[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.36-rc3-next-20100903 (root@aapi205) (gcc version 4.4.5 20100824 (prerelease) (Debian 4.4.4-11) ) #1 SMP PREEMPT Fri Sep 3 10:41:41 CEST 2010 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.36-rc3-next-20100903 root=UUID=cdb6c166-b027-4a29-87fa-93d604dc5e53 ro quiet vga=791 all_generic_ata [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee2000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CDFFF write-protect [ 0.000000] CE000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 130000000 mask FF0000000 uncachable [ 0.000000] 5 base 0CFF00000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfee0000 (usable) [ 0.000000] modified: 00000000cfee0000 - 00000000cfee2000 (ACPI NVS) [ 0.000000] modified: 00000000cfee2000 - 00000000cfef0000 (ACPI data) [ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f5880] f5880 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfee0000 page 4k [ 0.000000] kernel direct mapping tables up to cfee0000 @ 16000-1c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 1a000-20000 [ 0.000000] RAMDISK: 375bc000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f7270 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfee2040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee2180 04CD2 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfee0000 00040 [ 0.000000] ACPI: EUDS 00000000cfee7580 00470 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: HPET 00000000cfee74c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfee7540 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfee6ec0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000cfee8320 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000100000000 - 000000010000efff] [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880100200000-ffff880103bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfee0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3927 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [1b000 - 1b7ff] [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfee0000 - 00000000cfee2000 [ 0.000000] PM: Registered nosave memory: 00000000cfee2000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000 [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001a00000 s75200 r8192 d23104 u524288 [ 0.000000] pcpu-alloc: s75200 r8192 d23104 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031151 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.36-rc3-next-20100903 root=UUID=cdb6c166-b027-4a29-87fa-93d604dc5e53 ro quiet vga=791 all_generic_ata [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Subtract (56 early reservations) [ 0.000000] #1 [0001000000 - 000180def0] TEXT DATA BSS [ 0.000000] #2 [00375bc000 - 0037ff0000] RAMDISK [ 0.000000] #3 [000180e000 - 000180e0f6] BRK [ 0.000000] #4 [00000f5890 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f5880 - 00000f5890] MP-table mpf [ 0.000000] #6 [000009f800 - 00000f0d00] BIOS reserved [ 0.000000] #7 [00000f0ecc - 00000f5880] BIOS reserved [ 0.000000] #8 [00000f0d00 - 00000f0ecc] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 000001a000] PGTABLE [ 0.000000] #12 [000001a000 - 000001b000] PGTABLE [ 0.000000] #13 [0100000000 - 010000f000] NODE_DATA [ 0.000000] #14 [000180e100 - 000180f100] BOOTMEM [ 0.000000] #15 [010000f000 - 010000f300] BOOTMEM [ 0.000000] #16 [0100010000 - 0100011000] BOOTMEM [ 0.000000] #17 [0100011000 - 0100012000] BOOTMEM [ 0.000000] #18 [0100200000 - 0103c00000] MEMMAP 0 [ 0.000000] #19 [000180f100 - 0001827100] BOOTMEM [ 0.000000] #20 [0001827100 - 000183f100] BOOTMEM [ 0.000000] #21 [000183f100 - 0001857100] BOOTMEM [ 0.000000] #22 [0001858000 - 0001859000] BOOTMEM [ 0.000000] #23 [000180df00 - 000180df41] BOOTMEM [ 0.000000] #24 [000180df80 - 000180dfc3] BOOTMEM [ 0.000000] #25 [0001857100 - 0001857368] BOOTMEM [ 0.000000] #26 [0001857380 - 00018573e8] BOOTMEM [ 0.000000] #27 [0001857400 - 0001857468] BOOTMEM [ 0.000000] #28 [0001857480 - 00018574e8] BOOTMEM [ 0.000000] #29 [0001857500 - 0001857568] BOOTMEM [ 0.000000] #30 [0001857580 - 00018575e8] BOOTMEM [ 0.000000] #31 [0001857600 - 0001857668] BOOTMEM [ 0.000000] #32 [0001857680 - 00018576e8] BOOTMEM [ 0.000000] #33 [0001857700 - 0001857768] BOOTMEM [ 0.000000] #34 [0001857780 - 00018577e8] BOOTMEM [ 0.000000] #35 [0001857800 - 0001857868] BOOTMEM [ 0.000000] #36 [0001857880 - 00018578a0] BOOTMEM [ 0.000000] #37 [00018578c0 - 00018578e0] BOOTMEM [ 0.000000] #38 [0001857900 - 000185797d] BOOTMEM [ 0.000000] #39 [0001857980 - 00018579fd] BOOTMEM [ 0.000000] #40 [0001a00000 - 0001a1a000] BOOTMEM [ 0.000000] #41 [0001a80000 - 0001a9a000] BOOTMEM [ 0.000000] #42 [0001b00000 - 0001b1a000] BOOTMEM [ 0.000000] #43 [0001b80000 - 0001b9a000] BOOTMEM [ 0.000000] #44 [0001857a00 - 0001857a08] BOOTMEM [ 0.000000] #45 [0001857a40 - 0001857a48] BOOTMEM [ 0.000000] #46 [0001857a80 - 0001857a90] BOOTMEM [ 0.000000] #47 [0001857ac0 - 0001857ae0] BOOTMEM [ 0.000000] #48 [0001857b00 - 0001857c30] BOOTMEM [ 0.000000] #49 [0001857c40 - 0001857c90] BOOTMEM [ 0.000000] #50 [0001857cc0 - 0001857d10] BOOTMEM [ 0.000000] #51 [0001859000 - 0001861000] BOOTMEM [ 0.000000] #52 [0001b9a000 - 0005b9a000] BOOTMEM [ 0.000000] #53 [0001861000 - 0001881000] BOOTMEM [ 0.000000] #54 [0001881000 - 00018c1000] BOOTMEM [ 0.000000] #55 [000001b800 - 0000023800] BOOTMEM [ 0.000000] Memory: 4047792k/4980736k available (3162k kernel code, 788036k absent, 144908k reserved, 3743k data, 540k init) [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:712 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2333.167 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.33 BogoMIPS (lpj=9332668) [ 0.004009] pid_max: default: 32768 minimum: 301 [ 0.004062] Security Framework initialized [ 0.004071] SELinux: Disabled at boot. [ 0.004454] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006023] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008656] Mount-cache hash table entries: 256 [ 0.008814] Initializing cgroup subsys ns [ 0.008818] Initializing cgroup subsys cpuacct [ 0.008822] Initializing cgroup subsys devices [ 0.008825] Initializing cgroup subsys blkio [ 0.008867] CPU: Physical Processor ID: 0 [ 0.008869] CPU: Processor Core ID: 0 [ 0.008871] mce: CPU supports 6 MCE banks [ 0.008878] CPU0: Thermal monitoring enabled (TM2) [ 0.008882] using mwait in idle threads. [ 0.008883] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.008891] ... version: 2 [ 0.008892] ... bit width: 40 [ 0.008894] ... generic registers: 2 [ 0.008895] ... value mask: 000000ffffffffff [ 0.008897] ... max period: 000000007fffffff [ 0.008898] ... fixed-purpose events: 3 [ 0.008900] ... event mask: 0000000700000003 [ 0.009656] ACPI: Core revision 20100702 [ 0.016063] Setting APIC routing to flat [ 0.016369] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.056068] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping 07 [ 0.072022] Booting Node 0, Processors #1 #2 #3 Ok. [ 0.356010] Brought up 4 CPUs [ 0.356014] Total of 4 processors activated (18664.61 BogoMIPS). [ 0.357325] devtmpfs: initialized [ 0.362257] regulator: core version 0.5 [ 0.362257] regulator: dummy: [ 0.362257] NET: Registered protocol family 16 [ 0.364065] ACPI: bus type pci registered [ 0.364077] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.364077] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.371258] PCI: Using configuration type 1 for base access [ 0.372199] bio: create slab at 0 [ 0.376294] ACPI: EC: Look up EC in DSDT [ 0.381995] ACPI: SSDT 00000000cfee7a40 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.382249] ACPI: Dynamic OEM Table Load: [ 0.382252] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.382500] ACPI: SSDT 00000000cfee7f00 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.382741] ACPI: Dynamic OEM Table Load: [ 0.382744] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.382979] ACPI: SSDT 00000000cfee8060 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.383220] ACPI: Dynamic OEM Table Load: [ 0.383223] ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.383459] ACPI: SSDT 00000000cfee81c0 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.383701] ACPI: Dynamic OEM Table Load: [ 0.383704] ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.383737] ACPI: Interpreter enabled [ 0.383740] ACPI: (supports S0 S3 S4 S5) [ 0.383762] ACPI: Using IOAPIC for interrupt routing [ 0.392194] ACPI: No dock devices found. [ 0.392198] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.392287] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.392324] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.392324] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.392324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.392324] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.392324] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff] [ 0.392324] pci_bus 0000:00: scanning bus [ 0.392324] pci 0000:00:00.0: found [8086:2e20] class 000600 header type 00 [ 0.392324] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.392324] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x166 [ 0.392324] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.392324] pci 0000:00:01.0: found [8086:2e21] class 000604 header type 01 [ 0.392324] pci 0000:00:01.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.392324] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x166 [ 0.392324] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.392324] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.392324] pci 0000:00:01.0: PME# disabled [ 0.392324] pci 0000:00:1a.0: found [8086:3a37] class 000c03 header type 00 [ 0.392324] pci 0000:00:1a.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.392341] pci 0000:00:1a.0: reg 20: [io 0xe000-0xe01f] [ 0.392359] pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x166 [ 0.392362] pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.392389] pci 0000:00:1a.1: found [8086:3a38] class 000c03 header type 00 [ 0.392395] pci 0000:00:1a.1: calling quirk_mmio_always_on+0x0/0x17 [ 0.392431] pci 0000:00:1a.1: reg 20: [io 0xe100-0xe11f] [ 0.392449] pci 0000:00:1a.1: calling quirk_resource_alignment+0x0/0x166 [ 0.392452] pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.392478] pci 0000:00:1a.2: found [8086:3a39] class 000c03 header type 00 [ 0.392485] pci 0000:00:1a.2: calling quirk_mmio_always_on+0x0/0x17 [ 0.392520] pci 0000:00:1a.2: reg 20: [io 0xe500-0xe51f] [ 0.392538] pci 0000:00:1a.2: calling quirk_resource_alignment+0x0/0x166 [ 0.392541] pci 0000:00:1a.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.392572] pci 0000:00:1a.7: found [8086:3a3c] class 000c03 header type 00 [ 0.392579] pci 0000:00:1a.7: calling quirk_mmio_always_on+0x0/0x17 [ 0.392590] pci 0000:00:1a.7: reg 10: [mem 0xeb205000-0xeb2053ff] [ 0.392638] pci 0000:00:1a.7: calling quirk_resource_alignment+0x0/0x166 [ 0.392641] pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.392672] pci 0000:00:1b.0: found [8086:3a3e] class 000403 header type 00 [ 0.392676] pci 0000:00:1b.