[Nouveau] [PATCH] drm/nouveau/kms: Fix NULL pointer dereference in nouveau_connector_detect_depth

Alexander Kapshuk alexander.kapshuk at gmail.com
Fri Oct 9 18:11:20 UTC 2020


This oops manifests itself on the following hardware:
01:00.0 VGA compatible controller: NVIDIA Corporation G98M [GeForce G 103M] (rev a1)

Oct 09 14:17:46 lp-sasha kernel: BUG: kernel NULL pointer dereference, address: 0000000000000000
Oct 09 14:17:46 lp-sasha kernel: #PF: supervisor read access in kernel mode
Oct 09 14:17:46 lp-sasha kernel: #PF: error_code(0x0000) - not-present page
Oct 09 14:17:46 lp-sasha kernel: PGD 0 P4D 0
Oct 09 14:17:46 lp-sasha kernel: Oops: 0000 [#1] SMP PTI
Oct 09 14:17:46 lp-sasha kernel: CPU: 1 PID: 191 Comm: systemd-udevd Not tainted 5.9.0-rc8-next-20201009 #38
Oct 09 14:17:46 lp-sasha kernel: Hardware name: Hewlett-Packard Compaq Presario CQ61 Notebook PC/306A, BIOS F.03 03/23/2009
Oct 09 14:17:46 lp-sasha kernel: RIP: 0010:nouveau_connector_detect_depth+0x71/0xc0 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75
Oct 09 14:17:46 lp-sasha kernel: RSP: 0018:ffffc9000028f8c0 EFLAGS: 00010297
Oct 09 14:17:46 lp-sasha kernel: RAX: 0000000000014c08 RBX: ffff8880369d4000 RCX: ffff8880369d3000
Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: ffff8880369d4000
Oct 09 14:17:46 lp-sasha kernel: RBP: ffff88800601cc00 R08: ffff8880051da298 R09: ffffffff8226201a
Oct 09 14:17:46 lp-sasha kernel: R10: ffff88800469aa80 R11: ffff888004c84ff8 R12: 0000000000000000
Oct 09 14:17:46 lp-sasha kernel: R13: ffff8880051da000 R14: 0000000000002000 R15: 0000000000000003
Oct 09 14:17:46 lp-sasha kernel: FS:  00007fd0192b3440(0000) GS:ffff8880bc900000(0000) knlGS:0000000000000000
Oct 09 14:17:46 lp-sasha kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 CR3: 0000000004976000 CR4: 00000000000006e0
Oct 09 14:17:46 lp-sasha kernel: Call Trace:
Oct 09 14:17:46 lp-sasha kernel:  nouveau_connector_get_modes+0x1e6/0x240 [nouveau]
Oct 09 14:17:46 lp-sasha kernel:  ? kfree+0xb9/0x240
Oct 09 14:17:46 lp-sasha kernel:  ? drm_connector_list_iter_next+0x7c/0xa0
Oct 09 14:17:46 lp-sasha kernel:  drm_helper_probe_single_connector_modes+0x1ba/0x7c0
Oct 09 14:17:46 lp-sasha kernel:  drm_client_modeset_probe+0x27e/0x1360
Oct 09 14:17:46 lp-sasha kernel:  ? nvif_object_sclass_put+0xc/0x20 [nouveau]
Oct 09 14:17:46 lp-sasha kernel:  ? nouveau_cli_init+0x3cc/0x440 [nouveau]
Oct 09 14:17:46 lp-sasha kernel:  ? ktime_get_mono_fast_ns+0x49/0xa0
Oct 09 14:17:46 lp-sasha kernel:  ? nouveau_drm_open+0x4e/0x180 [nouveau]
Oct 09 14:17:46 lp-sasha kernel:  __drm_fb_helper_initial_config_and_unlock+0x3f/0x4a0
Oct 09 14:17:46 lp-sasha kernel:  ? drm_file_alloc+0x18f/0x260
Oct 09 14:17:46 lp-sasha kernel:  ? mutex_lock+0x9/0x40
Oct 09 14:17:46 lp-sasha kernel:  ? drm_client_init+0x110/0x160
Oct 09 14:17:46 lp-sasha kernel:  nouveau_fbcon_init+0x14d/0x1c0 [nouveau]
Oct 09 14:17:46 lp-sasha kernel:  nouveau_drm_device_init+0x1c0/0x880 [nouveau]
Oct 09 14:17:46 lp-sasha kernel:  nouveau_drm_probe+0x11a/0x1e0 [nouveau]
Oct 09 14:17:46 lp-sasha kernel:  pci_device_probe+0xcd/0x140
Oct 09 14:17:46 lp-sasha kernel:  really_probe+0xd8/0x400
Oct 09 14:17:46 lp-sasha kernel:  driver_probe_device+0x4a/0xa0
