[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.0.0-rc1+ (vivijim@rdvivi-talin) (gcc version 4.9.2 20141101 (Red Hat 4.9.2-1) (GCC) ) #69 SMP Thu Feb 26 16:18:50 PST 2015
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.0.0-rc1+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rd.luks.uuid=luks-bb84aed4-fb17-49b0-82cd-6d738ff09168 rhgb quiet drm.debug=0xe LANG=en_US.UTF-8 i915.enable_ips=0 i915.enable_execlists=0 i915.enable_ppgtt=1
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x0000000000087fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094089fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009408a000-0x0000000094989fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009498a000-0x000000009c48efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009c48f000-0x000000009ce7efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x93075018-0x93085057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x0000000000087fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000088000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000093075017] usable
[    0.000000] reserve setup_data: [mem 0x0000000093075018-0x0000000093085057] usable
[    0.000000] reserve setup_data: [mem 0x0000000093085058-0x0000000094089fff] usable
[    0.000000] reserve setup_data: [mem 0x000000009408a000-0x0000000094989fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009498a000-0x000000009c48efff] usable
[    0.000000] reserve setup_data: [mem 0x000000009c48f000-0x000000009ce7efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000025effffff] usable
[    0.000000] efi: EFI v2.40 by INSYDE Corp.
[    0.000000] efi:  SMBIOS=0x9c708000  ACPI 2.0=0x9cffe014 
[    0.000000] efi: mem00: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[    0.000000] efi: mem01: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000002000) (0MB)
[    0.000000] efi: mem02: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000002000-0x000000000000e000) (0MB)
[    0.000000] efi: mem03: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000000000e000-0x0000000000010000) (0MB)
[    0.000000] efi: mem04: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000010000-0x0000000000038000) (0MB)
[    0.000000] efi: mem05: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000038000-0x0000000000058000) (0MB)
[    0.000000] efi: mem06: [Reserved           |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[    0.000000] efi: mem07: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000005e000) (0MB)
[    0.000000] efi: mem08: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000000005e000-0x000000000005f000) (0MB)
[    0.000000] efi: mem09: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000000005f000-0x0000000000060000) (0MB)
[    0.000000] efi: mem10: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000060000-0x0000000000088000) (0MB)
[    0.000000] efi: mem11: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
[    0.000000] efi: mem12: [Reserved           |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[    0.000000] efi: mem13: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000c00000) (11MB)
[    0.000000] efi: mem14: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000c00000-0x0000000001000000) (4MB)
[    0.000000] efi: mem15: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000001000000-0x00000000022c8000) (18MB)
[    0.000000] efi: mem16: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000022c8000-0x0000000010000000) (221MB)
[    0.000000] efi: mem17: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000010000000-0x000000001000b000) (0MB)
[    0.000000] efi: mem18: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x000000001000b000-0x000000003de27000) (734MB)
[    0.000000] efi: mem19: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000003de27000-0x0000000040000000) (33MB)
[    0.000000] efi: mem20: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000040000000-0x000000006b01b000) (688MB)
[    0.000000] efi: mem21: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000006b01b000-0x000000009095e000) (601MB)
[    0.000000] efi: mem22: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009095e000-0x000000009097e000) (0MB)
[    0.000000] efi: mem23: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009097e000-0x0000000093075000) (38MB)
[    0.000000] efi: mem24: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000093075000-0x000000009328e000) (2MB)
[    0.000000] efi: mem25: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009328e000-0x000000009408a000) (13MB)
[    0.000000] efi: mem26: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009408a000-0x000000009498a000) (9MB)
[    0.000000] efi: mem27: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009498a000-0x0000000094990000) (0MB)
[    0.000000] efi: mem28: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000094990000-0x000000009499b000) (0MB)
[    0.000000] efi: mem29: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009499b000-0x000000009499f000) (0MB)
[    0.000000] efi: mem30: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009499f000-0x0000000094a78000) (0MB)
[    0.000000] efi: mem31: [Loader Code        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000094a78000-0x0000000094b9f000) (1MB)
[    0.000000] efi: mem32: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000094b9f000-0x00000000979c4000) (46MB)
[    0.000000] efi: mem33: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000979c4000-0x0000000097c7f000) (2MB)
[    0.000000] efi: mem34: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097c7f000-0x0000000097d17000) (0MB)
[    0.000000] efi: mem35: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097d17000-0x0000000097dad000) (0MB)
[    0.000000] efi: mem36: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097dad000-0x0000000097db2000) (0MB)
[    0.000000] efi: mem37: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097db2000-0x0000000097ed6000) (1MB)
[    0.000000] efi: mem38: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097ed6000-0x0000000097f11000) (0MB)
[    0.000000] efi: mem39: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097f11000-0x0000000097f1a000) (0MB)
[    0.000000] efi: mem40: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097f1a000-0x0000000097f40000) (0MB)
[    0.000000] efi: mem41: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097f40000-0x0000000097f41000) (0MB)
[    0.000000] efi: mem42: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097f41000-0x0000000097f6c000) (0MB)
[    0.000000] efi: mem43: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097f6c000-0x0000000097f75000) (0MB)
[    0.000000] efi: mem44: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097f75000-0x0000000097f76000) (0MB)
[    0.000000] efi: mem45: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097f76000-0x0000000097fb3000) (0MB)
[    0.000000] efi: mem46: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097fb3000-0x0000000097fb5000) (0MB)
[    0.000000] efi: mem47: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097fb5000-0x0000000097fb6000) (0MB)
[    0.000000] efi: mem48: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097fb6000-0x0000000097fc0000) (0MB)
[    0.000000] efi: mem49: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097fc0000-0x0000000097fc4000) (0MB)
[    0.000000] efi: mem50: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097fc4000-0x0000000097fc8000) (0MB)
[    0.000000] efi: mem51: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097fc8000-0x0000000097fc9000) (0MB)
[    0.000000] efi: mem52: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000097fc9000-0x00000000980f2000) (1MB)
[    0.000000] efi: mem53: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000980f2000-0x0000000098910000) (8MB)
[    0.000000] efi: mem54: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098910000-0x00000000989aa000) (0MB)
[    0.000000] efi: mem55: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000989aa000-0x00000000989ac000) (0MB)
[    0.000000] efi: mem56: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000989ac000-0x00000000989ad000) (0MB)
[    0.000000] efi: mem57: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000989ad000-0x00000000989b3000) (0MB)
[    0.000000] efi: mem58: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000989b3000-0x0000000098a2c000) (0MB)
[    0.000000] efi: mem59: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098a2c000-0x0000000098a35000) (0MB)
[    0.000000] efi: mem60: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098a35000-0x0000000098a8a000) (0MB)
[    0.000000] efi: mem61: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098a8a000-0x0000000098a8c000) (0MB)
[    0.000000] efi: mem62: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098a8c000-0x0000000098a8d000) (0MB)
[    0.000000] efi: mem63: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098a8d000-0x0000000098a8f000) (0MB)
[    0.000000] efi: mem64: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098a8f000-0x0000000098abf000) (0MB)
[    0.000000] efi: mem65: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098abf000-0x0000000098ac2000) (0MB)
[    0.000000] efi: mem66: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098ac2000-0x0000000098b11000) (0MB)
[    0.000000] efi: mem67: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b11000-0x0000000098b12000) (0MB)
[    0.000000] efi: mem68: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b12000-0x0000000098b69000) (0MB)
[    0.000000] efi: mem69: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b69000-0x0000000098b6e000) (0MB)
[    0.000000] efi: mem70: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b6e000-0x0000000098b71000) (0MB)
[    0.000000] efi: mem71: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b71000-0x0000000098b72000) (0MB)
[    0.000000] efi: mem72: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b72000-0x0000000098b91000) (0MB)
[    0.000000] efi: mem73: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b91000-0x0000000098b92000) (0MB)
[    0.000000] efi: mem74: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b92000-0x0000000098b93000) (0MB)
[    0.000000] efi: mem75: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b93000-0x0000000098b94000) (0MB)
[    0.000000] efi: mem76: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b94000-0x0000000098b96000) (0MB)
[    0.000000] efi: mem77: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b96000-0x0000000098b97000) (0MB)
[    0.000000] efi: mem78: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098b97000-0x0000000098ba9000) (0MB)
[    0.000000] efi: mem79: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000098ba9000-0x000000009ba8f000) (46MB)
[    0.000000] efi: mem80: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009ba8f000-0x000000009c062000) (5MB)
[    0.000000] efi: mem81: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009c062000-0x000000009c48f000) (4MB)
[    0.000000] efi: mem82: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x000000009c48f000-0x000000009c68f000) (2MB)
[    0.000000] efi: mem83: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x000000009c68f000-0x000000009c98f000) (3MB)
[    0.000000] efi: mem84: [Reserved           |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009c98f000-0x000000009ce7f000) (4MB)
[    0.000000] efi: mem85: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009ce7f000-0x000000009cf7f000) (1MB)
[    0.000000] efi: mem86: [ACPI Reclaim Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009cf7f000-0x000000009cfff000) (0MB)
[    0.000000] efi: mem87: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
[    0.000000] efi: mem88: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000100000000-0x000000025f000000) (5616MB)
[    0.000000] efi: mem89: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[    0.000000] efi: mem90: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[    0.000000] efi: mem91: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[    0.000000] efi: mem92: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[    0.000000] efi: mem93: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[    0.000000] efi: mem94: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[    0.000000] efi: mem95: [Memory Mapped I/O  |RUN|  |  |  |   |  |  |  |UC] range=[0x00000000ffa00000-0x0000000100000000) (6MB)
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 80HE/VIUU4, BIOS A6CN38WW 09/30/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7C00000000 write-back
[    0.000000]   1 base 009D000000 mask 7FFF000000 uncachable
[    0.000000]   2 base 009E000000 mask 7FFE000000 uncachable
[    0.000000]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   4 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000032000] 32000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x02004000, 0x02004fff] PGTABLE
[    0.000000] BRK [0x02005000, 0x02005fff] PGTABLE
[    0.000000] BRK [0x02006000, 0x02006fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x25ee00000-0x25effffff]
[    0.000000]  [mem 0x25ee00000-0x25effffff] page 2M
[    0.000000] BRK [0x02007000, 0x02007fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x240000000-0x25edfffff]
[    0.000000]  [mem 0x240000000-0x25edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x220000000-0x23fffffff]
[    0.000000]  [mem 0x220000000-0x23fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0x94089fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0x93ffffff] page 2M
[    0.000000]  [mem 0x94000000-0x94089fff] page 4k
[    0.000000] init_memory_mapping: [mem 0x9498a000-0x9c48efff]
[    0.000000]  [mem 0x9498a000-0x949fffff] page 4k
[    0.000000]  [mem 0x94a00000-0x9c3fffff] page 2M
[    0.000000]  [mem 0x9c400000-0x9c48efff] page 4k
[    0.000000] BRK [0x02008000, 0x02008fff] PGTABLE
[    0.000000] BRK [0x02009000, 0x02009fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[    0.000000]  [mem 0x9cfff000-0x9cffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[    0.000000]  [mem 0x100000000-0x21fffffff] page 1G