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.392690] pci 0000:00:1b.0: reg 10: [mem 0xeb200000-0xeb203fff 64bit] [ 0.392724] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x166 [ 0.392727] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.392745] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.392749] pci 0000:00:1b.0: PME# disabled [ 0.392768] pci 0000:00:1c.0: found [8086:3a40] class 000604 header type 01 [ 0.392772] pci 0000:00:1c.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.392803] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x166 [ 0.392806] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.392827] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.392831] pci 0000:00:1c.0: PME# disabled [ 0.392852] pci 0000:00:1c.3: found [8086:3a46] class 000604 header type 01 [ 0.392856] pci 0000:00:1c.3: calling quirk_mmio_always_on+0x0/0x17 [ 0.392887] pci 0000:00:1c.3: calling quirk_resource_alignment+0x0/0x166 [ 0.392890] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.392911] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.392915] pci 0000:00:1c.3: PME# disabled [ 0.392935] pci 0000:00:1c.4: found [8086:3a48] class 000604 header type 01 [ 0.392938] pci 0000:00:1c.4: calling quirk_mmio_always_on+0x0/0x17 [ 0.392970] pci 0000:00:1c.4: calling quirk_resource_alignment+0x0/0x166 [ 0.392973] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.392994] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.392997] pci 0000:00:1c.4: PME# disabled [ 0.393021] pci 0000:00:1d.0: found [8086:3a34] class 000c03 header type 00 [ 0.393027] pci 0000:00:1d.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.393063] pci 0000:00:1d.0: reg 20: [io 0xe200-0xe21f] [ 0.393081] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x166 [ 0.393084] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.393110] pci 0000:00:1d.1: found [8086:3a35] class 000c03 header type 00 [ 0.393117] pci 0000:00:1d.1: calling quirk_mmio_always_on+0x0/0x17 [ 0.393153] pci 0000:00:1d.1: reg 20: [io 0xe300-0xe31f] [ 0.393170] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x166 [ 0.393174] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.393200] pci 0000:00:1d.2: found [8086:3a36] class 000c03 header type 00 [ 0.393207] pci 0000:00:1d.2: calling quirk_mmio_always_on+0x0/0x17 [ 0.393242] pci 0000:00:1d.2: reg 20: [io 0xe400-0xe41f] [ 0.393260] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x166 [ 0.393263] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.393294] pci 0000:00:1d.7: found [8086:3a3a] class 000c03 header type 00 [ 0.393301] pci 0000:00:1d.7: calling quirk_mmio_always_on+0x0/0x17 [ 0.393312] pci 0000:00:1d.7: reg 10: [mem 0xeb204000-0xeb2043ff] [ 0.393360] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x166 [ 0.393363] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.393391] pci 0000:00:1e.0: found [8086:244e] class 000604 header type 01 [ 0.393397] pci 0000:00:1e.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.393422] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x166 [ 0.393425] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.393452] pci 0000:00:1f.0: found [8086:3a18] class 000601 header type 00 [ 0.393460] pci 0000:00:1f.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.393525] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x166 [ 0.393528] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.393561] pci 0000:00:1f.2: found [8086:3a20] class 000101 header type 00 [ 0.393569] pci 0000:00:1f.2: calling quirk_mmio_always_on+0x0/0x17 [ 0.393578] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.393586] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.393593] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.393600] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.393608] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f] [ 0.393615] pci 0000:00:1f.2: reg 24: [io 0xf100-0xf10f] [ 0.393627] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x166 [ 0.393630] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.393656] pci 0000:00:1f.3: found [8086:3a30] class 000c05 header type 00 [ 0.393660] pci 0000:00:1f.3: calling quirk_mmio_always_on+0x0/0x17 [ 0.393673] pci 0000:00:1f.3: reg 10: [mem 0xeb206000-0xeb2060ff 64bit] [ 0.393693] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.393709] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x166 [ 0.393712] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.393730] pci 0000:00:1f.5: found [8086:3a26] class 000101 header type 00 [ 0.393738] pci 0000:00:1f.5: calling quirk_mmio_always_on+0x0/0x17 [ 0.393747] pci 0000:00:1f.5: reg 10: [io 0xe700-0xe707] [ 0.393754] pci 0000:00:1f.5: reg 14: [io 0xe800-0xe803] [ 0.393762] pci 0000:00:1f.5: reg 18: [io 0xe900-0xe907] [ 0.393769] pci 0000:00:1f.5: reg 1c: [io 0xea00-0xea03] [ 0.393777] pci 0000:00:1f.5: reg 20: [io 0xeb00-0xeb0f] [ 0.393784] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f] [ 0.393795] pci 0000:00:1f.5: calling quirk_resource_alignment+0x0/0x166 [ 0.393798] pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.393820] pci_bus 0000:00: fixups for bus [ 0.393824] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0 [ 0.393846] pci_bus 0000:01: scanning bus [ 0.393859] pci 0000:01:00.0: found [10de:0641] class 000300 header type 00 [ 0.393863] pci 0000:01:00.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.393872] pci 0000:01:00.0: reg 10: [mem 0xe6000000-0xe6ffffff] [ 0.393883] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.393893] pci 0000:01:00.0: reg 1c: [mem 0xe4000000-0xe5ffffff 64bit] [ 0.393901] pci 0000:01:00.0: reg 24: [io 0xa000-0xa07f] [ 0.393908] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.393913] pci 0000:01:00.0: calling quirk_resource_alignment+0x0/0x166 [ 0.393954] pci_bus 0000:01: fixups for bus [ 0.393956] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.393959] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.393962] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff] [ 0.393966] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.393968] pci_bus 0000:01: bus scan returning with max=01 [ 0.393972] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 0 [ 0.394005] pci_bus 0000:02: scanning bus [ 0.394008] pci_bus 0000:02: fixups for bus [ 0.394010] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.394014] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.394018] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.394023] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.394026] pci_bus 0000:02: bus scan returning with max=02 [ 0.394030] pci 0000:00:1c.3: scanning [bus 03-03] behind bridge, pass 0 [ 0.394063] pci_bus 0000:03: scanning bus [ 0.394084] pci 0000:03:00.0: found [197b:2363] class 000101 header type 00 [ 0.394090] pci 0000:03:00.0: calling quirk_jmicron_ata+0x0/0x100 [ 0.394103] pci 0000:03:00.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.394176] pci 0000:03:00.0: reg 24: [mem 0xeb100000-0xeb101fff] [ 0.394194] pci 0000:03:00.0: calling quirk_resource_alignment+0x0/0x166 [ 0.394221] pci 0000:03:00.0: PME# supported from D3hot [ 0.394226] pci 0000:03:00.0: PME# disabled [ 0.394255] pci 0000:03:00.1: found [197b:2363] class 000101 header type 00 [ 0.394265] pci 0000:03:00.1: calling quirk_jmicron_ata+0x0/0x100 [ 0.394268] pci 0000:03:00.1: calling quirk_mmio_always_on+0x0/0x17 [ 0.394285] pci 0000:03:00.1: reg 10: [io 0xb000-0xb007] [ 0.394298] pci 0000:03:00.1: reg 14: [io 0xb100-0xb103] [ 0.394311] pci 0000:03:00.1: reg 18: [io 0xb200-0xb207] [ 0.394325] pci 0000:03:00.1: reg 1c: [io 0xb300-0xb303] [ 0.394338] pci 0000:03:00.1: reg 20: [io 0xb400-0xb40f] [ 0.394368] pci 0000:03:00.1: calling quirk_resource_alignment+0x0/0x166 [ 0.394408] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.394421] pci_bus 0000:03: fixups for bus [ 0.394423] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.394426] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff] [ 0.394430] pci 0000:00:1c.3: bridge window [mem 0xeb100000-0xeb1fffff] [ 0.394436] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.394438] pci_bus 0000:03: bus scan returning with max=03 [ 0.394442] pci 0000:00:1c.4: scanning [bus 04-04] behind bridge, pass 0 [ 0.394477] pci_bus 0000:04: scanning bus [ 0.394497] pci 0000:04:00.0: found [10ec:8168] class 000200 header type 00 [ 0.394501] pci 0000:04:00.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.394516] pci 0000:04:00.0: reg 10: [io 0xc000-0xc0ff] [ 0.396024] pci 0000:04:00.0: reg 18: [mem 0xeb010000-0xeb010fff 64bit pref] [ 0.396042] pci 0000:04:00.0: reg 20: [mem 0xeb000000-0xeb00ffff 64bit pref] [ 0.396054] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.396064] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x166 [ 0.396100] pci 0000:04:00.0: supports D1 D2 [ 0.396102] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.396107] pci 0000:04:00.0: PME# disabled [ 0.404016] pci_bus 0000:04: fixups for bus [ 0.404019] pci 0000:00:1c.4: PCI bridge to [bus 04-04] [ 0.404023] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.404027] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe8ffffff] [ 0.404033] pci 0000:00:1c.4: bridge window [mem 0xeb000000-0xeb0fffff 64bit pref] [ 0.404036] pci_bus 0000:04: bus scan returning with max=04 [ 0.404041] pci 0000:00:1e.0: scanning [bus 05-05] behind bridge, pass 0 [ 0.404061] pci_bus 0000:05: scanning bus [ 0.404075] pci 0000:05:00.0: found [10ec:8169] class 000200 header type 00 [ 0.404084] pci 0000:05:00.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.404097] pci 0000:05:00.0: reg 10: [io 0xd000-0xd0ff] [ 0.404118] pci 0000:05:00.0: reg 14: [mem 0xea005000-0xea0050ff] [ 0.404160] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.404166] pci 0000:05:00.0: calling quirk_resource_alignment+0x0/0x166 [ 0.404187] pci 0000:05:00.0: supports D1 D2 [ 0.404189] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.404193] pci 0000:05:00.0: PME# disabled [ 0.404217] pci 0000:05:07.0: found [104c:8024] class 000c00 header type 00 [ 0.404224] pci 0000:05:07.