux 3.16.0-25-generic xhci_hcd [ 4.020515] usb 1-1: New USB device found, idVendor=8087, idProduct=8000 [ 4.020516] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.020796] hub 1-1:1.0: USB hub found [ 4.020887] hub 1-1:1.0: 8 ports detected [ 4.221714] usb usb2: SerialNumber: 0000:00:14.0 [ 4.264185] hub 2-0:1.0: USB hub found [ 4.306263] hub 2-0:1.0: 9 ports detected [ 4.348778] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.390395] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 4.432452] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 [ 4.474276] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.515732] usb usb3: Product: xHCI Host Controller [ 4.556665] usb usb3: Manufacturer: Linux 3.16.0-25-generic xhci_hcd [ 4.597443] usb usb3: SerialNumber: 0000:00:14.0 [ 4.637668] Switched to clocksource tsc [ 4.637773] hub 3-0:1.0: USB hub found [ 4.637780] hub 3-0:1.0: 4 ports detected [ 4.638116] usb: failed to peer usb3-port3 and usb2-port1 by location (usb3-port3:none) (usb2-port1:usb3-port1) [ 4.638117] usb usb3-port3: failed to peer to usb2-port1 (-16) [ 4.638117] usb: port power management may be unreliable [ 4.638327] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 4.639508] i8042: Detected active multiplexing controller, rev 1.1 [ 4.640105] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.640108] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 4.640133] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 4.640152] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 4.640172] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 4.640296] mousedev: PS/2 mouse device common for all mice [ 4.640447] rtc_cmos 00:02: RTC can wake from S4 [ 4.640568] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 4.640593] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 4.640661] device-mapper: uevent: version 1.0.3 [ 4.640721] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 4.640744] Intel P-state driver initializing. [ 4.803927] usb 2-1: new high-speed USB device number 2 using xhci_hcd [ 4.932173] usb 2-1: New USB device found, idVendor=0424, idProduct=2134 [ 4.932175] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.932176] usb 2-1: Product: USB2134B [ 4.932177] usb 2-1: Manufacturer: SMSC [ 4.932451] hub 2-1:1.0: USB hub found [ 4.932470] hub 2-1:1.0: 4 ports detected [ 5.099819] usb 2-3: new high-speed USB device number 3 using xhci_hcd [ 5.228065] usb 2-3: New USB device found, idVendor=0424, idProduct=2134 [ 5.228066] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.228067] usb 2-3: Product: USB2134B [ 5.228069] usb 2-3: Manufacturer: SMSC [ 5.228351] hub 2-3:1.0: USB hub found [ 5.228369] hub 2-3:1.0: 4 ports detected [ 5.228734] usb: failed to peer 2-3-port1 and usb3-port1 by location (2-3-port1:none) (usb3-port1:usb2-port1) [ 5.228735] usb 2-3-port1: failed to peer to usb3-port1 (-16) [ 5.228822] usb: failed to peer 2-3-port2 and usb3-port1 by location (2-3-port2:none) (usb3-port1:usb2-port1) [ 5.228823] usb 2-3-port2: failed to peer to usb3-port1 (-16) [ 5.395712] usb 2-5: new full-speed USB device number 4 using xhci_hcd [ 5.524753] usb 2-5: New USB device found, idVendor=138a, idProduct=003f [ 5.524754] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 5.524756] usb 2-5: SerialNumber: 00a034c87892 [ 5.691597] usb 2-7: new high-speed USB device number 5 using xhci_hcd [ 5.958322] usb 2-7: New USB device found, idVendor=05c8, idProduct=0369 [ 5.958324] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.958325] usb 2-7: Product: HP HD Webcam [ 5.958326] usb 2-7: Manufacturer: SunplusIT INC. [ 6.139468] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd [ 6.155769] usb 3-1: New USB device found, idVendor=0424, idProduct=5534 [ 6.155771] usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 6.155772] usb 3-1: Product: USB5534B [ 6.155773] usb 3-1: Manufacturer: SMSC [ 6.156103] hub 3-1:1.0: USB hub found [ 6.156122] hub 3-1:1.0: 4 ports detected [ 6.267427] usb 3-3: new SuperSpeed USB device number 3 using xhci_hcd [ 6.283717] usb 3-3: New USB device found, idVendor=0424, idProduct=5534 [ 6.283718] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 6.283719] usb 3-3: Product: USB5534B [ 6.283720] usb 3-3: Manufacturer: SMSC [ 6.284064] hub 3-3:1.0: USB hub found [ 6.284083] hub 3-3:1.0: 4 ports detected [ 6.284266] usb: failed to peer 3-3-port1 and usb2-port1 by location (3-3-port1:none) (usb2-port1:usb3-port1) [ 6.284268] usb 3-3-port1: failed to peer to usb2-port1 (-16) [ 6.284354] usb: failed to peer 3-3-port2 and usb2-port1 by location (3-3-port2:none) (usb2-port1:usb3-port1) [ 6.284355] usb 3-3-port2: failed to peer to usb2-port1 (-16) [ 6.371368] usb 2-1.1: new low-speed USB device number 6 using xhci_hcd [ 6.464337] usb 2-1.1: New USB device found, idVendor=045e, idProduct=077d [ 6.464338] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.464340] usb 2-1.1: Product: Comfort Mouse 6000 [ 6.464341] usb 2-1.1: Manufacturer: Microsoft [ 6.464431] usb 2-1.1: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes [ 6.551302] usb 2-1.4: new full-speed USB device number 7 using xhci_hcd [ 6.641684] usb 2-1.4: New USB device found, idVendor=05f3, idProduct=0081 [ 6.641685] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.641686] usb 2-1.4: Product: Kinesis Keyboard Hub [ 6.641687] usb 2-1.4: Manufacturer: PI Engineering [ 6.641755] usb 2-1.4: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes [ 6.642185] hub 2-1.4:1.0: USB hub found [ 6.642473] hub 2-1.4:1.0: 4 ports detected [ 6.731237] usb 2-3.2: new full-speed USB device number 8 using xhci_hcd [ 6.820413] usb 2-3.2: New USB device found, idVendor=8087, idProduct=07dc [ 6.820414] usb 2-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.907173] usb 2-3.4: new full-speed USB device number 9 using xhci_hcd [ 6.996340] usb 2-3.4: New USB device found, idVendor=1050, idProduct=0200 [ 6.996342] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.996343] usb 2-3.4: Product: Yubico Gnubby (gnubby1) [ 6.996344] usb 2-3.4: Manufacturer: Yubico [ 7.067987] usb 2-1.4.2: new full-speed USB device number 10 using xhci_hcd [ 7.166717] usb 2-1.4.2: New USB device found, idVendor=05f3, idProduct=0007 [ 7.166718] usb 2-1.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.253540] Intel pstate controlling: cpu 0 [ 8.295531] Intel pstate controlling: cpu 1 [ 8.311168] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 8.349181] Intel pstate controlling: cpu 2 [ 8.376149] Intel pstate controlling: cpu 3 [ 8.402770] Consider also installing thermald for improved thermal control. [ 8.429765] ledtrig-cpu: registered to indicate activity on CPUs [ 8.456833] TCP: cubic registered [ 8.483913] NET: Registered protocol family 10 [ 8.511267] NET: Registered protocol family 17 [ 8.538372] Key type dns_resolver registered [ 8.565576] Loading compiled-in X.509 certificates [ 8.592448] Loaded X.509 cert 'Magrathea: Glacier signing key: 18350faa610de1843b241fb08ed1c71bac94a86f' [ 8.619217] registered taskstats version 1 [ 8.647169] Key type trusted registered [ 8.675111] Key type encrypted registered [ 8.702428] AppArmor: AppArmor sha1 policy hashing enabled [ 9.374411] evm: HMAC attrs: 0x1 [ 9.401122] Magic number: 6:254:847 [ 9.426986] rtc_cmos 00:02: setting system clock to 2014-11-07 18:48:36 UTC (1415386116) [ 9.453450] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 9.479832] EDD information not available. [ 9.506076] PM: Hibernation image not present or could not be loaded. [ 9.506623] Freeing unused kernel memory: 1356K (ffffffff81d1c000 - ffffffff81e6f000) [ 9.533577] Write protecting the kernel read-only data: 12288k [ 9.561520] Freeing unused