[    0.000000] RAMDISK: [mem 0x3de27000-0x3fffafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x000000009CFCB188 0000DC (v01 LENOVO CB-01    00000001      01000013)
[    0.000000] ACPI: FACP 0x000000009CFF0000 00010C (v05 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x000000009CFDB000 00FFA6 (v02 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FACS 0x000000009CF7A000 000040
[    0.000000] ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x000000009CFF5000 000055 (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x000000009CFF3000 000034 (v07 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x000000009CFF1000 000034 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: LPIT 0x000000009CFEE000 000094 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x000000009CFEC000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD6000 00067E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD5000 000473 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFCE000 005AFC (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFF6000 005FD2 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x000000009CFF2000 000028 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x000000009CFED000 00008C (v03 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD7000 00340B (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x000000009CFD4000 000B74 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x000000009CFF4000 0000A5 (v32 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x000000009CFEB000 000224 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x000000009CFEF000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: DMAR 0x000000009CFCD000 0000CC (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: CSRT 0x000000009CFCC000 0000C4 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x000000009CFCA000 000044 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: BGRT 0x000000009CFC9000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x25efe9000-0x25effcfff]
[    0.000000]  [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256600000-ffff88025e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x0000000000087fff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000094089fff]
[    0.000000]   node   0: [mem 0x000000009498a000-0x000000009c48efff]
[    0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
[    0.000000] On node 0 totalpages: 2075414
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 1119 pages reserved
[    0.000000]   DMA zone: 3974 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 9903 pages used for memmap
[    0.000000]   DMA32 zone: 633744 pages, LIFO batch:31
[    0.000000]   Normal zone: 22464 pages used for memmap
[    0.000000]   Normal zone: 1437696 pages, LIFO batch:31
[    0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[    0.000000] Reserving Intel graphics stolen memory at 0x9e000000-0x9fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x93075000-0x93075fff]
[    0.000000] PM: Registered nosave memory: [mem 0x93085000-0x93085fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9408a000-0x94989fff]
[    0.000000] PM: Registered nosave memory: [mem 0x9c48f000-0x9ce7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[    0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[    0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9dffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88025ec00000 s92632 r8192 d30248 u262144
[    0.000000] pcpu-alloc: s92632 r8192 d30248 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2041864
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.0.0-rc1+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root rd.luks.uuid=luks-bb84aed4-fb17-49b0-82cd-6d738ff09168 rhgb quiet drm.debug=0xe LANG=en_US.UTF-8 i915.enable_ips=0 i915.enable_execlists=0 i915.enable_ppgtt=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] Memory: 7967372K/8301656K available (7521K kernel code, 1153K rwdata, 3280K rodata, 1476K init, 1444K bss, 334284K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:760 16
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1296.951 MHz processor
[    0.000053] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.90 BogoMIPS (lpj=1296951)
[    0.000058] pid_max: default: 32768 minimum: 301
[    0.000067] ACPI: Core revision 20150204
[    0.034872] ACPI: All ACPI Tables successfully acquired
[    0.039153] Security Framework initialized
[    0.039165] SELinux:  Initializing.
[    0.039177] SELinux:  Starting in permissive mode
[    0.040231] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.043177] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.044423] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.044442] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.044776] Initializing cgroup subsys blkio
[    0.044780] Initializing cgroup subsys devices
[    0.044783] Initializing cgroup subsys freezer
[    0.044787] Initializing cgroup subsys net_cls
[    0.044790] Initializing cgroup subsys perf_event
[    0.044793] Initializing cgroup subsys net_prio
[    0.044833] CPU: Physical Processor ID: 0
[    0.044835] CPU: Processor Core ID: 0
[    0.044842] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.044843] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.046574] mce: CPU supports 7 MCE banks
[    0.046596] CPU0: Thermal monitoring enabled (TM1)
[    0.046613] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.046615] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.047288] Freeing SMP alternatives memory: 24K (ffffffff81e93000 - ffffffff81e99000)
[    0.048767] Ignoring BGRT: invalid status 0 (expected 1)
[    0.054106] ftrace: allocating 27227 entries in 107 pages
[    0.074743] dmar: Host address width 39
[    0.074747] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[    0.074757] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.074760] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[    0.074771] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.074773] dmar: RMRR base: 0x0000009ce26000 end: 0x0000009ce45fff
[    0.074776] dmar: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
[    0.074779] dmar: ANDD device: 1 name: \_SB.PCI0.SDMA
[    0.074782] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.074784] HPET id 0 under DRHD base 0xfed91000
[    0.075285] Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
[    0.075309] Enabled IRQ remapping in xapic mode
[    0.075311] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.076043] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.086062] TSC deadline timer enabled
[    0.086067] smpboot: CPU0: Intel(R) Processor 5Y70 CPU @ 1.10GHz (fam: 06, model: 3d, stepping: 04)
[    0.086106] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
[    0.086115] ... version:                3
[    0.086117] ... bit width:              48
[    0.086118] ... generic registers:      4
[    0.086120] ... value mask:             0000ffffffffffff
[    0.086122] ... max period:             0000ffffffffffff
[    0.086124] ... fixed-purpose events:   3
[    0.086125] ... event mask:             000000070000000f
[    0.087416] x86: Booting SMP configuration:
[    0.087418] .... node  #0, CPUs:      #1
[    0.102488] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.102625]  #2 #3
[    0.132936] x86: Booted up 1 node, 4 CPUs
[    0.132941] smpboot: Total of 4 processors activated (10375.60 BogoMIPS)
[    0.141175] devtmpfs: initialized
[    0.146361] PM: Registering ACPI NVS region [mem 0x9408a000-0x94989fff] (9437184 bytes)
[    0.146556] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[    0.146846] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.146850] pinctrl core: initialized pinctrl subsystem
[    0.146910] RTC time: 19:44:25, date: 03/03/15
[    0.147106] NET: Registered protocol family 16
[    0.153833] cpuidle: using governor menu
[    0.153988] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.153991] ACPI: bus type PCI registered
[    0.153993] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.154100] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.154104] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.154648] PCI: Using configuration type 1 for base access
[    0.162441] ACPI: Added _OSI(Module Device)
[    0.162445] ACPI: Added _OSI(Processor Device)
[    0.162447] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.162449] ACPI: Added _OSI(Processor Aggregator Device)
[    0.172255] ACPI: Executed 16 blocks of module-level executable AML code
[    0.182385] ACPI: Dynamic OEM Table Load:
[    0.182406] ACPI: SSDT 0xFFFF880254809800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20121220)
[    0.183981] ACPI: Dynamic OEM Table Load:
[    0.184000] ACPI: SSDT 0xFFFF880254DD2000 0005AA (v01 PmRef  ApIst    00003000 INTL 20121220)
[    0.185655] ACPI: Dynamic OEM Table Load:
[    0.185670] ACPI: SSDT 0xFFFF880254802C00 000119 (v01 PmRef  ApCst    00003000 INTL 20121220)
[    0.196670] ACPI: Interpreter enabled
[    0.196685] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[    0.196698] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[    0.196737] ACPI: (supports S0 S3 S4 S5)
[    0.196739] ACPI: Using IOAPIC for interrupt routing
[    0.196788] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.197607] ACPI: Power Resource [PG00] (on)
[    0.198311] ACPI: Power Resource [PG01] (on)
[    0.198987] ACPI: Power Resource [PG02] (on)
[    0.214551] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[    0.217094] ACPI: Power Resource [FN00] (off)
[    0.217217] ACPI: Power Resource [FN01] (off)
[    0.217335] ACPI: Power Resource [FN02] (off)
[    0.217450] ACPI: Power Resource [FN03] (off)
[    0.217567] ACPI: Power Resource [FN04] (off)
[    0.219115] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.219125] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.220555] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.221877] PCI host bridge to bus 0000:00
[    0.221883] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.221886] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.221889] pci_bus 0000:00: root bus resource [io  0x0cf8-0x0cff]
[    0.221892] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.221895] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.221898] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
[    0.221911] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.222355] pci 0000:00:02.0: [8086:161e] type 00 class 0x030000
[    0.222377] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.222389] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.222398] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.222826] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.222842] pci 0000:00:03.0: reg 0x10: [mem 0xc1318000-0xc131bfff 64bit]
[    0.223295] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[    0.223317] pci 0000:00:04.0: reg 0x10: [mem 0xc1310000-0xc1317fff 64bit]
[    0.223778] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.223804] pci 0000:00:14.0: reg 0x10: [mem 0xc1300000-0xc130ffff 64bit]
[    0.223894] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.224249] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.224313] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.224340] pci 0000:00:16.0: reg 0x10: [mem 0xc1321000-0xc132101f 64bit]
[    0.224441] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.224844] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.224869] pci 0000:00:1b.0: reg 0x10: [mem 0xc131c000-0xc131ffff 64bit]
[    0.224960] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.225311] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.225370] pci 0000:00:1c.0: [8086:9c94] type 01 class 0x060400
[    0.225485] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.225828] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.225901] pci 0000:00:1f.0: [8086:9cc7] type 00 class 0x060100
[    0.226431] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.226452] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
[    0.226462] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
[    0.226475] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
[    0.226485] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
[    0.226494] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.226506] pci 0000:00:1f.2: reg 0x24: [mem 0xc1324000-0xc13247ff]
[    0.226564] pci 0000:00:1f.2: PME# supported from D3hot
[    0.226949] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.226968] pci 0000:00:1f.3: reg 0x10: [mem 0xc1320000-0xc13200ff 64bit]
[    0.226996] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.227416] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.227454] pci 0000:00:1f.6: reg 0x10: [mem 0xc1323000-0xc1323fff 64bit]
[    0.228110] pci 0000:01:00.0: [14e4:43b1] type 00 class 0x028000
[    0.228153] pci 0000:01:00.0: reg 0x10: [mem 0xc1200000-0xc1207fff 64bit]
[    0.228183] pci 0000:01:00.0: reg 0x18: [mem 0xc1000000-0xc11fffff 64bit]
[    0.228386] pci 0000:01:00.0: supports D1 D2
[    0.228389] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.228446] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.231102] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.231110] pci 0000:00:1c.0:   bridge window [mem 0xc1000000-0xc12fffff]
[    0.231163] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[    0.234501] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.234578] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.234651] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.234726] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.234799] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.234871] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.234943] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.235014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.235794] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.236155] ACPI : EC: GPE = 0x34, I/O: command/status = 0x66, data = 0x62
[    0.236312] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.236315] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.236319] vgaarb: loaded
[    0.236321] vgaarb: bridge control possible 0000:00:02.0
[    0.236479] SCSI subsystem initialized
[    0.236536] libata version 3.00 loaded.