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.404237] pci 0000:05:07.0: reg 10: [mem 0xea004000-0xea0047ff] [ 0.404247] pci 0000:05:07.0: reg 14: [mem 0xea000000-0xea003fff] [ 0.404290] pci 0000:05:07.0: calling quirk_resource_alignment+0x0/0x166 [ 0.404306] pci 0000:05:07.0: supports D1 D2 [ 0.404308] pci 0000:05:07.0: PME# supported from D0 D1 D2 D3hot [ 0.404312] pci 0000:05:07.0: PME# disabled [ 0.404346] pci_bus 0000:05: fixups for bus [ 0.404348] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.404352] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.404355] pci 0000:00:1e.0: bridge window [mem 0xe9000000-0xeaffffff] [ 0.404361] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.404364] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.404366] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.404369] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.404371] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.404374] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode) [ 0.404376] pci_bus 0000:05: bus scan returning with max=05 [ 0.404380] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1 [ 0.404385] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 1 [ 0.404390] pci 0000:00:1c.3: scanning [bus 03-03] behind bridge, pass 1 [ 0.404396] pci 0000:00:1c.4: scanning [bus 04-04] behind bridge, pass 1 [ 0.404401] pci 0000:00:1e.0: scanning [bus 05-05] behind bridge, pass 1 [ 0.404405] pci_bus 0000:00: bus scan returning with max=05 [ 0.404409] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.404573] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.404624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.404682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.404730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.420070] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.420135] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.420198] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.420260] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.420323] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.420385] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.420447] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.420510] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.420546] HEST: Table is not found! [ 0.420546] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.420546] vgaarb: loaded [ 0.420546] usbcore: registered new interface driver usbfs [ 0.420546] usbcore: registered new interface driver hub [ 0.420546] usbcore: registered new device driver usb [ 0.420546] PCI: Using ACPI for IRQ routing [ 0.420546] PCI: pci_cache_line_size set to 64 bytes [ 0.420546] pci 0000:00:1a.0: BAR 4: reserving [io 0xe000-0xe01f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1a.1: BAR 4: reserving [io 0xe100-0xe11f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1a.2: BAR 4: reserving [io 0xe500-0xe51f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1a.7: BAR 0: reserving [mem 0xeb205000-0xeb2053ff flags 0x40200] (d=0, p=0) [ 0.420546] pci 0000:00:1b.0: BAR 0: reserving [mem 0xeb200000-0xeb203fff flags 0x140204] (d=0, p=0) [ 0.420546] pci 0000:00:1d.0: BAR 4: reserving [io 0xe200-0xe21f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1d.1: BAR 4: reserving [io 0xe300-0xe31f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1d.2: BAR 4: reserving [io 0xe400-0xe41f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1d.7: BAR 0: reserving [mem 0xeb204000-0xeb2043ff flags 0x40200] (d=0, p=0) [ 0.420546] pci 0000:00:1f.2: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) [ 0.420546] pci 0000:00:1f.2: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) [ 0.420546] pci 0000:00:1f.2: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) [ 0.420546] pci 0000:00:1f.2: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) [ 0.420546] pci 0000:00:1f.2: BAR 4: reserving [io 0xf000-0xf00f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1f.2: BAR 5: reserving [io 0xf100-0xf10f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1f.3: BAR 0: reserving [mem 0xeb206000-0xeb2060ff flags 0x140204] (d=0, p=0) [ 0.420546] pci 0000:00:1f.3: BAR 4: reserving [io 0x0500-0x051f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1f.5: BAR 0: reserving [io 0xe700-0xe707 flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1f.5: BAR 1: reserving [io 0xe800-0xe803 flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1f.5: BAR 2: reserving [io 0xe900-0xe907 flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1f.5: BAR 3: reserving [io 0xea00-0xea03 flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1f.5: BAR 4: reserving [io 0xeb00-0xeb0f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:00:1f.5: BAR 5: reserving [io 0xec00-0xec0f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:01:00.0: BAR 0: reserving [mem 0xe6000000-0xe6ffffff flags 0x40200] (d=0, p=0) [ 0.420546] pci 0000:01:00.0: BAR 1: reserving [mem 0xd0000000-0xdfffffff flags 0x14220c] (d=0, p=0) [ 0.420546] pci 0000:01:00.0: BAR 3: reserving [mem 0xe4000000-0xe5ffffff flags 0x140204] (d=0, p=0) [ 0.420546] pci 0000:01:00.0: BAR 5: reserving [io 0xa000-0xa07f flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:03:00.0: BAR 5: reserving [mem 0xeb100000-0xeb101fff flags 0x40200] (d=0, p=0) [ 0.420546] pci 0000:04:00.0: BAR 0: reserving [io 0xc000-0xc0ff flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:04:00.0: BAR 2: reserving [mem 0xeb010000-0xeb010fff flags 0x14220c] (d=0, p=0) [ 0.420546] pci 0000:04:00.0: BAR 4: reserving [mem 0xeb000000-0xeb00ffff flags 0x14220c] (d=0, p=0) [ 0.420546] pci 0000:05:00.0: BAR 0: reserving [io 0xd000-0xd0ff flags 0x40101] (d=0, p=0) [ 0.420546] pci 0000:05:00.0: BAR 1: reserving [mem 0xea005000-0xea0050ff flags 0x40200] (d=0, p=0) [ 0.420546] pci 0000:05:07.0: BAR 0: reserving [mem 0xea004000-0xea0047ff flags 0x40200] (d=0, p=0) [ 0.420546] pci 0000:05:07.0: BAR 1: reserving [mem 0xea000000-0xea003fff flags 0x40200] (d=0, p=0) [ 0.420546] pci 0000:03:00.1: BAR 0: reserving [io 0xb000-0xb007 flags 0x40101] (d=1, p=1) [ 0.420546] pci 0000:03:00.1: BAR 1: reserving [io 0xb100-0xb103 flags 0x40101] (d=1, p=1) [ 0.420546] pci 0000:03:00.1: BAR 2: reserving [io 0xb200-0xb207 flags 0x40101] (d=1, p=1) [ 0.420546] pci 0000:03:00.1: BAR 3: reserving [io 0xb300-0xb303 flags 0x40101] (d=1, p=1) [ 0.420546] pci 0000:03:00.1: BAR 4: reserving [io 0xb400-0xb40f flags 0x40101] (d=1, p=1) [ 0.420546] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.420546] reserve RAM buffer: 00000000cfee0000 - 00000000cfffffff [ 0.420546] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.420546] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.420546] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.436079] Switching to clocksource tsc [ 0.446844] pnp: PnP ACPI init [ 0.446867] ACPI: bus type pnp registered [ 0.450198] pnp: PnP ACPI: found 16 devices [ 0.450200] ACPI: ACPI bus type pnp unregistered [ 0.450212] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.450215] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.450218] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.450221] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.450224] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.450227] system 00:01: [io 0x04c0-0x04ff] could not be reserved [ 0.450235] system 00:0c: [io 0x0400-0x04bf] has been reserved [ 0.450242] system 00:0d: [mem 0xe0000000-0xe3ffffff] has been reserved [ 0.450248] system 00:0e: [mem 0x000ce000-0x000cffff] has been reserved [ 0.450252] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.450255] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.450258] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.450261] system 00:0e: [mem 0xcfee0000-0xcfefffff] could not be reserved [ 0.450264] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.450267] system 00:0e: [mem 0x00100000-0xcfedffff] could not be reserved [ 0.450270] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.450273] system 00:0e: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.450275] system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.450278] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.450281] system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.450284] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved [ 0.450287] system 00:0e: [mem 0x000e0000-0x000effff] has been reserved [ 0.460404] pci 0000:00:1c.0: BAR 14: assigned [mem 0xeb300000-0xeb4fffff] [ 0.460408] pci 0000:00:1c.0: BAR 15: assigned [mem 0xeb500000-0xeb6fffff 64bit pref] [ 0.460412] pci 0000:00:1c.3: BAR 15: assigned [mem 0xeb700000-0xeb8fffff 64bit pref] [ 0.460415] pci 0000:00:1e.0: BAR 15: assigned [mem 0xcff00000-0xcfffffff pref] [ 0.460418] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.460422] pci 0000:01:00.0: BAR 6: assigned [mem 0xe7000000-0xe707ffff pref] [ 0.460424] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.460427] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.460431] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe7ffffff] [ 0.460434] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.460438] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.460441] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.460446] pci 0000:00:1c.0: bridge window [mem 0xeb300000-0xeb4fffff] [ 0.460449] pci 0000:00:1c.0: bridge window [mem 0xeb500000-0xeb6fffff 64bit pref] [ 0.460455] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.460458] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff] [ 0.460463] pci 0000:00:1c.3: bridge window [mem 0xeb100000-0xeb1fffff] [ 0.460466] pci 0000:00:1c.3: bridge window [mem 0xeb700000-0xeb8fffff 64bit pref] [ 0.460473] pci 0000:04:00.0: BAR 6: assigned [mem 0xeb020000-0xeb02ffff pref] [ 0.460475] pci 0000:00:1c.4: PCI bridge to [bus 04-04] [ 0.460478] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.460483] pci 0000:00:1c.4: bridge window [mem 0xe8000000-0xe8ffffff] [ 0.460487] pci 0000:00:1c.4: bridge window [mem 0xeb000000-0xeb0fffff 64bit pref] [ 0.460493] pci 0000:05:00.0: BAR 6: assigned [mem 0xcff00000-0xcff0ffff pref] [ 0.460495] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.460498] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.460503] pci 0000:00:1e.0: bridge window [mem 0xe9000000-0xeaffffff] [ 0.460506] pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xcfffffff pref] [ 0.460518] alloc irq_desc for 16 on node -1 [ 0.460521] alloc kstat_irqs on node -1 [ 0.460527] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.460531] pci 0000:00:01.0: setting latency timer to 64 [ 0.460539] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.460543] pci 0000:00:1c.0: setting latency timer to 64 [ 0.460555] alloc irq_desc for 19 on node -1 [ 0.460557] alloc kstat_irqs on node -1 [ 0.460561] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.460565] pci 0000:00:1c.3: setting latency timer to 64 [ 0.460573] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.460577] pci 0000:00:1c.4: setting latency timer to 64 [ 0.460583] pci 0000:00:1e.0: setting latency timer to 64 [ 0.460586] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.460589] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.460591] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.460593] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.460595] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.460598] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.460600] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe7ffffff] [ 0.460602] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.460605] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.460607] pci_bus 0000:02: resource 1 [mem 0xeb300000-0xeb4fffff] [ 0.460609] pci_bus 0000:02: resource 2 [mem 0xeb500000-0xeb6fffff 64bit pref] [ 0.460612] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.460614] pci_bus 0000:03: resource 1 [mem 0xeb100000-0xeb1fffff] [ 0.460616] pci_bus 0000:03: resource 2 [mem 0xeb700000-0xeb8fffff 64bit pref] [ 0.460618] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.460621] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe8ffffff] [ 0.460623] pci_bus 0000:04: resource 2 [mem 0xeb000000-0xeb0fffff 64bit pref] [ 0.460625] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.460627] pci_bus 0000:05: resource 1 [mem 0xe9000000-0xeaffffff] [ 0.460630] pci_bus 0000:05: resource 2 [mem 0xcff00000-0xcfffffff