[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-5-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1) ) #24-Ubuntu SMP Sat Aug 1 12:47:58 UTC 2009 (Ubuntu 2.6.31-5.24-generic) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.31-5-generic root=UUID=d92ee209-c032-4c4e-8e41-be8df8b8f231 ro nouveau.modeset=1 nouveau.uscript_lvds=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fed0000 (usable) [ 0.000000] BIOS-e820: 000000003fed0000 - 000000003fee1000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee1000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x3fed0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fed0000 (usable) [ 0.000000] modified: 000000003fed0000 - 000000003fee1000 (ACPI NVS) [ 0.000000] modified: 000000003fee1000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000003fed0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 003fe00000 page 2M [ 0.000000] 003fe00000 - 003fed0000 page 4k [ 0.000000] kernel direct mapping tables up to 3fed0000 @ 8000-b000 [ 0.000000] RAMDISK: 2f82c000 - 2ff5bc5b [ 0.000000] ACPI: RSDP 00000000000f7b40 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 000000003fed3937 0007C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 000000003feddc2a 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 000000003fed4db5 08E01 (v02 INTEL CRESTLNE 06040000 MSFT 03000001) [ 0.000000] ACPI: FACS 000000003fee0fc0 00040 [ 0.000000] ACPI: APIC 000000003feddd1e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 000000003feddd86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 000000003fedddbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 000000003fedddfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 000000003fedde62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 000000003fedde8a 00176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000) [ 0.000000] ACPI: SSDT 000000003fed4ad8 002DD (v01 SataRe SataAhci 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 000000003fed3f3f 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 000000003fed3e99 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 000000003fed39b3 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003fed0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003fed0000 [ 0.000000] NODE_DATA [0000000000009000 - 000000000000dfff] [ 0.000000] bootmap [000000000000e000 - 0000000000015fdf] pages 8 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003fed0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019b608c] TEXT DATA BSS ==> [0001000000 - 00019b608c] [ 0.000000] #3 [002f82c000 - 002ff5bc5b] RAMDISK ==> [002f82c000 - 002ff5bc5b] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00019b7000 - 00019b7178] BRK ==> [00019b7000 - 00019b7178] [ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] found SMP MP-table at [ffff8800000f7b70] f7b70 [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001e00000-ffff880002bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fed0 [ 0.000000] On node 0 totalpages: 261738 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 100 pages reserved [ 0.000000] DMA zone: 3838 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3524 pages used for memmap [ 0.000000] DMA32 zone: 254220 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff8800019c2000, static data 89952 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258058 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-5-generic root=UUID=d92ee209-c032-4c4e-8e41-be8df8b8f231 ro nouveau.modeset=1 nouveau.uscript_lvds=1 [ 0.000000] Unknown boot option `nouveau.modeset=1': ignoring [ 0.000000] Unknown boot option `nouveau.uscript_lvds=1': ignoring [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1014932k/1047360k available (5266k kernel code, 408k absent, 32020k reserved, 2974k data, 652k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1833.277 MHz processor. [ 0.001977] Console: colour VGA+ 80x25 [ 0.001980] console [tty0] enabled [ 0.004000] allocated 10485760 bytes of page_cgroup [ 0.004000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.55 BogoMIPS (lpj=7333108) [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU 0/0x0 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Performance Counters: Core2 events, Intel PMU driver. [ 0.004000] ... version: 2 [ 0.004000] ... bit width: 40 [ 0.004000] ... generic counters: 2 [ 0.004000] ... value mask: 000000ffffffffff [ 0.004000] ... max period: 000000007fffffff [ 0.004000] ... fixed-purpose counters: 3 [ 0.004000] ... counter mask: 0000000700000003 [ 0.004018] ACPI: Core revision 20090521 [ 0.020068] Setting APIC routing to flat [ 0.020488] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.060975] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3666.92 BogoMIPS (lpj=7333859) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.148431] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.149078] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.152027] Brought up 2 CPUs [ 0.152094] Total of 2 processors activated (7333.48 BogoMIPS). [ 0.153417] CPU0 attaching sched-domain: [ 0.153420] domain 0: span 0-1 level MC [ 0.153423] groups: 0 1 [ 0.153429] CPU1 attaching sched-domain: [ 0.153432] domain 0: span 0-1 level MC [ 0.153434] groups: 1 0 [ 0.153519] Booting paravirtualized kernel on bare hardware [ 0.153519] regulator: core version 0.5 [ 0.153519] Time: 0:31:46 Date: 08/08/09 [ 0.153519] NET: Registered protocol family 16 [ 0.156029] ACPI: bus type pci registered [ 