[    0.236584] ACPI: bus type USB registered
[    0.236612] usbcore: registered new interface driver usbfs
[    0.236631] usbcore: registered new interface driver hub
[    0.236657] usbcore: registered new device driver usb
[    0.236846] PCI: Using ACPI for IRQ routing
[    0.244763] PCI: pci_cache_line_size set to 64 bytes
[    0.244807] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.244810] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.244812] e820: reserve RAM buffer [mem 0x93075018-0x93ffffff]
[    0.244814] e820: reserve RAM buffer [mem 0x9408a000-0x97ffffff]
[    0.244816] e820: reserve RAM buffer [mem 0x9c48f000-0x9fffffff]
[    0.244819] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[    0.244821] e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
[    0.245021] NetLabel: Initializing
[    0.245023] NetLabel:  domain hash size = 128
[    0.245024] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.245044] NetLabel:  unlabeled traffic allowed by default
[    0.245167] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.245175] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.247221] Switched to clocksource hpet
[    0.257261] pnp: PnP ACPI init
[    0.257569] system 00:00: [io  0x06a4] has been reserved
[    0.257574] system 00:00: [io  0x06a0] has been reserved
[    0.257580] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.257936] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.257940] system 00:01: [io  0xffff] has been reserved
[    0.257944] system 00:01: [io  0xffff] has been reserved
[    0.257947] system 00:01: [io  0xffff] has been reserved
[    0.257951] system 00:01: [io  0x1800-0x18fe] could not be reserved
[    0.257955] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.257959] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.258041] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.258104] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.258109] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.258160] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.258957] system 00:05: [mem 0xfe102000-0xfe102fff] has been reserved
[    0.258961] system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
[    0.258965] system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
[    0.258969] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.259655] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.259659] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.259663] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.259666] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.259670] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.259674] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.259678] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.259681] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.259685] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[    0.259689] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.259692] system 00:06: [mem 0xa0010000-0xa001ffff] has been reserved
[    0.259695] system 00:06: [mem 0xa0000000-0xa000ffff] has been reserved
[    0.259700] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.260371] pnp: PnP ACPI: found 7 devices
[    0.267682] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.267691] pci 0000:00:1c.0:   bridge window [mem 0xc1000000-0xc12fffff]
[    0.267702] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.267705] pci_bus 0000:00: resource 5 [io  0x0cf8-0x0cff]
[    0.267708] pci_bus 0000:00: resource 6 [io  0x0d00-0xffff window]
[    0.267711] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
[    0.267714] pci_bus 0000:00: resource 8 [mem 0xa0000000-0xfeafffff window]
[    0.267717] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc12fffff]
[    0.267784] NET: Registered protocol family 2
[    0.268102] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.268364] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.268553] TCP: Hash tables configured (established 65536 bind 65536)
[    0.268582] TCP: reno registered
[    0.268602] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.268646] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.268749] NET: Registered protocol family 1
[    0.268770] pci 0000:00:02.0: Video device with shadowed ROM
[    0.268907] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.268910] pci 0000:00:14.0: PCI INT A: no GSI
[    0.270272] PCI: CLS 64 bytes, default 64
[    0.270344] Unpacking initramfs...
[    1.283742] Freeing initrd memory: 34640K (ffff88003de27000 - ffff88003fffb000)
[    1.283817] dmar: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
[    1.283833] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.283837] software IO TLB [mem 0x8c95e000-0x9095e000] (64MB) mapped at [ffff88008c95e000-ffff88009095dfff]
[    1.283967] Simple Boot Flag at 0x44 set to 0x1
[    1.284291] microcode: CPU0 sig=0x306d4, pf=0x80, revision=0xe
[    1.284304] microcode: CPU1 sig=0x306d4, pf=0x80, revision=0xe
[    1.284313] microcode: CPU2 sig=0x306d4, pf=0x80, revision=0xe
[    1.284323] microcode: CPU3 sig=0x306d4, pf=0x80, revision=0xe
[    1.284397] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.284944] AVX2 version of gcm_enc/dec engaged.
[    1.284946] AES CTR mode by8 optimization enabled
[    1.288342] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[    1.289022] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.289056] Initialise system trusted keyring
[    1.289091] audit: initializing netlink subsys (disabled)
[    1.289114] audit: type=2000 audit(1425411865.267:1): initialized
[    1.289591] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.291922] zpool: loaded
[    1.292195] VFS: Disk quotas dquot_6.5.2
[    1.292252] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.292933] Key type big_key registered
[    1.292940] SELinux:  Registering netfilter hooks
[    1.294249] alg: No test for stdrng (krng)
[    1.294263] NET: Registered protocol family 38
[    1.294271] Key type asymmetric registered
[    1.294275] Asymmetric key parser 'x509' registered
[    1.294335] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.294388] io scheduler noop registered
[    1.294392] io scheduler deadline registered
[    1.294449] io scheduler cfq registered (default)
[    1.294902] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    1.294906] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.294911] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    1.294921] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.294947] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.294994] efifb: probing for efifb
[    1.295056] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90010f00000, using 22500k, total 22500k
[    1.295059] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[    1.295060] efifb: scrolling: redraw
[    1.295063] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.316735] Console: switching to colour frame buffer device 400x112
[    1.337323] fb0: EFI VGA frame buffer device
[    1.337338] intel_idle: MWAIT substates: 0x11142120
[    1.337341] intel_idle: v0.4 model 0x3D
[    1.337342] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.337819] ACPI: AC Adapter [ADP1] (on-line)
[    1.338021] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.338063] ACPI: Lid Switch [LID0]
[    1.338120] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.338125] ACPI: Power Button [PWRB]
[    1.338174] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.338178] ACPI: Sleep Button [SLPB]
[    1.338231] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.338234] ACPI: Power Button [PWRF]
[    1.339350] thermal LNXTHERM:00: registered as thermal_zone0
[    1.339354] ACPI: Thermal Zone [TZ00] (28 C)
[    1.339524] thermal LNXTHERM:01: registered as thermal_zone1
[    1.339526] ACPI: Thermal Zone [TZ01] (30 C)
[    1.339609] GHES: HEST is not enabled!
[    1.339741] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.286541] tsc: Refined TSC clocksource calibration: 1296.997 MHz
[    3.287336] Switched to clocksource tsc
[    3.849295] Non-volatile memory driver v1.3
[    3.849386] Linux agpgart interface v0.103
[    3.849687] ahci 0000:00:1f.2: version 3.0
[    3.849905] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    3.849911] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    3.850208] scsi host0: ahci
[    3.850291] ata1: SATA max UDMA/133 abar m2048@0xc1324000 port 0xc1324100 irq 43
[    3.850437] libphy: Fixed MDIO Bus: probed
[    3.850697] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    3.850701] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    3.850728] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.850839] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.850952] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00001810
[    3.850964] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    3.851066] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.851068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.851071] usb usb1: Product: xHCI Host Controller
[    3.851073] usb usb1: Manufacturer: Linux 4.0.0-rc1+ xhci-hcd
[    3.851076] usb usb1: SerialNumber: 0000:00:14.0
[    3.851293] hub 1-0:1.0: USB hub found
[    3.851307] hub 1-0:1.0: 11 ports detected
[    3.852911] ACPI: Battery Slot [BAT1] (battery present)
[    3.854784] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.854874] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.854919] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    3.854922] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.854924] usb usb2: Product: xHCI Host Controller
[    3.854927] usb usb2: Manufacturer: Linux 4.0.0-rc1+ xhci-hcd
[    3.854929] usb usb2: SerialNumber: 0000:00:14.0
[    3.855112] hub 2-0:1.0: USB hub found
[    3.855123] hub 2-0:1.0: 4 ports detected
[    3.855830] usb: failed to peer usb2-port4 and usb1-port3 by location (usb2-port4:none) (usb1-port3:usb2-port3)
[    3.855833] usb usb2-port4: failed to peer to usb1-port3 (-16)
[    3.855835] usb: port power management may be unreliable
[    3.855931] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.855941] ehci-pci: EHCI PCI platform driver
[    3.855959] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.855966] ohci-pci: OHCI PCI platform driver
[    3.855982] uhci_hcd: USB Universal Host Controller Interface driver
[    3.856054] usbcore: registered new interface driver usbserial
[    3.856064] usbcore: registered new interface driver usbserial_generic
[    3.856073] usbserial: USB Serial support registered for generic
[    3.856118] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    3.856120] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    3.857569] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.857714] mousedev: PS/2 mouse device common for all mice
[    3.858191] rtc_cmos 00:02: RTC can wake from S4
[    3.858376] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    3.858415] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    3.858515] device-mapper: uevent: version 1.0.3
[    3.858613] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
[    3.858703] Intel P-state driver initializing.
[    3.860018] EFI Variables Facility v0.08 2004-May-17
[    3.871205] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.892487] hidraw: raw HID events driver (C) Jiri Kosina
[    3.892584] usbcore: registered new interface driver usbhid
[    3.892585] usbhid: USB HID core driver
[    3.892628] drop_monitor: Initializing network drop monitor service
[    3.892697] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.892742] TCP: cubic registered
[    3.892744] Initializing XFRM netlink socket
[    3.892856] NET: Registered protocol family 10
[    3.893007] mip6: Mobile IPv6
[    3.893010] NET: Registered protocol family 17
[    3.893401] Loading compiled-in X.509 certificates
[    3.894117] Loaded X.509 cert 'Magrathea: Glacier signing key: 97b745a891c9430fcc725c0832700658d063a4db'
[    3.894126] registered taskstats version 1
[    3.894416]   Magic number: 7:904:747
[    3.894510] rtc_cmos 00:02: setting system clock to 2015-03-03 19:44:28 UTC (1425411868)
[    3.894592] PM: Hibernation image not present or could not be loaded.
