<html> <head> <base href="https://bugs.freedesktop.org/" /> </head> <body> <div> <a class="bz_bug_link bz_status_RESOLVED bz_closed" title="RESOLVED NOTABUG - Cannot set pwm1 above 80 on GeForce 9600 GT, 10de:0622" href="https://bugs.freedesktop.org/show_bug.cgi?id=80507#c5">Comment # 5</a> on <a class="bz_bug_link bz_status_RESOLVED bz_closed" title="RESOLVED NOTABUG - Cannot set pwm1 above 80 on GeForce 9600 GT, 10de:0622" href="https://bugs.freedesktop.org/show_bug.cgi?id=80507">bug 80507</a> from <a class="email" href="mailto:martin.peres@ensi-bourges.fr" title="Martin Peres <martin.peres@ensi-bourges.fr>"> Martin Peres</a> <pre>(In reply to <a href="show_bug.cgi?id=80507#c4">comment #4</a>) > Ben initially thought it was a bug as he thought he had a vbios from the > same card indicating it should go higher, but apparently he may have been > looking at the wrong one. pwm1_max is 80, yeah. apparently ideally I should > send the vbios to verify, but Fedora's kernel config doesn't seem to provide > the necessary bits...I only filed this as Ben thought it was a bug, so let's > just close it for now. This is not the first vbios I see with pwm_max set to 80, hence why I thought straight away about this. You can force the pwm1_max to 100 if you really want to make it go to 100%, but I wouldn't do that. Anyway, thanks for the quick response!</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the assignee for the bug.</li> </ul> </body> </html>