0.156101] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.156119] PCI: MCFG area at e0000000 reserved in E820 [ 0.159059] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.159126] PCI: Using configuration type 1 for base access [ 0.160098] bio: create slab at 0 [ 0.165091] ACPI: EC: Look up EC in DSDT [ 0.169637] ACPI: BIOS _OSI(Linux) query ignored [ 0.170994] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.684006] ACPI: EC: missing confirmations, switch off interrupt mode. [ 1.140085] ACPI: Interpreter enabled [ 1.140154] ACPI: (supports S0 S3 S4 S5) [ 1.140443] ACPI: Using IOAPIC for interrupt routing [ 1.204077] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 1.204149] ACPI: EC: driver started in poll mode [ 1.204336] ACPI: No dock devices found. [ 1.205029] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.205214] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND [ 1.205480] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.205581] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.205581] pci 0000:00:01.0: PME# disabled [ 1.205581] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] [ 1.205581] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] [ 1.205581] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf3504800-0xf3504bff] [ 1.205581] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.205581] pci 0000:00:1a.7: PME# disabled [ 1.205581] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3500000-0xf3503fff] [ 1.205581] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.205581] pci 0000:00:1b.0: PME# disabled [ 1.205581] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.205581] pci 0000:00:1c.0: PME# disabled [ 1.205581] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.205581] pci 0000:00:1c.3: PME# disabled [ 1.205581] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.205581] pci 0000:00:1c.5: PME# disabled [ 1.205702] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f] [ 1.205780] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f] [ 1.205863] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f] [ 1.205940] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3504c00-0xf3504fff] [ 1.206005] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.206077] pci 0000:00:1d.7: PME# disabled [ 1.208171] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 1.208255] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 1.208326] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 1.208409] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 003f) [ 1.208494] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007) [ 1.208624] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 1.208632] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 1.208641] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 1.208649] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 1.208657] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af] [ 1.208732] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df] [ 1.208740] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf] [ 1.208748] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7] [ 1.208756] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb] [ 1.208764] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 1.208773] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf3504000-0xf35047ff] [ 1.208816] pci 0000:00:1f.2: PME# supported from D3hot [ 1.208886] pci 0000:00:1f.2: PME# disabled [ 1.208982] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 1.209007] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 1.209097] pci 0000:01:00.0: reg 10 32bit mmio: [0xf2000000-0xf2ffffff] [ 1.209114] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 1.209131] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf0000000-0xf1ffffff] [ 1.209141] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f] [ 1.209152] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 1.209263] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 1.209267] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf2ffffff] [ 1.209272] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.209333] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] [ 1.209338] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 1.209346] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 1.209526] pci 0000:06:00.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 1.209761] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.209840] pci 0000:06:00.0: PME# disabled [ 1.210018] pci 0000:00:1c.3: bridge io port: [0x00-0xfff] [ 1.210023] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff] [ 1.210031] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 1.210248] pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x00ffff] [ 1.210478] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 1.210561] pci 0000:08:00.0: PME# disabled [ 1.210761] pci 0000:00:1c.5: bridge io port: [0x00-0xfff] [ 1.210767] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff] [ 1.210775] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 1.210836] pci 0000:0a:09.0: reg 10 32bit mmio: [0xf3200000-0xf32007ff] [ 1.210893] pci 0000:0a:09.0: supports D1 D2 [ 1.210896] pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.210970] pci 0000:0a:09.0: PME# disabled [ 1.211077] pci 0000:0a:09.1: reg 10 32bit mmio: [0xf3200800-0xf32008ff] [ 1.211140] pci 0000:0a:09.1: supports D1 D2 [ 1.211142] pci 0000:0a:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.211215] pci 0000:0a:09.1: PME# disabled [ 