[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.5.0-25-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #38-Ubuntu SMP Mon Feb 18 23:28:26 UTC 2013 (Ubuntu 3.5.0-25.38-generic 3.5.7.4) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfecffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfedffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: Sony Corporation VGN-FZ21M/VAIO, BIOS R1120J7 07/04/2007 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 3GB, range: 1GB, type UC [ 0.000000] reg 1, base: 0GB, range: 4GB, type WB [ 0.000000] reg 2, base: 4GB, range: 1GB, type WB [ 0.000000] reg 3, base: 3071MB, range: 1MB, type UC [ 0.000000] total RAM covered: 4095M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC [ 0.000000] reg 3, base: 4GB, range: 1GB, type WB [ 0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved [ 0.000000] found SMP MP-table at [mem 0x000f8090-0x000f809f] mapped at [c00f8090] [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff] [ 0.000000] [mem 0x00000000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x379fffff] page 2M [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff] [ 0.000000] RAMDISK: [mem 0x356c6000-0x36b5afff] [ 0.000000] ACPI: RSDP 000f8060 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT bfed7f39 00084 (v01 Sony VAIO 20070704 PTL 00000000) [ 0.000000] ACPI: FACP bfedfc04 000F4 (v03 Sony VAIO 20070704 PTL 00000001) [ 0.000000] ACPI: DSDT bfed9217 06979 (v02 Sony VAIO 20070704 PTL 20050624) [ 0.000000] ACPI: FACS bfee2fc0 00040 [ 0.000000] ACPI: APIC bfedfcf8 00068 (v01 Sony VAIO 20070704 PTL 0000005A) [ 0.000000] ACPI: HPET bfedfd60 00038 (v01 Sony VAIO 20070704 PTL 0000005A) [ 0.000000] ACPI: MCFG bfedfd98 0003C (v01 Sony VAIO 20070704 PTL 0000005A) [ 0.000000] ACPI: SLIC bfedfdd4 00176 (v01 Sony VAIO 20070704 PTL 01000000) [ 0.000000] ACPI: TMOR bfedff4a 00026 (v01 Sony VAIO 20070704 PTL 00000003) [ 0.000000] ACPI: APIC bfedff70 00068 (v01 Sony VAIO 20070704 PTL 00000000) [ 0.000000] ACPI: BOOT bfedffd8 00028 (v01 Sony VAIO 20070704 PTL 00000001) [ 0.000000] ACPI: SSDT bfed90fa 0011D (v01 Sony VAIO 20070704 PTL 20050624) [ 0.000000] ACPI: SSDT bfed85a5 00287 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.000000] ACPI: SSDT bfed84f1 000B4 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.000000] ACPI: SSDT bfed7fbd 00534 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4228MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x37bfdfff] [ 0.000000] HighMem [mem 0x37bfe000-0x3fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xbfecffff] [ 0.000000] node 0: [mem 0x00000000-0x3fffffff] [ 0.000000] On node 0 totalpages: 1048159 [ 0.000000] free_area_init_node: node 0, pgdat c18a4940, node_mem_map f2ec6200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8457 pages used for memmap [ 0.000000] HighMem zone: 811465 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bcf000 s34176 r0 d23168 u57344 [ 0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037918 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-25-generic root=UUID=2d4adc2a-6fff-4d5f-b437-8a3254431f19 ro =1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10485632 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:00140000) [ 0.000000] Memory: 4108748k/5242880k available (5967k kernel code, 83888k reserved, 2934k data, 756k init, 3279688k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc18b2000 - 0xc196f000 ( 756 kB) [ 0.000000] .data : 0xc15d3de4 - 0xc18b1800 (2934 kB) [ 0.000000] .text : 0xc1000000 - 0xc15d3de4 (5967 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 16 [ 0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: PIT calibration matches HPET. 1 loops [ 0.000000] Detected 1994.959 MHz processor. [ 0.008002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.91 BogoMIPS (lpj=7979836) [ 0.008241] pid_max: default: 32768 minimum: 301 [ 0.008382] Security Framework initialized [ 0.008513] AppArmor: AppArmor initialized [ 0.008630] Yama: becoming mindful. [ 0.008793] Mount-cache hash table entries: 512 [ 0.009125] Initializing cgroup subsys cpuacct [ 0.009245] Initializing cgroup subsys memory [ 0.009370] Initializing cgroup subsys devices [ 0.009490] Initializing cgroup subsys freezer [ 0.009609] Initializing cgroup subsys blkio [ 0.009727] Initializing cgroup subsys perf_event [ 0.009874] CPU: Physical Processor ID: 0 [ 0.009992] CPU: Processor Core ID: 0 [ 0.010111] mce: CPU supports 6 MCE banks [ 0.010233] CPU0: Thermal monitoring enabled (TM2) [ 0.010352] using mwait in idle threads. [ 0.013507] ACPI: Core revision 20120320 [ 0.020027] ftrace: allocating 24614 entries in 49 pages [ 0.028068] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028634] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.070342] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 0.072003] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072003] PEBS disabled due to CPU errata. [ 0.072003] ... version: 2 [ 0.072003] ... bit width: 40 [ 0.072003] ... generic registers: 2 [ 0.072003] ... value mask: 000000ffffffffff [ 0.072003] ... max period: 000000007fffffff [ 0.072003] ... fixed-purpose events: 3 [ 0.072003] ... event mask: 0000000700000003 [ 0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.072003] CPU 1 irqstacks, hard=f6ce2000 soft=f6ce4000 [ 0.072003] Booting Node 0, Processors #1 Ok. [ 0.012000] Initializing CPU#1 [ 0.083259] Brought up 2 CPUs [ 0.083497] Total of 2 processors activated (7979.83 BogoMIPS). [ 0.084092] devtmpfs: initialized [ 0.084350] EVM: security.selinux [ 0.084466] EVM: security.SMACK64 [ 0.084584] EVM: security.capability [ 0.084715] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes) [ 0.085302] dummy: [ 0.085459] RTC time: 20:24:15, date: 02/27/13 [ 0.085620] NET: Registered protocol family 16 [ 0.085749] Trying to unpack rootfs image as initramfs... [ 0.085902] EISA bus registered [ 0.086079] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.088008] ACPI: bus type pci registered [ 0.088194] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.088332] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.088455] PCI: Using MMCONFIG for extended config space [ 0.089985] PCI: Using configuration type 1 for base access [ 0.100166] bio: create slab at 0 [ 0.100357] ACPI: Added _OSI(Module Device) [ 0.100478] ACPI: Added _OSI(Processor Device) [ 0.100597] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.104010] ACPI: Added _OSI(Processor Aggregator Device) [ 0.105892] ACPI: EC: Look up EC in DSDT [ 0.108992] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.110327] ACPI: SSDT bfed8d75 002A1 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.111106] ACPI: Dynamic OEM Table Load: [ 0.111438] ACPI: SSDT (null) 002A1 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.111914] ACPI: SSDT bfed882c 004B7 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.112660] ACPI: Dynamic OEM Table Load: [ 0.112994] ACPI: SSDT (null) 004B7 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.113647] ACPI: SSDT bfed9016 000E4 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.114419] ACPI: Dynamic OEM Table Load: [ 0.114750] ACPI: SSDT (null) 000E4 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.115195] ACPI: SSDT bfed8ce3 00092 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.115954] ACPI: Dynamic OEM Table Load: [ 0.116232] ACPI: SSDT (null) 00092 (v01 Sony VAIO 20070704 PTL 20050624) [ 0.316129] ACPI: Interpreter enabled [ 0.316270] ACPI: (supports S0 S3 S4 S5) [ 0.316831] ACPI: Using IOAPIC for interrupt routing [ 0.332634] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.338528] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.338843] ACPI: No dock devices found. [ 0.338969] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.339623] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.340443] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.340447] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.340450] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.340454] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.340457] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.340460] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.340464] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored) [ 