[    4.155698] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.157787] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[    4.157996] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[    4.158056] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    4.158060] ata1.00: ATA-9: SAMSUNG MZNTE256HMHP-000L2, EXT26L0Q, max UDMA/133
[    4.158063] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.158490] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
[    4.158760] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    4.158854] ata1.00: configured for UDMA/133
[    4.159180] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZNTE256 6L0Q PQ: 0 ANSI: 5
[    4.159637] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    4.159701] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.159747] sd 0:0:0:0: [sda] Write Protect is off
[    4.159751] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.159804] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.163974]  sda: sda1 sda2 sda3
[    4.164463] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.164885] Freeing unused kernel memory: 1476K (ffffffff81d22000 - ffffffff81e93000)
[    4.164889] Write protecting the kernel read-only data: 12288k
[    4.165262] Freeing unused kernel memory: 660K (ffff88000175b000 - ffff880001800000)
[    4.165514] Freeing unused kernel memory: 816K (ffff880001b34000 - ffff880001c00000)
[    4.177195] usb 2-2: New USB device found, idVendor=0b95, idProduct=1790
[    4.177198] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.177199] usb 2-2: Product: AX88179
[    4.177201] usb 2-2: Manufacturer: ASIX Elec. Corp.
[    4.177202] usb 2-2: SerialNumber: 000000000000C2
[    4.207833] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    4.214165] random: systemd urandom read with 19 bits of entropy available
[    4.374208] usb 1-4: New USB device found, idVendor=0489, idProduct=e07a
[    4.374213] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.374216] usb 1-4: Product: BCM20702A0
[    4.374218] usb 1-4: Manufacturer: Broadcom Corp
[    4.374220] usb 1-4: SerialNumber: B01041F2D77E
[    4.476026] sdhci: Secure Digital Host Controller Interface driver
[    4.476029] sdhci: Copyright(c) Pierre Ossman
[    4.500723] alg: No test for crc32 (crc32-pclmul)
[    4.531868] usb 1-7: new high-speed USB device number 3 using xhci_hcd
[    4.543637] [drm] Initialized drm 1.1.0 20060810
[    4.732432] Setting dangerous option enable_ppgtt - tainting kernel
[    4.733611] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x161e rev=0x08 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
[    4.733627] [drm:intel_detect_pch] Found LynxPoint LP PCH
[    4.733730] [drm] Memory usable by graphics device = 4096M
[    4.733731] [drm:i915_gem_gtt_init] GMADR size = 256M
[    4.733732] [drm:i915_gem_gtt_init] GTT stolen size = 32M
[    4.733733] [drm:i915_gem_gtt_init] ppgtt mode: 1
[    4.733735] checking generic (b0000000 15f9000) vs hw (b0000000 10000000)
[    4.733736] fb: switching to inteldrmfb from EFI VGA
[    4.733764] Console: switching to colour dummy device 80x25
[    4.733903] [drm] Replacing VGA console driver
[    4.734502] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9cf73018
[    4.734508] [drm:intel_opregion_setup] Public ACPI methods supported
[    4.734509] [drm:intel_opregion_setup] SWSCI supported
[    4.739044] usb 1-7: New USB device found, idVendor=5986, idProduct=0535
[    4.739049] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    4.739052] usb 1-7: Product: Lenovo EasyCamera
[    4.739055] usb 1-7: Manufacturer: Generic
[    4.739057] usb 1-7: SerialNumber: 200901010001
[    4.740038] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700583
[    4.740042] [drm:intel_opregion_setup] ASLE supported
[    4.740214] [drm:intel_device_info_runtime_init] slice total: 0
[    4.740217] [drm:intel_device_info_runtime_init] subslice total: 0
[    4.740220] [drm:intel_device_info_runtime_init] subslice per slice: 0
[    4.740223] [drm:intel_device_info_runtime_init] EU total: 0
[    4.740226] [drm:intel_device_info_runtime_init] EU per subslice: 0
[    4.740229] [drm:intel_device_info_runtime_init] has slice power gating: n
[    4.740232] [drm:intel_device_info_runtime_init] has subslice power gating: n
[    4.740237] [drm:intel_device_info_runtime_init] has EU power gating: n
[    4.740240] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.740242] [drm] Driver supports precise vblank timestamp query.
[    4.740245] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
[    4.740248] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
[    4.740251] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[    4.740253] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
[    4.740256] [drm:parse_lfp_panel_data] DRRS supported mode is static
[    4.740259] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[    4.740263] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 0 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x8 0xa
[    4.740265] [drm:parse_lfp_panel_data] VBT initial LVDS value 30033c
[    4.740268] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
[    4.740271] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[    4.740274] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[    4.740276] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[    4.740279] [drm:parse_driver_features] DRRS State Enabled:0
[    4.740282] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
[    4.740284] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
[    4.740287] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
[    4.740289] [drm:parse_ddi_port] VBT HDMI level shift for port C: 15
[    4.740301] [drm:intel_dsm_pci_probe] no _DSM method for intel device
[    4.740309] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at 9e000000
[    4.740313] [drm:intel_display_power_get] enabling always-on
[    4.740314] [drm:intel_display_power_get] enabling display
[    4.740413] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
[    4.740417] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
[    4.740419] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
[    4.740422] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
[    4.740424] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
[    4.740426] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
[    4.740428] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
[    4.740430] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
[    4.740432] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
[    4.740434] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
[    4.740436] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
[    4.740438] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
[    4.740440] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
[    4.740442] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
[    4.740444] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
[    4.740447] [drm:intel_modeset_init] 3 display pipes available.
[    4.740465] [drm:intel_ddi_pll_init] CDCLK running at 450000KHz
[    4.740469] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.740786] [drm:intel_dp_init_connector] Adding eDP connector on port A
[    4.740866] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
[    4.740870] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[    4.740874] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
[    4.740877] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[    4.740882] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
[    4.740993] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[    4.741003] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[    4.741438] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 40 00 00 01 c0 02 00 00 00 1f 0b 00
[    4.741745] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel.
[    4.741747] [drm:intel_dp_get_dpcd] Displayport TPS3 supported
[    4.741756] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
[    4.765095] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[    4.765097] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
[    4.765101] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937
[    4.771064] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: enabled
[    4.771069] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
[    4.771072] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled
[    4.771075] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[    4.771078] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[    4.771084] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: enabled, pipe A
[    4.771087] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
[    4.771090] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: enabled
[    4.771093] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
[    4.771098] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config for pipe A
[    4.771100] [drm:intel_dump_pipe_config] cpu_transcoder: D
[    4.771102] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[    4.771104] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    4.771107] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 350797, link_n: 524288, tu: 64
[    4.771109] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    4.771111] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    4.771113] [drm:intel_dump_pipe_config] requested mode:
[    4.771116] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 3200 0 0 0 1800 0 0 0 0x0 0x0
[    4.771118] [drm:intel_dump_pipe_config] adjusted mode:
[    4.771121] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[    4.771124] [drm:intel_dump_crtc_timings] crtc timings: 361309 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x0 flags: 0xa
[    4.771126] [drm:intel_dump_pipe_config] port clock: 540000
[    4.771128] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[    4.771130] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    4.771132] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x0c800708, enabled
[    4.771134] [drm:intel_dump_pipe_config] ips: 0
[    4.771135] [drm:intel_dump_pipe_config] double wide: 0
[    4.771139] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config for pipe B
[    4.771141] [drm:intel_dump_pipe_config] cpu_transcoder: B
[    4.771143] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[    4.771145] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    4.771147] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    4.771150] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    4.771151] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    4.771153] [drm:intel_dump_pipe_config] requested mode:
[    4.771155] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    4.771157] [drm:intel_dump_pipe_config] adjusted mode:
[    4.771160] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    4.771162] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    4.771164] [drm:intel_dump_pipe_config] port clock: 0
[    4.771166] [drm:intel_dump_pipe_config] pipe src size: 0x0
[    4.771168] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    4.771169] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    4.771171] [drm:intel_dump_pipe_config] ips: 0
[    4.771173] [drm:intel_dump_pipe_config] double wide: 0
[    4.771175] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config for pipe C
[    4.771177] [drm:intel_dump_pipe_config] cpu_transcoder: C
[    4.771179] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[    4.771181] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    4.771183] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    4.771185] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    4.771187] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    4.771188] [drm:intel_dump_pipe_config] requested mode:
[    4.771191] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    4.771192] [drm:intel_dump_pipe_config] adjusted mode:
[    4.771195] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    4.771198] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    4.771199] [drm:intel_dump_pipe_config] port clock: 0
[    4.771201] [drm:intel_dump_pipe_config] pipe src size: 0x0
[    4.771203] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    4.771205] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    4.771206] [drm:intel_dump_pipe_config] ips: 0
[    4.771208] [drm:intel_dump_pipe_config] double wide: 0
[    4.771217] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[    4.771220] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[    4.771223] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[    4.771225] [drm:check_crtc_state] [CRTC:20]
[    4.771234] [drm:check_crtc_state] [CRTC:24]
[    4.771237] [drm:check_crtc_state] [CRTC:28]
[    4.771239] [drm:check_shared_dpll_state] WRPLL 1
[    4.771241] [drm:check_shared_dpll_state] WRPLL 2
[    4.771248] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=3200x1800@32, offset=0, pitch 12800, size 0x15f9000
[    4.771251] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=15f9000
[    4.771257] [drm:i915_pages_create_for_stolen] offset=0x0, size=23040000
[    4.771262] [drm:intel_alloc_plane_obj] plane fb obj ffff88024fd88000
[    4.771266] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 15f9000
[    4.771269] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [15f9000, fffff000]
[    4.775160] [drm:gen8_ppgtt_init] Allocated 4 pages for page directories (0 wasted)
[    4.775162] [drm:gen8_ppgtt_init] Allocated 2048 pages for page tables (0 wasted)
[    4.775201] [drm:i915_gem_context_init] HW context support initialized
[    4.775207] [drm:init_status_page] render ring hws offset: 0x0160b000
[    4.775253] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0162c000
[    4.775257] [drm:init_status_page] bsd ring hws offset: 0x0162d000
[    4.775295] [drm:init_status_page] blitter ring hws offset: 0x0164e000
[    4.775329] [drm:init_status_page] video enhancement ring hws offset: 0x0166f000
[    4.775430] [drm:intel_ring_workarounds_emit] Number of Workarounds emitted: 7
[    4.775667] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
[    4.775701] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
[    4.775704] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[    4.776037] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[    4.776346] [drm:intel_dp_probe_oui] Branch OUI: 000000
[    4.776350] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] status updated from 3 to 1
[    4.776360] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[    4.776363] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