pref] [ 0.460632] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.460634] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.460636] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.460638] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.460640] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff] [ 0.460752] NET: Registered protocol family 2 [ 0.460946] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.462191] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.465050] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.465397] TCP: Hash tables configured (established 524288 bind 65536) [ 0.465400] TCP reno registered [ 0.465411] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.465443] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.465654] NET: Registered protocol family 1 [ 0.465678] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.465683] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465687] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465690] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xad [ 0.465697] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.465700] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465703] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465706] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xad [ 0.465711] pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.465714] pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465717] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465722] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f10 [ 0.465723] pci 0000:00:1a.0: Performing full reset [ 0.465736] pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xad [ 0.465741] pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x145 [ 0.465744] pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465747] pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465751] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.465753] pci 0000:00:1a.1: Performing full reset [ 0.465765] pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xad [ 0.465770] pci 0000:00:1a.2: calling quirk_e100_interrupt+0x0/0x145 [ 0.465773] pci 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465776] pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465780] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.465782] pci 0000:00:1a.2: Performing full reset [ 0.465794] pci 0000:00:1a.2: calling pci_fixup_video+0x0/0xad [ 0.465799] pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x145 [ 0.465802] pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465805] pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465832] pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xad [ 0.465837] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.465841] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465844] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465847] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xad [ 0.465852] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.465855] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465858] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465861] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xad [ 0.465866] pci 0000:00:1c.3: calling quirk_e100_interrupt+0x0/0x145 [ 0.465869] pci 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465872] pci 0000:00:1c.3: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465875] pci 0000:00:1c.3: calling pci_fixup_video+0x0/0xad [ 0.465880] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x145 [ 0.465883] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465886] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465889] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xad [ 0.465893] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.465897] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465900] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465904] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x043a [ 0.465906] pci 0000:00:1d.0: Performing full reset [ 0.465917] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xad [ 0.465922] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x145 [ 0.465925] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465928] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465933] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.465934] pci 0000:00:1d.1: Performing full reset [ 0.465946] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xad [ 0.465951] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x145 [ 0.465954] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465957] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.465961] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.465963] pci 0000:00:1d.2: Performing full reset [ 0.465975] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xad [ 0.465980] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x145 [ 0.465983] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x22 [ 0.465986] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466017] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xad [ 0.466022] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.466026] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466029] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466032] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xad [ 0.466037] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x145 [ 0.466040] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466043] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466046] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xad [ 0.466051] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x145 [ 0.466054] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466057] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466060] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xad [ 0.466065] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x145 [ 0.466068] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466071] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466074] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xad [ 0.466079] pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x145 [ 0.466082] pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466085] pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466088] pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xad [ 0.466093] pci 0000:01:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0xd [ 0.466105] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466108] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466111] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xad [ 0.466114] pci 0000:01:00.0: Boot video device [ 0.466119] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466122] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466125] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xad [ 0.466131] pci 0000:03:00.1: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466134] pci 0000:03:00.1: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466137] pci 0000:03:00.1: calling pci_fixup_video+0x0/0xad [ 0.466142] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466145] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466148] pci 0000:04:00.0: calling pci_fixup_video+0x0/0xad [ 0.466154] pci 0000:05:00.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466157] pci 0000:05:00.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466160] pci 0000:05:00.0: calling pci_fixup_video+0x0/0xad [ 0.466165] pci 0000:05:07.0: calling quirk_cardbus_legacy+0x0/0x22 [ 0.466168] pci 0000:05:07.0: calling quirk_usb_early_handoff+0x0/0x4e9 [ 0.466171] pci 0000:05:07.0: calling pci_fixup_video+0x0/0xad [ 0.466174] PCI: CLS 32 bytes, default 64 [ 0.466230] Trying to unpack rootfs image as initramfs... [ 0.699732] Freeing initrd memory: 10448k freed [ 0.710628] DMA-API: preallocated 32768 debug entries [ 0.710631] DMA-API: debugging enabled by kernel config [ 0.710635] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.710638] Placing 64MB software IO TLB between ffff880001b9a000 - ffff880005b9a000 [ 0.710640] software IO TLB at phys 0x1b9a000 - 0x5b9a000 [ 0.712472] Scanning for low memory corruption every 60 seconds [ 0.712922] audit: initializing netlink socket (disabled) [ 0.712936] type=2000 audit(1283519483.708:1): initialized [ 0.713350] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.713754] VFS: Disk quotas dquot_6.5.2 [ 0.713801] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.713889] msgmni has been set to 7926 [ 0.714377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.714380] io scheduler noop registered [ 0.714382] io scheduler deadline registered [ 0.714419] io scheduler cfq registered (default) [ 0.715425] vesafb: framebuffer at 0xe5000000, mapped to 0xffffc90005100000, using 1536k, total 1536k [ 0.715428] vesafb: mode is 1024x768x16, linelength=2048, pages=0 [ 0.715430] vesafb: scrolling: redraw [ 0.715432] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.726483] Console: switching to colour frame buffer device 128x48 [ 0.736579] fb0: VESA VGA frame buffer device [ 0.736641] intel_idle: MWAIT substates: 0x20 [ 0.736643] intel_idle: does not run on family 6 model 23 [ 0.736746] ERST: Table is not found! [ 0.778767] Linux agpgart interface v0.103 [ 0.778905] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.799289] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.820322] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.823254] brd: module loaded [ 0.823570] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.823997] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.824006] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.824309] mice: PS/2 mouse device common for all mice [ 0.824412] rtc_cmos 00:04: RTC can wake from S4 [ 0.824501] rtc_cmos: dev (254:0) [ 0.824513] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.824536] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.824591] cpuidle: using governor ladder [ 0.824597] cpuidle: using governor menu [ 0.824901] TCP cubic registered [ 0.824904] NET: Registered protocol family 17 [ 0.824909] Registering the dns_resolver key type [ 0.847909] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.851953] registered taskstats version 1 [ 0.851956] IMA: No TPM chip found, activating TPM-bypass! [ 0.852360] rtc_cmos 00:04: setting system clock to 2010-09-03 13:11:24 UTC (1283519484) [ 0.852453] Freeing unused kernel memory: 540k freed [ 0.852567] Write protecting the kernel read-only data: 6144k [ 0.852772] Freeing unused kernel memory: 916k freed [ 0.853033] Freeing unused kernel memory: 348k freed [ 0.867562] udev: starting version 161 [ 0.867614] udevd (1039): /proc/1039/oom_adj is deprecated, please use /proc/1039/oom_score_adj instead. [ 0.900780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.900787] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 0.900834] alloc irq_desc for 18 on node -1 [ 0.900840] alloc kstat_irqs on node -1 [ 0.900852] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.900892] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.900897] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.900919] drivers/usb/core/inode.c: creating file 'devices' [ 0.900928] drivers/usb/core/inode.c: creating file '001' [ 0.901086] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.901097] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.901104] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 0.901158] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.922268] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.922273] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 0.922302] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xeb205000 [ 0.922307] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.926192] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.944114] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.944160] usb usb1: default language 0x0409 [ 0.944168] usb usb1: udev 1, busnum 1, minor = 0 [ 0.944172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.944176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.944181] usb usb1: Product: EHCI Host Controller [ 0.944184] usb usb1: Manufacturer: Linux 2.6.36-rc3-next-20100903 ehci_hcd [ 0.944188] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.944392] usb usb1: usb_probe_device [ 0.944397] usb usb1: configuration #1 chosen from 1 choice [ 0.944409] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.944435] hub 1-0:1.0: usb_probe_interface [ 0.944438] hub 1-0:1.0: usb_probe_interface - got id [ 0.944442] hub 1-0:1.0: USB hub found [ 0.944447] hub 1-0:1.0: 6 ports detected [ 0.944449] hub 1-0:1.0: standalone hub [ 0.944451] hub 1-0:1.0: no power switching (usb 1.0) [ 0.944453] hub 1-0:1.0: individual port over-current protection [ 0.944456] hub 1-0:1.0: power on to power good time: 20ms [ 0.944464] hub 1-0:1.0: local power source is good [ 0.944469] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.944529] drivers/usb/core/inode.c: creating file '001' [ 0.944601] alloc irq_desc for 23 on node -1 [ 0.944607] alloc kstat_irqs on node -1 [ 0.944615] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.944657] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.944661] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.944667] drivers/usb/core/inode.c: creating file '002' [ 0.944741] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.944751] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 0.944757] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 0.944813] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.958270] Uniform Multi-Platform E-IDE driver [ 0.962829] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.962833] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 0.962858] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xeb204000 [ 0.962864] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.964964] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.964986] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.964994] r8169 0000:04:00.0: enabling Mem-Wr-Inval [ 0.965049] r8169 0000:04:00.0: setting latency timer to 64 [ 0.965100] alloc irq_desc for 40 on node -1 [ 0.965105] alloc kstat_irqs on node -1 [ 0.965121] r8169 0000:04:00.0: irq 40 for MSI/MSI-X [ 0.965394] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc9000066a000, 00:1f:d0:9a:d6:63, XID 1c4000c0 IRQ 40 [ 0.966748] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.968680] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.968695] alloc irq_desc for 20 on node -1 [ 0.968698] alloc kstat_irqs on node -1 [ 0.968703] r8169 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.968710] r8169 0000:05:00.0: enabling Mem-Wr-Inval [ 0.968727] r8169 0000:05:00.0: (unregistered net_device): no PCI Express capability [ 0.968986] r8169 0000:05:00.0: eth1: RTL8169sb/8110sb at 0xffffc90000664000, 00:1f:1f:07:b0:bf, XID 10000000 IRQ 20 [ 0.976206] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.976358] usb usb2: default language 0x0409 [ 0.976366] usb usb2: udev 1, busnum 2, minor = 128 [ 0.976369] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.976372] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.976376] usb usb2: Product: EHCI Host Controller [ 0.976380] usb usb2: Manufacturer: Linux 2.6.36-rc3-next-20100903 ehci_hcd [ 0.976384] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.976555] usb usb2: usb_probe_device [ 0.976559] usb usb2: configuration #1 chosen from 1 choice [ 0.976570] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.976600] hub 2-0:1.0: usb_probe_interface [ 0.976603] hub 2-0:1.0: usb_probe_interface - got id [ 0.976606] hub 2-0:1.0: USB hub found [ 0.976611] hub 2-0:1.0: 6 ports detected [ 0.976614] hub 2-0:1.0: standalone hub [ 0.976616] hub 2-0:1.0: no power switching (usb 1.0) [ 0.976618] hub 2-0:1.0: individual port over-current protection [ 0.976621] hub 2-0:1.0: power on to power good time: 20ms [ 0.976627] hub 2-0:1.0: local power source is good [ 0.976631] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.976691] drivers/usb/core/inode.c: creating file '001' [ 0.980391] Floppy drive(s): fd0 is 1.44M [ 0.997266] jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02) [ 0.997284] JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001) [ 0.997292] JMicron IDE 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.997313] jmicron 0000:03:00.1: 100% native mode on irq 16 [ 0.997323] JMicron IDE 0000:03:00.1: enabling bus mastering [ 0.997329] JMicron IDE 0000:03:00.1: setting latency timer to 64 [ 0.997334] ide0: BM-DMA at 0xb400-0xb407 [ 0.997358] ide1: BM-DMA at 0xb408-0xb40f [ 0.997374] Probing IDE interface ide0... [ 0.997857] ohci1394 0000:05:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.999628] FDC 0 is a post-1991 82077 [ 1.007068] SCSI subsystem initialized [ 1.007419] uhci_hcd: USB Universal Host Controller Interface driver [ 1.007479] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.007490] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.007494] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.007505] drivers/usb/core/inode.c: creating file '003' [ 1.007635] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.007645] uhci_hcd 0000:00:1a.0: detected 2 ports [ 1.007649] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.007653] uhci_hcd 0000:00:1a.0: Performing full reset [ 1.007666] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 1.007687] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 [ 1.007754] usb usb3: default language 0x0409 [ 1.007761] usb usb3: udev 1, busnum 3, minor = 256 [ 1.007764] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.007771] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.007776] usb usb3: Product: UHCI Host Controller [ 1.007779] usb usb3: Manufacturer: Linux 2.6.36-rc3-next-20100903 uhci_hcd [ 1.007783] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.007870] usb usb3: usb_probe_device [ 1.007873] usb usb3: configuration #1 chosen from 1 choice [ 1.007880] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.007905] hub 3-0:1.0: usb_probe_interface [ 1.007908] hub 3-0:1.0: usb_probe_interface - got id [ 1.007913] hub 3-0:1.0: USB hub found [ 1.007918] hub 3-0:1.0: 2 ports detected [ 1.007921] hub 3-0:1.0: standalone hub [ 1.007923] hub 3-0:1.0: no power switching (usb 1.0) [ 1.007925] hub 3-0:1.0: individual port over-current protection [ 1.007928] hub 3-0:1.0: power on to power good time: 2ms [ 1.007933] hub 3-0:1.0: local power source is good [ 1.007936] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.007985] drivers/usb/core/inode.c: creating file '001' [ 1.008039] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 [ 1.008071] alloc irq_desc for 21 on node -1 [ 1.008076] alloc kstat_irqs on node -1 [ 1.008085] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.008094] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.008100] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.008108] drivers/usb/core/inode.c: creating file '004' [ 1.008169] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.008177] uhci_hcd 0000:00:1a.1: detected 2 ports [ 1.008182] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.008185] uhci_hcd 0000:00:1a.1: Performing full reset [ 1.008198] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 1.008216] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100 [ 1.008270] usb usb4: default language 0x0409 [ 1.008277] usb usb4: udev 1, busnum 4, minor = 384 [ 1.008280] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.008282] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.008286] usb usb4: Product: UHCI Host Controller [ 1.008290] usb usb4: Manufacturer: Linux 2.6.36-rc3-next-20100903 uhci_hcd [ 1.008292] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.008402] usb usb4: usb_probe_device [ 1.008405] usb usb4: configuration #1 chosen from 1 choice [ 1.008413] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.008448] hub 4-0:1.0: usb_probe_interface [ 1.008450] hub 4-0:1.0: usb_probe_interface - got id [ 1.008453] hub 4-0:1.0: USB hub found [ 1.008459] hub 4-0:1.0: 2 ports detected [ 1.008462] hub 4-0:1.0: standalone hub [ 1.008464] hub 4-0:1.0: no power switching (usb 1.0) [ 1.008466] hub 4-0:1.0: individual port over-current protection [ 1.008468] hub 4-0:1.0: power on to power good time: 2ms [ 1.008473] hub 4-0:1.0: local power source is good [ 1.008475] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.008522] drivers/usb/core/inode.c: creating file '001' [ 1.008552] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 [ 1.008578] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.008584] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.008591] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.008596] drivers/usb/core/inode.c: creating file '005' [ 1.008671] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.008681] uhci_hcd 0000:00:1a.2: detected 2 ports [ 1.008685] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.008689] uhci_hcd 0000:00:1a.2: Performing full reset [ 1.008702] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 1.008709] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500 [ 1.008760] usb usb5: default language 0x0409 [ 1.008768] usb usb5: udev 1, busnum 5, minor = 512 [ 1.008770] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.008773] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.008775] usb usb5: Product: UHCI Host Controller [ 1.008777] usb usb5: Manufacturer: Linux 2.6.36-rc3-next-20100903 uhci_hcd [ 1.008779] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.008852] usb usb5: usb_probe_device [ 1.008854] usb usb5: configuration #1 chosen from 1 choice [ 1.008860] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.008898] hub 5-0:1.0: usb_probe_interface [ 1.008900] hub 5-0:1.0: usb_probe_interface - got id [ 1.008903] hub 5-0:1.0: USB hub found [ 1.008910] hub 5-0:1.0: 2 ports detected [ 1.008913] hub 5-0:1.0: standalone hub [ 1.008916] hub 5-0:1.0: no power switching (usb 1.0) [ 1.008920] hub 5-0:1.0: individual port over-current protection [ 1.008923] hub 5-0:1.0: power on to power good time: 2ms [ 1.008929] hub 5-0:1.0: local power source is good [ 1.008934] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.008979] drivers/usb/core/inode.c: creating