0.340467] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) [ 0.340470] PCI: root bus 00: using default resources [ 0.340507] PCI host bridge to bus 0000:00 [ 0.340628] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.340751] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] [ 0.340885] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 [ 0.340947] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400 [ 0.341003] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.341064] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.341128] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f] [ 0.341176] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.341239] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f] [ 0.341305] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.341332] pci 0000:00:1a.7: reg 10: [mem 0xfc404800-0xfc404bff] [ 0.341451] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.341489] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.341514] pci 0000:00:1b.0: reg 10: [mem 0xfc400000-0xfc403fff 64bit] [ 0.341632] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.341668] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.341792] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.341832] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 0.341955] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.341995] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400 [ 0.342118] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.342160] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 [ 0.342282] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.342321] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.342384] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f] [ 0.342434] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.342497] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f] [ 0.342545] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.342610] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f] [ 0.342673] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.342700] pci 0000:00:1d.7: reg 10: [mem 0xfc404c00-0xfc404fff] [ 0.342818] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.342849] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.342959] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 [ 0.343082] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.343224] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.343415] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a [ 0.343434] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.343448] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.343462] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.343475] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.343489] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af] [ 0.343549] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 [ 0.343579] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df] [ 0.343594] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf] [ 0.343608] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7] [ 0.343621] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb] [ 0.343635] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff] [ 0.343649] pci 0000:00:1f.2: reg 24: [mem 0xfc404000-0xfc4047ff] [ 0.343723] pci 0000:00:1f.2: PME# supported from D3hot [ 0.343750] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.343769] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff] [ 0.343816] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] [ 0.343953] pci 0000:01:00.0: [10de:0426] type 00 class 0x030000 [ 0.344001] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff] [ 0.344061] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.344112] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit] [ 0.344148] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.344183] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.376041] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.376094] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.376098] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff] [ 0.376104] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.376175] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.376222] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.376228] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.376237] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.376306] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 0.376352] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.376359] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.376368] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.376510] pci 0000:06:00.0: [8086:4229] type 00 class 0x028000 [ 0.376576] pci 0000:06:00.0: reg 10: [mem 0xfa000000-0xfa001fff 64bit] [ 0.376819] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.384076] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 0.384124] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.384130] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 0.384139] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.384240] pci 0000:08:00.0: [11ab:4351] type 00 class 0x020000 [ 0.384276] pci 0000:08:00.0: reg 10: [mem 0xfc000000-0xfc003fff 64bit] [ 0.384295] pci 0000:08:00.0: reg 18: [io 0x6000-0x60ff] [ 0.384463] pci 0000:08:00.0: supports D1 D2 [ 0.384466] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.392046] pci 0000:00:1c.4: PCI bridge to [bus 08-08] [ 0.392096] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.392102] pci 0000:00:1c.4: bridge window [mem 0xfc000000-0xfc0fffff] [ 0.392171] pci 0000:09:03.0: [104c:8039] type 02 class 0x060700 [ 0.392200] pci 0000:09:03.0: reg 10: [mem 0xfc100000-0xfc100fff] [ 0.392248] pci 0000:09:03.0: supports D1 D2 [ 0.392251] pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.392284] pci 0000:09:03.1: [104c:803a] type 00 class 0x0c0010 [ 0.392312] pci 0000:09:03.1: reg 10: [mem 0xfc102000-0xfc1027ff] [ 0.392329] pci 0000:09:03.1: reg 14: [mem 0xfc104000-0xfc107fff] [ 0.392445] pci 0000:09:03.1: supports D1 D2 [ 0.392448] pci 0000:09:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.392478] pci 0000:09:03.2: [104c:803b] type 00 class 0x018000 [ 0.392505] pci 0000:09:03.2: reg 10: [mem 0xfc101000-0xfc101fff] [ 0.392629] pci 0000:09:03.2: supports D1 D2 [ 0.392632] pci 0000:09:03.2: PME# supported from D0 D1 D2 D3hot [ 0.392713] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] (subtractive decode) [ 0.392764] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff] [ 0.392774] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.392777] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.392836] pci_bus 0000:0a: [bus 0a-0d] partially hidden behind transparent bridge 0000:09 [bus 09-0a] [ 0.392927] pci_bus 0000:00: on NUMA node 0 [ 0.392936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.393169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.393345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.393451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.393555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.393660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.393943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.394239] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.394407] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00 [ 0.394459] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.407917] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.408368] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.408864] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.409327] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.409825] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.410361] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.410824] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.411325] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.411901] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.411959] vgaarb: loaded [ 0.412027] vgaarb: bridge control possible 0000:01:00.0 [ 0.412319] SCSI subsystem initialized [ 0.412417] libata version 3.00 loaded. [ 