[    4.776365] [drm:drm_mode_debug_printmodeline] Modeline 32:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    4.776367] [drm:drm_mode_debug_printmodeline] Modeline 33:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
[    4.776368] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
[    4.776369] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[    4.776534] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    4.776536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[    4.776538] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] status updated from 3 to 2
[    4.776540] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
[    4.776542] [drm:drm_setup_crtcs] 
[    4.776543] [drm:drm_enable_connectors] connector 31 enabled? yes
[    4.776544] [drm:drm_enable_connectors] connector 40 enabled? no
[    4.776546] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
[    4.776547] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
[    4.776548] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:20]: 3200x1800
[    4.776549] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[    4.776551] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 20 (0,0)
[    4.776552] [drm:intelfb_create] no BIOS fb, allocating a new one
[    4.776554] [drm:i915_gem_object_create_stolen] creating stolen object: size=15f9000
[    4.777670] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.777815] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    4.777920] [drm] Initialized i915 1.6.0 20150214 for 0000:00:02.0 on minor 0
[    4.790457] [drm:intelfb_create] allocated 3200x1800 fb: 0x01691000, bo ffff88024dd14000
[    4.790531] fbcon: inteldrmfb (fb0) is primary device
[    4.790572] [drm:intel_fbdev_set_par] PSR FBDEV modeset
[    4.790590] [drm:intel_fbc_update] disabled per chip default
[    4.790602] [drm:intel_crtc_set_config] [CRTC:20] [FB:44] #connectors=1 (x y) (0 0)
[    4.790603] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[    4.790605] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    4.790606] [drm:drm_mode_debug_printmodeline] Modeline 43:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    4.790607] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=1
[    4.790608] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    4.790609] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    4.790610] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[    4.790612] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[    4.790616] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[    4.790616] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[    4.790617] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[    4.790620] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[    4.790620] [drm:intel_dump_pipe_config] cpu_transcoder: D
[    4.790621] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[    4.790621] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    4.790622] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[    4.790623] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    4.790624] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    4.790624] [drm:intel_dump_pipe_config] requested mode:
[    4.790625] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    4.790626] [drm:intel_dump_pipe_config] adjusted mode:
[    4.790627] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    4.790628] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[    4.790628] [drm:intel_dump_pipe_config] port clock: 540000
[    4.790629] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[    4.790629] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    4.790630] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    4.790630] [drm:intel_dump_pipe_config] ips: 0
[    4.790631] [drm:intel_dump_pipe_config] double wide: 0
[    4.790634] [drm:intel_crtc_disable_planes] PSR FBDEV crtc disable planes flush fb bits
[    4.792042] [drm:intel_edp_backlight_off] 
[    4.806608] ax88179_178a 2-2:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-2, ASIX AX88179 USB 3.0 Gigabit Ethernet, 9c:eb:e8:10:58:6c
[    4.806640] usbcore: registered new interface driver ax88179_178a
[    4.807652] ax88179_178a 2-2:1.0 enp0s20u2: renamed from eth0
[    4.898168] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[    4.993198] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[    4.999395] [drm:edp_panel_off] Turn eDP port A panel power off
[    4.999399] [drm:wait_panel_off] Wait for panel power off time
[    4.999404] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[    5.054284] [drm:wait_panel_status] Wait complete
[    5.054299] [drm:intel_display_power_put] disabling display
[    5.054301] [drm:hsw_set_power_well] Requesting to disable the power well
[    5.054323] [drm:__intel_set_mode] PSR FBDEV crtc enable planes
[    5.054341] [drm:edp_panel_on] Turn eDP port A panel power on
[    5.054343] [drm:wait_panel_power_cycle] Wait for panel power cycle
[    5.076199] usb 1-8: New USB device found, idVendor=048d, idProduct=8386
[    5.076201] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.076203] usb 1-8: Product: ITE Device(8386)
[    5.076205] usb 1-8: Manufacturer: ITE Tech. Inc.
[    5.600646] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
[    5.611657] [drm:wait_panel_status] Wait complete
[    5.611662] [drm:wait_panel_on] Wait for panel power on
[    5.611666] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[    5.820757] [drm:wait_panel_status] Wait complete
[    5.820766] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[    5.820774] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[    5.821858] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[    5.822484] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[    5.823083] [drm:intel_dp_start_link_train] clock recovery OK
[    5.823990] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
[    5.824888] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[    5.825123] [drm:intel_edp_backlight_on] 
[    5.825124] [drm:intel_panel_enable_backlight] pipe A
[    5.825129] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[    5.825283] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[    5.826757] [drm:haswell_crtc_enable] PSR FBDEV crtc enable planes
[    5.826765] [drm:ironlake_update_primary_plane] Writing base 01691000 00000000 0 0 12800
[    5.841817] [drm:intel_crtc_enable_planes] PSR FBDEV crtc enable planes flush fb bits
[    5.841827] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[    5.841830] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[    5.841832] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[    5.841834] [drm:check_crtc_state] [CRTC:20]
[    5.841842] [drm:check_crtc_state] [CRTC:24]
[    5.841843] [drm:check_crtc_state] [CRTC:28]
[    5.841845] [drm:check_shared_dpll_state] WRPLL 1
[    5.841846] [drm:check_shared_dpll_state] WRPLL 2
[    5.841876] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
[    5.841879] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
[    5.841881] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.841883] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[    5.841885] [drm:intel_crtc_set_config] [CRTC:28] [NOFB]
[    5.841886] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0
[    5.841887] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.841889] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[    5.841892] [drm:drm_fb_helper_hotplug_event] 
[    5.841894] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
[    5.841896] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[    5.842236] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[    5.842555] [drm:intel_dp_probe_oui] Branch OUI: 000000
[    5.842569] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[    5.842573] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
[    5.842577] [drm:drm_mode_debug_printmodeline] Modeline 32:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.842579] [drm:drm_mode_debug_printmodeline] Modeline 33:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
[    5.842581] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
[    5.842582] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[    5.842806] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    5.842808] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[    5.842811] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
[    5.842815] [drm:drm_setup_crtcs] 
[    5.842817] [drm:drm_enable_connectors] connector 31 enabled? yes
[    5.842818] [drm:drm_enable_connectors] connector 40 enabled? no
[    5.842820] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
[    5.842821] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
[    5.842823] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:20]: 3200x1800
[    5.842824] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[    5.842826] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 20 (0,0)
[    5.842853] [drm:ironlake_update_primary_plane] Writing base 01691000 00000000 0 0 12800
[    5.842879] [drm:intel_crtc_set_config] [CRTC:20] [FB:44] #connectors=1 (x y) (0 0)
[    5.842881] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    5.842883] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.842885] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.842887] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[    5.842891] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[    5.842897] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[    5.842898] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[    5.842900] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[    5.842901] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[    5.842902] [drm:intel_dump_pipe_config] cpu_transcoder: D
[    5.842903] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[    5.842905] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.842907] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[    5.842908] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.842909] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.842910] [drm:intel_dump_pipe_config] requested mode:
[    5.842913] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.842913] [drm:intel_dump_pipe_config] adjusted mode:
[    5.842916] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.842918] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[    5.842919] [drm:intel_dump_pipe_config] port clock: 540000
[    5.842920] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[    5.842921] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.842922] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.842923] [drm:intel_dump_pipe_config] ips: 0
[    5.842924] [drm:intel_dump_pipe_config] double wide: 0
[    5.842925] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
[    5.842927] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
[    5.842929] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.842930] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[    5.842931] [drm:intel_crtc_set_config] [CRTC:28] [NOFB]
[    5.842933] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0
[    5.842934] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.842935] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[    5.842944] Console: switching to colour frame buffer device 400x112
[    5.842951] [drm:intel_crtc_set_config] [CRTC:20] [FB:44] #connectors=1 (x y) (0 0)
[    5.842953] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    5.842954] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.842955] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.842956] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[    5.842958] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[    5.842962] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[    5.842963] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[    5.842964] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[    5.842965] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[    5.842966] [drm:intel_dump_pipe_config] cpu_transcoder: D
[    5.842967] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[    5.842968] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.842970] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[    5.842972] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.842972] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.842973] [drm:intel_dump_pipe_config] requested mode:
[    5.842975] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.842976] [drm:intel_dump_pipe_config] adjusted mode:
[    5.842978] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.842980] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[    5.842981] [drm:intel_dump_pipe_config] port clock: 540000
[    5.842982] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[    5.842983] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.842984] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.842985] [drm:intel_dump_pipe_config] ips: 0
[    5.842986] [drm:intel_dump_pipe_config] double wide: 0
[    5.854255] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.854255] i915 0000:00:02.0: registered panic notifier
[    5.854499] [drm:i915_gem_open] 
[    5.854528] [drm:ironlake_update_primary_plane] Writing base 01691000 00000000 0 0 12800
[    5.854542] [drm:intel_crtc_set_config] [CRTC:20] [FB:44] #connectors=1 (x y) (0 0)
[    5.854544] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    5.854545] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.854547] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.854548] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[    5.854550] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[    5.854554] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[    5.854555] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[    5.854556] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[    5.854557] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[    5.854558] [drm:intel_dump_pipe_config] cpu_transcoder: D
[    5.854559] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[    5.854560] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.854562] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[    5.854563] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.854564] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.854565] [drm:intel_dump_pipe_config] requested mode:
[    5.854567] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.854567] [drm:intel_dump_pipe_config] adjusted mode:
[    5.854569] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.854571] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[    5.854571] [drm:intel_dump_pipe_config] port clock: 540000
[    5.854572] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[    5.854573] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.854574] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.854575] [drm:intel_dump_pipe_config] ips: 0
[    5.854576] [drm:intel_dump_pipe_config] double wide: 0
[    5.854577] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
[    5.854579] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
[    5.854580] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.854581] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[    5.854582] [drm:intel_crtc_set_config] [CRTC:28] [NOFB]
[    5.854583] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0
[    5.854584] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.854585] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[    5.854595] [drm:i915_gem_open] 
[    5.854637] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[    5.854639] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[    5.854643] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[    5.854644] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
[    5.854645] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[    5.854982] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[    5.855294] [drm:intel_dp_probe_oui] Branch OUI: 000000
[    5.855302] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[    5.855306] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
[    5.855309] [drm:drm_mode_debug_printmodeline] Modeline 32:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.855312] [drm:drm_mode_debug_printmodeline] Modeline 33:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
[    5.855317] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[    5.868809] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[    5.868813] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
[    5.868815] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[    5.869019] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    5.869022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[    5.869023] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
[    5.869027] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[    5.869029] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
[    5.869029] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[    5.869219] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    5.869220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[    5.869222] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
[    5.869240] [drm:add_framebuffer_internal] [FB:43]
[    5.889765] [drm:add_framebuffer_internal] [FB:43]
[    5.889783] [drm:drm_mode_setcrtc] [CRTC:20]
[    5.889786] [drm:drm_mode_setcrtc] [CONNECTOR:31:eDP-1]
[    5.889788] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
[    5.889790] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=1
[    5.889791] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.889793] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.889795] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[    5.889798] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[    5.889802] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[    5.889803] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[    5.889805] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[    5.889806] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[    5.889807] [drm:intel_dump_pipe_config] cpu_transcoder: D
[    5.889808] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[    5.889809] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.889811] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[    5.889812] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.889813] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.889813] [drm:intel_dump_pipe_config] requested mode:
[    5.889815] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.889816] [drm:intel_dump_pipe_config] adjusted mode:
[    5.889818] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.889820] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[    5.889820] [drm:intel_dump_pipe_config] port clock: 540000
[    5.889821] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[    5.889822] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.889823] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.889824] [drm:intel_dump_pipe_config] ips: 0
[    5.889825] [drm:intel_dump_pipe_config] double wide: 0
[    5.903381] [drm:ironlake_update_primary_plane] Writing base 00000000 00000000 0 0 12800
[    5.915765] [drm:drm_mode_setcrtc] [CRTC:20]
[    5.915770] [drm:drm_mode_setcrtc] [CONNECTOR:31:eDP-1]
[    5.915772] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
[    5.915775] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[    5.915776] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[    5.915778] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    5.915780] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[    5.915783] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[    5.915787] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[    5.915788] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[    5.915790] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[    5.915791] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[    5.915792] [drm:intel_dump_pipe_config] cpu_transcoder: D
[    5.915793] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[    5.915794] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    5.915796] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[    5.915797] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    5.915798] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[    5.915799] [drm:intel_dump_pipe_config] requested mode:
[    5.915801] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.915802] [drm:intel_dump_pipe_config] adjusted mode:
[    5.915804] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[    5.915806] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[    5.915806] [drm:intel_dump_pipe_config] port clock: 540000
[    5.915807] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[    5.915809] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    5.915810] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    5.915811] [drm:intel_dump_pipe_config] ips: 0
[    5.915812] [drm:intel_dump_pipe_config] double wide: 0
[    6.731419] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[    8.864649] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[    8.864663] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  115.582006] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[  115.747745] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[  115.747751] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  115.747754] usb 1-1: Product: USB2.0 Hub
[  115.748760] hub 1-1:1.0: USB hub found
[  115.749245] hub 1-1:1.0: 4 ports detected
[  116.016565] usb 1-1.1: new full-speed USB device number 6 using xhci_hcd
[  116.103763] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[  116.103769] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  116.103772] usb 1-1.1: Product: USB Receiver
[  116.103774] usb 1-1.1: Manufacturer: Logitech
[  116.106777] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0002/input/input6
[  116.106977] hid-generic 0003:046D:C52F.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input0
[  116.109429] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0003/input/input7
[  116.160727] hid-generic 0003:046D:C52F.0003: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input1
[  116.234701] usb 1-1.2: new full-speed USB device number 7 using xhci_hcd
[  116.322231] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[  116.322237] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  116.322240] usb 1-1.2: Product: USB Receiver
[  116.322243] usb 1-1.2: Manufacturer: Logitech
[  116.324841] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C52B.0004/input/input8
[  116.375948] hid-generic 0003:046D:C52B.0004: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input0
[  116.378732] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C52B.0005/input/input9
[  116.430109] hid-generic 0003:046D:C52B.0005: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input1
[  116.433135] hid-generic 0003:046D:C52B.0006: hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input2
[  118.955965] random: nonblocking pool is initialized
[  121.089903] usb 1-1: USB disconnect, device number 5
[  121.089907] usb 1-1.1: USB disconnect, device number 6
[  121.131784] usb 1-1.2: USB disconnect, device number 7
[  123.490859] usb 1-1: new high-speed USB device number 8 using xhci_hcd
[  123.656551] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[  123.656556] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  123.656559] usb 1-1: Product: USB2.0 Hub
[  123.657603] hub 1-1:1.0: USB hub found
[  123.658074] hub 1-1:1.0: 4 ports detected
[  123.925374] usb 1-1.1: new full-speed USB device number 9 using xhci_hcd
[  124.012611] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[  124.012618] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  124.012621] usb 1-1.1: Product: USB Receiver
[  124.012623] usb 1-1.1: Manufacturer: Logitech
[  124.015894] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0007/input/input10
[  124.016183] hid-generic 0003:046D:C52F.0007: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input0
[  124.018429] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0008/input/input11
[  124.069628] hid-generic 0003:046D:C52F.0008: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input1
[  124.143547] usb 1-1.2: new full-speed USB device number 10 using xhci_hcd
[  124.230974] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[  124.230979] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  124.230982] usb 1-1.2: Product: USB Receiver
[  124.230985] usb 1-1.2: Manufacturer: Logitech
[  124.233547] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C52B.0009/input/input12
[  124.284649] hid-generic 0003:046D:C52B.0009: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input0
[  124.287164] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C52B.000A/input/input13
[  124.337884] hid-generic 0003:046D:C52B.000A: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input1
[  124.340796] hid-generic 0003:046D:C52B.000B: hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input2
[  136.049149] PM: Starting manual resume from disk
[  136.049155] PM: Hibernation image partition 253:1 present
[  136.049157] PM: Looking for hibernation image.
[  136.049349] PM: Image not found (code -22)
[  136.049353] PM: Hibernation image not present or could not be loaded.
[  136.096803] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[  136.313190] systemd-journald[137]: Received SIGTERM from PID 1 (systemd).
[  136.402219] audit: type=1404 audit(1425412000.925:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[  136.433263] SELinux: 2048 avtab hash slots, 104701 rules.
[  136.446612] SELinux: 2048 avtab hash slots, 104701 rules.
[  136.468341] SELinux:  8 users, 103 roles, 4987 types, 294 bools, 1 sens, 1024 cats
[  136.468344] SELinux:  83 classes, 104701 rules
[  136.471624] SELinux:  Permission audit_read in class capability2 not defined in policy.
[  136.471629] SELinux:  Class binder not defined in policy.
[  136.471629] SELinux: the above unknown classes and permissions will be allowed
[  136.471633] SELinux:  Completing initialization.
[  136.471634] SELinux:  Setting up existing superblocks.
[  136.477356] audit: type=1403 audit(1425412001.000:3): policy loaded auid=4294967295 ses=4294967295
[  136.483195] systemd[1]: Successfully loaded SELinux policy in 84.053ms.
[  136.515380] systemd[1]: Relabelled /dev and /run in 15.046ms.
[  136.543857] systemd-sysv-generator[2321]: Could not find init script for wl.service
[  136.544823] systemd-sysv-generator[2321]: Could not find init script for wl.service
[  136.546064] systemd-sysv-generator[2321]: Could not find init script for wl.service
[  136.547274] systemd-sysv-generator[2321]: Could not find init script for wl.service
[  136.821393] EXT4-fs (dm-2): re-mounted. Opts: (null)
[  136.835910] systemd-journald[2343]: Received request to flush runtime journal from PID 1
[  137.306667] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258)
[  137.306675] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  137.334351] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  137.368092] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.PMAX] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[  137.368101] ACPI Error: Method parse/execution failed [\_SB_.PCI0.B0D4._TMP] (Node ffff8802560e8370), AE_NOT_FOUND (20150204/psparse-536)
[  137.398527] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[  137.412694] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=46/937
[  137.412700] [drm:intel_panel_actually_set_backlight] set backlight PWM = 46
[  137.453248] wmi: Mapper loaded
[  137.558053] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input14
[  137.568494] media: Linux media interface: v0.10
[  137.644668] hid-rmi 0018:06CB:2714.000C: Scanning PDT...
[  137.646127] Linux video capture interface: v2.00
[  137.649064] hid-rmi 0018:06CB:2714.000C: Found F34 on page 0x00
[  137.652266] hid-rmi 0018:06CB:2714.000C: Found F01 on page 0x00
[  137.665656] iTCO_vendor_support: vendor-support=0
[  137.682127] input: ATML1000:00 03EB:8A0F as /devices/pci0000:00/INT3433:00/i2c-8/i2c-ATML1000:00/0018:03EB:8A0F.000D/input/input16
[  137.682341] hid-multitouch 0018:03EB:8A0F.000D: input,hidraw5: <UNKNOWN> HID v1.00 Device [ATML1000:00 03EB:8A0F] on 
[  137.688076] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[  137.688117] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[  137.689903] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  137.715964] hid-rmi 0018:06CB:2714.000C: Found F11 on page 0x00
[  137.717316] Bluetooth: Core ver 2.20
[  137.717330] NET: Registered protocol family 31
[  137.717331] Bluetooth: HCI device and connection manager initialized
[  137.717334] Bluetooth: HCI socket layer initialized
[  137.717337] Bluetooth: L2CAP socket layer initialized
[  137.717345] Bluetooth: SCO socket layer initialized
[  137.722807] hid-rmi 0018:06CB:2714.000C: Found F54 on page 0x01
[  137.729080] hid-rmi 0018:06CB:2714.000C: Found F55 on page 0x02
[  137.760415] hid-rmi 0018:06CB:2714.000C: Found F30 on page 0x03
[  137.770631] usbcore: registered new interface driver btusb
[  137.774922] hid-rmi 0018:06CB:2714.000C: rmi_scan_pdt: Done with PDT scan.
[  137.779882] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0489-e07a.hcd failed with error -2
[  137.779887] Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0489-e07a.hcd not found
[  137.805265] hid-rmi 0018:06CB:2714.000C: rmi_populate_f11: size in mm: 87 x 57
[  137.826582] input: SYNA2B22:00 06CB:2714 as /devices/pci0000:00/INT3432:00/i2c-7/i2c-SYNA2B22:00/0018:06CB:2714.000C/input/input15
[  137.832422] hid-rmi 0018:06CB:2714.000C: input,hidraw6: <UNKNOWN> HID v1.00 Mouse [SYNA2B22:00 06CB:2714] on 
[  137.833824] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0535)
[  137.837212] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[  137.842323] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input18
[  137.842648] usbcore: registered new interface driver uvcvideo
[  137.842651] USB Video Class driver (1.1.1)
[  137.864545] [drm:intel_display_power_get] enabling display
[  137.864550] [drm:hsw_set_power_well] Enabling power well
[  137.864934] Adding 8126460k swap on /dev/mapper/fedora-swap.  Priority:-1 extents:1 across:8126460k SSFS
[  137.867872] sound hdaudioC1D0: autoconfig for ALC286: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[  137.867875] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[  137.867877] sound hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[  137.867878] sound hdaudioC1D0:    mono: mono_out=0x0
[  137.867879] sound hdaudioC1D0:    inputs:
[  137.867880] sound hdaudioC1D0:      Mic=0x18
[  137.867882] sound hdaudioC1D0:      Internal Mic=0x12
[  137.873853] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[  137.873936] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[  137.884732] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[  137.884838] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[  137.884907] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[  137.981311] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[  138.068391] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  138.585942] audit: type=1305 audit(1425412003.107:4): audit_pid=2513 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[  138.892673] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  138.892675] Bluetooth: BNEP filters: protocol multicast
[  138.892679] Bluetooth: BNEP socket layer initialized
[  139.960952] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[  140.012795] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  140.077293] Ebtables v2.0 registered
[  140.144169] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[  141.040977] cfg80211: Calling CRDA to update world regulatory domain
[  141.077106] cfg80211: World regulatory domain updated:
[  141.077110] cfg80211:  DFS Master region: unset
[  141.077111] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  141.077114] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  141.077116] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  141.077118] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  141.077120] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  141.077123] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  141.077124] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  141.077126] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  141.077128] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  141.089545] wl: module license 'unspecified' taints kernel.
[  141.089548] Disabling lock debugging due to kernel taint
[  141.091869] wl: module verification failed: signature and/or required key missing - tainting kernel
[  141.110881] eth0: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[  141.119248] wl 0000:01:00.0 wlp1s0: renamed from eth0
[  143.682861] ax88179_178a 2-2:1.0 enp0s20u2: ax88179 - Link status is: 1
[  149.219736] [drm:i915_gem_open] 
[  149.226854] [drm:i915_gem_open] 
[  149.226903] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[  149.228616] [drm:i915_gem_open] 
[  149.228635] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[  149.228639] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[  149.229795] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[  149.229813] [drm:add_framebuffer_internal] [FB:45]
[  149.230085] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[  149.230089] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
[  149.230192] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[  149.230202] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[  149.230383] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[  149.230389] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[  149.292477] [drm:add_framebuffer_internal] [FB:45]
[  149.293567] [drm:drm_mode_setcrtc] [CRTC:20]
[  149.293573] [drm:drm_mode_setcrtc] [CONNECTOR:31:eDP-1]
[  149.293577] [drm:intel_crtc_set_config] [CRTC:20] [FB:45] #connectors=1 (x y) (0 0)
[  149.293580] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=1
[  149.293583] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  149.293586] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  149.293589] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  149.293592] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  149.293598] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  149.293600] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  149.293602] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  149.293605] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  149.293606] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  149.293608] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  149.293610] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  149.293613] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  149.293615] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  149.293616] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  149.293618] [drm:intel_dump_pipe_config] requested mode:
[  149.293621] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x0 0xa
[  149.293622] [drm:intel_dump_pipe_config] adjusted mode:
[  149.293626] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  149.293629] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  149.293630] [drm:intel_dump_pipe_config] port clock: 540000
[  149.293632] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  149.293634] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  149.293635] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  149.293637] [drm:intel_dump_pipe_config] ips: 0
[  149.293638] [drm:intel_dump_pipe_config] double wide: 0
[  149.301207] [drm:ironlake_update_primary_plane] Writing base 02C8A000 00000000 0 0 12800
[  149.313709] [drm:drm_mode_setcrtc] [CRTC:24]
[  149.313714] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
[  149.313717] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
[  149.313719] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  149.313722] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  149.313727] [drm:drm_mode_setcrtc] [CRTC:28]
[  149.313729] [drm:intel_crtc_set_config] [CRTC:28] [NOFB]
[  149.313731] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0
[  149.313733] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  149.313734] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  149.724716] usb 1-1: USB disconnect, device number 8
[  149.724743] usb 1-1.1: USB disconnect, device number 9
[  149.762849] usb 1-1.2: USB disconnect, device number 10
[  150.156927] [drm:i915_gem_open] 
[  150.178143] [drm:i915_gem_context_create_ioctl] HW context 1 created
[  150.180601] [drm:i915_gem_context_create_ioctl] HW context 2 created
[  150.181030] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
[  150.181772] [drm:i915_gem_context_create_ioctl] HW context 1 created
[  150.182051] [drm:i915_gem_context_destroy_ioctl] HW context 2 destroyed
[  150.182769] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
[  150.324751] [drm:add_framebuffer_internal] [FB:43]
[  151.194101] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[  151.194105] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
[  151.194107] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  151.194113] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  151.194119] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[  151.204931] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  151.205235] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  151.205246] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[  151.205248] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
[  151.205251] [drm:drm_mode_debug_printmodeline] Modeline 32:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  151.205252] [drm:drm_mode_debug_printmodeline] Modeline 33:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
[  151.205261] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[  151.205408] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[  151.205410] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
[  151.205411] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  151.205567] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  151.205568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  151.205570] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
[  151.210149] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[  151.210153] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
[  151.210155] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  151.210470] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  151.210776] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  151.210784] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[  151.210787] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
[  151.210789] [drm:drm_mode_debug_printmodeline] Modeline 32:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  151.210791] [drm:drm_mode_debug_printmodeline] Modeline 33:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
[  151.210795] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[  151.210871] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[  151.210873] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
[  151.210874] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  151.211037] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  151.211040] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  151.211042] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
[  151.485886] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[  151.485892] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
[  151.485894] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  151.497713] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  151.498069] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  151.498082] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[  151.498086] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
[  151.498090] [drm:drm_mode_debug_printmodeline] Modeline 32:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  151.498093] [drm:drm_mode_debug_printmodeline] Modeline 33:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
[  151.498107] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[  151.498215] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[  151.498217] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
[  151.498219] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  151.498380] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  151.498383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  151.498385] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
[  151.680212] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937
[  151.680215] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[  152.129722] [drm:i915_gem_open] 
[  152.161756] [drm:i915_gem_context_create_ioctl] HW context 1 created
[  152.167491] [drm:i915_gem_open] 
[  152.212085] [drm:i915_gem_context_create_ioctl] HW context 1 created
[  152.219788] [drm:add_framebuffer_internal] [FB:46]
[  152.235002] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[  152.235008] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
[  152.235010] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
[  152.235331] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
[  152.235642] [drm:intel_dp_probe_oui] Branch OUI: 000000
[  152.235651] [drm:drm_edid_to_eld] ELD: no CEA Extension found
[  152.235654] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
[  152.235656] [drm:drm_mode_debug_printmodeline] Modeline 32:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  152.235658] [drm:drm_mode_debug_printmodeline] Modeline 33:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
[  152.235662] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
[  152.235730] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
[  152.235731] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
[  152.235733] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[  152.235893] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[  152.235894] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[  152.235896] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
[  153.468010] usb 1-1: new high-speed USB device number 11 using xhci_hcd
[  153.633145] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[  153.633149] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  153.633153] usb 1-1: Product: USB2.0 Hub
[  153.634461] hub 1-1:1.0: USB hub found
[  153.634732] hub 1-1:1.0: 4 ports detected
[  153.910468] usb 1-1.1: new full-speed USB device number 12 using xhci_hcd
[  153.996880] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[  153.996884] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  153.996887] usb 1-1.1: Product: USB Receiver
[  153.996889] usb 1-1.1: Manufacturer: Logitech
[  153.999133] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.000E/input/input24
[  154.000146] hid-generic 0003:046D:C52F.000E: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input0
[  154.002202] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.000F/input/input25
[  154.052915] hid-generic 0003:046D:C52F.000F: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input1
[  154.115596] usb 1-1.2: new full-speed USB device number 13 using xhci_hcd
[  154.202194] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[  154.202198] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  154.202201] usb 1-1.2: Product: USB Receiver
[  154.202203] usb 1-1.2: Manufacturer: Logitech
[  154.204760] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C52B.0010/input/input26
[  154.255966] hid-generic 0003:046D:C52B.0010: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input0
[  154.258110] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C52B.0011/input/input27
[  154.309382] hid-generic 0003:046D:C52B.0011: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input1
[  154.311771] hid-generic 0003:046D:C52B.0012: hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input2
[  154.845639] [drm:add_framebuffer_internal] [FB:47]
[  155.197281] cfg80211: Calling CRDA for country: US
[  155.202942] cfg80211: Regulatory domain changed to country: US
[  155.202948] cfg80211:  DFS Master region: FCC
[  155.202950] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  155.202953] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[  155.202955] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[  155.202958] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[  155.202960] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[  155.202962] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[  155.242095] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  155.242108] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  156.621755] [drm:intel_crtc_set_config] [CRTC:20] [FB:44] #connectors=1 (x y) (0 0)
[  156.621758] [drm:intel_set_config_compute_mode_changes] crtc has no fb, will flip
[  156.621760] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=1
[  156.621762] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  156.621764] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  156.621766] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  156.621770] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  156.621776] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  156.621777] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  156.621779] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  156.621781] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  156.621782] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  156.621783] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  156.621785] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  156.621786] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  156.621788] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  156.621789] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  156.621790] [drm:intel_dump_pipe_config] requested mode:
[  156.621793] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  156.621794] [drm:intel_dump_pipe_config] adjusted mode:
[  156.621796] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  156.621798] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  156.621799] [drm:intel_dump_pipe_config] port clock: 540000
[  156.621800] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  156.621801] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  156.621802] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  156.621803] [drm:intel_dump_pipe_config] ips: 0
[  156.621804] [drm:intel_dump_pipe_config] double wide: 0
[  156.621824] [drm:ironlake_update_primary_plane] Writing base 01691000 00000000 0 0 12800
[  156.665517] [drm:intel_fbdev_set_par] PSR FBDEV modeset
[  156.665534] [drm:ironlake_update_primary_plane] Writing base 01691000 00000000 0 0 12800
[  156.665548] [drm:intel_crtc_set_config] [CRTC:20] [FB:44] #connectors=1 (x y) (0 0)
[  156.665550] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  156.665551] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  156.665553] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  156.665554] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  156.665556] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  156.665559] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  156.665560] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  156.665561] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  156.665561] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  156.665562] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  156.665562] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  156.665563] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  156.665564] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  156.665565] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  156.665565] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  156.665566] [drm:intel_dump_pipe_config] requested mode:
[  156.665567] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  156.665568] [drm:intel_dump_pipe_config] adjusted mode:
[  156.665569] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  156.665570] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  156.665571] [drm:intel_dump_pipe_config] port clock: 540000
[  156.665571] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  156.665572] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  156.665572] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  156.665573] [drm:intel_dump_pipe_config] ips: 0
[  156.665573] [drm:intel_dump_pipe_config] double wide: 0
[  156.665574] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
[  156.665575] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
[  156.665576] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  156.665576] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  156.665577] [drm:intel_crtc_set_config] [CRTC:28] [NOFB]
[  156.665578] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0
[  156.665578] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  156.665579] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
[  156.665582] [drm:intel_crtc_set_config] [CRTC:20] [FB:44] #connectors=1 (x y) (0 0)
[  156.665582] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  156.665583] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  156.665583] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  156.665584] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  156.665585] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  156.665587] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  156.665587] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  156.665588] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  156.665588] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  156.665589] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  156.665589] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  156.665590] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  156.665591] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  156.665592] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  156.665592] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  156.665592] [drm:intel_dump_pipe_config] requested mode:
[  156.665593] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  156.665594] [drm:intel_dump_pipe_config] adjusted mode:
[  156.665595] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  156.665596] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  156.665596] [drm:intel_dump_pipe_config] port clock: 540000
[  156.665597] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  156.665597] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  156.665598] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  156.665598] [drm:intel_dump_pipe_config] ips: 0
[  156.665598] [drm:intel_dump_pipe_config] double wide: 0
[  156.665604] [drm:intel_crtc_set_config] [CRTC:20] [FB:44] #connectors=1 (x y) (0 0)
[  156.665605] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  156.665605] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  156.665606] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  156.665606] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  156.665607] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  156.665609] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  156.665609] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  156.665610] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  156.665610] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  156.665611] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  156.665611] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  156.665612] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  156.665612] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  156.665613] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  156.665613] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  156.665614] [drm:intel_dump_pipe_config] requested mode:
[  156.665615] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  156.665615] [drm:intel_dump_pipe_config] adjusted mode:
[  156.665616] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  156.665617] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  156.665618] [drm:intel_dump_pipe_config] port clock: 540000
[  156.665618] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  156.665619] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  156.665619] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  156.665619] [drm:intel_dump_pipe_config] ips: 0
[  156.665620] [drm:intel_dump_pipe_config] double wide: 0
[  156.676994] [drm:intel_crtc_set_config] [CRTC:20] [FB:44] #connectors=1 (x y) (0 0)
[  156.676997] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  156.676999] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  156.677001] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  156.677003] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  156.677008] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  156.677013] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  156.677014] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  156.677016] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  156.677018] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  156.677018] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  156.677019] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  156.677020] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  156.677022] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  156.677023] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  156.677024] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  156.677024] [drm:intel_dump_pipe_config] requested mode:
[  156.677027] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  156.677027] [drm:intel_dump_pipe_config] adjusted mode:
[  156.677029] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  156.677031] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  156.677031] [drm:intel_dump_pipe_config] port clock: 540000
[  156.677032] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  156.677033] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  156.677034] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  156.677034] [drm:intel_dump_pipe_config] ips: 0
[  156.677035] [drm:intel_dump_pipe_config] double wide: 0
[  157.722238] usb 1-1: USB disconnect, device number 11
[  157.722243] usb 1-1.1: USB disconnect, device number 12
[  157.769643] usb 1-1.2: USB disconnect, device number 13
[  158.122726] Bluetooth: RFCOMM TTY layer initialized
[  158.122735] Bluetooth: RFCOMM socket layer initialized
[  158.122811] Bluetooth: RFCOMM ver 1.11
[  158.217967] fuse init (API version 7.23)
[  217.790189] usb 1-1: new high-speed USB device number 14 using xhci_hcd
[  306.573885] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=469/937
[  306.573890] [drm:intel_panel_actually_set_backlight] set backlight PWM = 469
[  381.619819] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=117/937
[  381.619825] [drm:intel_panel_actually_set_backlight] set backlight PWM = 117
[  456.660275] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/937
[  456.660280] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[  456.660289] [drm:intel_edp_backlight_power] panel power control backlight disable
[  759.232969] [drm:intel_fbdev_blank] PSR FBDEV blank normal
[  759.232987] [drm:intel_crtc_disable_planes] PSR FBDEV crtc disable planes flush fb bits
[  759.234949] [drm:intel_edp_backlight_off] 
[  759.436075] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[  759.444088] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  759.444098] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  759.444278] [drm:edp_panel_off] Turn eDP port A panel power off
[  759.444283] [drm:wait_panel_off] Wait for panel power off time
[  759.444288] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
[  759.499089] [drm:wait_panel_status] Wait complete
[  759.499103] [drm:intel_display_power_put] disabling always-on
[  759.499109] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  759.499110] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  759.499112] [drm:check_crtc_state] [CRTC:20]
[  759.499114] [drm:check_crtc_state] [CRTC:24]
[  759.499116] [drm:check_crtc_state] [CRTC:28]
[  759.499118] [drm:check_shared_dpll_state] WRPLL 1
[  759.499119] [drm:check_shared_dpll_state] WRPLL 2
[  895.750838] usb 1-1: new high-speed USB device number 15 using xhci_hcd
[  895.916547] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[  895.916553] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  895.916556] usb 1-1: Product: USB2.0 Hub
[  895.918199] hub 1-1:1.0: USB hub found
[  895.918453] hub 1-1:1.0: 4 ports detected
[  896.185424] usb 1-1.1: new full-speed USB device number 16 using xhci_hcd
[  896.272655] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[  896.272660] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  896.272663] usb 1-1.1: Product: USB Receiver
[  896.272666] usb 1-1.1: Manufacturer: Logitech
[  896.275874] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0013/input/input28
[  896.276647] hid-generic 0003:046D:C52F.0013: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input0
[  896.279103] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0014/input/input29
[  896.331563] hid-generic 0003:046D:C52F.0014: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.1/input1
[  896.394529] usb 1-1.2: new full-speed USB device number 17 using xhci_hcd
[  896.481901] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
[  896.481907] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  896.481910] usb 1-1.2: Product: USB Receiver
[  896.481912] usb 1-1.2: Manufacturer: Logitech
[  896.485015] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C52B.0015/input/input30
[  896.535797] hid-generic 0003:046D:C52B.0015: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input0
[  896.538314] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C52B.0016/input/input31
[  896.590311] hid-generic 0003:046D:C52B.0016: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input1
[  896.593265] hid-generic 0003:046D:C52B.0017: hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1.2/input2
[  897.313095] [drm:intel_fbdev_blank] PSR FBDEV unblank
[  897.313109] [drm:intel_display_power_get] enabling always-on
[  897.313112] [drm:intel_crtc_control] PSR FBDEV crtc enable planes
[  897.313139] [drm:edp_panel_on] Turn eDP port A panel power on
[  897.313142] [drm:wait_panel_power_cycle] Wait for panel power cycle
[  897.313148] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
[  897.313150] [drm:wait_panel_status] Wait complete
[  897.313155] [drm:wait_panel_on] Wait for panel power on
[  897.313159] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
[  897.521899] [drm:wait_panel_status] Wait complete
[  897.521908] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
[  897.521916] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
[  897.523007] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[  897.523625] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[  897.524224] [drm:intel_dp_start_link_train] clock recovery OK
[  897.525131] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
[  897.526031] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[  897.526269] [drm:intel_edp_backlight_on] 
[  897.526270] [drm:intel_panel_enable_backlight] pipe A
[  897.526275] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[  897.526431] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[  897.527818] [drm:haswell_crtc_enable] PSR FBDEV crtc enable planes
[  897.527824] [drm:ironlake_update_primary_plane] Writing base 01691000 00000000 0 0 12800
[  897.542925] [drm:intel_crtc_enable_planes] PSR FBDEV crtc enable planes flush fb bits
[  897.542930] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  897.542932] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  897.542934] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  897.542936] [drm:check_crtc_state] [CRTC:20]
[  897.542945] [drm:check_crtc_state] [CRTC:24]
[  897.542947] [drm:check_crtc_state] [CRTC:28]
[  897.542949] [drm:check_shared_dpll_state] WRPLL 1
[  897.542950] [drm:check_shared_dpll_state] WRPLL 2
[  897.542954] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
[  897.542956] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
[  897.542957] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
[  897.542958] [drm:check_crtc_state] [CRTC:20]
[  897.542965] [drm:check_crtc_state] [CRTC:24]
[  897.542967] [drm:check_crtc_state] [CRTC:28]
[  897.542968] [drm:check_shared_dpll_state] WRPLL 1
[  897.542969] [drm:check_shared_dpll_state] WRPLL 2
[  897.542976] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937
[  897.542977] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
[  897.542990] [drm:intel_crtc_set_config] [CRTC:20] [FB:44] #connectors=1 (x y) (0 0)
[  897.542994] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
[  897.542995] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
[  897.542998] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[  897.543000] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
[  897.543003] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 14 pixel clock 361310KHz
[  897.543009] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
[  897.543010] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
[  897.543012] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 24, dithering: 0
[  897.543013] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config for pipe A
[  897.543014] [drm:intel_dump_pipe_config] cpu_transcoder: D
[  897.543015] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[  897.543016] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[  897.543018] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
[  897.543020] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[  897.543021] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[  897.543021] [drm:intel_dump_pipe_config] requested mode:
[  897.543024] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  897.543025] [drm:intel_dump_pipe_config] adjusted mode:
[  897.543027] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
[  897.543030] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
[  897.543030] [drm:intel_dump_pipe_config] port clock: 540000
[  897.543031] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
[  897.543033] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[  897.543034] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[  897.543035] [drm:intel_dump_pipe_config] ips: 0
[  897.543035] [drm:intel_dump_pipe_config] double wide: 0
[  898.907266] usb 1-1: USB disconnect, device number 15
[  898.907271] usb 1-1.1: USB disconnect, device number 16
[  898.941848] usb 1-1.2: USB disconnect, device number 17
[  900.534735] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
[  900.534745] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[  903.295547] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