Oct 09 14:17:46 lp-sasha kernel:  device_driver_attach+0x9c/0xc0
Oct 09 14:17:46 lp-sasha kernel:  __driver_attach+0x6f/0x100
Oct 09 14:17:46 lp-sasha kernel:  ? device_driver_attach+0xc0/0xc0
Oct 09 14:17:46 lp-sasha kernel:  bus_for_each_dev+0x75/0xc0
Oct 09 14:17:46 lp-sasha kernel:  bus_add_driver+0x106/0x1c0
Oct 09 14:17:46 lp-sasha kernel:  driver_register+0x86/0xe0
Oct 09 14:17:46 lp-sasha kernel:  ? 0xffffffffa044e000
Oct 09 14:17:46 lp-sasha kernel:  do_one_initcall+0x48/0x1e0
Oct 09 14:17:46 lp-sasha kernel:  ? _cond_resched+0x11/0x60
Oct 09 14:17:46 lp-sasha kernel:  ? kmem_cache_alloc_trace+0x19c/0x1e0
Oct 09 14:17:46 lp-sasha kernel:  do_init_module+0x57/0x220
Oct 09 14:17:46 lp-sasha kernel:  __do_sys_finit_module+0xa0/0xe0
Oct 09 14:17:46 lp-sasha kernel:  do_syscall_64+0x33/0x40
Oct 09 14:17:46 lp-sasha kernel:  entry_SYSCALL_64_after_hwframe+0x44/0xa9
Oct 09 14:17:46 lp-sasha kernel: RIP: 0033:0x7fd01a060d5d
Oct 09 14:17:46 lp-sasha kernel: Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e3 70 0c 00 f7 d8 64 89 01 48
Oct 09 14:17:46 lp-sasha kernel: RSP: 002b:00007ffc8ad38a98 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
Oct 09 14:17:46 lp-sasha kernel: RAX: ffffffffffffffda RBX: 0000563f6e7fd530 RCX: 00007fd01a060d5d
Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000000 RSI: 00007fd01a19f95d RDI: 000000000000000f
Oct 09 14:17:46 lp-sasha kernel: RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000007
Oct 09 14:17:46 lp-sasha kernel: R10: 000000000000000f R11: 0000000000000246 R12: 00007fd01a19f95d
Oct 09 14:17:46 lp-sasha kernel: R13: 0000000000000000 R14: 0000563f6e7fbc10 R15: 0000563f6e7fd530
Oct 09 14:17:46 lp-sasha kernel: Modules linked in: nouveau(+) ttm xt_string xt_mark xt_LOG vgem v4l2_dv_timings uvcvideo ulpi udf ts_kmp ts_fsm ts_bm snd_aloop sil164 qat_dh895xccvf nf_nat_sip nf_nat_irc nf_nat_ftp nf_nat nf_log_ipv6 nf_log_ipv4 nf_log_common ltc2990 lcd intel_qat input_leds i2c_mux gspca_main videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc drivetemp cuse fuse crc_itu_t coretemp ch7006 ath5k ath algif_hash
Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000
Oct 09 14:17:46 lp-sasha kernel: ---[ end trace 0ddafe218ad30017 ]---
Oct 09 14:17:46 lp-sasha kernel: RIP: 0010:nouveau_connector_detect_depth+0x71/0xc0 [nouveau]
Oct 09 14:17:46 lp-sasha kernel: Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75
Oct 09 14:17:46 lp-sasha kernel: RSP: 0018:ffffc9000028f8c0 EFLAGS: 00010297
Oct 09 14:17:46 lp-sasha kernel: RAX: 0000000000014c08 RBX: ffff8880369d4000 RCX: ffff8880369d3000
Oct 09 14:17:46 lp-sasha kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: ffff8880369d4000
Oct 09 14:17:46 lp-sasha kernel: RBP: ffff88800601cc00 R08: ffff8880051da298 R09: ffffffff8226201a
Oct 09 14:17:46 lp-sasha kernel: R10: ffff88800469aa80 R11: ffff888004c84ff8 R12: 0000000000000000
Oct 09 14:17:46 lp-sasha kernel: R13: ffff8880051da000 R14: 0000000000002000 R15: 0000000000000003
Oct 09 14:17:46 lp-sasha kernel: FS:  00007fd0192b3440(0000) GS:ffff8880bc900000(0000) knlGS:0000000000000000
Oct 09 14:17:46 lp-sasha kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Oct 09 14:17:46 lp-sasha kernel: CR2: 0000000000000000 CR3: 0000000004976000 CR4: 00000000000006e0