0.412443] ACPI: bus type usb registered [ 0.412511] usbcore: registered new interface driver usbfs [ 0.412563] usbcore: registered new interface driver hub [ 0.412637] usbcore: registered new device driver usb [ 0.412779] PCI: Using ACPI for IRQ routing [ 0.424581] PCI: pci_cache_line_size set to 64 bytes [ 0.424773] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.424780] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff] [ 0.424919] NetLabel: Initializing [ 0.424977] NetLabel: domain hash size = 128 [ 0.425032] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.425100] NetLabel: unlabeled traffic allowed by default [ 0.425257] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.425321] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.425559] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.428148] Switching to clocksource hpet [ 0.438258] AppArmor: AppArmor Filesystem Enabled [ 0.438353] pnp: PnP ACPI init [ 0.438425] ACPI: bus type pnp registered [ 0.445080] pnp 00:00: [bus 00-ff] [ 0.445086] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.445089] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.445092] pnp 00:00: [io 0x0d00-0xffff window] [ 0.445095] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.445099] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.445101] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.445104] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.445107] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.445110] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.445113] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.445118] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.445121] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.445124] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.445127] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.445130] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.445133] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.445136] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.445139] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 0.445142] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 0.445145] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.445228] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.445320] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.445323] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.445326] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.445328] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.445331] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.445334] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 0.445336] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.445339] pnp 00:01: [mem 0xfed45000-0xfed8ffff] [ 0.445412] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.445475] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.445535] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.445596] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.445655] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.445715] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.445777] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.445837] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.445897] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.446136] pnp 00:02: [io 0x0000-0x001f] [ 0.446139] pnp 00:02: [io 0x0081-0x0091] [ 0.446142] pnp 00:02: [io 0x0093-0x009f] [ 0.446145] pnp 00:02: [io 0x00c0-0x00df] [ 0.446148] pnp 00:02: [dma 4] [ 0.446198] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.446209] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.446258] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.446335] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.446413] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.446474] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.446489] pnp 00:05: [io 0x00f0] [ 0.446502] pnp 00:05: [irq 13] [ 0.446553] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.446567] pnp 00:06: [io 0x002e-0x002f] [ 0.446570] pnp 00:06: [io 0x004e-0x004f] [ 0.446573] pnp 00:06: [io 0x0061] [ 0.446576] pnp 00:06: [io 0x0063] [ 0.446578] pnp 00:06: [io 0x0065] [ 0.446581] pnp 00:06: [io 0x0067] [ 0.446584] pnp 00:06: [io 0x0080] [ 0.446586] pnp 00:06: [io 0x0092] [ 0.446589] pnp 00:06: [io 0x00b2-0x00b3] [ 0.446592] pnp 00:06: [io 0x0680-0x069f] [ 0.446594] pnp 00:06: [io 0x0800-0x080f] [ 0.446597] pnp 00:06: [io 0x1000-0x107f] [ 0.446600] pnp 00:06: [io 0x1180-0x11bf] [ 0.446603] pnp 00:06: [io 0x1640-0x164f] [ 0.446605] pnp 00:06: [io 0xfe00-0xfe7f] [ 0.446608] pnp 00:06: [io 0xfe80-0xfeff] [ 0.446699] system 00:06: [io 0x0680-0x069f] has been reserved [ 0.446758] system 00:06: [io 0x0800-0x080f] has been reserved [ 0.446818] system 00:06: [io 0x1000-0x107f] has been reserved [ 0.446879] system 00:06: [io 0x1180-0x11bf] has been reserved [ 0.446938] system 00:06: [io 0x1640-0x164f] has been reserved [ 0.446997] system 00:06: [io 0xfe00-0xfe7f] has been reserved [ 0.447058] system 00:06: [io 0xfe80-0xfeff] has been reserved [ 0.447118] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.447130] pnp 00:07: [io 0x0070-0x0077] [ 0.447137] pnp 00:07: [irq 8] [ 0.447188] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.447206] pnp 00:08: [io 0x0060] [ 0.447209] pnp 00:08: [io 0x0064] [ 0.447215] pnp 00:08: [irq 1] [ 0.447267] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.447282] pnp 00:09: [irq 12] [ 0.447338] pnp 00:09: Plug and Play ACPI device, IDs SNY9001 PNP0f13 (active) [ 0.447361] pnp: PnP ACPI: found 10 devices [ 0.447418] ACPI: ACPI bus type pnp unregistered [ 0.447477] PnPBIOS: Disabled by ACPI PNP [ 0.483991] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08-08] add_size 200000 [ 0.484029] pci 0000:09:03.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.484033] pci 0000:09:03.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.484037] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 09-0a] add_size 1000 [ 0.484041] pci 0000:09:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.484045] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 09-0a] add_size 4000000 [ 0.484056] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.484060] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.484063] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.484071] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref] [ 0.484141] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4000000-0xc41fffff 64bit pref] [ 0.484209] pci 0000:00:1e.0: BAR 13: assigned [io 0x7000-0x7fff] [ 0.484269] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc4200000-0xc42000ff] [ 0.484338] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.484399] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.484457] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.484517] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff] [ 0.484579] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.484647] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 0.484709] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.484772] pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff] [ 0.484834] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.484907] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 0.484966] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.485029] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.485095] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.485168] pci 0000:00:1c.2: PCI bridge to [bus 06-07] [ 0.485227] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] [ 0.485290] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff] [ 0.485354] pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.485426] pci 0000:00:1c.4: PCI bridge to [bus 08-08] [ 0.485487] pci 0000:00:1c.4: bridge window [io 0x6000-0x6fff] [ 0.485549] pci 0000:00:1c.4: bridge window [mem 0xfc000000-0xfc0fffff] [ 0.485612] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xc41fffff 64bit pref] [ 0.485687] pci 0000:09:03.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 [ 0.485690] pci 0000:09:03.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 [ 0.485694] pci 0000:09:03.