1.211325] pci 0000:0a:09.2: reg 10 32bit mmio: [0xf3200c00-0xf3200cff] [ 1.211384] pci 0000:0a:09.2: supports D1 D2 [ 1.211387] pci 0000:0a:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.211459] pci 0000:0a:09.2: PME# disabled [ 1.211567] pci 0000:0a:09.3: reg 10 32bit mmio: [0xf3201000-0xf32010ff] [ 1.211627] pci 0000:0a:09.3: supports D1 D2 [ 1.211630] pci 0000:0a:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.211702] pci 0000:0a:09.3: PME# disabled [ 1.211812] pci 0000:0a:09.4: reg 10 32bit mmio: [0xf3201400-0xf32014ff] [ 1.211872] pci 0000:0a:09.4: supports D1 D2 [ 1.211874] pci 0000:0a:09.4: PME# supported from D0 D1 D2 D3hot D3cold [ 1.211947] pci 0000:0a:09.4: PME# disabled [ 1.212058] pci 0000:00:1e.0: transparent bridge [ 1.212131] pci 0000:00:1e.0: bridge 32bit mmio: [0xf3200000-0xf32fffff] [ 1.212170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.212415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 1.212506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.212596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 1.212674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 1.212785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.212885] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.213071] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND [ 1.224658] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 1.224880] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.225723] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.228681] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.229523] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.230417] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.231202] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 1.232064] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 1.232791] SCSI subsystem initialized [ 1.232791] libata version 3.00 loaded. [ 1.232791] usbcore: registered new interface driver usbfs [ 1.232791] usbcore: registered new interface driver hub [ 1.232791] usbcore: registered new device driver usb [ 1.232791] ACPI: WMI: Mapper loaded [ 1.232791] PCI: Using ACPI for IRQ routing [ 1.232791] pci 0000:00:1c.0: BAR 13: can't allocate resource [ 1.232791] pci 0000:00:1c.0: BAR 14: can't allocate resource [ 1.232791] pci 0000:00:1c.0: BAR 15: can't allocate resource [ 1.232791] pci 0000:00:1c.3: BAR 13: can't allocate resource [ 1.232791] pci 0000:00:1c.3: BAR 14: can't allocate resource [ 1.232791] pci 0000:00:1c.3: BAR 15: can't allocate resource [ 1.232791] pci 0000:00:1c.5: BAR 13: can't allocate resource [ 1.232791] pci 0000:00:1c.5: BAR 14: can't allocate resource [ 1.232791] pci 0000:00:1c.5: BAR 15: can't allocate resource [ 1.248011] Bluetooth: Core ver 2.15 [ 1.248096] NET: Registered protocol family 31 [ 1.248096] Bluetooth: HCI device and connection manager initialized [ 1.248162] Bluetooth: HCI socket layer initialized [ 1.248231] NET: Registered protocol family 8 [ 1.248297] NET: Registered protocol family 20 [ 1.248384] NetLabel: Initializing [ 1.248384] NetLabel: domain hash size = 128 [ 1.248384] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.248384] NetLabel: unlabeled traffic allowed by default [ 1.248384] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.248384] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.256017] Switched to high resolution mode on CPU 0 [ 1.257217] Switched to high resolution mode on CPU 1 [ 1.272011] pnp: PnP ACPI init [ 1.272091] ACPI: bus type pnp registered [ 1.274926] pnp: PnP ACPI: found 11 devices [ 1.274995] ACPI: ACPI bus type pnp unregistered [ 1.275073] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 1.275144] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 1.275216] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 1.275288] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 1.275359] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 1.275430] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 1.275501] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 1.275573] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 1.275649] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 1.275726] system 00:06: ioport range 0x680-0x69f has been reserved [ 1.275796] system 00:06: ioport range 0x800-0x80f has been reserved [ 1.275866] system 00:06: ioport range 0x1000-0x107f has been reserved [ 1.275936] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 1.276014] system 00:06: ioport range 0x1640-0x164f has been reserved [ 1.276085] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 1.281184] AppArmor: AppArmor Filesystem Enabled [ 1.281343] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] [ 1.281427] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.281497] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 1.281568] pci 0000:00:01.0: MEM window: 0xf0000000-0xf2ffffff [ 1.281639] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 1.281725] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 1.281794] pci 0000:00:1c.0: IO window: disabled [ 1.281866] pci 0000:00:1c.0: MEM window: disabled [ 1.281936] pci 0000:00:1c.0: PREFETCH window: disabled [ 1.282059] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 1.282127] pci 0000:00:1c.3: IO window: disabled [ 1.282199] pci 0000:00:1c.3: MEM window: 0x40000000-0x400fffff [ 1.282271] pci 0000:00:1c.3: PREFETCH window: disabled [ 1.282396] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 [ 1.282465] pci 0000:00:1c.5: IO window: disabled [ 1.282537] pci 