call-failed using Huawei E398

[Bjørn Mork]

Aleksander Morgado <aleksander at lanedo.com> writes:

>> error: couldn't start network: QMI protocol error (14): 'call-failed'
>> call end reason: 1013
>> verbose call end reason: 6, 27
>> Saving state... (CID: 2)
>> error: network start failed, no packet data handle
>> Clearing state...
>> 
>> Sim card is from Vodafone and the APNs are configured as following:
>> at+cgdcont?
>> +CGDCONT: 1,"IP","web.vodafone.de","0.0.0.0",0,0
>> +CGDCONT: 16,"IP","web.vodafone.de","0.0.0.0",0,0
>> 
>> at+cops?
>> +COPS: 0,0,"Vodafone.de",2
>> 
>> Did I miss a step or is this Huawei modem not yet supported?
>> 
>
> I bet you're also hit by the missing APN TLV in the WDS Start Network
> command. 

Or the configured APN is wrong.  From the CodeAurora QMIEnum.h:

   eQMI_CALL_END_REASON_UNKNOWN_APN,               // 1013


> I should update qmicli and qmi-network to support that soon...

I see that you already did.



Bjørn