Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "Quadro NVS 280 PCI-E"
    Option "NoLogo" "True" 
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    16
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "CRT-0, CRT-1"
    Option          "UseEdidFreqs"  "true"
    Option 	   "RenderAccel" "true"
    SubSection     "Display"
        Depth       16
    EndSubSection
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung SyncMaster"
EndSection

Section "Device"
	Identifier      "dl0"
	driver          "displaylink"
	#driver          "fbdev"
	Option  "fbdev" "/dev/fb1"
EndSection

Section "Screen"
	Identifier "Screen1"
	Device "dl0"
	Monitor "Monitor1"
EndSection

# DisplayLink
# from parse-edid < edid
Section "Monitor"
	Option "IgnoreEdid" "on"
        # Block type: 2:0 3:fd
        # Block type: 2:0 3:fc
        Identifier "Monitor1"
        VendorName "SAM"
        ModelName "SyncMaster"
        # Block type: 2:0 3:fd
        HorizSync 30-81
        VertRefresh 56-75
        # Max dot clock (video bandwidth) 140 MHz
        # Block type: 2:0 3:fc
        # Block type: 2:0 3:ff
        # DPMS capabilities: Active off:yes  Suspend:no  Standby:no

        Mode    "1280x1024"     # vfreq 60.020Hz, hfreq 63.981kHz
                DotClock        108.000000
                HTimings        1280 1328 1440 1688
                VTimings        1024 1025 1028 1066
                Flags   "+HSync" "+VSync"
        EndMode
        # Block type: 2:0 3:fd
        # Block type: 2:0 3:fc
        # Block type: 2:0 3:ff
EndSection

# glue
Section "ServerLayout"
    Identifier     "Layout0"
    # displaylink screen will only work if loaded as primary screen
    # otherwise you'll find a line in Xorg.0.log like:
    #  (II) Unload module "displaylink"
    # without further explanation why it was unloaded
    #Screen      0  "Screen0" 0 0
    #Screen      1  "Screen1" LeftOf "Screen0"
    Screen      0  "Screen1" 0 0
    Screen      1  "Screen0" RightOf "Screen1"
    #Screen      0  "Screen0"
    #InputDevice    "Keyboard0" "CoreKeyboard"
    #InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "on"
EndSection

#Section "ServerFlags"
#    Option "AutoAddDevices" "false"
#EndSection
