<html>
<head>
<base href="https://bugs.freedesktop.org/" />
</head>
<body><table border="1" cellspacing="0" cellpadding="8">
<tr>
<th>Priority</th>
<td>medium
</td>
</tr>
<tr>
<th>Bug ID</th>
<td><a class="bz_bug_link
bz_status_NEW "
title="NEW --- - K8M890CE/K8N890CE [Chrome 9] [1106:3230] not detected"
href="https://bugs.freedesktop.org/show_bug.cgi?id=70162">70162</a>
</td>
</tr>
<tr>
<th>Assignee</th>
<td>openchrome-devel@lists.freedesktop.org
</td>
</tr>
<tr>
<th>Summary</th>
<td>K8M890CE/K8N890CE [Chrome 9] [1106:3230] not detected
</td>
</tr>
<tr>
<th>Severity</th>
<td>normal
</td>
</tr>
<tr>
<th>Classification</th>
<td>Unclassified
</td>
</tr>
<tr>
<th>OS</th>
<td>All
</td>
</tr>
<tr>
<th>Reporter</th>
<td>paulepanter@users.sourceforge.net
</td>
</tr>
<tr>
<th>Hardware</th>
<td>Other
</td>
</tr>
<tr>
<th>Status</th>
<td>NEW
</td>
</tr>
<tr>
<th>Version</th>
<td>XOrg CVS
</td>
</tr>
<tr>
<th>Component</th>
<td>DRM/Via
</td>
</tr>
<tr>
<th>Product</th>
<td>DRI
</td>
</tr></table>
<p>
<div>
<pre>Using an ASUS M2V-MX SE board with K8M890CE/K8N890CE [Chrome 9], starting
Debian Wheezy with Linux 3.10 from Debian Backports, an SSD and sytemd 44-11,
the system hangs after reaching the login console and the text on the screen
suddenly is garbled and nothing is shown on serial console and I am not able to
enter anything.
With a slower system (hard drive, SysV init sytem, Debian Sid/unstable, Linux
3.10-3-686-pae) the system freezes earlier but with the same kind of text
corruption.
Looking through the Linux kernel output and comparing it with the
Troubleshooting Wiki page [1], it might be during loading the DRM(?) module.
Please find everything pasted below.
[1] <a href="http://www.freedesktop.org/wiki/Openchrome/Troubleshooting/">http://www.freedesktop.org/wiki/Openchrome/Troubleshooting/</a>
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge
[1106:0336]
Subsystem: VIA Technologies, Inc. K8M890CE Host Bridge [1106:0336]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Region 0: Memory at <ignored> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-amd64
00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge
[1106:1336]
Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge
[1106:2336]
Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge
[1106:3336]
Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge
[1106:4336]
Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
00:00.5 PIC [0800]: VIA Technologies, Inc. K8M890CE I/O APIC Interrupt
Controller [1106:5336] (prog-if 20 [IO(X)-APIC])
Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8M890CE Host Bridge
[1106:7336]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge
[K8T800/K8T890 South] [1106:b188] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fa000000-fbefffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge
Controller [1106:a238] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: VIA Technologies, Inc. K8T890 PCI to PCI Bridge
Controller [1106:c238] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 80400000-805fffff
Prefetchable memory behind bridge: 0000000080600000-00000000807fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. Device [1106:5372]
(prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: I/O ports at e000 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07)
(prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev b0) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at d480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev b0) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev b0) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at d880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev b0) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at dc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
90) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237S PCI to ISA Bridge
[1106:3372]
Subsystem: ASUSTeK Computer Inc. Device [1043:827c]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8251 Ultra VLINK
Controller [1106:287e]
Subsystem: VIA Technologies, Inc. Device [1106:337e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 128
Capabilities: <access denied>
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II]
[1106:3065] (rev 7c)
Subsystem: ASUSTeK Computer Inc. A7V600-X Motherboard [1043:80ed]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at f9fff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
00:13.0 Host bridge [0600]: VIA Technologies, Inc. VT8237A Host Bridge
[1106:337b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
[1106:337a] (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: VIA Technologies, Inc.
