[Nouveau] [Bug 47846] Nouveau -> overscan using HDMI

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=47846

--- Comment #9 from lameventanas at gmail.com 2012-04-17 05:59:49 PDT ---
　　(In reply to comment #7)
> Does the patch in this bug help?
> 
>   https://bugzilla.redhat.com/show_bug.cgi?id=806091
> 
> You'll need to add "nouveau.hdmi_disable=HDMI-1" (without the quotes) to your
> kernel command line.

Thanks anyway, but it didn't work.
I used nouveau.hdmi_disable=all, got this in my kernel messages:

[drm] nouveau 0000:02:00.0: disabling HDMI functions on output VGA-1
[drm] nouveau 0000:02:00.0: disabling HDMI functions on output HDMI-A-1

But the overscan is still there.

I just realized I never posted my kernel messages before, so here it is:

bash$ dmesg |grep -i nouv
Kernel command line: pcie_aspm=force root=/dev/sda2 ro
initrd_root=/dev/ssd/root quiet nouveau.hdmi_disable=all
nouveau 0000:02:00.0: setting latency timer to 64
[drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x0ac500b1)
[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:02:00.0: ... appears to be valid
[drm] nouveau 0000:02:00.0: BIT BIOS found
[drm] nouveau 0000:02:00.0: Bios version 62.79.3c.00
[drm] nouveau 0000:02:00.0: TMDS table version 2.0
[drm] nouveau 0000:02:00.0: MXM: no VBIOS data, nothing to do
[drm] nouveau 0000:02:00.0: DCB version 4.0
[drm] nouveau 0000:02:00.0: DCB outp 00: 01000300 0000001e
[drm] nouveau 0000:02:00.0: DCB outp 01: 01011322 00020010
[drm] nouveau 0000:02:00.0: DCB conn 00: 00000000
[drm] nouveau 0000:02:00.0: DCB conn 01: 00001161
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xDB11
[drm] nouveau 0000:02:00.0: Register 0x00004028 not found in PLL limits table
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xDDC5
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xDDC7
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xDEAC
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDF71
[drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xDFD6
[drm] nouveau 0000:02:00.0: 0xDFD6: Condition still not met after 20ms,
skipping following opcodes
[drm] nouveau 0000:02:00.0: 1 available performance level(s)
[drm] nouveau 0000:02:00.0: 3: core 580MHz shader 1400MHz voltage 1200mV
fanspeed 100%
[drm] nouveau 0000:02:00.0: c:
[drm] nouveau 0000:02:00.0: Detected 256MiB VRAM
[drm] nouveau 0000:02:00.0: Stolen system memory at: 0x0070000000
[drm] nouveau 0000:02:00.0: 64 MiB GART (aperture)
[drm] nouveau 0000:02:00.0: disabling HDMI functions on output VGA-1
[drm] nouveau 0000:02:00.0: disabling HDMI functions on output HDMI-A-1
[drm] nouveau 0000:02:00.0: allocated 1280x720 fb: 0x2f0000, bo f4e85c00
fbcon: nouveaufb (fb0) is primary device
fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0


By the way, my TV is a Sharp Aquos LC-32DE5

-- 
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.