problems with huawei E3372 alias Telekom Speedstick V

Thu Aug 28 12:45:16 PDT 2014

Hi,

I have problem to get a connection with that device. The device seems to 
switch to the correct mode:

[  153.464197] usb 1-2: new high-speed USB device number 3 using ehci-pci
[  153.579890] usb 1-2: New USB device found, idVendor=12d1, idProduct=14fe
[  153.579905] usb 1-2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[  153.579915] usb 1-2: Product: HUAWEI_MOBILE
[  153.579924] usb 1-2: Manufacturer: HUAWEI_MOBILE
[  153.579932] usb 1-2: SerialNumber: 0123456789ABCDEF
[  153.652051] usb-storage 1-2:1.0: USB Mass Storage device detected
[  153.652474] scsi host4: usb-storage 1-2:1.0
[  153.652898] usbcore: registered new interface driver usb-storage
[  154.446074] usb 1-2: USB disconnect, device number 3
[  154.852229] usb 1-2: new high-speed USB device number 4 using ehci-pci
[  154.967792] usb 1-2: New USB device found, idVendor=12d1, idProduct=1506
[  154.967812] usb 1-2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[  154.967825] usb 1-2: Product: HUAWEI_MOBILE
[  154.967837] usb 1-2: Manufacturer: HUAWEI_MOBILE
[  154.975473] usb-storage 1-2:1.3: USB Mass Storage device detected
[  154.975804] scsi host5: usb-storage 1-2:1.3
[  154.977286] usb-storage 1-2:1.4: USB Mass Storage device detected
[  154.978833] scsi host6: usb-storage 1-2:1.4
[  155.013359] usbcore: registered new interface driver usbserial
[  155.013434] usbcore: registered new interface driver usbserial_generic
[  155.013498] usbserial: USB Serial support registered for generic
[  155.025204] usbcore: registered new interface driver cdc_wdm
[  155.043458] usbcore: registered new interface driver option
[  155.043541] usbserial: USB Serial support registered for GSM modem (1-port)
[  155.045396] option 1-2:1.0: GSM modem (1-port) converter detected
[  155.047310] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[  155.047436] option 1-2:1.1: GSM modem (1-port) converter detected
[  155.050545] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[  155.056228] usbcore: registered new interface driver cdc_ncm
[  155.075914] huawei_cdc_ncm 1-2:1.2: MAC-Address: 00:1e:10:1f:00:00
[  155.075927] huawei_cdc_ncm 1-2:1.2: setting rx_max = 16384
[  155.080539] huawei_cdc_ncm 1-2:1.2: cdc-wdm0: USB WDM device
[  155.083579] huawei_cdc_ncm 1-2:1.2 wwan0: register 'huawei_cdc_ncm' at 
usb-0000:00:1d.7-2, Huawei CDC NCM device, 00:1e:10:1f:00:00
[  155.084527] usbcore: registered new interface driver huawei_cdc_ncm
[  155.979850] scsi 5:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 
PQ: 0 ANSI: 2
[  155.980632] scsi 5:0:0:0: Attached scsi generic sg1 type 5
[  155.985131] scsi 6:0:0:0: Direct-Access     HUAWEI   TF CARD Storage  2.31 
PQ: 0 ANSI: 2
[  155.986173] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  155.992715] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  156.039610] sr 5:0:0:0: [sr0] scsi-1 drive

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI_MOBILE
S:  Product=HUAWEI_MOBILE
C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=2ms
I:* If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=huawei_cdc_ncm
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Modemmanager recognizes it and it seems to be to be connected. But it isn't. 
Unfortunately I have no recent Modemmanager at my test-notebook, so I will 
present the logfile later.

In Windows I have seen, that it uses AT-commands, ndisconn instead of ndisdup, 
but If I try it manually it doesn't work too.

http://www.cis.uni-muenchen.de/~thomas/UsbSnoop-20140828.log.7z

Maybe you have an idea.

Regards,

Thomas