<div dir="ltr">I mistakenly only replied to Yijing Wang the first time. Here are the further details. <div class="">uname -a: Linux p5-133 3.15.2-p5-133 #1 Thu Jun 26 22:56:27 EDT 2014 i586 GNU/Linux<img class="" id=":jn" src="https://mail.google.com/mail/u/0/images/cleardot.gif" alt=""> </div><div class=""> </div>Here is the output from lspci -vvvxxx: root@p5-133:~# cat lspci.txt 00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 64 00: 86 80 2d 12 06 00 00 22 01 00 00 06 00 40 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 88 00 41 00 00 00 00 03 49 10 55 55 55 05 55 05 60: 08 10 18 20 20 00 00 00 0f 00 00 00 00 00 00 00 70: 00 00 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00:07.0 ISA bridge: Intel Corporation 82371FB PIIX ISA [Triton I] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00: 86 80 2e 12 0f 00 80 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 4d 00 60 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 0b 0b 0b 09 00 00 00 00 00 f2 05 00 00 00 00 00 70: 0f 80 00 00 00 00 04 04 02 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 03 00 e0 00 02 d0 00 a0 13 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 08 02 00 00 00 00 00 00 00:07.1 IDE interface: Intel Corporation 82371FB PIIX IDE [Triton I] (rev 02) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at ef80 [size=16] Kernel driver in use: pata_oldpiix 00: 86 80 30 12 05 00 80 02 02 80 01 01 00 40 00 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 81 ef 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40: 36 a3 07 a3 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 08 02 00 00 00 00 00 00 00:0e.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66, Cache Line Size: 32 bytes<div class="im"> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-0000ffff Memory behind bridge: f5e00000-fbffffff Prefetchable memory behind bridge: d5d00000-f5dfffff </div> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-<div class="im"> Capabilities: [40] Power Management version 2 </div> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-<div dir="ltr"> ) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-<div class="im"> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ </div> Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) PCI/PCI-X to PCI-Express Bridge, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <16us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- 00: b5 10 12 81 17 01 30 02 aa 00 04 06 08 42 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 00 f0 f0 00 00 20: e0 f5 f0 fb d0 d5 d0 f5 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 0b 00 40: 01 50 02 5a 00 00 00 00 10 28 0e 00 00 00 00 00 50: 05 60 80 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 10 00 81 00 00 00 00 00 00 20 00 00 11 4c 02 00 70: 00 00 11 00 80 0c 00 00 00 00 40 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 33 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.0 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: ULi Electronics Inc. ASRock 939Dual-SATA2 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 9 Region 0: Memory at ffbeb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci-pci 00: b9 10 37 52 17 01 b0 02 03 10 03 0c 08 40 80 00 10: 00 b0 be ff 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 b9 10 37 52 30: 00 00 00 00 60 00 00 00 00 00 00 00 09 02 00 50 40: 00 00 1f 00 e0 02 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 02 d8 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.1 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: ULi Electronics Inc. ASRock 939Dual-SATA2 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 11 Region 0: Memory at ffbec000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci-pci 00: b9 10 37 52 17 01 b0 02 03 10 03 0c 08 40 80 00 10: 00 c0 be ff 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 b9 10 37 52 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 03 00 50 40: 00 00 1f 00 e0 02 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 02 d8 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.2 USB controller: ULi Electronics Inc. USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: ULi Electronics Inc. ASRock 939Dual-SATA2 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 11 Region 0: Memory at ffbed000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ohci-pci 00: b9 10 37 52 17 01 b0 02 03 10 03 0c 08 40 80 00 10: 00 d0 be ff 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 b9 10 37 52 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 04 00 50 40: 00 00 1f 00 e0 02 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 02 d8 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:0f.3 USB controller: ULi Electronics Inc. USB 2.0 Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: ULi Electronics Inc. Device 5272 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at ffbefc00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=0090 Kernel driver in use: ehci-pci 00: b9 10 39 52 16 01 b0 02 01 20 03 0c 08 40 80 00 10: 00 fc be ff 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 b9 10 72 52 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 50 40: 01 02 00 ee 00 00 10 c4 00 00 00 00 00 00 00 00 50: 01 58 02 c8 00 00 00 00 0a 00 90 20 00 00 00 00 60: 20 20 7f 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00:10.