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.485697] pci 0000:09:03.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 [ 0.485700] pci 0000:09:03.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref] [ 0.485769] pci 0000:09:03.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff] [ 0.485828] pci 0000:09:03.0: BAR 13: assigned [io 0x7000-0x70ff] [ 0.485887] pci 0000:09:03.0: BAR 14: assigned [io 0x7400-0x74ff] [ 0.485946] pci 0000:09:03.0: CardBus bridge to [bus 0a-0d] [ 0.486004] pci 0000:09:03.0: bridge window [io 0x7000-0x70ff] [ 0.486066] pci 0000:09:03.0: bridge window [io 0x7400-0x74ff] [ 0.486128] pci 0000:09:03.0: bridge window [mem 0xc0000000-0xc3ffffff pref] [ 0.486196] pci 0000:09:03.0: bridge window [mem 0xc8000000-0xcbffffff] [ 0.486259] pci 0000:00:1e.0: PCI bridge to [bus 09-0a] [ 0.486319] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff] [ 0.486382] pci 0000:00:1e.0: bridge window [mem 0xfc100000-0xfc1fffff] [ 0.486446] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref] [ 0.486576] pci 0000:00:1e.0: setting latency timer to 64 [ 0.486591] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.486595] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff] [ 0.486598] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.486601] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff] [ 0.486604] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.486607] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.486610] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff] [ 0.486613] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.486616] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.486619] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.486622] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref] [ 0.486625] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff] [ 0.486628] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.486631] pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref] [ 0.486634] pci_bus 0000:08: resource 0 [io 0x6000-0x6fff] [ 0.486637] pci_bus 0000:08: resource 1 [mem 0xfc000000-0xfc0fffff] [ 0.486640] pci_bus 0000:08: resource 2 [mem 0xc4000000-0xc41fffff 64bit pref] [ 0.486643] pci_bus 0000:09: resource 0 [io 0x7000-0x7fff] [ 0.486646] pci_bus 0000:09: resource 1 [mem 0xfc100000-0xfc1fffff] [ 0.486649] pci_bus 0000:09: resource 2 [mem 0xc0000000-0xc3ffffff pref] [ 0.486652] pci_bus 0000:09: resource 4 [io 0x0000-0xffff] [ 0.486655] pci_bus 0000:09: resource 5 [mem 0x00000000-0xfffffffff] [ 0.486658] pci_bus 0000:0a: resource 0 [io 0x7000-0x70ff] [ 0.486660] pci_bus 0000:0a: resource 1 [io 0x7400-0x74ff] [ 0.486663] pci_bus 0000:0a: resource 2 [mem 0xc0000000-0xc3ffffff pref] [ 0.486667] pci_bus 0000:0a: resource 3 [mem 0xc8000000-0xcbffffff] [ 0.486716] NET: Registered protocol family 2 [ 0.486842] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.487073] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.487597] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.487884] TCP: Hash tables configured (established 131072 bind 65536) [ 0.487942] TCP: reno registered [ 0.488028] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.488096] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.488237] NET: Registered protocol family 1 [ 0.488623] PCI: CLS 64 bytes, default 64 [ 0.488684] Simple Boot Flag at 0x36 set to 0x1 [ 0.489130] audit: initializing netlink socket (disabled) [ 0.489198] type=2000 audit(1361996655.484:1): initialized [ 0.513098] highmem bounce pool size: 64 pages [ 0.513172] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.515595] VFS: Disk quotas dquot_6.5.2 [ 0.515708] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.516403] fuse init (API version 7.19) [ 0.516549] msgmni has been set to 1619 [ 0.516954] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.517050] io scheduler noop registered [ 0.517107] io scheduler deadline registered (default) [ 0.517170] io scheduler cfq registered [ 0.517887] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.518003] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.518146] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X [ 0.518288] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X [ 0.518430] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.518542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.518621] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.518767] intel_idle: does not run on family 6 model 15 [ 0.520050] ACPI: AC Adapter [ADP1] (on-line) [ 0.520223] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.520887] ACPI: Lid Switch [LID0] [ 0.521020] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.521140] ACPI: Power Button [PWRB] [ 0.521536] ACPI: Requesting acpi_cpufreq [ 0.552216] Freeing initrd memory: 21076k freed [ 0.565318] Monitor-Mwait will be used to enter C-1 state [ 0.565327] Monitor-Mwait will be used to enter C-2 state [ 0.565332] Monitor-Mwait will be used to enter C-3 state [ 0.565336] Marking TSC unstable due to TSC halts in idle [ 0.565411] ACPI: acpi_idle registered with cpuidle [ 0.583591] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.583684] ACPI: Thermal Zone [TZ00] (52 C) [ 0.583838] ACPI: Invalid active0 threshold [ 0.585355] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.585450] ACPI: Thermal Zone [TZ01] (52 C) [ 0.585523] ACPI: Battery Slot [BAT0] (battery present) [ 0.585623] GHES: HEST is not enabled! [ 0.585731] isapnp: Scanning for PnP cards... [ 0.585784] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.587139] Linux agpgart interface v0.103 [ 0.589107] brd: module loaded [ 0.589956] loop: module loaded [ 0.590137] ahci 0000:00:1f.2: version 3.0 [ 0.590204] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 0.590273] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode [ 0.590342] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 0.590411] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.590787] scsi0 : ahci [ 0.590924] scsi1 : ahci [ 0.591043] scsi2 : ahci [ 0.591184] ata1: SATA max UDMA/133 abar m2048@0xfc404000 port 0xfc404100 irq 45 [ 0.591252] ata2: DUMMY [ 0.591308] ata3: DUMMY [ 0.591396] ata_piix 0000:00:1f.1: version 2.13 [ 0.591440] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.591747] scsi3 : ata_piix [ 0.591860] scsi4 : ata_piix [ 0.592400] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 0.592459] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 0.592870] Fixed MDIO Bus: probed [ 0.592977] tun: Universal TUN/TAP device driver, 1.6 [ 0.593034] tun: (C) 1999-2004 Max Krasnyansky [ 0.593134] PPP generic driver version 2.4.2 [ 0.593231] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.593323] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.593327] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.593392] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.593485] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.597437] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.597455] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404800 [ 0.608053] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.608133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.608192] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.608257] usb usb1: Product: EHCI Host Controller [ 0.608314] usb usb1: Manufacturer: Linux 3.5.0-25-generic ehci_hcd [ 0.608372] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.608563] hub 1-0:1.0: USB hub found [ 0.608623] hub 1-0:1.0: 4 ports detected [ 0.608784] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.608789] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.608851] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.608942] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.612878] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.612896] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404c00 [ 0.624027] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.624100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.624163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.624228] usb usb2: Product: EHCI Host Controller [ 0.624285] usb usb2: Manufacturer: Linux 3.5.0-25-generic ehci_hcd [ 0.624344] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.624515] hub 