The disassembly:
Code: 0a 00 00 48 8b 49 48 c7 87 b8 00 00 00 06 00 00 00 80 b9 4d 0a 00 00 00 75 1e 83 fa 41 75 05 48 85 c0 75 29 8b 81 10 0d 00 00 <39> 06 7c 25 f6 81 14 0d 00 00 02 75 b7 c3 80 b9 0c 0d 00 00 00 75
All code
========
   0:   0a 00                   or     (%rax),%al
   2:   00 48 8b                add    %cl,-0x75(%rax)
   5:   49                      rex.WB
   6:   48 c7 87 b8 00 00 00    movq   $0x6,0xb8(%rdi)
   d:   06 00 00 00
  11:   80 b9 4d 0a 00 00 00    cmpb   $0x0,0xa4d(%rcx)
  18:   75 1e                   jne    0x38
  1a:   83 fa 41                cmp    $0x41,%edx
  1d:   75 05                   jne    0x24
  1f:   48 85 c0                test   %rax,%rax
  22:   75 29                   jne    0x4d
  24:   8b 81 10 0d 00 00       mov    0xd10(%rcx),%eax
  2a:*  39 06                   cmp    %eax,(%rsi)              <-- trapping instruction
  2c:   7c 25                   jl     0x53
  2e:   f6 81 14 0d 00 00 02    testb  $0x2,0xd14(%rcx)
  35:   75 b7                   jne    0xffffffffffffffee
  37:   c3                      retq
  38:   80 b9 0c 0d 00 00 00    cmpb   $0x0,0xd0c(%rcx)
  3f:   75                      .byte 0x75

Code starting with the faulting instruction
===========================================
   0:   39 06                   cmp    %eax,(%rsi)
   2:   7c 25                   jl     0x29
   4:   f6 81 14 0d 00 00 02    testb  $0x2,0xd14(%rcx)
   b:   75 b7                   jne    0xffffffffffffffc4
   d:   c3                      retq
   e:   80 b9 0c 0d 00 00 00    cmpb   $0x0,0xd0c(%rcx)
  15:   75                      .byte 0x75