0000:00:1c.5: MEM window: 0x40100000-0x401fffff [ 1.282609] pci 0000:00:1c.5: PREFETCH window: disabled [ 1.282681] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 1.282750] pci 0000:00:1e.0: IO window: disabled [ 1.282822] pci 0000:00:1e.0: MEM window: 0xf3200000-0xf32fffff [ 1.282894] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.282973] alloc irq_desc for 16 on node 0 [ 1.282975] alloc kstat_irqs on node 0 [ 1.282980] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.283053] pci 0000:00:01.0: setting latency timer to 64 [ 1.283061] alloc irq_desc for 17 on node 0 [ 1.283063] alloc kstat_irqs on node 0 [ 1.283067] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.283141] pci 0000:00:1c.0: setting latency timer to 64 [ 1.283150] pci 0000:00:1c.3: enabling device (0000 -> 0002) [ 1.283221] alloc irq_desc for 19 on node 0 [ 1.283222] alloc kstat_irqs on node 0 [ 1.283226] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.283300] pci 0000:00:1c.3: setting latency timer to 64 [ 1.283308] pci 0000:00:1c.5: enabling device (0000 -> 0002) [ 1.283379] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.283453] pci 0000:00:1c.5: setting latency timer to 64 [ 1.283461] pci 0000:00:1e.0: setting latency timer to 64 [ 1.283466] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.283470] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.283473] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 1.283475] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf2ffffff] [ 1.283478] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 1.283481] pci_bus 0000:02: resource 0 mem: [0x0-0xfff] [ 1.283483] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff] [ 1.283486] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff] [ 1.283488] pci_bus 0000:06: resource 0 mem: [0x0-0xfff] [ 1.283491] pci_bus 0000:06: resource 1 mem: [0x40000000-0x400fffff] [ 1.283494] pci_bus 0000:06: resource 2 mem: [0x0-0xfffff] [ 1.283496] pci_bus 0000:08: resource 0 mem: [0x0-0xfff] [ 1.283499] pci_bus 0000:08: resource 1 mem: [0x40100000-0x401fffff] [ 1.283501] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff] [ 1.283504] pci_bus 0000:0a: resource 1 mem: [0xf3200000-0xf32fffff] [ 1.283506] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] [ 1.283509] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.283550] NET: Registered protocol family 2 [ 1.283749] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 1.284443] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 1.285650] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.286529] TCP: Hash tables configured (established 131072 bind 65536) [ 1.286599] TCP reno registered [ 1.286811] NET: Registered protocol family 1 [ 1.286970] Trying to unpack rootfs image as initramfs... [ 1.481259] Freeing initrd memory: 7359k freed [ 1.486931] Simple Boot Flag at 0x35 set to 0x1 [ 1.487556] Scanning for low memory corruption every 60 seconds [ 1.487960] audit: initializing netlink socket (disabled) [ 1.488060] type=2000 audit(1249691507.488:1): initialized [ 1.498788] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.502035] VFS: Disk quotas dquot_6.5.2 [ 1.502202] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.503468] fuse init (API version 7.12) [ 1.503711] msgmni has been set to 1996 [ 1.504212] alg: No test for stdrng (krng) [ 1.504289] io scheduler noop registered [ 1.504357] io scheduler anticipatory registered [ 1.504425] io scheduler deadline registered [ 1.505773] io scheduler cfq registered (default) [ 1.506008] pci 0000:01:00.0: Boot video device [ 1.506199] alloc irq_desc for 24 on node 0 [ 1.506202] alloc kstat_irqs on node 0 [ 1.506213] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 1.506220] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.506476] alloc irq_desc for 25 on node 0 [ 1.506479] alloc kstat_irqs on node 0 [ 1.506489] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 1.506501] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.506787] alloc irq_desc for 26 on node 0 [ 1.506789] alloc kstat_irqs on node 0 [ 1.506799] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X [ 1.506811] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.507090] alloc irq_desc for 27 on node 0 [ 1.507092] alloc kstat_irqs on node 0 [ 1.507102] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 1.507114] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 1.507377] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.507520] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.507714] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND [ 1.508047] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.508239] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND [ 1.508554] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.508746] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND [ 1.509059] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.509250] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND [ 1.509644] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.509835] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND [ 1.510149] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.510342] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND [ 1.510654] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.510845] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND [ 1.511157] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.511350] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND [ 1.511669] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.564128] ACPI: AC Adapter [ACAD] (on-line) [ 1.564322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.564408] ACPI: Power Button [PWRF] [ 1.564570] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.564719] ACPI: Lid Switch [LID] [ 1.564865] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 1.564950] ACPI: Power Button [PWRB] [ 1.565094] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 1.565179] ACPI: Sleep Button [SLPB] [ 1.566013] ACPI: SSDT 000000003fed481a 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 1.566754] ACPI: SSDT 000000003fed419e 005F7 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 1.569205] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843 [ 1.569784] Monitor-Mwait will be used to enter C-1 state [ 1.569810] Monitor-Mwait will be used to enter C-2 state [ 1.569832] Monitor-Mwait will be used to enter C-3 state [ 1.569838] Marking TSC unstable due to TSC halts in idle [ 1.569956] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.570292] processor LNXCPU:00: registered as cooling_device0 [ 1.570365] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.570933] ACPI: SSDT 000000003fed4a10 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 1.571508] ACPI: SSDT 000000003fed4795 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 1.572270] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843 [ 1.572986] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.573332] processor LNXCPU:01: registered as cooling_device1 [ 1.573405] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.796068] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.796146] ACPI: Thermal Zone [THRM] (74 C) [ 1.796382] ACPI: Battery Slot [BAT1] (battery absent) [ 1.800076] Linux agpgart interface v0.103 [ 1.800149] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.800539] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 1.803008] brd: module loaded [ 1.804095] loop: module loaded [ 1.804353] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.804696] ahci 0000:00:1f.2: version 3.0 [ 1.804717] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.804835] alloc irq_desc for 28 on node 0 [ 1.804837] alloc kstat_irqs on node 0 [ 1.804851] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 1.804924] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 1.805014] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 1.805102] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.805392] scsi0 : ahci [ 1.805652] scsi1 : ahci [ 1.805856] scsi2 : ahci [ 1.806134] ata1: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504100 irq 28 [ 1.806219] ata2: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504180 irq 28 [ 1.806303] ata3: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504200 irq 28 [ 1.806570] ata_piix 0000:00:1f.1: version 2.13 [ 1.806580] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.806694] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.806777] scsi3 : ata_piix [ 1.806986] scsi4 : ata_piix [ 1.807821] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 1.807895] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 1.810393] Fixed MDIO Bus: probed [ 1.810467] PPP generic driver version 2.4.2 [ 1.810777] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.810903] alloc irq_desc for 18 on node 0 [ 1.810906] alloc kstat_irqs on node 0 [ 1.810913] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.811003] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.811007] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.811147] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.815148] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.815223] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.815240] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3504800 [ 1.832099] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.832303] usb usb1: configuration #1 chosen from 1 choice [ 1.832442] hub 1-0:1.0: USB hub found [ 1.832518] hub 1-0:1.0: 4 ports detected [ 1.832682] alloc irq_desc for 23 on node 0 [ 1.832685] alloc kstat_irqs on node 0 [ 1.832691] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.832775] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.832779] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.832918] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.836908] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.836983] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.836998] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3504c00 [ 1.852013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.852192] usb usb2: configuration #1 chosen from 1 choice [ 1.852323] hub 2-0:1.0: USB hub found [ 1.852398] hub 2-0:1.0: 6 ports detected [ 1.852569] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.852689] uhci_hcd: USB Universal Host Controller Interface driver [ 1.852887] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.852967] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.852971] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.853112] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.853233] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 1.853419] usb usb3: configuration #1 chosen from 1 choice [ 1.853552] hub 3-0:1.0: USB hub found [ 1.853625] hub 3-0:1.0: 2 ports detected [ 1.853775] alloc irq_desc for 21 on node 0 [ 1.853778] alloc kstat_irqs on node 0 [ 