K8M890CE/K8N890CE [Chrome 9] [1106:3230] (rev 11) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8297]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at fbef0000 [disabled] [size=64K]
Capabilities: <access denied>
20:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA
High Definition Audio Controller) [1106:3288] (rev 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:8290]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Loading Linux 3.10-0.bpo.2-686-pae ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10-0.bpo.2-686-pae
(<a href="mailto:debian-kernel@lists.debian.org">debian-kernel@lists.debian.org</a>) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP
Debian 3.10.5-1~bpo70+1 (2013-08-11)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e9c20-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037faffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000037fb0000-0x0000000037fbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000037fbe000-0x0000000037fdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000037fe0000-0x0000000037ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] e820: last_pfn = 0x37fb0 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at
[c00ff780]
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x375fffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[ 0.000000] RAMDISK: [mem 0x368ca000-0x3745cfff]
[ 0.000000] ACPI: RSDP 000fa8b0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 37fb0100 0005C (v01 103007 XSDT1341 20071030 MSFT
00000097)
[ 0.000000] ACPI: FACP 37fb0290 000F4 (v03 103007 FACP1341 20071030 MSFT
00000097)
[ 0.000000] ACPI: DSDT 37fb0490 0547E (v01 A0692 A0692000 00000000 INTL
20051117)
[ 0.000000] ACPI: FACS 37fbe000 00040
[ 0.000000] ACPI: APIC 37fb0390 00068 (v01 103007 APIC1341 20071030 MSFT
00000097)
[ 0.000000] ACPI: MCFG 37fb0400 0003C (v01 103007 OEMMCFG 20071030 MSFT
00000097)
[ 0.000000] ACPI: WDRT 37fb0440 00047 (v01 103007 VT-8237S 20071030 MSFT
00000097)
[ 0.000000] ACPI: OEMB 37fbe040 00075 (v01 103007 OEMB1341 20071030 MSFT
00000097)
[ 0.000000] ACPI: HPET 37fb5910 00038 (v01 103007 VT-8237S 20071030 MSFT
00000097)
[ 0.000000] ACPI: SSDT 37fb5950 000D3 (v01 A_M_I_ POWERNOW 00000001 AMD
00000001)
[ 0.000000] 5MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x379fdfff]
[ 0.000000] HighMem [mem 0x379fe000-0x37faffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009afff]
[ 0.000000] node 0: [mem 0x00100000-0x37faffff]
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009b000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000ea000
[ 0.000000] PM: Registered nosave memory: 00000000000ea000 -
0000000000100000
[ 0.000000] e820: [mem 0x38000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79dc000 s34560 r0 d22784 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 227414
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10-0.bpo.2-686-pae
root=/dev/mapper/sda2crypt ro console=ttyS0,115200n8 console=tty0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:00037fb0)
[ 0.000000] Memory: 891000k/917184k available (3085k kernel code, 25776k
reserved, 1572k data, 460k init, 5832k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd34000 - 0xfffff000 (2860 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc148d000 - 0xc1500000 ( 460 kB)
[ 0.000000] .data : 0xc130357c - 0xc148c800 (1572 kB)
[ 0.000000] .text : 0xc1000000 - 0xc130357c (3085 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1801.010 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.016000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3602.02 BogoMIPS (lpj=7204040)
[ 0.018851] pid_max: default: 32768 minimum: 301
[ 0.020059] Security Framework initialized
[ 0.024007] AppArmor: AppArmor disabled by boot time parameter
[ 0.028003] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.032028] Mount-cache hash table entries: 512
[ 0.036289] Initializing cgroup subsys memory
[ 0.040026] Initializing cgroup subsys devices
[ 0.044004] Initializing cgroup subsys freezer
[ 0.048004] Initializing cgroup subsys net_cls
[ 0.052004] Initializing cgroup subsys blkio
[ 0.056004] Initializing cgroup subsys perf_event
[ 0.060049] mce: CPU supports 5 MCE banks
[ 0.064010] LVT offset 0 assigned for vector 0xf9
[ 0.068006] process: using AMD E400 aware idle routine
[ 0.072012] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.072012] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.072012] tlb_flushall_shift: 4
[ 0.080193] ACPI: Core revision 20130328
[ 0.087173] ACPI: All ACPI Tables successfully acquired
[ 0.096116] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.100527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.143938] smpboot: CPU0: AMD Sempron(tm) Processor 3200+ (fam: 0f, model:
4f, stepping: 02)
[ 0.156000] Performance Events: AMD PMU driver.
[ 0.156004] ... version: 0
[ 0.160001] ... bit width: 48
[ 0.164001] ... generic registers: 4
[ 0.168001] ... value mask: 0000ffffffffffff
[ 0.172001] ... max period: 00007fffffffffff
[ 0.176001] ... fixed-purpose events: 0
[ 0.180001] ... event mask: 000000000000000f
[ 0.184320] Brought up 1 CPUs
[ 0.188008] smpboot: Total of 1 processors activated (3602.02 BogoMIPS)
[ 0.192085] NMI watchdog: enabled on all CPUs, permanently consumes one
hw-PMU counter.