file '001' [ 1.009021] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 [ 1.009049] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.009055] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.009058] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.009063] drivers/usb/core/inode.c: creating file '006' [ 1.009108] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.009115] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.009119] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.009122] uhci_hcd 0000:00:1d.0: Performing full reset [ 1.009135] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 1.009143] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200 [ 1.009196] usb usb6: default language 0x0409 [ 1.009205] usb usb6: udev 1, busnum 6, minor = 640 [ 1.009208] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.009212] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.009214] usb usb6: Product: UHCI Host Controller [ 1.009216] usb usb6: Manufacturer: Linux 2.6.36-rc3-next-20100903 uhci_hcd [ 1.009218] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.009298] usb usb6: usb_probe_device [ 1.009300] usb usb6: configuration #1 chosen from 1 choice [ 1.009307] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.009335] hub 6-0:1.0: usb_probe_interface [ 1.009338] hub 6-0:1.0: usb_probe_interface - got id [ 1.009341] hub 6-0:1.0: USB hub found [ 1.009345] hub 6-0:1.0: 2 ports detected [ 1.009347] hub 6-0:1.0: standalone hub [ 1.009349] hub 6-0:1.0: no power switching (usb 1.0) [ 1.009352] hub 6-0:1.0: individual port over-current protection [ 1.009355] hub 6-0:1.0: power on to power good time: 2ms [ 1.009360] hub 6-0:1.0: local power source is good [ 1.009363] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.009442] drivers/usb/core/inode.c: creating file '001' [ 1.009492] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 [ 1.009513] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.009521] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.009525] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.009531] drivers/usb/core/inode.c: creating file '007' [ 1.009585] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.009592] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.009596] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.009599] uhci_hcd 0000:00:1d.1: Performing full reset [ 1.009612] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 1.009628] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300 [ 1.009677] usb usb7: default language 0x0409 [ 1.009685] usb usb7: udev 1, busnum 7, minor = 768 [ 1.009689] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.009691] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.009696] usb usb7: Product: UHCI Host Controller [ 1.009698] usb usb7: Manufacturer: Linux 2.6.36-rc3-next-20100903 uhci_hcd [ 1.009701] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.009812] usb usb7: usb_probe_device [ 1.009816] usb usb7: configuration #1 chosen from 1 choice [ 1.009823] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 1.009854] hub 7-0:1.0: usb_probe_interface [ 1.009856] hub 7-0:1.0: usb_probe_interface - got id [ 1.009860] hub 7-0:1.0: USB hub found [ 1.009864] hub 7-0:1.0: 2 ports detected [ 1.009866] hub 7-0:1.0: standalone hub [ 1.009869] hub 7-0:1.0: no power switching (usb 1.0) [ 1.009871] hub 7-0:1.0: individual port over-current protection [ 1.009873] hub 7-0:1.0: power on to power good time: 2ms [ 1.009878] hub 7-0:1.0: local power source is good [ 1.009881] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 1.009926] drivers/usb/core/inode.c: creating file '001' [ 1.009962] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 [ 1.009982] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.009988] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.009994] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.009999] drivers/usb/core/inode.c: creating file '008' [ 1.010079] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.010088] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.010093] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 1.010095] uhci_hcd 0000:00:1d.2: Performing full reset [ 1.010109] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 1.010116] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400 [ 1.010167] usb usb8: default language 0x0409 [ 1.010174] usb usb8: udev 1, busnum 8, minor = 896 [ 1.010177] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.010180] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.010182] usb usb8: Product: UHCI Host Controller [ 1.010184] usb usb8: Manufacturer: Linux 2.6.36-rc3-next-20100903 uhci_hcd [ 1.010186] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.010268] usb usb8: usb_probe_device [ 1.010271] usb usb8: configuration #1 chosen from 1 choice [ 1.010278] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 1.010317] hub 8-0:1.0: usb_probe_interface [ 1.010321] hub 8-0:1.0: usb_probe_interface - got id [ 1.010325] hub 8-0:1.0: USB hub found [ 1.010332] hub 8-0:1.0: 2 ports detected [ 1.010336] hub 8-0:1.0: standalone hub [ 1.010339] hub 8-0:1.0: no power switching (usb 1.0) [ 1.010343] hub 8-0:1.0: individual port over-current protection [ 1.010347] hub 8-0:1.0: power on to power good time: 2ms [ 1.010351] hub 8-0:1.0: local power source is good [ 1.010353] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 1.010392] drivers/usb/core/inode.c: creating file '001' [ 1.010427] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 [ 1.024896] libata version 3.00 loaded. [ 1.044098] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.044117] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 [ 1.044144] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[ea004000-ea0047ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.076034] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.076045] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.076061] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.076067] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.076072] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.076085] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.098806] ata_piix 0000:00:1f.2: version 2.13 [ 1.098826] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.098831] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.098892] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.099210] scsi0 : ata_piix [ 1.099355] scsi1 : ata_piix [ 1.099994] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14+ [ 1.100007] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15+ [ 1.100050] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.100056] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.100101] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.100330] scsi2 : ata_piix [ 1.100417] scsi3 : ata_piix [ 1.100889] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19+ [ 1.100893] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19+ [ 1.430594] ata3: SATA link down (SStatus 0 SControl 300) [ 1.441164] ata4: SATA link down (SStatus 0 SControl 300) [ 1.552009] ------------[ cut here ]------------ [ 1.552016] WARNING: at kernel/irq/manage.c:290 __enable_irq+0x40/0x67() [ 1.552018] Hardware name: EP45-UD3 [ 1.552020] Unbalanced enable for IRQ 16 [ 1.552022] Modules linked in: ata_generic(+) ata_piix ahci(+) libahci libata uhci_hcd ohci1394 jmicron(+) scsi_mod floppy ieee1394 r8169 mii ide_pci_generic ide_core thermal thermal_sys ehci_hcd [ 1.552039] Pid: 1155, comm: modprobe Not tainted 2.6.36-rc3-next-20100903 #1 [ 1.552042] Call Trace: [ 1.552048] [] warn_slowpath_common+0x80/0x98 [ 1.552052] [] warn_slowpath_fmt+0x41/0x43 [ 1.552055] [] __enable_irq+0x40/0x67 [ 1.552059] [] enable_irq+0x42/0x61 [ 1.552068] [] ide_probe_port+0x575/0x5a3 [ide_core] [ 1.552077] [] ide_host_register+0x2ad/0x66c [ide_core] [ 1.552086] [] ide_pci_init_two+0x58d/0x666 [ide_core] [ 1.552093] [] ? ida_get_new_above+0xfa/0x1b5 [ 1.552101] [] ? get_parent_ip+0x11/0x42 [ 1.552105] [] ? sysfs_find_dirent+0x3a/0x53 [ 1.552108] [] ? get_parent_ip+0x11/0x42 [ 1.552111] [] ? get_parent_ip+0x11/0x42 [ 1.552118] [] ide_pci_init_one+0x11/0x13 [ide_core] [ 1.552123] [] jmicron_init_one+0x12/0x14 [jmicron] [ 1.552127] [] local_pci_probe+0x48/0x91 [ 1.552130] [] pci_device_probe+0xc5/0xf5 [ 1.552135] [] ? driver_sysfs_add+0x6b/0x90 [ 1.552138] [] driver_probe_device+0x139/0x257 [ 1.552141] [] __driver_attach+0x58/0x7c [ 1.552144] [] ? __driver_attach+0x0/0x7c [ 1.552147] [] bus_for_each_dev+0x4e/0x83 [ 1.552151] [] driver_attach+0x19/0x1b [ 1.552153] [] bus_add_driver+0xd0/0x236 [ 1.552157] [] driver_register+0x99/0x10a [ 1.552160] [] __pci_register_driver+0x53/0xc3 [ 1.552164] [] ? jmicron_ide_init+0x0/0x20 [jmicron] [ 1.552168] [] jmicron_ide_init+0x1e/0x20 [jmicron] [ 1.552172] [] do_one_initcall+0x7a/0x134 [ 1.552176] [] sys_init_module+0x9c/0x1dd [ 1.552179] [] system_call_fastpath+0x16/0x1b [ 1.552182] ---[ end trace 196a652b1ce7a255 ]--- [ 1.552219] Probing IDE interface ide1... [ 1.908057] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.908069] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.908215] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.908228] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.908237] ata2.01: link offline, clearing class 3 to NONE [ 1.916120] ata2.00: ATAPI: ATAPI iHAS222 8, 4L01, max UDMA/100 [ 1.917095] ata1.00: HPA detected: current 1953523055, native 1953525168 [ 1.917100] ata1.00: ATA-8: WDC WD1002FBYS-01A6B0, 03.00C05, max UDMA/133 [ 1.917103] ata1.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.932192] ata2.00: configured for UDMA/100 [ 1.933116] ata1.00: configured for UDMA/133 [ 1.933257] scsi 0:0:0:0: Direct-Access ATA WDC WD1002FBYS-0 03.0 PQ: 0 ANSI: 5 [ 1.934777] scsi 1:0:0:0: CD-ROM ATAPI iHAS222 8 4L01 PQ: 0 ANSI: 5 [ 2.120055] ide0 at 0xb000-0xb007,0xb102 on irq 16 [ 2.120113] ide1 at 0xb200-0xb207,0xb302 on irq 16 [ 2.120173] ahci 0000:03:00.0: version 3.0 [ 2.120192] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.136015] usb usb3: suspend_rh (auto-stop) [ 2.136042] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 2.136045] usb usb4: suspend_rh (auto-stop) [ 2.136049] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 2.136057] ahci 0000:03:00.0: setting latency timer to 64 [ 2.136066] usb usb5: suspend_rh (auto-stop) [ 2.136085] usb usb6: suspend_rh (auto-stop) [ 2.136109] usb usb7: suspend_rh (auto-stop) [ 2.136130] usb usb8: suspend_rh (auto-stop) [ 2.136387] scsi4 : ahci [ 2.136477] scsi5 : ahci [ 2.136569] ata5: SATA max UDMA/133 abar m8192@0xeb100000 port 0xeb100100 irq 19+ [ 2.136573] ata6: SATA max UDMA/133 abar m8192@0xeb100000 port 0xeb100180 irq 19+ [ 2.242588] sd 0:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.242662] sd 0:0:0:0: [sda] Write Protect is off [ 2.242665] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.242693] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.275853] sda: sda1 sda2 sda3 [ 2.276183] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.316154] ieee1394: Host added: ID:BUS[0-00:1023] GUID[007ac0a300001fd0] [ 2.456039] ata6: SATA link down (SStatus 0 SControl 300) [ 2.456046] ata5: SATA link down (SStatus 0 SControl 300) [ 2.482195] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.482199] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.482322] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.486601] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.486650] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.804256] PM: Starting manual resume from disk [ 3.186467] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 3.186471] EXT4-fs (sda2): write access will be enabled during recovery [ 3.784128] hub 8-0:1.0: hub_suspend [ 3.784137] usb usb8: bus auto-suspend [ 3.784140] usb usb8: suspend_rh [ 3.800013] hub 3-0:1.0: hub_suspend [ 3.800020] usb usb3: bus auto-suspend [ 3.800023] usb usb3: suspend_rh [ 3.800039] hub 4-0:1.0: hub_suspend [ 3.800045] usb usb4: bus auto-suspend [ 3.800048] usb usb4: suspend_rh [ 3.800062] hub 5-0:1.0: hub_suspend [ 3.800076] usb usb5: bus auto-suspend [ 3.800077] usb usb5: suspend_rh [ 3.800096] hub 6-0:1.0: hub_suspend [ 3.800099] usb usb6: bus auto-suspend [ 3.800101] usb usb6: suspend_rh [ 3.800115] hub 7-0:1.0: hub_suspend [ 3.800118] usb usb7: bus auto-suspend [ 3.800120] usb usb7: suspend_rh [ 3.824011] hub 1-0:1.0: hub_suspend [ 3.824016] usb usb1: bus auto-suspend [ 3.824019] ehci_hcd 0000:00:1a.7: suspend root hub [ 3.824041] hub 2-0:1.0: hub_suspend [ 3.824045] usb usb2: bus auto-suspend [ 3.824047] ehci_hcd 0000:00:1d.7: suspend root hub [ 15.128011] IRQ 14: ata_piix: can't verify IRQ, will keep polling [ 15.128014] IRQ 14: ata_piix: system performance may be affected [ 21.178289] EXT4-fs (sda2): recovery complete [ 21.200019] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 24.776504] udev: starting version 161 [ 26.156802] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input1 [ 26.412551] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 26.973887] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 26.974033] ACPI: Power Button [PWRB] [ 26.974115] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 26.974158] ACPI: Power Button [PWRF] [ 27.132705] i2c-core: driver [dummy] registered [ 27.144300] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 27.165060] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 27.165069] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 27.165102] i2c i2c-0: adapter [SMBus I801 adapter at 0500] registered [ 27.212070] parport_pc 00:09: reported by Plug and Play ACPI [ 27.212113] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 27.282420] ACPI: acpi_idle registered with cpuidle [ 27.282460] Marking TSC unstable due to TSC halts in idle [ 27.282527] Switching to clocksource hpet [ 27.514455] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 28.326721] [drm] Initialized drm 1.1.0 20060810 [ 28.668844] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 28.668850] nouveau 0000:01:00.0: setting latency timer to 64 [ 28.672054] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x096080c1) [ 28.672059] checking generic (e5000000 180000) vs hw (d0000000 10000000) [ 28.672061] checking generic (e5000000 180000) vs hw (e4000000 2000000) [ 28.672063] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver [ 28.672260] Console: switching to colour dummy device 80x25 [ 28.676410] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 28.733899] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 28.733903] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 28.733905] [drm] nouveau 0000:01:00.0: Bios version 62.94.4b.00 [ 28.733908] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 28.733911] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 28.733914] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028 [ 28.733916] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030 [ 28.733919] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 [ 28.733921] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02022332 00c20090 [ 28.733923] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 02023342 00c00090 [ 28.733926] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 28.733929] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 28.733931] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [ 28.733934] [drm] nouveau 0000:01:00.0: 2: 0x00002261: type 0x61 idx 2 tag 0x08 [ 28.733938] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD20A [ 28.784124] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD657 [ 28.800010] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE6A7 [ 28.800017] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE7F0 [ 28.808127] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEA5C [ 28.808129] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEAC1 [ 28.832018] [drm] nouveau 0000:01:00.0: 0xEAC1: Condition still not met after 20ms, skipping following opcodes [ 28.832048] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM [ 28.919473] [TTM] Zone kernel: Available graphics memory: 2030022 kiB. [ 28.919475] [TTM] Initializing pool allocator. [ 28.934153] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 28.934159] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 28.935065] [drm] nouveau 0000:01:00.0: unknown connector type: 0xff!! [ 28.955814] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 28.959636] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 28.959688] i2c i2c-1: adapter [nouveau-0000:01:00.0-0] registered [ 28.959694] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 28.959697] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 28.962925] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 28.962928] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 28.966151] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 28.966154] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 29.062686] i2c i2c-2: adapter [nouveau-0000:01:00.0-1] registered [ 29.062692] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 29.062695] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 29.066336] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 29.111112] i2c i2c-3: adapter [nouveau-0000:01:00.0-3] registered [ 29.111117] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 29.111120] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 29.114729] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 29.116242] [drm] nouveau 0000:01:00.0: allocated 1920x1200 fb: 0x40240000, bo ffff88012a834400 [ 29.116359] fbcon: nouveaufb (fb0) is primary device [ 29.116445] Console: switching to colour frame buffer device 240x75 [ 29.119964] fb0: nouveaufb frame buffer device [ 29.119966] drm: registered panic notifier [ 29.119972] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 29.175638] alloc irq_desc for 22 on node -1 [ 29.175642] alloc kstat_irqs on node -1 [ 29.175650] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 29.175713] alloc irq_desc for 41 on node -1 [ 29.175715] alloc kstat_irqs on node -1 [ 29.175725] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X [ 29.175749] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 29.175753] ALSA sound/pci/hda/hda_intel.c:2517: chipset global capabilities = 0x4401 [ 29.204011] ALSA sound/pci/hda/hda_intel.c:907: codec_mask = 0x4 [ 29.204116] ALSA sound/pci/hda/hda_intel.c:1345: codec #2 probed OK [ 29.274678] ALSA sound/pci/hda/patch_realtek.c:1353: SKU: Nid=0x1d sku_cfg=0x4005e601 [ 29.274684] ALSA sound/pci/hda/patch_realtek.c:1355: SKU: port_connectivity=0x1 [ 29.274688] ALSA sound/pci/hda/patch_realtek.c:1356: SKU: enable_pcbeep=0x0 [ 29.274693] ALSA sound/pci/hda/patch_realtek.c:1357: SKU: check_sum=0x00000005 [ 29.274700] ALSA sound/pci/hda/patch_realtek.c:1358: SKU: customization=0x000000e6 [ 29.274705] ALSA sound/pci/hda/patch_realtek.c:1359: SKU: external_amp=0x0 [ 29.274711] ALSA sound/pci/hda/patch_realtek.c:1360: SKU: platform_type=0x0 [ 29.274719] ALSA sound/pci/hda/patch_realtek.c:1361: SKU: swap=0x0 [ 29.274723] ALSA sound/pci/hda/patch_realtek.c:1362: SKU: override=0x1 [ 29.274730] ALSA sound/pci/hda/hda_codec.c:3720: hda_codec: model '6stack-dig' is selected for config 1458:a002 (Gigabyte P35 DS3R) [ 29.277293] ALSA sound/pci/hda/hda_codec.c:2145: Cannot find slave Headphone Playback Volume, skipped [ 29.277297] ALSA sound/pci/hda/hda_codec.c:2145: Cannot find slave Speaker Playback Volume, skipped [ 29.277300] ALSA sound/pci/hda/hda_codec.c:2145: Cannot find slave Mono Playback Volume, skipped [ 29.277303] ALSA sound/pci/hda/hda_codec.c:2145: Cannot find slave Line-Out Playback Volume, skipped [ 29.277306] ALSA sound/pci/hda/hda_codec.c:2145: Cannot find slave PCM Playback Volume, skipped [ 29.277318] ALSA sound/pci/hda/hda_codec.c:2145: Cannot find slave Speaker Playback Switch, skipped [ 29.277321] ALSA sound/pci/hda/hda_codec.c:2145: Cannot find slave Mono Playback Switch, skipped [ 29.277326] ALSA sound/pci/hda/hda_codec.c:2145: Cannot find slave Line-Out Playback Switch, skipped [ 29.277329] ALSA sound/pci/hda/hda_codec.c:2145: Cannot find slave PCM Playback Switch, skipped [ 32.512562] Adding 9462280k swap on /dev/sda3. Priority:-1 extents:1 across:9462280k [ 32.516272] EXT4-fs (sda2): re-mounted. Opts: (null) [ 32.816054] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 32.968054] loop: module loaded [ 33.065707] it87: Found IT8718F chip at 0x290, revision 5 [ 33.065715] it87: VID is disabled (pins used for GPIO) [ 33.065724] it87: Beeping is supported [ 36.000039] EXT3-fs: barriers not enabled [ 36.012074] kjournald starting. Commit interval 5 seconds [ 36.024021] EXT3-fs (sda1): using internal journal [ 36.024027] EXT3-fs (sda1): mounted filesystem with writeback data mode [ 38.414283] r8169 0000:05:00.0: eth1: link down [ 39.136022] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 39.136026] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 39.139245] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 39.139247] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 39.142471] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 39.142474] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 39.148094] r8169 0000:04:00.0: eth0: link up [ 39.148102] r8169 0000:04:00.0: eth0: link up [ 39.238978] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 39.238981] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 39.242598] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 39.287356] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 39.287359] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 39.290970] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 39.619971] fuse init (API version 7.15) [ 41.597592] lp0: using parport0 (interrupt-driven). [ 41.597595] lp0: console ready [ 41.609681] ppdev: user-space parallel port driver [ 43.962392] NET: Registered protocol family 10 [ 43.962953] lo: Disabled Privacy Extensions [ 43.963639] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 49.312025] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 49.312029] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 49.315249] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 49.315251] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 49.318477] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 