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02) Subsystem: Silicon Image, Inc. Winic W-680 (Silicon Image 680 based) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at eff0 [size=8] Region 1: I/O ports at efe4 [size=4] Region 2: I/O ports at efa8 [size=8] Region 3: I/O ports at efe0 [size=4] Region 4: I/O ports at ef90 [size=16] Region 5: Memory at ffbeec00 (32-bit, non-prefetchable) [size=256] [virtual] Expansion ROM at 08000000 [disabled] [size=512K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: pata_sil680 00: 95 10 80 06 07 01 90 02 02 00 04 01 01 40 00 00 10: f1 ef 00 00 e5 ef 00 00 a9 ef 00 00 e1 ef 00 00 20: 91 ef 00 00 00 ec be ff 00 00 00 00 95 10 80 36 30: 00 00 00 00 60 00 00 00 00 00 00 00 09 01 00 00 40: 00 00 00 00 90 14 19 08 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 01 00 22 06 00 40 00 64 00 00 00 00 00 00 00 00 70: 08 00 00 00 00 70 57 07 00 00 00 00 00 00 00 00 80: 03 00 00 00 00 00 00 00 00 00 11 00 d9 7d ff 7b 90: 00 fe 00 0d ff ff ff 3b 33 00 00 19 ff 00 00 00 a0: 00 62 c1 10 c1 10 8a 32 c1 10 92 43 07 40 09 40 b0: 01 60 8a 32 8a 32 8a 32 92 43 92 43 09 40 09 40 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Jaton Corp Device 0641 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at fc80 [size=128]<div class="im"> [virtual] Expansion ROM at d5d00000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 </div> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-<div class="im"> Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ </div> Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-<div class="im"> Capabilities: [b4] Vendor Specific Information: Len=14 <?> Kernel driver in use: nouveau </div>00: de 10 41 06 07 01 10 00 a1 00 00 03 08 00 00 00 10: 00 00 00 fb 0c 00 00 e0 00 00 00 00 04 00 00 f8 20: 00 00 00 00 81 fc 00 00 00 00 00 00 13 1b 41 06 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00 40: 13 1b 41 06 00 00 00 00 00 00 00 00 00 00 00 00 50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00 60: 01 68 03 00 00 00 00 00 05 78 80 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 10 b4 01 00 e0 84 64 00 80: 10 28 00 00 01 3d 00 00 08 00 11 10 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 09 00 14 01 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00</div> </div><div class="gmail_extra"> <div class="gmail_quote">On Thu, Jul 3, 2014 at 1:58 AM, Yijing Wang <<a href="mailto:wangyijing@huawei.com" target="_blank">wangyijing@huawei.com</a>> wrote: <blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="">On 2014/7/3 11:20, Ilia Mirkin wrote: > Hello, > > A user (cc'd) reported that nouveau's enabling of MSI causes the card > to not work on his setup [1]. I think the situation is that MSI is > just not supported by the underlying motherboard, even though the > card, and probably bridge, support it just fine. It's a very old > board. The nouveau code does: </div>What is the kernel version running in your board ? <div class=""> > > pmc->use_msi = pci_enable_msi(device->pdev) == 0; </div>Driver call pci_enable_msi() and always return 0 ? <div class=""> > > Does it need to do more checking than that before trying to enable MSI > on the device? Could it be that the linux pci subsystem is missing on > inheriting MSI capabilities somewhere? </div>pci_enable_msi() will checking your device whether it supports MSI. Can you provide the detailed lspci information ? eg. lspci -vvvxxx ? <div class="HOEnZb"><div class="h5"> > > -ilia > > [1] > > 00:00.0 Host bridge [0600]: Intel Corporation 430FX - 82437FX TSC > [Triton I] [8086:122d] (rev 01) > Flags: bus master, medium devsel, latency 64 > > 00:0e.0 PCI bridge [0604]: PLX Technology, Inc. PEX8112 x1 Lane PCI > Express-to-PCI Bridge [10b5:8112] (rev aa) (prog-if 00 [Normal > decode]) > Flags: bus master, 66MHz, medium devsel, latency 66 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-0000ffff > Memory behind bridge: f5e00000-fbffffff > Prefetchable memory behind bridge: d5d00000-f5dfffff > Capabilities: [40] Power Management version 2 > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Capabilities: [60] Express PCI/PCI-X to PCI-Express Bridge, MSI 00 > > 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96 > [GeForce 9400 GT] [10de:0641] (rev a1) (prog-if 00 [VGA controller]) > Subsystem: Jaton Corp Device [1b13:0641] > Flags: bus master, fast devsel, latency 0, IRQ 11 > Memory at fb000000 (32-bit, non-prefetchable) [size=16M] > Memory at e0000000 (64-bit, prefetchable) [size=256M] > Memory at f8000000 (64-bit, non-prefetchable) [size=32M] > I/O ports at fc80 [size=128] > [virtual] Expansion ROM at d5d00000 [disabled] [size=512K] > Capabilities: [60] Power Management version 3 > Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ > Capabilities: [78] Express Endpoint, MSI 00 > Capabilities: [b4] Vendor Specific Information: Len=14 <?> > Kernel driver in use: nouveau </div></div>> -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to <a href="mailto:majordomo@vger.kernel.org">majordomo@vger.kernel.org</a> > More majordomo info at <a href="http://vger.kernel.org/majordomo-info.html" target="_blank">http://vger.kernel.org/majordomo-info.html</a> > > -- Thanks! Yijing </blockquote></div> </div>