2-0:1.0: USB hub found [ 0.624574] hub 2-0:1.0: 6 ports detected [ 0.624715] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.624793] uhci_hcd: USB Universal Host Controller Interface driver [ 0.624874] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.624879] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.624940] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.625045] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.625137] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.625196] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.625261] usb usb3: Product: UHCI Host Controller [ 0.625318] usb usb3: Manufacturer: Linux 3.5.0-25-generic uhci_hcd [ 0.625376] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.625530] hub 3-0:1.0: USB hub found [ 0.625589] hub 3-0:1.0: 2 ports detected [ 0.625730] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.625735] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.625795] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.625897] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.625991] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.626051] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.626116] usb usb4: Product: UHCI Host Controller [ 0.626173] usb usb4: Manufacturer: Linux 3.5.0-25-generic uhci_hcd [ 0.626232] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.626385] hub 4-0:1.0: USB hub found [ 0.626444] hub 4-0:1.0: 2 ports detected [ 0.626582] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.626586] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.626647] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.626738] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 0.626829] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.626888] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.626953] usb usb5: Product: UHCI Host Controller [ 0.627011] usb usb5: Manufacturer: Linux 3.5.0-25-generic uhci_hcd [ 0.627069] usb usb5: SerialNumber: 0000:00:1d.0 [ 0.627224] hub 5-0:1.0: USB hub found [ 0.627282] hub 5-0:1.0: 2 ports detected [ 0.627418] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.627422] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.627481] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.627583] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 0.627675] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.627734] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.627800] usb usb6: Product: UHCI Host Controller [ 0.627857] usb usb6: Manufacturer: Linux 3.5.0-25-generic uhci_hcd [ 0.627916] usb usb6: SerialNumber: 0000:00:1d.1 [ 0.628088] hub 6-0:1.0: USB hub found [ 0.628146] hub 6-0:1.0: 2 ports detected [ 0.628285] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.628289] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.628351] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.628442] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 0.628535] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.628596] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.628661] usb usb7: Product: UHCI Host Controller [ 0.628717] usb usb7: Manufacturer: Linux 3.5.0-25-generic uhci_hcd [ 0.628774] usb usb7: SerialNumber: 0000:00:1d.2 [ 0.628929] hub 7-0:1.0: USB hub found [ 0.628988] hub 7-0:1.0: 2 ports detected [ 0.629180] usbcore: registered new interface driver libusual [ 0.629286] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.634219] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.634279] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.634450] mousedev: PS/2 mouse device common for all mice [ 0.634805] rtc_cmos 00:07: RTC can wake from S4 [ 0.635015] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.635108] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.635232] device-mapper: uevent: version 1.0.3 [ 0.635359] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.635473] EISA: Probing bus 0 at eisa.0 [ 0.635534] Cannot allocate resource for EISA slot 1 [ 0.635591] Cannot allocate resource for EISA slot 2 [ 0.635647] Cannot allocate resource for EISA slot 3 [ 0.635704] Cannot allocate resource for EISA slot 4 [ 0.635773] Cannot allocate resource for EISA slot 5 [ 0.635830] Cannot allocate resource for EISA slot 6 [ 0.635886] Cannot allocate resource for EISA slot 7 [ 0.635947] EISA: Detected 0 cards. [ 0.636071] cpuidle: using governor ladder [ 0.636203] cpuidle: using governor menu [ 0.636261] EFI Variables Facility v0.08 2004-May-17 [ 0.636507] ashmem: initialized [ 0.636706] TCP: cubic registered [ 0.636894] NET: Registered protocol family 10 [ 0.637161] NET: Registered protocol family 17 [ 0.637282] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 0.637405] Key type dns_resolver registered [ 0.637525] Using IPI No-Shortcut mode [ 0.637662] PM: Hibernation image not present or could not be loaded. [ 0.637676] registered taskstats version 1 [ 0.640615] Key type trusted registered [ 0.644590] Key type encrypted registered [ 0.647418] Magic number: 1:501:448 [ 0.647579] rtc_cmos 00:07: setting system clock to 2013-02-27 20:24:16 UTC (1361996656) [ 0.763815] ata4.00: ATAPI: MATSHITABD-CMB UJ-120, 1.01, max UDMA/33 [ 0.780335] ata4.00: configured for UDMA/33 [ 0.916051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.920044] usb 1-2: new high-speed USB device number 2 using ehci_hcd [ 0.940086] isapnp: No Plug & Play device found [ 1.055960] usb 1-2: New USB device found, idVendor=05ca, idProduct=183b [ 1.056031] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.123259] ACPI: Battery Slot [BAT0] (battery present) [ 1.123816] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.123879] EDD information not available. [ 1.124000] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded [ 1.124010] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.178647] ata1.00: ATA-8: ST9500325AS, 0002BSM1, max UDMA/133 [ 1.178706] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.180902] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded [ 1.180906] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.182691] ata1.00: configured for UDMA/133 [ 1.182925] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0002 PQ: 0 ANSI: 5 [ 1.183139] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.183159] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.183415] sd 0:0:0:0: [sda] Write Protect is off [ 1.183474] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.183538] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.291411] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > [ 1.292439] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.294638] scsi 3:0:0:0: CD-ROM MATSHITA BD-CMB UJ-120 1.01 PQ: 0 ANSI: 5 [ 1.297800] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.297867] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.298070] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.298191] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 1.298467] Freeing unused kernel memory: 756k freed [ 1.298905] Write protecting the kernel text: 5968k [ 1.299011] Write protecting the kernel read-only data: 2428k [ 1.299083] NX-protecting the kernel data: 4272k [ 1.319615] udevd[103]: starting version 175 [ 1.371361] wmi: Mapper loaded [ 1.373881] sky2: driver version 1.30 [ 1.374019] sky2 0000:08:00.0: Yukon-2 FE chip revision 1 [ 1.374192] sky2 0000:08:00.0: irq 46 for MSI/MSI-X [ 1.379290] sky2 0000:08:00.0: eth0: addr 00:1a:80:1e:ee:7c [ 1.382189] [drm] Initialized drm 1.1.0 20060810 [ 1.396724] nouveau 0000:01:00.0: enabling device (0000 -> 0003) [ 1.397351] [drm] nouveau 0000:01:00.0: unsupported chipset 0xffffffff [ 1.399382] nouveau: probe of 0000:01:00.0 failed with error -22 [ 1.480125] firewire_ohci 0000:09:03.1: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2 [ 1.576068] usb 5-1: new full-speed USB device number 2 using uhci_hcd [ 1.755865] usb 5-1: New USB device found, idVendor=046d, idProduct=c52f [ 1.755939] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.756022] usb 5-1: Product: USB Receiver [ 1.756113] usb 5-1: Manufacturer: Logitech [ 1.769952] usbcore: registered new interface driver usbhid [ 1.770035] usbhid: USB HID core driver [ 1.772959] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input3 [ 1.773207] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0 [ 1.776970] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input4 [ 1.777251] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1 [ 1.980189] firewire_core 0000:09:03.1: created device fw0: GUID 08004603027b35e3, S400 [ 2.000043] usb 5-2: new low-speed USB device number 3 using uhci_hcd [ 2.174861] usb 5-2: New USB device found, idVendor=046d, idProduct=c315 [ 2.174939] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.175017] usb 5-2: Product: Logitech USB Keyboard [ 2.175090] usb 5-2: Manufacturer: Logitech [ 2.192480] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input5 [ 2.192685] hid-generic 0003:046D:C315.