49.318479] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 49.415031] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 49.415034] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 49.418644] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 49.463403] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 49.463405] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 49.467014] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 54.600008] eth0: no IPv6 routers present [ 57.674026] Bluetooth: Core ver 2.15 [ 57.674063] NET: Registered protocol family 31 [ 57.674064] Bluetooth: HCI device and connection manager initialized [ 57.674067] Bluetooth: HCI socket layer initialized [ 57.687231] Bluetooth: L2CAP ver 2.15 [ 57.687233] Bluetooth: L2CAP socket layer initialized [ 57.855844] Bluetooth: RFCOMM TTY layer initialized [ 57.855852] Bluetooth: RFCOMM socket layer initialized [ 57.855854] Bluetooth: RFCOMM ver 1.11 [ 57.942043] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 57.942046] Bluetooth: BNEP filters: protocol multicast [ 58.094336] Bluetooth: SCO (Voice Link) ver 0.6 [ 58.094339] Bluetooth: SCO socket layer initialized [ 59.488025] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 59.488029] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 59.491247] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 59.491250] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 59.494479] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 59.494481] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 59.590786] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 59.590788] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 59.594393] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 59.639156] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 59.639159] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 59.642763] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 69.664021] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 69.664025] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 69.667243] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 69.667246] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 69.670535] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 69.670538] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 69.767535] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 69.767538] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 69.771146] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 69.815944] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 69.815946] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 69.819557] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 79.840082] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 79.840095] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 79.843321] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 79.843323] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 79.846548] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 79.846551] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 79.942878] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 79.942880] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 79.946489] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 79.991247] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 79.991249] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 79.994858] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 90.016025] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 90.016030] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 90.019257] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 90.019259] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 90.022497] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 90.022500] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 90.118918] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 90.118921] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 90.122537] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 90.167295] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 90.167298] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 90.170908] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 100.192022] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 100.192026] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 100.195244] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 100.195246] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 100.198591] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 100.198594] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 100.295317] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 100.295320] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 100.298997] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 100.343756] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 100.343758] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 100.347409] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 110.368023] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 110.368027] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 110.371249] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 110.371252] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 110.374562] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 110.374565] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 110.471148] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 110.471151] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 110.474787] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 110.519546] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 110.519549] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 110.523210] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 120.544020] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 120.544024] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 120.547242] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 120.547245] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 120.550470] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 120.550472] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 120.646774] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 120.646776] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 120.650386] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 120.695144] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 120.695146] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 120.698755] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 130.720022] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 130.720026] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 130.723244] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 130.723247] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 130.726472] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 130.726474] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 130.823255] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 130.823258] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 130.826873] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 130.871632] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 130.871635] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 130.875243] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 140.896026] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 140.896031] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 140.899252] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 140.899254] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 140.902479] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 140.902481] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 140.998819] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 140.998822] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 141.002431] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 141.047189] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 141.047192] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 141.050800] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 151.072019] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 151.072023] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 151.075241] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 151.075244] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 151.078468] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 151.078470] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 151.174784] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 151.174786] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 151.178395] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 151.223153] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 151.223156] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 151.226763] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 161.248020] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 161.248024] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 161.251242] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 161.251244] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 161.254583] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 161.254586] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 161.350924] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 161.350927] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 161.354574] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 161.399333] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 161.399336] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 161.402983] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 171.424022] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 171.424026] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 171.427244] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 171.427246] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 171.430471] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 171.430474] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 171.526771] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 171.526774] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 171.530385] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 171.575143] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 171.575146] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 171.578754] i2c i2c-3: NAK from device addr 0x50 msg #0 [ 181.600020] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 181.600024] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 181.603242] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 181.603245] i2c i2c-1: master_xfer[1] R, addr=0x50, len=1 [ 181.606469] i2c i2c-1: master_xfer[0] W, addr=0x50, len=1 [ 181.606472] i2c i2c-1: master_xfer[1] R, addr=0x50, len=128 [ 181.702814] i2c i2c-2: master_xfer[0] W, addr=0x50, len=1 [ 181.702816] i2c i2c-2: master_xfer[1] R, addr=0x50, len=1 [ 181.706426] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 181.751185] i2c i2c-3: master_xfer[0] W, addr=0x50, len=1 [ 181.751187] i2c i2c-3: master_xfer[1] R, addr=0x50, len=1 [ 181.754796] i2c i2c-3: NAK from device addr 0x50 msg #0