1.853783] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.853861] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.853865] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.854003] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.854122] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 1.854314] usb usb4: configuration #1 chosen from 1 choice [ 1.854448] hub 4-0:1.0: USB hub found [ 1.854523] hub 4-0:1.0: 2 ports detected [ 1.854674] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.854752] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.854756] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.854895] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.855007] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 1.855206] usb usb5: configuration #1 chosen from 1 choice [ 1.855338] hub 5-0:1.0: USB hub found [ 1.855411] hub 5-0:1.0: 2 ports detected [ 1.855563] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.855641] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.855645] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.855781] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.855901] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 1.856100] usb usb6: configuration #1 chosen from 1 choice [ 1.856230] hub 6-0:1.0: USB hub found [ 1.856304] hub 6-0:1.0: 2 ports detected [ 1.856454] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.856532] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.856536] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.856667] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.856778] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 1.856969] usb usb7: configuration #1 chosen from 1 choice [ 1.857102] hub 7-0:1.0: USB hub found [ 1.857176] hub 7-0:1.0: 2 ports detected [ 1.857440] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.857535] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 1.859318] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.860717] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.860791] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.860862] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.860935] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.861018] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.861372] mice: PS/2 mouse device common for all mice [ 1.861910] rtc_cmos 00:07: RTC can wake from S4 [ 1.862057] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.862159] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.862434] device-mapper: uevent: version 1.0.3 [ 1.862656] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.862829] device-mapper: multipath: version 1.1.0 loaded [ 1.862903] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.864684] cpuidle: using governor ladder [ 1.865399] cpuidle: using governor menu [ 1.865963] TCP cubic registered [ 1.866346] NET: Registered protocol family 10 [ 1.866927] lo: Disabled Privacy Extensions [ 1.867311] NET: Registered protocol family 17 [ 1.867460] Bluetooth: L2CAP ver 2.13 [ 1.867529] Bluetooth: L2CAP socket layer initialized [ 1.867601] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.867671] Bluetooth: SCO socket layer initialized [ 1.867783] Bluetooth: RFCOMM socket layer initialized [ 1.867864] Bluetooth: RFCOMM TTY layer initialized [ 1.867933] Bluetooth: RFCOMM ver 1.11 [ 1.868982] PM: Resume from disk failed. [ 1.868997] registered taskstats version 1 [ 1.869251] Magic number: 5:87:506 [ 1.869429] rtc_cmos 00:07: setting system clock to 2009-08-08 00:31:48 UTC (1249691508) [ 1.869514] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.869585] EDD information not available. [ 1.893725] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.988439] ata4.00: ATAPI: TSSTcorp CDDVDW TS-L632H, AC01, max UDMA/33 [ 2.001065] Clocksource tsc unstable (delta = -94834812 ns) [ 2.021328] ata4.00: configured for UDMA/33 [ 2.124096] ata2: SATA link down (SStatus 0 SControl 300) [ 2.124196] ata3: SATA link down (SStatus 0 SControl 300) [ 2.140105] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 2.281326] usb 1-2: configuration #1 chosen from 1 choice [ 2.460078] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.460835] ACPI Warning: \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940 [ 2.461026] ata1.00: _GTF unexpected object type 0x1 [ 2.504058] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 2.637238] usb 2-4: configuration #1 chosen from 1 choice [ 2.838958] ata1.00: ATA-8: TOSHIBA MK1646GSX, LB113J, max UDMA/100 [ 2.839035] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.840158] ata1.00: _GTF unexpected object type 0x1 [ 2.840375] ata1.00: configured for UDMA/100 [ 2.856206] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5 [ 2.856721] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.856848] sd 0:0:0:0: [sda] Write Protect is off [ 2.856917] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.856943] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.857159] sda: [ 2.857372] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.861255] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H AC01 PQ: 0 ANSI: 5 [ 2.876065] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.876156] Uniform CD-ROM driver Revision: 3.20 [ 2.876479] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.876674] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.880049] usb 6-1: new full speed USB device using uhci_hcd and address 2 [ 2.911367] sda1 sda2 sda3 sda4 [ 2.934210] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.934312] Freeing unused kernel memory: 652k freed [ 2.934630] Write protecting