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.0-2/input0 [ 2.432058] usb 7-1: new full-speed USB device number 2 using uhci_hcd [ 2.604571] usb 7-1: New USB device found, idVendor=044e, idProduct=3011 [ 2.604646] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.604718] usb 7-1: Product: BCM2045B2 [ 2.604790] usb 7-1: Manufacturer: Broadcom [ 2.606606] hub 7-1:1.0: USB hub found [ 2.608572] hub 7-1:1.0: 3 ports detected [ 3.069575] usb 7-1.1: new full-speed USB device number 3 using uhci_hcd [ 3.202570] usb 7-1.1: New USB device found, idVendor=044e, idProduct=3010 [ 3.202643] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.202725] usb 7-1.1: Product: BCM2046 Bluetooth Device [ 3.202800] usb 7-1.1: Manufacturer: Broadcom Corp [ 3.202868] usb 7-1.1: SerialNumber: 001BFB58B31F [ 3.277574] usb 7-1.2: new full-speed USB device number 4 using uhci_hcd [ 3.396573] usb 7-1.2: New USB device found, idVendor=044e, idProduct=3013 [ 3.396646] usb 7-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.402178] input: HID 044e:3013 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.2/7-1.2:1.0/input/input6 [ 3.402356] hid-generic 0003:044E:3013.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 044e:3013] on usb-0000:00:1d.2-1.2/input0 [ 3.477570] usb 7-1.3: new full-speed USB device number 5 using uhci_hcd [ 3.596567] usb 7-1.3: New USB device found, idVendor=044e, idProduct=3012 [ 3.596642] usb 7-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.604452] input: HID 044e:3012 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1.3/7-1.3:1.0/input/input7 [ 3.604659] hid-generic 0003:044E:3012.0005: input,hidraw4: USB HID v1.11 Mouse [HID 044e:3012] on usb-0000:00:1d.2-1.3/input0 [ 4.694822] EXT3-fs (sda3): recovery required on readonly filesystem [ 4.694840] EXT3-fs (sda3): write access will be enabled during recovery [ 6.299229] kjournald starting. Commit interval 5 seconds [ 6.299281] EXT3-fs (sda3): orphan cleanup on readonly fs [ 6.299304] ext3_orphan_cleanup: deleting unreferenced inode 244852 [ 6.299334] ext3_orphan_cleanup: deleting unreferenced inode 244847 [ 6.299342] ext3_orphan_cleanup: deleting unreferenced inode 244846 [ 6.299351] ext3_orphan_cleanup: deleting unreferenced inode 244834 [ 6.299358] ext3_orphan_cleanup: deleting unreferenced inode 244813 [ 6.299365] ext3_orphan_cleanup: deleting unreferenced inode 244809 [ 6.299371] ext3_orphan_cleanup: deleting unreferenced inode 244808 [ 6.299377] ext3_orphan_cleanup: deleting unreferenced inode 244807 [ 6.299383] EXT3-fs (sda3): 8 orphan inodes deleted [ 6.365624] EXT3-fs (sda3): recovery complete [ 6.365637] EXT3-fs (sda3): mounted filesystem with ordered data mode [ 45.921766] Adding 6143996k swap on /dev/sda7. Priority:-1 extents:1 across:6143996k [ 46.774577] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 46.824255] udevd[486]: starting version 175 [ 47.123734] type=1400 audit(1361993102.971:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=588 comm="apparmor_parser" [ 47.124573] type=1400 audit(1361993102.975:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=588 comm="apparmor_parser" [ 47.125022] type=1400 audit(1361993102.975:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=588 comm="apparmor_parser" [ 47.431342] cfg80211: Calling CRDA to update world regulatory domain [ 47.542570] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 47.542585] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 47.542589] lpc_ich: Resource conflict(s) found affecting iTCO_wdt [ 47.542596] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251) [ 47.542604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 47.542610] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251) [ 47.542618] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 47.542622] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 47.643176] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1 [ 47.646227] cfg80211: World regulatory domain updated: [ 47.646233] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 47.646238] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 47.646242] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 47.646247] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 47.646251] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 47.646255] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 47.668531] Linux video capture interface: v2.00 [ 47.727513] sony_laptop: Sony Notebook Control Driver v0.6 [ 47.728967] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/SNY5001:00/input/input8 [ 47.729210] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:27/SNY5001:00/input/input9 [ 47.748426] yenta_cardbus 0000:09:03.0: CardBus bridge found [104d:9005] [ 47.748458] yenta_cardbus 0000:09:03.0: Enabling burst memory read transactions [ 47.748467] yenta_cardbus 0000:09:03.0: Using CSCINT to route CSC interrupts to PCI [ 47.748472] yenta_cardbus 0000:09:03.0: Routing CardBus interrupts to PCI [ 47.748482] yenta_cardbus 0000:09:03.0: TI: mfunc 0x01121b22, devctl 0x64 [ 47.786390] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1 [ 47.790359] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 47.836119] uvcvideo: Found UVC 1.00 device (05ca:183b) [ 47.836453] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 47.837082] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 47.837129] uvcvideo: Failed to initialize the device (-5). [ 47.837217] usbcore: registered new interface driver uvcvideo [ 47.837221] USB Video Class driver (1.1.1) [ 47.918540] Bluetooth: Core ver 2.16 [ 47.918778] NET: Registered protocol family 31 [ 47.918783] Bluetooth: HCI device and connection manager initialized [ 47.918867] Bluetooth: HCI socket layer initialized [ 47.918871] Bluetooth: L2CAP socket layer initialized [ 47.918880] Bluetooth: SCO socket layer initialized [ 47.980892] yenta_cardbus 0000:09:03.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 47.980902] yenta_cardbus 0000:09:03.0: Socket status: 30000006 [ 47.980909] pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d [ 47.980923] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [io 0x7000-0x7fff] [ 47.980930] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: [ 47.997285] excluding 0x7000-0x70ff 0x7400-0x74ff [ 48.006347] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0xfc100000-0xfc1fffff] [ 48.006357] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfc100000-0xfc1fffff: [ 48.006363] excluding 0xfc100000-0xfc10ffff [ 48.006387] yenta_cardbus 0000:09:03.