kernel memory: 572K (ffff880001771000 - ffff880001800000) [ 9.589580] Freeing unused kernel memory: 520K (ffff880001b7e000 - ffff880001c00000) [ 9.654255] systemd-udevd[130]: starting version 204 [ 9.691288] wmi: Mapper loaded [ 9.724833] hidraw: raw HID events driver (C) Jiri Kosina [ 9.755298] [drm] Initialized drm 1.1.0 20060810 [ 9.785516] pps_core: LinuxPPS API ver. 1 registered [ 9.815637] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 9.847483] rtsx_pci 0000:03:00.0: irq 62 for MSI/MSI-X [ 9.847495] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 62 [ 9.878592] PTP clock support registered [ 9.894291] usbcore: registered new interface driver usbhid [ 9.894291] usbhid: USB HID core driver [ 9.974979] ahci 0000:00:1f.2: version 3.0 [ 9.975145] ahci 0000:00:1f.2: irq 63 for MSI/MSI-X [ 9.976954] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 9.990050] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode [ 9.990052] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 9.990356] scsi0 : ahci [ 9.990457] scsi1 : ahci [ 9.990501] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 63 [ 9.990502] ata2: DUMMY [ 10.191380] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 10.221982] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 10.253121] e1000e 0000:00:19.0: irq 64 for MSI/MSI-X [ 10.253461] input: Microsoft Comfort Mouse 6000 as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:077D.0001/input/input10 [ 10.283941] hid-generic 0003:045E:077D.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Mouse 6000] on usb-0000:00:14.0-1.1/input0 [ 10.316405] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 10.341449] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 10.341960] hid-generic 0003:1050:0200.0002: hiddev0,hidraw1: USB HID v1.00 Device [Yubico Yubico Gnubby (gnubby1)] on usb-0000:00:14.0-3.4/input0 [ 10.342087] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.4/2-1.4.2/2-1.4.2:1.0/0003:05F3:0007.0003/input/input11 [ 10.342170] hid-generic 0003:05F3:0007.0003: input,hidraw2: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:14.0-1.4.2/input0 [ 10.345122] input: HID 05f3:0007 as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.4/2-1.4.2/2-1.4.2:1.1/0003:05F3:0007.0004/input/input12 [ 10.345199] hid-generic 0003:05F3:0007.0004: input,hidraw3: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:14.0-1.4.2/input1 [ 10.354158] ata1.00: ATA-9: INTEL SSDSC2BF180A4H, LH6i, max UDMA/133 [ 10.354160] ata1.00: 351651888 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 10.391817] ata1.00: configured for UDMA/133 [ 10.391888] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BF18 LH6i PQ: 0 ANSI: 5 [ 10.392037] sd 0:0:0:0: [sda] 351651888 512-byte logical blocks: (180 GB/167 GiB) [ 10.392071] sd 0:0:0:0: [sda] Write Protect is off [ 10.392072] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 10.392083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.392228] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 10.392585] sda: sda1 sda2 < sda5 > [ 10.392778] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.422394] e1000e 0000:00:19.0 eth0: registered PHC clock [ 10.422396] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 64:51:06:9e:67:a6 [ 10.422397] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 10.422428] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 11.076116] AVX2 version of gcm_enc/dec engaged. [ 11.113110] [drm] Memory usable by graphics device = 2048M [ 11.149753] [drm] Replacing VGA console driver [ 11.186201] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 11.186203] fb: switching to inteldrmfb from VESA VGA [ 11.222579] Console: switching to colour dummy device 80x25 [ 11.245714] i915 0000:00:02.0: irq 65 for MSI/MSI-X [ 11.245726] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.245730] [drm] Driver