objdump -SF --disassemble=nouveau_connector_detect_depth
[...]
        if (nv_connector->edid &&
   c85e1:       83 fa 41                cmp    $0x41,%edx
   c85e4:       75 05                   jne    c85eb <nouveau_connector_detect_depth+0x6b> (File Offset: 0xc866b)
   c85e6:       48 85 c0                test   %rax,%rax
   c85e9:       75 29                   jne    c8614 <nouveau_connector_detect_depth+0x94> (File Offset: 0xc8694)
            nv_connector->type == DCB_CONNECTOR_LVDS_SPWG)
                duallink = ((u8 *)nv_connector->edid)[121] == 2;
        else
                duallink = mode->clock >= bios->fp.duallink_transition_clk;

        if ((!duallink && (bios->fp.strapless_is_24bit & 1)) ||
   c85eb:       8b 81 10 0d 00 00       mov    0xd10(%rcx),%eax
   c85f1:       39 06                   cmp    %eax,(%rsi)
   c85f3:       7c 25                   jl     c861a <nouveau_connector_detect_depth+0x9a> (File Offset: 0xc869a)
            ( duallink && (bios->fp.strapless_is_24bit & 2)))
   c85f5:       f6 81 14 0d 00 00 02    testb  $0x2,0xd14(%rcx)
   c85fc:       75 b7                   jne    c85b5 <nouveau_connector_detect_depth+0x35> (File Offset: 0xc8635)
                connector->display_info.bpc = 8;
[...]

% scripts/faddr2line /lib/modules/5.9.0-rc8-next-20201009/kernel/drivers/gpu/drm/nouveau/nouveau.ko nouveau_connector_detect_depth+0x71/0xc0
nouveau_connector_detect_depth+0x71/0xc0:
nouveau_connector_detect_depth at /home/sasha/linux-next/drivers/gpu/drm/nouveau/nouveau_connector.c:891

It is actually line 889. See the disassembly above.
889                     duallink = mode->clock >= bios->fp.duallink_transition_clk;

The NULL pointer being dereferenced is mode.

Git bisect has identified the following commit as bad:
f28e32d3906e drm/nouveau/kms: Don't change EDID when it hasn't actually changed

Here is the chain of events that causes the oops.
On entry to nouveau_connector_detect_lvds, edid is set to NULL.
The call to nouveau_connector_detect sets nv_connector->edid to valid
memory, with status being set to connector_status_connected and the flow
of execution branching to the out label.

The subsequent call to nouveau_connector_set_edid erronously clears
nv_connector->edid, via the local edid pointer which remains set to NULL.

Fix this by setting edid to the value of the just acquired
nv_connector->edid and call nouveau_connector_set_edid in the out label
only if nv_connector->edid and edid point to different memory addresses
thus preventing nv_connector->edid from being turned into a dangling
pointer.

Fixes: f28e32d3906e ("drm/nouveau/kms: Don't change EDID when it hasn't actually changed")
Signed-off-by: Alexander Kapshuk <alexander.kapshuk at gmail.com>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 49dd0cbc332f..a3f53d2ac86e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -669,8 +669,10 @@ nouveau_connector_detect_lvds(struct drm_connector *connector, bool force)
 	/* Try retrieving EDID via DDC */
 	if (!drm->vbios.fp_no_ddc) {
 		status = nouveau_connector_detect(connector, force);
-		if (status == connector_status_connected)
+		if (status == connector_status_connected) {
+			edid = nv_connector->edid;
 			goto out;
+		}
 	}

 	/* On some laptops (Sony, i'm looking at you) there appears to
@@ -720,7 +722,8 @@ nouveau_connector_detect_lvds(struct drm_connector *connector, bool force)
 		status = connector_status_unknown;
 #endif

-	nouveau_connector_set_edid(nv_connector, edid);
+	if (nv_connector->edid != edid)
+		nouveau_connector_set_edid(nv_connector, edid);
 	nouveau_connector_set_encoder(connector, nv_encoder);
 	return status;
 }
--
2.28.0



More information about the Nouveau mailing list