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref] [ 48.006393] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: [ 48.006415] excluding 0xc0000000-0xc3ffffff [ 48.016986] lp: driver loaded but no devices found [ 48.068109] usbcore: registered new interface driver btusb [ 48.080566] usb 7-1.2: input irq status -75 received [ 48.097567] usb 7-1.2: input irq status -75 received [ 48.104136] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree: [ 48.104140] iwl4965: Copyright(c) 2003-2011 Intel Corporation [ 48.104315] iwl4965 0000:06:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4 [ 48.113548] usb 7-1.2: input irq status -75 received [ 48.129545] usb 7-1.2: input irq status -75 received [ 48.145570] usb 7-1.2: input irq status -75 received [ 48.147237] iwl4965 0000:06:00.0: device EEPROM VER=0x36, CALIB=0x5 [ 48.147266] iwl4965 0000:06:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 48.147487] iwl4965 0000:06:00.0: irq 47 for MSI/MSI-X [ 48.152273] iwl4965 0000:06:00.0: loaded firmware version 228.61.2.24 [ 48.152575] Registered led device: phy0-led [ 48.152624] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 48.161569] usb 7-1.2: input irq status -75 received [ 48.177572] usb 7-1.2: input irq status -75 received [ 48.193566] usb 7-1.2: input irq status -75 received [ 48.209552] usb 7-1.2: input irq status -75 received [ 48.217140] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: [ 48.217538] EXT3-fs (sda3): using internal journal [ 48.218975] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 [ 48.219951] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: [ 48.220469] excluding 0x3f0-0x3f7 0x4d0-0x4d7 [ 48.220937] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: [ 48.221675] clean. [ 48.221706] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: [ 48.222518] clean. [ 48.222556] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: [ 48.222566] excluding 0xc0000-0xcffff 0xdc000-0xfffff [ 48.222615] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: [ 48.222635] excluding 0xa0000000-0xa0ffffff [ 48.222668] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: [ 48.222687] excluding 0x60000000-0x60ffffff [ 48.222720] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: [ 48.223546] clean. [ 48.225572] usb 7-1.2: input irq status -75 received [ 48.241554] usb 7-1.2: input irq status -75 received [ 48.257553] usb 7-1.2: input irq status -75 received [ 48.273554] usb 7-1.2: input irq status -75 received [ 48.289570] usb 7-1.2: input irq status -75 received [ 48.305566] usb 7-1.2: input irq status -75 received [ 48.321566] usb 7-1.2: input irq status -75 received [ 48.337563] usb 7-1.2: input irq status -75 received [ 48.350244] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs' [ 48.353570] usb 7-1.2: input irq status -75 received [ 48.369551] usb 7-1.2: input irq status -75 received [ 48.385572] usb 7-1.2: input irq status -75 received [ 48.401566] usb 7-1.2: input irq status -75 received [ 48.580196] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10 [ 48.593859] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11 [ 48.616435] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 48.685531] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 48.685683] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 48.817085] nvidia: module license 'NVIDIA' taints kernel. [ 48.817093] Disabling lock debugging due to kernel taint [ 48.844991] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 48.845046] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0426) [ 48.845046] NVRM: installed in this system is not supported by the 304.64 [ 48.845046] NVRM: NVIDIA Linux driver release. Please see 'Appendix [ 48.845046] NVRM: A - Supported NVIDIA GPU Products' in this release's [ 48.845046] NVRM: README, available on the Linux driver download page [ 48.845046] NVRM: at www.nvidia.com. [ 48.845074] nvidia: probe of 0000:01:00.0 failed with error -1 [ 48.845238] NVRM: The NVIDIA probe routine failed for 1 device(s). [ 48.845242] NVRM: None of the NVIDIA graphics adapters were initialized! [ 50.080834] FS-Cache: Loaded [ 50.163072] FS-Cache: Netfs 'cifs' registered for caching [ 50.163702] Key type cifs.spnego registered [ 50.163719] Key type cifs.idmap registered [ 50.164166] CIFS: no cache= option specified, using "cache=loose". This default will change to "cache=strict" in 3.7. [ 50.215670] CIFS VFS: Error connecting to socket. Aborting operation [ 50.215809] CIFS VFS: cifs_mount failed w/return code = -101 [ 55.022409] kjournald starting. Commit interval 5 seconds [ 55.022911] EXT3-fs (sda6): using internal journal [ 55.022917] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 55.035582] CIFS VFS: Error connecting to socket. Aborting operation [ 55.035745] CIFS VFS: cifs_mount failed w/return code = -101 [ 60.398963] init: udev-fallback-graphics main process (996) terminated with status 1 [ 60.586726] kjournald starting. Commit interval 5 seconds [ 60.634637] EXT3-fs (sda8): using internal journal [ 60.634642] EXT3-fs (sda8): mounted filesystem with ordered data mode [ 60.812829] kjournald starting. Commit interval 5 seconds [ 60.813726] EXT3-fs (sda9): using internal journal [ 60.813732] EXT3-fs (sda9): mounted filesystem with ordered data mode [ 60.825343] CIFS VFS: Error connecting to socket. Aborting operation [ 60.825458] CIFS VFS: cifs_mount failed w/return code = -101 [ 73.545137] kjournald starting. Commit interval 5 seconds [ 73.545909] EXT3-fs (sda5): using internal journal [ 73.545914] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 77.661298] init: failsafe main process (1051) killed by TERM signal [ 77.673951] CIFS VFS: Error connecting to socket. Aborting operation [ 77.674376] CIFS VFS: cifs_mount failed w/return code = -101 [ 77.769889] ppdev: user-space parallel port driver [ 77.776800] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 77.776807] Bluetooth: BNEP filters: protocol multicast [ 77.803390] CIFS VFS: Error connecting to socket. Aborting operation [ 77.804166] CIFS VFS: cifs_mount failed w/return code = -101 [ 77.832066] Bluetooth: RFCOMM TTY layer initialized [ 77.832077] Bluetooth: RFCOMM socket layer initialized [ 77.832081] Bluetooth: RFCOMM ver 1.11 [ 77.895250] type=1400 audit(1361993133.744:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1178 comm="apparmor_parser" [ 77.901827] type=1400 audit(1361993133.752:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1178 comm="apparmor_parser" [ 77.974072] type=1400 audit(1361993133.824:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1204 comm="apparmor_parser" [ 77.976125] type=1400 audit(1361993133.828:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1205 comm="apparmor_parser" [ 77.976804] type=1400 audit(1361993133.828:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=1205 comm="apparmor_parser" [ 77.987173] type=1400 audit(1361993133.836:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=1209 comm="apparmor_parser" [ 77.987872] type=1400 audit(1361993133.836:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=1209 comm="apparmor_parser" [ 77.991515] type=1400 audit(1361993133.840:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=1211 comm="apparmor_parser" [ 77.992207] type=1400 audit(1361993133.844:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=1211 comm="apparmor_parser" [ 78.004663] type=1400 audit(1361993133.856:14): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1212 comm="apparmor_parser" [ 78.389656] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 78.390186] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 78.413959] sky2 0000:08:00.0: eth1: enabling interface [ 78.418783] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 78.422000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 78.511210] init: gdm main process (1328) killed by TERM signal [ 78.772047] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 79.737262] apm: BIOS not found. [ 80.262473] sky2 0000:08:00.0: eth1: Link is up at 100 Mbps, full duplex, flow control rx [ 80.262779] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 81.275982] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem [ 81.276071] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0426) [ 81.276071] NVRM: installed in this system is not supported by the 304.64 [ 81.276071] NVRM: NVIDIA Linux driver release. Please see 'Appendix [ 81.276071] NVRM: A - Supported NVIDIA GPU Products' in this release's [ 81.276071] NVRM: README, available on the Linux driver download page [ 81.276071] NVRM: at www.nvidia.com. [ 81.276100] nvidia: probe of 0000:01:00.0 failed with error -1 [ 81.276749] NVRM: The NVIDIA probe routine failed for 1 device(s). [ 81.276754] NVRM: None of the NVIDIA graphics adapters were initialized! [ 81.351012] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem [ 81.351067] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0426) [ 81.351067] NVRM: installed in this system is not supported by the 304.64 [ 81.351067] NVRM: NVIDIA Linux driver release. Please see 'Appendix [ 81.351067] NVRM: A - Supported NVIDIA GPU