supports precise vblank timestamp query. [ 11.245786] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 11.265803] [drm] seamless DRRS supported for eDP panel. [ 11.302232] fbcon: inteldrmfb (fb0) is primary device [ 11.921279] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input9 [ 12.373203] Console: switching to colour frame buffer device 240x67 [ 12.380233] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 12.380263] i915 0000:00:02.0: registered panic notifier [ 12.386138] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 12.386262] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14 [ 12.386381] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 12.493151] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 119000, found 0) [ 12.493151] ------------[ cut here ]------------ [ 12.493171] WARNING: CPU: 0 PID: 61 at /home/mpn/code/linux/drivers/gpu/drm/i915/intel_display.c:10221 check_crtc_state+0x235/0x350 [i915]() [ 12.493172] pipe state doesn't match! [ 12.493183] Modules linked in: crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel i915 aes_x86_64 i2c_algo_bit hid_generic rtsx_pci_sdmmc lrw e1000e gf128mul glue_helper ahci ablk_helper drm_kms_helper ptp rtsx_pci usbhid psmouse cryptd pps_core libahci drm hid wmi video [ 12.493185] CPU: 0 PID: 61 Comm: kworker/0:1 Not tainted 3.16.0-25-generic #33 [ 12.493185] Hardware name: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.11 04/29/2014 [ 12.493190] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 12.493192] 0000000000000009 ffff8804236d7810 ffffffff8176097b ffff8804236d7858 [ 12.493194] ffff8804236d7848 ffffffff8106dd1d ffff8804228946f8 ffff8804236d78e0 [ 12.493195] ffff880422492000 ffff880422894000 ffff880422492340 ffff8804236d78a8 [ 12.493196] Call Trace: [ 12.493200] [] dump_stack+0x45/0x56 [ 12.493203] [] warn_slowpath_common+0x7d/0xa0 [ 12.493204] [] warn_slowpath_fmt+0x4c/0x50 [ 12.493216] [] ? intel_pipe_config_compare+0x845/0xb40 [i915] [ 12.493226] [] check_crtc_state+0x235/0x350 [i915] [ 12.493238] [] intel_modeset_check_state+0x28f/0x7a0 [i915] [ 12.493248] [] intel_set_mode+0x25/0x30 [i915] [ 12.493258] [] intel_crtc_set_config+0x91c/0xdf0 [i915] [ 12.493270] [] drm_mode_set_config_internal+0x61/0xe0 [drm] [ 12.493274] [] restore_fbdev_mode+0xb3/0xe0 [drm_kms_helper] [ 12.493277] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x23/0x40 [drm_kms_helper] [ 12.493281] [] drm_fb_helper_set_par+0x28/0x70 [drm_kms_helper] [ 12.493284] [] drm_fb_helper_hotplug_event+0x8f/0xe0 [drm_kms_helper] [ 12.493295] [] intel_fbdev_output_poll_changed+0x1e/0x30 [i915] [ 12.493298] [] drm_kms_helper_hotplug_event+0x27/0x30 [drm_kms_helper] [ 12.493309] [] intel_dp_mst_hotplug+0x15/0x20 [i915] [ 12.493312] [] drm_dp_send_link_address+0xf2/0x210 [drm_kms_helper] [ 12.493314] [] ? pick_next_task_fair+0x3db/0x880 [ 12.493317] [] ? __switch_to+0x122/0x590 [ 12.493320] [] drm_dp_check_and_send_link_address+0x85/0xb0 [drm_kms_helper] [ 12.493323] [] drm_dp_mst_link_probe_work+0x1c/0x20 [drm_kms_helper] [ 12.493325] [] process_one_work+0x182/0x450 [ 12.493326] [] worker_thread+0x123/0x5a0 [ 12.493328] [] ? rescuer_thread+0x380/0x380 [ 12.493330] [] kthread+0xd2/0xf0 [ 12.493332] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 12.493334] [] ret_from_fork+0x7c/0xb0 [ 12.493335] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 12.493336] ---[ end trace 42f420b4eb8c2461 ]--- [ 12.503272] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 119000, found 0) [ 12.503273] ------------[ cut here ]------------ [ 12.503284] WARNING: CPU: 0 PID: 61 at /home/mpn/code/linux/drivers/gpu/drm/i915/intel_display.c:10221 check_crtc_state+0x235/0x350 [i915]() [ 12.503285] pipe state doesn't match! [ 12.503293] Modules linked in: crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel i915 aes_x86_64 