<div dir="ltr"><div><div>Hi ALL,</div><div><br></div><div>Using uqmi proto to connect on internet is working fine.</div><div>However, Im having a problem with Option GTM689W to enable GPS.<br></div><div>Whenever i execute AT_OGPSMODE=1 im getting a return ERROR.</div><div>Is there any way or tools to execute the AT commands?</div><div><br></div><div>Below is the info of the Device.</div><div><div><div><br></div><div>wwan0 Link encap:Ethernet HWaddr 9A:E7:AE:9B:1A:29 </div><div> inet addr:10.22.5.24 Bcast:10.22.5.27 Mask:255.255.255.252</div><div> inet6 addr: fe80::98e7:aeff:fe9b:1a29/64 Scope:Link</div><div> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1</div><div> RX packets:631 errors:0 dropped:0 overruns:0 frame:0</div><div> TX packets:692 errors:0 dropped:0 overruns:0 carrier:0</div><div> collisions:0 txqueuelen:1000 </div><div> RX bytes:143456 (140.0 KiB) TX bytes:60941 (59.5 KiB)</div></div><div><br></div><div>root@danny:/# gcom -d /dev/ttyUSB1 info</div><div>##### Wireless WAN Modem Configuration #####</div><div>Product text:</div><div>====</div><div><br></div><div>Manufacturer: Option nv</div><div>Model: Option GTM689W</div><div>Revision: D3200-STSUGN-1575 1 [Nov 22 2010 09:00:00]</div><div>SVN: 02</div><div>IMEI: 356144040012268</div><div>+GCAP: +CGSM,+DS,+ES</div><div>OK</div><div>====</div><div>Manufacturer: Option nv</div><div>IMEI and Serial Number: 356144040012268</div><div>Manufacturer's Revision: </div><div>D3200-STSUGN-1575 1 [Nov 22 2010 09:00:0</div><div>Hardware Revision: </div><div><br></div><div>Network Locked: 0</div><div>Customisation: </div><div><br></div><div>Band settings: (</div><div>)</div><div>APN: 1,"IP","<a href="http://etisalat.ae">etisalat.ae</a>","0.0.0.0",0,0</div><div>##### END #####</div></div><div><br></div><div>root@danny:/# picocom -b 115200 /dev/ttyUSB1</div><div>picocom v1.7</div><div><br></div><div>port is : /dev/ttyUSB1</div><div>flowcontrol : none</div><div>baudrate is : 115200</div><div>parity is : none</div><div>databits are : 8</div><div>escape is : C-a</div><div>local echo is : no</div><div>noinit is : no</div><div>noreset is : no</div><div>nolock is : no</div><div>send_cmd is : sz -vv</div><div>receive_cmd is : rz -vv</div><div>imap is : </div><div>omap is : </div><div>emap is : crcrlf,delbs,</div><div><br></div><div>Terminal ready</div><div>ATI</div><div>Manufacturer: Option nv</div><div>Model: Option GTM689W</div><div>Revision: D3200-STSUGN-1575 1 [Nov 22 2010 09:00:00]</div><div>SVN: 02</div><div>IMEI: 356144040012268</div><div>+GCAP: +CGSM,+DS,+ES</div><div><br></div><div>OK</div></div><div><div><b>AT_OGPSMODE=1</b></div><div><b>ERROR</b></div></div><div><br></div><div><br></div><div>T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0</div><div>D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1</div><div>P: Vendor=0af0 ProdID=8120 Rev= 0.02</div><div>S: Manufacturer=Option nv</div><div>S: Product=Option GTM689W</div><div>C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA</div><div>I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan</div><div>E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms</div><div>E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms</div><div>E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms</div><div>I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial</div><div>E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms</div><div>E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms</div><div>I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial</div><div>E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms</div><div>E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms</div><div>E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms</div><div>I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial</div><div>E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms</div><div>E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms</div><div><br></div><div><br></div>-- <br><div class="gmail_signature"><div dir="ltr">Thanks and Best Regards,<div>Danny</div></div></div>
</div>