the kernel read-only data: 7508k [ 3.054172] usb 6-1: configuration #1 chosen from 1 choice [ 3.073560] [drm] Initialized drm 1.1.0 20060810 [ 3.088967] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.089052] nouveau 0000:01:00.0: setting latency timer to 64 [ 3.092681] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2) [ 3.093170] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 3.179340] nouveau 0000:01:00.0: ... appears to be valid [ 3.179410] nouveau 0000:01:00.0: BIT BIOS found [ 3.179477] nouveau 0000:01:00.0: Bios version 60.86.54.00 [ 3.179548] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 3.179630] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 3.179710] nouveau 0000:01:00.0: Raw DCB entry 0: 01010323 00000034 [ 3.179780] nouveau 0000:01:00.0: G80+ LVDS not initialized by driver; ignoring conf bits [ 3.179862] nouveau 0000:01:00.0: Raw DCB entry 1: 02001300 00000028 [ 3.179931] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010 [ 3.180013] nouveau 0000:01:00.0: Raw DCB entry 3: 010333f1 00c0c080 [ 3.180084] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000 [ 3.180161] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCDF0 [ 3.203180] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD167 [ 3.219177] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDDA8 [ 3.219252] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDE9A [ 3.220352] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE094 [ 3.220422] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE0F9 [ 5.204697] nouveau 0000:01:00.0: 0xE0F9: Condition still not met after 0ms, skiping following opcodes [ 5.204786] nouveau 0000:01:00.0: Table 0x0001 not found for 3/1, using first [ 5.204858] nouveau 0000:01:00.0: 0xB770: parsing output script 0 [ 5.204928] nouveau 0000:01:00.0: 0xB8E6: parsing output script 0 [ 5.204999] nouveau 0000:01:00.0: 0xAF3E: parsing output script 0 [ 5.336806] [TTM] TTM available graphics memory: 499 MiB [ 5.336881] [TTM] TTM available object memory: 499 MiB [ 5.375880] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 5.391453] nouveau 0000:01:00.0: nouveau_fifo_alloc: initialised FIFO 1 [ 5.392325] nouveau 0000:01:00.0: Detected a LVDS output [ 5.392404] nouveau 0000:01:00.0: Detected a DAC output [ 5.392477] nouveau 0000:01:00.0: Detected a TMDS output [ 5.392550] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 5.392623] nouveau 0000:01:00.0: Detected a LVDS connector [ 5.392970] nouveau 0000:01:00.0: Detected a VGA connector [ 5.393244] nouveau 0000:01:00.0: Detected a DVI-D connector [ 6.515454] allocated 1280x800 fb: 0x40230000, bo ffff88002f8f8e00 [ 6.517121] Console: switching to colour frame buffer device 160x50 [ 6.517146] [drm] LVDS-7: set mode 1280x800 e [ 6.518035] fb0: nouveaufb frame buffer device [ 6.518050] registered panic notifier [ 6.518067] [drm] Initialized nouveau 0.0.15 v2.6.31-rc3-155-g87f364e232f92ab34 for 0000:01:00.0 on minor 0 [ 6.518273] nouveau 0000:01:00.0: Table 0x0001 not found for 3/1, using first [ 6.518285] nouveau 0000:01:00.0: 0xB774: parsing output script 1 [ 6.518306] nouveau 0000:01:00.0: Table 0x0001 not found for 3/1, using first [ 6.518324] nouveau 0000:01:00.0: Table 0x0001 not found for 3/1, using first [ 6.518333] nouveau 0000:01:00.0: 0xB5D5: parsing clock script 0 [ 6.534480] nouveau 0000:01:00.0: Table 0x0001 not found for 3/1, using first [ 6.534494] nouveau 0000:01:00.0: 0xB733: parsing clock script 1 [ 6.607233] tg3.c:v3.99 (April 20, 2009) [ 6.607311] tg3 0000:08:00.0: enabling device (0000 -> 0002) [ 6.607332] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.607364] tg3 0000:08:00.0: setting latency timer to 64 [ 6.612149] tg3 0000:08:00.0: wake-up capability disabled by ACPI [ 6.612219] tg3 0000:08:00.0: PME# disabled [ 6.612762] usbcore: registered new interface driver hiddev [ 6.618937] Initializing USB Mass Storage driver... [ 6.622334] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input6 [ 6.622610] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0 [ 6.626708] scsi5 : SCSI emulation for USB Mass Storage devices [ 6.627007] usbcore: registered new interface driver usb-storage [ 6.627214] USB Mass Storage support registered. [ 6.627626] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1/input/input7 [ 6.627949] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1 [ 6.628190] usbcore: registered new interface driver usbhid [ 6.628576] usbhid: v2.6:USB HID core driver [ 6.634192] usb-storage: device found at 3 [ 6.634196] usb-storage: waiting for device to settle before scanning [ 6.648737] eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1e:68:17:d7:0e [ 6.648976] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 6.649186] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 6.649615] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 6.670988] ohci1394 0000:0a:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.734087] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 8.009249] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00054eb700] [ 8.252218] acpi device:04: registered as cooling_device2 [ 8.252958] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input8 [ 8.253267] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 8.365725] PM: Starting manual resume from disk [ 8.366454] PM: Resume from partition 8:2 [ 8.366456] PM: Checking hibernation image. [ 8.366625] PM: Resume from disk failed. [ 8.396350] EXT4-fs (sda4): barriers enabled [ 8.416311] kjournald2 starting: pid 1159, dev sda4:8, commit interval 5 seconds [ 8.416613] EXT4-fs (sda4): delayed allocation enabled [ 8.417023] EXT4-fs: file extents enabled [ 8.420788] EXT4-fs: mballoc enabled [ 8.421102] EXT4-fs (sda4): mounted filesystem with ordered data mode [ 11.632192] usb-storage: device scan complete [ 11.632694] scsi 5:0:0:0: Direct-Access StoreJet Transcend PQ: 0 ANSI: 2 CCS [ 11.633784] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 11.634788] sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 11.637518] sd 5:0:0:0: [sdb] Write Protect is off [ 11.637993] sd 5:0:0:0: [sdb] Mode Sense: 34 00 00 00 [ 11.637996] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 11.641140] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 11.641584] sdb: sdb1 [ 11.670015] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 11.670402] sd 5:0:0:0: [sdb] Attached SCSI disk [ 14.238114] udev: starting version 145 [ 15.092174] cfg80211: Calling CRDA to update world regulatory domain [ 15.273507] ricoh-mmc: Ricoh MMC Controller disabling driver [ 15.273770] ricoh-mmc: Copyright(c) Philip Langdale [ 15.275456] sdhci: Secure Digital Host Controller Interface driver [ 15.275779] sdhci: Copyright(c) Pierre Ossman [ 15.276482] ricoh-mmc: Ricoh MMC controller found at 0000:0a:09.2 [1180:0843] (rev 12) [ 15.276780] ricoh-mmc: Controller is now disabled. [ 15.280636] sdhci-pci 0000:0a:09.1: SDHCI controller found [1180:0822] (rev 22) [ 15.280945] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 15.282898] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 15.284285] Registered led device: mmc0:: [ 15.285685] mmc0: SDHCI controller on PCI [0000:0a:09.1] using DMA [ 15.337806] acer-wmi: Acer Laptop ACPI-WMI Extras [ 15.338570] acer-wmi: Brightness must be controlled by generic video driver [ 15.338838] Platform driver 'acer-wmi' needs updating - please use dev_pm_ops [ 15.365862] Linux video capture interface: v2.00 [ 15.381799] acerhdf: Acer Aspire One Fan driver, v.0.5.13 [ 15.382088] acerhdf: no Aspire One hardware found [ 15.424598] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 15.424942] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 15.425550] iwl3945 0000:06:00.0: enabling device (0000 -> 0002) [ 15.425896] iwl3945 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 15.426427] iwl3945 0000:06:00.0: setting latency timer to 64 [ 15.429323] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101) [ 15.500914] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 15.501203] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 15.501584] alloc irq_desc for 29 on node 0 [ 15.501586] alloc kstat_irqs on node 0 [ 15.501629] iwl3945 0000:06:00.0: irq 29 for MSI/MSI-X [ 15.502626] input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9 [ 15.503014] usbcore: registered new interface driver uvcvideo [ 15.503298] USB Video Class driver (v0.1.0) [ 15.718021] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 15.809235] cfg80211: World regulatory domain updated: [ 15.809505] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.809836] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.810509] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.811169] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.811830] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.812482] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.887855] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f [ 15.925314] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10 [ 15.940057] usb 7-1: new full speed USB device using uhci_hcd and address 2 [ 16.110221] usb 7-1: configuration #1 chosen from 1 choice [ 16.155705] alloc irq_desc for 22 on node 0 [ 16.155709] alloc kstat_irqs on node 0 [ 16.155716] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.156040] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.162109] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 16.162529] usbcore: registered new interface driver btusb [ 16.328442] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 16.549763] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000 [ 16.584211] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12 [ 16.667023] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k [ 16.959499] EXT4-fs (sda4): internal journal on sda4:8 [ 18.180074] type=1505 audit(1249677124.807:2): operation="profile_load" pid=1961 name=/usr/sbin/mysqld-akonadi [ 18.182302] type=1505 audit(1249677124.811:3): operation="profile_load" pid=1962 name=/usr/sbin/tcpdump [ 18.184931] type=1505 audit(1249677124.811:4): operation="profile_load" pid=1963 name=/usr/lib/cups/backend/cups-pdf [ 18.185809] type=1505 audit(1249677124.815:5): operation="profile_load" pid=1963 name=/usr/sbin/cupsd [ 18.188825] type=1505 audit(1249677124.815:6): operation="profile_load" pid=1964 name=/sbin/dhclient3 [ 18.189511] type=1505 audit(1249677124.819:7): operation="profile_load" pid=1964 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 18.189873] type=1505 audit(1249677124.819:8): operation="profile_load" pid=1964 name=/usr/lib/connman/scripts/dhclient-script [ 21.761129] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.761132] Bluetooth: BNEP filters: protocol multicast [ 21.808370] Bridge firewalling registered [ 23.048688] lp: driver loaded but no devices found [ 23.083484] ppdev: user-space parallel port driver [ 23.846103] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 23.861697] nouveau 0000:01:00.0: nouveau_fifo_alloc: initialised FIFO 2