i2c_algo_bit hid_generic rtsx_pci_sdmmc lrw e1000e gf128mul glue_helper ahci ablk_helper drm_kms_helper ptp rtsx_pci usbhid psmouse cryptd pps_core libahci drm hid wmi video [ 12.503294] CPU: 0 PID: 61 Comm: kworker/0:1 Tainted: G W 3.16.0-25-generic #33 [ 12.503295] Hardware name: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.11 04/29/2014 [ 12.503298] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 12.503300] 0000000000000009 ffff8804236d7810 ffffffff8176097b ffff8804236d7858 [ 12.503301] ffff8804236d7848 ffffffff8106dd1d ffff8804228946f8 ffff8804236d78e0 [ 12.503302] ffff880422492000 ffff880422894000 ffff880422492340 ffff8804236d78a8 [ 12.503303] Call Trace: [ 12.503305] [] dump_stack+0x45/0x56 [ 12.503306] [] warn_slowpath_common+0x7d/0xa0 [ 12.503308] [] warn_slowpath_fmt+0x4c/0x50 [ 12.503318] [] ? intel_pipe_config_compare+0x845/0xb40 [i915] [ 12.503328] [] check_crtc_state+0x235/0x350 [i915] [ 12.503339] [] intel_modeset_check_state+0x28f/0x7a0 [i915] [ 12.503349] [] intel_set_mode+0x25/0x30 [i915] [ 12.503358] [] intel_crtc_set_config+0x91c/0xdf0 [i915] [ 12.503367] [] drm_mode_set_config_internal+0x61/0xe0 [drm] [ 12.503371] [] restore_fbdev_mode+0xb3/0xe0 [drm_kms_helper] [ 12.503374] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x23/0x40 [drm_kms_helper] [ 12.503377] [] drm_fb_helper_set_par+0x28/0x70 [drm_kms_helper] [ 12.503380] [] drm_fb_helper_hotplug_event+0x8f/0xe0 [drm_kms_helper] [ 12.503391] [] intel_fbdev_output_poll_changed+0x1e/0x30 [i915] [ 12.503394] [] drm_kms_helper_hotplug_event+0x27/0x30 [drm_kms_helper] [ 12.503405] [] intel_dp_mst_hotplug+0x15/0x20 [i915] [ 12.503408] [] drm_dp_send_link_address+0xf2/0x210 [drm_kms_helper] [ 12.503410] [] ? pick_next_task_fair+0x3db/0x880 [ 12.503412] [] ? __switch_to+0x122/0x590 [ 12.503415] [] drm_dp_check_and_send_link_address+0x85/0xb0 [drm_kms_helper] [ 12.503418] [] drm_dp_mst_link_probe_work+0x1c/0x20 [drm_kms_helper] [ 12.503434] [] process_one_work+0x182/0x450 [ 12.503435] [] worker_thread+0x123/0x5a0 [ 12.503437] [] ? rescuer_thread+0x380/0x380 [ 12.503439] [] kthread+0xd2/0xf0 [ 12.503441] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 12.503442] [] ret_from_fork+0x7c/0xb0 [ 12.503444] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 12.503445] ---[ end trace 42f420b4eb8c2462 ]--- [ 12.503449] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode.crtc_clock (expected 119000, found 0) [ 12.503449] ------------[ cut here ]------------ [ 12.503460] WARNING: CPU: 0 PID: 61 at /home/mpn/code/linux/drivers/gpu/drm/i915/intel_display.c:10221 check_crtc_state+0x235/0x350 [i915]() [ 12.503460] pipe state doesn't match! [ 12.503467] Modules linked in: crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel i915 aes_x86_64 i2c_algo_bit hid_generic rtsx_pci_sdmmc lrw e1000e gf128mul glue_helper ahci ablk_helper drm_kms_helper ptp rtsx_pci usbhid psmouse cryptd pps_core libahci drm hid wmi video [ 12.503468] CPU: 0 PID: 61 Comm: kworker/0:1 Tainted: G W 3.16.0-25-generic #33 [ 12.503469] Hardware name: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.11 04/29/2014 [ 12.503472] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 12.503474] 0000000000000009 ffff8804236d7810 ffffffff8176097b ffff8804236d7858 [ 12.503475] ffff8804236d7848 ffffffff8106dd1d ffff8804228956f8 ffff8804236d78e0 [ 12.503476] ffff880422492000 ffff880422895000 ffff880422492340 ffff8804236d78a8 [ 12.503477] Call Trace: [ 12.503478] [] dump_stack+0x45/0x56 [ 12.503480] [] warn_slowpath_common+0x7d/0xa0 [ 12.503482] [] warn_slowpath_fmt+0x4c/0x50 [ 12.503491] [] ? intel_pipe_config_compare+0x845/0xb40 [i915] [ 12.503500] [] check_crtc_state+0x235/0x350 [i915] [ 12.503511] [] intel_modeset_check_state+0x28f/0x7a0 [i915] [ 12.503520] [] intel_set_mode+0x25/0x30 [i915] [ 12.503530] [] intel_crtc_set_config+0x91c/0xdf0 [i915] [ 12.503538] [] drm_mode_set_config_internal+0x61/0xe0 [drm] [ 12.503541] [] restore_fbdev_mode+0xb3/0xe0 [drm_kms_helper] [ 12.503544] [] drm_fb_helper_restore_fbdev_mode_unlocked+0x23/0x40 [drm_kms_helper] [ 12.503548] [] drm_fb_helper_set_par+0x28/0x70 [drm_kms_helper] [ 12.503551] [] drm_fb_helper_hotplug_event+0x8f/0xe0 [drm_kms_helper] [ 12.503561] [] intel_fbdev_output_poll_changed+0x1e/0x30 [i915] [ 12.503569] [] drm_kms_helper_hotplug_event+0x27/0x30 [drm_kms_helper] [ 12.503580] [] intel_dp_mst_hotplug+0x15/0x20 [i915] [ 12.503583] [] drm_dp_send_link_address+0xf2/0x210 [drm_kms_helper] [ 12.503585] [] ? pick_next_task_fair+0x3db/0x880 [ 12.503586] [] ? __switch_to+0x122/0x590 [ 12.503590] [] drm_dp_check_and_send_link_address+0x85/0xb0 [drm_kms_helper] [ 12.503592] [] drm_dp_mst_link_probe_work+0x1c/0x20 [drm_kms_helper] [ 12.503594] [] process_one_work+0x182/0x450 [ 12.503595] [] worker_thread+0x123/0x5a0 [ 12.503597] [] ? rescuer_thread+0x380/0x380 [ 12.503598] [] kthread+0xd2/0xf0 [ 12.503600] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 12.503602] [] ret_from_fork+0x7c/0xb0 [ 12.503604] [] ? kthread_create_on_node+0x1c0/0x1c0 [ 12.503604] ---[ end trace 42f420b4eb8c2463 ]--- [ 12.757302] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800, board id: 2768, fw id: 1478018 [ 12.796087] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input13 [ 12.825225] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 12.885671] random: dropbear urandom read with 68 bits of entropy available [ 12.990529] e1000e 0000:00:19.0: irq 64 for MSI/MSI-X [ 13.093033] e1000e 0000:00:19.0: irq 64 for MSI/MSI-X [ 13.093118] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.691427] random: nonblocking pool is initialized [ 23.553142] raid6: sse2x1 10522 MB/s [ 23.621116] raid6: sse2x2 13243 MB/s [ 23.689088] raid6: sse2x4 15268 MB/s [ 23.757066] raid6: avx2x1 20393 MB/s [ 23.825039] raid6: avx2x2 23418 MB/s [ 23.893015] raid6: avx2x4 27155 MB/s [ 23.893026] raid6: using algorithm avx2x4 (27155 MB/s) [ 23.893038] raid6: using avx2x2 recovery algorithm [ 23.893858] xor: automatically using best checksumming function: [ 23.932998] avx : 29551.000 MB/sec [ 23.941865] Btrfs loaded [ 23.968203] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 24.195715] Adding 16674812k swap on /dev/mapper/sysvg-swap_1. Priority:-1 extents:1 across:16674812k SSFS [ 24.242162] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 24.289201] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 24.295345] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 25.245934] audit: type=1805 audit(1415386132.319:2): action="dont_measure" fsmagic="0x9fa0" res=1 [ 25.245941] audit: type=1805 audit(1415386132.319:3): action="dont_measure" fsmagic="0x62656572" res=1 [ 25.245945] audit: type=1805 audit(1415386132.319:4): action="dont_measure" fsmagic="0x64626720" res=1 [ 25.245949] audit: type=1805 audit(1415386132.319:5): action="dont_measure" fsmagic="0x01021994" res=1 [ 25.245953] audit: type=1805 audit(1415386132.319:6): action="dont_measure" fsmagic="0x858458f6" res=1 [ 25.245957] audit: type=1805 audit(1415386132.319:7): action="dont_measure" fsmagic="0x1cd1" res=1 [ 25.245961] audit: type=1805 audit(1415386132.319:8): action="dont_measure" fsmagic="0x42494e4d" res=1 [ 25.245965] audit: type=1805 audit(1415386132.319:9): action="dont_measure" fsmagic="0x73636673" res=1 [ 25.245969] audit: type=1805 audit(1415386132.319:10): action="dont_measure" fsmagic="0xf97cff8c" res=1 [ 25.245973] audit: type=1805 audit(1415386132.319:11): action="audit" func="BPRM_CHECK" res=1 [ 25.290836] systemd-udevd[744]: starting version 204 [ 25.334894] lp: driver loaded but no devices found [ 25.349941] Initializing HPQ6001 module [ 25.350026] input: HP Wireless hotkeys as /devices/virtual/input/input16 [ 25.360917] ppdev: user-space parallel port driver [ 25.364875] hp_accel: hardware type HPB64xx found [ 25.416727] mei_me 0000:00:16.0: irq 66 for MSI/MSI-X [ 25.450289] Bluetooth: Core ver 2.19 [ 25.450306] NET: Registered protocol family 31 [ 25.450307] Bluetooth: HCI device and connection manager initialized [ 25.450314] Bluetooth: HCI socket layer initialized [ 25.450316] Bluetooth: L2CAP socket layer initialized [ 25.450323] Bluetooth: SCO socket layer initialized [ 25.450718] cfg80211: Calling CRDA to update world regulatory domain [ 25.458972] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.458975] Bluetooth: BNEP filters: protocol multicast [ 25.458982] Bluetooth: BNEP socket layer initialized [ 25.463441] Bluetooth: RFCOMM TTY layer initialized [ 25.463452] Bluetooth: RFCOMM socket layer initialized [ 25.463456] Bluetooth: RFCOMM ver 1.11 [ 25.485269] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 25.485272] Copyright(c) 2003- 2014 Intel Corporation [ 25.485425] iwlwifi 0000:02:00.0: irq 67 for MSI/MSI-X [ 25.494003] lis3lv02d: 8 bits 3DC sensor found [ 25.496973] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm [ 25.502811] snd_hda_intel 0000:00:03.0: irq 68 for MSI/MSI-X [ 25.503023] snd_hda_intel 0000:00:1b.0: irq 69 for MSI/MSI-X [ 25.508787] usbcore: registered new interface driver btusb [ 25.521989] media: Linux media interface: v0.10 [ 25.528447] Linux video capture interface: v2.00 [ 25.532380] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 25.532448] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 25.533383] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 25.533598] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 25.533912] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 25.537845] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 25.537925] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 25.538001] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19 [ 25.546920] sound hdaudioC1D0: autoconfig: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 25.546924] sound hdaudioC1D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 25.546926] sound hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 25.546927] sound hdaudioC1D0: mono: mono_out=0x0 [ 25.546929] sound hdaudioC1D0: inputs: [ 25.546931] sound hdaudioC1D0: Mic=0xc [ 25.546933] sound hdaudioC1D0: Internal Mic=0x11 [ 25.546934] sound hdaudioC1D0: Line=0xf [ 25.560684] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369) [ 25.567953] init: avahi-cups-reload main process (905) terminated with status 1 [ 25.571451] ip_tables: (C) 2000-2006 Netfilter Core Team [ 25.575185] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input20 [ 25.576289] usbcore: registered new interface driver uvcvideo [ 25.576291] USB Video Class driver (1.1.1) [ 25.583154] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21 [ 25.583236] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22 [ 25.583304] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23 [ 25.583514] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24 [ 25.591398] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 25.640074] intel_rapl: Found RAPL domain package [ 25.640078] intel_rapl: Found RAPL domain core [ 25.640080] intel_rapl: Found RAPL domain uncore [ 25.640081] intel_rapl: Found RAPL domain dram [ 25.655419] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 25.667283] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 25.678371] device-mapper: multipath: version 1.7.0 loaded [ 25.760703] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 25.764457] ipt_ULOG: ULOG is deprecated and it will be removed soon, use NFLOG instead [ 25.861623] cfg80211: World regulatory domain updated: [ 25.861627] cfg80211: DFS Master region: unset [ 25.861628] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 25.861631] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 25.861633] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 25.861634] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 25.861636] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 25.861638] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 26.188985] input: HP WMI hotkeys as /devices/virtual/input/input25 [ 26.225225] init: failsafe main process (1188) killed by TERM signal [ 26.371976] init: Failed to spawn dkms main process: unable to execute: No such file or directory [ 26.545782] init: alsa-restore main process (1468) terminated with status 99 [ 26.762618] init: plymouth-upstart-bridge main process ended, respawning [ 26.900689] init: mnp_logger_goobuntu main process (1400) terminated with status 2 [ 26.900697] init: mnp_logger_goobuntu main process ended, respawning [ 27.419844] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input26 [ 30.666059] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 30.666273] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S [ 30.676927] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.177321] init: plymouth-stop pre-start process (2266) terminated with status 1 [ 34.237768] wlan0: authenticate with 6c:f3:7f:b2:90:40 [ 34.240564] wlan0: send auth to 6c:f3:7f:b2:90:40 (try 1/3) [ 34.242109] wlan0: authenticated [ 34.245480] wlan0: associate with 6c:f3:7f:b2:90:40 (try 1/3) [ 34.247892] wlan0: RX AssocResp from 6c:f3:7f:b2:90:40 (capab=0x431 status=0 aid=2) [ 34.248446] wlan0: associated [ 34.248466] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 34.248528] cfg80211: Calling CRDA for country: CH [ 34.250558] cfg80211: Regulatory domain changed to country: CH [ 34.250561] cfg80211: DFS Master region: unset [ 34.250562] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 34.250564] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 34.250566] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 34.250567] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s) [ 34.250568] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm), (0 s) [ 34.250569] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 34.581397] [UFW BLOCK] IN= OUT=wlan0 SRC=172.16.120.51 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 35.261140] [UFW BLOCK] IN= OUT=wlan0 SRC=172.16.120.51 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 36.702102] Netfilter messages via NETLINK v0.30. [ 50.836481] [UFW BLOCK] IN= OUT=wlan0 SRC=172.16.120.51 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 MARK=0x200a [ 59.536526] [UFW BLOCK] IN=wlan0 OUT= MAC=ff:ff:ff:ff:ff:ff:a8:fa:d8:8d:bf:4a:08:00 SRC=172.16.120.156 DST=172.16.120.255 LEN=72 TOS=0x00 PREC=0x00 TTL=64 ID=47303 PROTO=UDP SPT=57621 DPT=57621 LEN=52 MARK=0x5 [ 89.528935] [UFW BLOCK] IN=wlan0 OUT= MAC=ff:ff:ff:ff:ff:ff:a8:fa:d8:8d:bf:4a:08:00 SRC=172.16.120.156 DST=172.16.120.255 LEN=72 TOS=0x00 PREC=0x00 TTL=64 ID=15735 PROTO=UDP SPT=57621 DPT=57621 LEN=52 MARK=0x5 [ 115.916289] [UFW BLOCK] IN= OUT=wlan0 SRC=172.16.120.51 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 MARK=0x200a [ 119.522016] [UFW BLOCK] IN=wlan0 OUT= MAC=ff:ff:ff:ff:ff:ff:a8:fa:d8:8d:bf:4a:08:00 SRC=172.16.120.156 DST=172.16.120.255 LEN=72 TOS=0x00 PREC=0x00 TTL=64 ID=23183 PROTO=UDP SPT=57621 DPT=57621 LEN=52 MARK=0x5 [ 153.609453] [UFW BLOCK] IN=wlan0 OUT= MAC=ff:ff:ff:ff:ff:ff:a8:fa:d8:8d:bf:4a:08:00 SRC=172.16.120.156 DST=172.16.120.255 LEN=72 TOS=0x00 PREC=0x00 TTL=64 ID=26133 PROTO=UDP SPT=57621 DPT=57621 LEN=52 MARK=0x5 [ 179.444959] [UFW BLOCK] IN= OUT=wlan0 SRC=172.16.120.51 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 MARK=0x200a [ 185.035909] [UFW BLOCK] IN=wlan0 OUT= MAC=ff:ff:ff:ff:ff:ff:a8:fa:d8:8d:bf:4a:08:00 SRC=172.16.120.156 DST=172.16.120.255 LEN=72 TOS=0x00 PREC=0x00 TTL=64 ID=11186 PROTO=UDP SPT=57621 DPT=57621 LEN=52 MARK=0x5