Products' in this release's [ 81.351067] NVRM: README, available on the Linux driver download page [ 81.351067] NVRM: at www.nvidia.com. [ 81.351094] nvidia: probe of 0000:01:00.0 failed with error -1 [ 81.351135] NVRM: The NVIDIA probe routine failed for 1 device(s). [ 81.351139] NVRM: None of the NVIDIA graphics adapters were initialized! [ 82.808194] wlan0: authenticate with bc:05:43:ea:1d:c7 [ 82.819760] wlan0: send auth to bc:05:43:ea:1d:c7 (try 1/3) [ 82.823452] wlan0: authenticated [ 82.836085] wlan0: associate with bc:05:43:ea:1d:c7 (try 1/3) [ 82.839969] wlan0: RX AssocResp from bc:05:43:ea:1d:c7 (capab=0x431 status=0 aid=1) [ 82.868760] wlan0: associated [ 82.869077] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 82.869176] cfg80211: Calling CRDA for country: DE [ 82.879621] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 82.879629] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879634] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 82.879638] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879642] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 82.879646] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879649] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 82.879654] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879657] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 82.879661] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879665] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 82.879669] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879673] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 82.879677] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879680] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 82.879684] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879688] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 82.879692] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879696] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 82.879700] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879704] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 82.879708] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879711] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 82.879716] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879719] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 82.879723] cfg80211: 2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879727] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule: [ 82.879731] cfg80211: 5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879735] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule: [ 82.879739] cfg80211: 5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879743] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule: [ 82.879747] cfg80211: 5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879751] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule: [ 82.879755] cfg80211: 5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879759] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule: [ 82.879763] cfg80211: 5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879766] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule: [ 82.879771] cfg80211: 5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879774] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule: [ 82.879779] cfg80211: 5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879782] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule: [ 82.879786] cfg80211: 5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm) [ 82.879790] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule: [ 82.879794] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879798] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule: [ 82.879802] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879806] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule: [ 82.879810] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879814] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule: [ 82.879818] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879821] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule: [ 82.879826] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879829] cfg80211: Updating information on frequency 5600 MHz for a 20 MHz width channel with regulatory rule: [ 82.879833] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879837] cfg80211: Updating information on frequency 5620 MHz for a 20 MHz width channel with regulatory rule: [ 82.879841] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879845] cfg80211: Updating information on frequency 5640 MHz for a 20 MHz width channel with regulatory rule: [ 82.879849] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879853] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule: [ 82.879857] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879861] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule: [ 82.879865] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879868] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule: [ 82.879872] cfg80211: 5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A mBi, 2698 mBm) [ 82.879879] cfg80211: Regulatory domain changed to country: DE [ 82.879882] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 82.879886] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 82.879890] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 82.879894] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 82.879898] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 95.704134] CIFS VFS: Error connecting to socket. Aborting operation [ 95.704250] CIFS VFS: cifs_mount failed w/return code = -113 [ 104.882835] init: plymouth-stop pre-start process (4233) terminated with status 1 [ 105.496028] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0 [ 108.128147] CIFS VFS: Error connecting to socket. Aborting operation [ 108.128289] CIFS VFS: cifs_mount failed w/return code = -113 [ 156.245415] show_signal_msg: 60 callbacks suppressed [ 156.245425] update-notifier[4660]: segfault at 20 ip b6e9f0ce sp bf942ca0 error 4 in libgobject-2.0.so.0.3400.1[b6e8d000+4e000] [ 453.014081] ptrace of pid 3829 was attempted by: opera (pid 4948) [ 453.114404] ptrace of pid 3829 was attempted by: opera (pid 4948) [ 453.214516] ptrace of pid 3829 was attempted by: opera (pid 4948) [ 453.314608] ptrace of pid 3829 was attempted by: opera (pid 4948) [ 453.545258] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem [ 453.545313] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0426) [ 453.545313] NVRM: installed in this system is not supported by the 304.64 [ 453.545313] NVRM: NVIDIA Linux driver release. Please see 'Appendix [ 453.545313] NVRM: A - Supported NVIDIA GPU Products' in this release's [ 453.545313] NVRM: README, available on the Linux driver download page [ 453.545313] NVRM: at www.nvidia.com. [ 453.545340] nvidia: probe of 0000:01:00.0 failed with error -1 [ 453.545385] NVRM: The NVIDIA probe routine failed for 1 device(s). [ 453.545389] NVRM: None of the NVIDIA graphics adapters were initialized! [ 453.608975] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem [ 453.609032] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0426) [ 453.609032] NVRM: installed in this system is not supported by the 304.64 [ 453.609032] NVRM: NVIDIA Linux driver release. Please see 'Appendix [ 453.609032] NVRM: A - Supported NVIDIA GPU Products' in this release's [ 453.609032] NVRM: README, available on the Linux driver download page [ 453.609032] NVRM: at www.nvidia.com. [ 453.609059] nvidia: probe of 0000:01:00.0 failed with error -1 [ 453.609105] NVRM: The NVIDIA probe routine failed for 1 device(s). [ 453.609109] NVRM: None of the NVIDIA graphics adapters were initialized! [ 461.360195] CIFS VFS: Error connecting to socket. Aborting operation [ 461.360330] CIFS VFS: cifs_mount failed w/return code = -113 [ 471.044116] CIFS VFS: Error connecting to socket. Aborting operation [ 471.044206] CIFS VFS: cifs_mount failed w/return code = -113 [ 475.336133] usb 5-2: USB disconnect, device number 3 [ 491.508968] sky2 0000:08:00.0: eth1: Link is down [ 496.308912] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready