[Libdlo] [ANNOUNCE] displaylink-mod-0.3(alpha) (was udlfb)

[Greg KH]

On Thu, Jul 09, 2009 at 09:56:50AM -0600, jasonlife wrote:
> On Thu, Jul 9, 2009 at 9:32 AM, Greg KH <greg at kroah.com> wrote:
> 
> > On Thu, Jul 09, 2009 at 09:20:56AM -0600, jasonlife wrote:
> > > >
> > > > Could you explain little bit more about this problem?  I noticed my
> > Samsung
> > > > monitor provides a HID interface as you expected.  Does a DisplayLink
> > USB
> > > > device have a problem if it also provides other device types like
> > > > keyboard/mouse (HID) and sound?
> > > >
> > >
> > > I think my question was not clear.  Based on lsusb -vv result,
> > DisplayLink
> > > device provides two configurations in my Samsung monitor.  Does this
> > cause
> > > the problem?  Is there a way to fix or go around this problem?
> >
> > Yes, the solution is to always set the first configuration as active.
> > This can be done with a single line of code, perhaps it needs to be
> > added to the driver?
> 
> 
> The first configuration is HID in my samsung monitor case.  if it is a
> single line of code, then could you show me how to do it? I want to try
> that..

Can you provide the output of the following shell script that will show
what the devices look like?  Or, can you provide the output of
/proc/bus/usb/devices, if you have it (that would be the best.)

thanks,

greg k-h
-------------- next part --------------
#!/bin/bash

# Copyright: 2009 Greg Kroah-Hartman <greg at kroah.com>
#            2009 Randy Dunlap <rdunlap at xenotime.net>
#            2009 Frans Pop <elendil at planet.nl>
#
# This software may be used and distributed according to the terms of
# the GNU General Public License (GPL), version 2, or at your option
# any later version.

print_string() {
	file=$1
	name=$2
	if [ -f $file ]; then
		echo "S:  $name=`cat $file`"
	fi
}

class_decode() {
	local class=$1		# v4: in hex

	case $class in
	"00") echo ">ifc " ;;
	"01") echo "audio" ;;
	"02") echo "commc" ;;
	"03") echo "HID  " ;;
	"05") echo "PID  " ;;
	"06") echo "still" ;;
	"07") echo "print" ;;
	"08") echo "stor." ;;
	"09") echo "hub  " ;;
	"0a") echo "data " ;;
	"0b") echo "scard" ;;
	"0d") echo "c-sec" ;;
	"0e") echo "video" ;;
	"0f") echo "perhc" ;;
	"dc") echo "diagd" ;;
	"e0") echo "wlcon" ;;
	"ef") echo "misc " ;;
	"fe") echo "app. " ;;
	"ff") echo "vend." ;;
	"*")  echo "unk. " ;;
	esac
}

print_endpoint() {
	local eppath=$1

	addr=`cat $eppath/bEndpointAddress`
	attr=`cat $eppath/bmAttributes`
	dir=`cat $eppath/direction`
	eptype=`cat $eppath/type`
	maxps_hex="0x`cat $eppath/wMaxPacketSize`"
	# Extract MaxPS size (bits 0-10) and multiplicity values (bits 11-12)
	maxps=`printf "%4i*%s\n" $(($maxps_hex & 0x7ff)) \
				$((1 + (($maxps_hex >> 11) & 0x3)))`
	interval=`cat $eppath/interval`

	printf "E:  Ad=%s(%s) Atr=%s(%s) MxPS=%s Ivl=%s\n" \
		$addr $dir $attr $eptype "$maxps" $interval
}

print_interface() {
	local ifpath=$1

	ifnum=`cat $ifpath/bInterfaceNumber`
	altset=`cat $ifpath/bAlternateSetting`
	numeps=`cat $ifpath/bNumEndpoints`
	class=`cat $ifpath/bInterfaceClass`
	subclass=`cat $ifpath/bInterfaceSubClass`
	protocol=`cat $ifpath/bInterfaceProtocol`
	if [ -L $ifpath/driver ]; then		# v4: allow for no driver
		driver=`readlink $ifpath/driver`
		driver=`basename $driver`
	else
		driver="(none)"
	fi
	classname=`class_decode $class`
	printf "I:  If#=%2i Alt=%2i #EPs=%2i Cls=%s(%s) Sub=%s Prot=%s Driver=%s\n" \
		$ifnum $altset $numeps $class "$classname" $subclass \
		$protocol $driver

	for endpoint in $ifpath/ep_??
	do
		if [ -L $endpoint ]; then	# v4: verify endpoint exists
			print_endpoint $endpoint
		fi
	done
}

print_device() {
	local devpath=$1
	local parent=$2
	local level=$3
	local count=$4

	[ -d $devpath ] || return
	cd $devpath

	local busnum=`cat busnum`
	local devnum=`cat devnum`

	if [ $level -gt 0 ]; then
		port=$((${devpath##*[-.]} - 1))
	else
		port=0
	fi
	speed=`cat speed`
	maxchild=`cat maxchild`
	printf "\nT:  Bus=%02i Lev=%02i Prnt=%02i Port=%02i Cnt=%02i Dev#=%3i Spd=%-3s MxCh=%2i\n" \
		$busnum $level $parent $port $count $devnum $speed $maxchild

	ver=`cat version`
	devclass=`cat bDeviceClass`
	devsubclass=`cat bDeviceSubClass`
	devprotocol=`cat bDeviceProtocol`
	maxps0=`cat bMaxPacketSize0`
	numconfigs=`cat bNumConfigurations`
	classname=`class_decode $devclass`
	printf "D:  Ver=%5s Cls=%s(%s) Sub=%s Prot=%s MxPS=%2i #Cfgs=%3i\n" \
		$ver $devclass "$classname" $devsubclass $devprotocol \
		$maxps0 $numconfigs

	vendid=`cat idVendor`
	prodid=`cat idProduct`
	revmajor=`cat bcdDevice | cut -c 1-2`
	revminor=`cat bcdDevice | cut -c 3-4`
	printf "P:  Vendor=%s ProdID=%s Rev=%2i.%02i\n" \
		$vendid $prodid $revmajor $revminor

	print_string manufacturer "Manufacturer"
	print_string product Product
	print_string serial SerialNumber

	numifs=`cat bNumInterfaces`
	cfgnum=`cat bConfigurationValue`
	attr=`cat bmAttributes`
	maxpower=`cat bMaxPower`
	printf "C:  #Ifs=%2i Cfg#=%2i Atr=%s MxPwr=%s\n" \
		$numifs $cfgnum $attr $maxpower

	# There's not really any useful info in endpoint 00
	#print_endpoint $devpath/ep_00

	for interface in $busnum-*:?.*
	do
		print_interface $devpath/$interface
	done

	local devcount=0
	for subdev in $busnum-*
	do
		echo "$subdev" | grep -Eq "^$busnum-[0-9]+(\.[0-9]+)*$" \
			|| continue

		devcount=$(($devcount + 1))
		if [ -d $devpath/$subdev ]; then
			print_device $devpath/$subdev \
				$devnum $(($level +1)) $devcount
		fi
	done
}

if [ ! -d /sys/bus ]; then
	echo "Error: directory /sys/bus does not exist; is sysfs mounted?" >&2
	exit 1
fi

for device in /sys/bus/usb/devices/usb*
do
	print_device $device 0 0 0
done