[ 0.196426] devtmpfs: initialized
[ 0.200347] PM: Registering ACPI NVS region [mem 0x37fbe000-0x37fdffff]
(139264 bytes)
[ 0.204253] regulator-dummy: no parameters
[ 0.208091] NET: Registered protocol family 16
[ 0.212146] TOM: 0000000040000000 aka 1024M
[ 0.216068] ACPI: bus type PCI registered
[ 0.220003] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.224080] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.228003] PCI: not using MMCONFIG
[ 0.232744] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it
NX.
[ 0.236087] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.240001] PCI: Using configuration type 1 for base access
[ 0.244964] bio: create slab <bio-0> at 0
[ 0.248135] ACPI: Added _OSI(Module Device)
[ 0.252008] ACPI: Added _OSI(Processor Device)
[ 0.256002] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.260002] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.266972] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.277894] ACPI: Interpreter enabled
[ 0.280022] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20130328/hwxface-568)
[ 0.290252] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.292002] ACPI: Using IOAPIC for interrupt routing
[ 0.296032] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.301744] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
[ 0.304002] PCI: Using MMCONFIG for extended config space
[ 0.308026] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.312123] ACPI: No dock devices found.
[ 0.329847] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
[ 0.332399] PCI host bridge to bus 0000:00
[ 0.336007] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 0.340004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.344003] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.348004] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.352003] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.356003] pci_bus 0000:00: root bus resource [mem 0x38000000-0xdfffffff]
[ 0.360003] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbefffff]
[ 0.368369] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.372172] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.380018] pci 0000:00:10.2: System wakeup disabled by ACPI
[ 0.384172] pci 0000:00:10.3: System wakeup disabled by ACPI
[ 0.388186] pci 0000:00:10.4: System wakeup disabled by ACPI
[ 0.392475] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.400655] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.404099] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.408085] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.416004] pci 0000:00:13.1: PCI bridge to [bus 04] (subtractive decode)
[ 0.420057] acpi PNP0A03:00: ACPI _OSC support notification failed,
disabling PCIe ASPM
[ 0.424003] acpi PNP0A03:00: Unable to request _OSC control (_OSC support
mask: 0x08)
[ 0.432396] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.440069] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.448068] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.456067] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.463318] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.468314] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.478127] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.487410] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.495191] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 20-ff])
[ 0.496296] PCI host bridge to bus 0000:20
[ 0.500006] pci_bus 0000:20: root bus resource [bus 20-ff]
[ 0.504004] pci_bus 0000:20: root bus resource [mem 0xfbf00000-0xfbffffff]
[ 0.508140] pci 0000:20:01.0: System wakeup disabled by ACPI
[ 0.512088] acpi PNP0A08:00: ACPI _OSC support notification failed,
disabling PCIe ASPM
[ 0.516003] acpi PNP0A08:00: Unable to request _OSC control (_OSC support
mask: 0x08)
[ 0.520495] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.524007] vgaarb: loaded
[ 0.526764] vgaarb: bridge control possible 0000:01:00.0
[ 0.528083] PCI: Using ACPI for IRQ routing
[ 0.532276] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.536009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.541120] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.546095] Switching to clocksource hpet
[ 0.550108] pnp: PnP ACPI init
[ 0.553270] ACPI: bus type PNP registered
[ 0.558950] system 00:04: [io 0x03e0-0x03e7] has been reserved
[ 0.564951] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.570931] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.576910] system 00:04: [io 0x0400-0x041f] has been reserved
[ 0.582893] system 00:04: [mem 0xfecc0000-0xfecc0fff] could not be reserved
[ 0.589911] system 00:04: [mem 0xfed02000-0xfed02fff] has been reserved
[ 0.597143] system 00:08: [io 0x0c00-0x0c0f] has been reserved
[ 0.603140] system 00:08: [io 0x0d00-0x0d0f] has been reserved
[ 0.609118] system 00:08: [io 0x0a20-0x0a2f] has been reserved
[ 0.615096] system 00:08: [io 0x0a30-0x0a3f] has been reserved
[ 0.622219] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.629255] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.635925] system 00:0a: [mem 0x38000000-0x3fffffff] has been reserved
[ 0.642696] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.649765] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.656794] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.663815] system 00:0c: [mem 0x00100000-0x37ffffff] could not be reserved
[ 0.670835] system 00:0c: [mem 0xfc000000-0xffffffff] could not be reserved
[ 0.678083] pnp: PnP ACPI: found 13 devices
[ 0.682326] ACPI: bus type PNP unregistered
[ 0.686565] PnPBIOS: Disabled by ACPI PNP
[ 0.727509] pci 0000:00:02.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
[ 0.734445] pci 0000:00:02.0: BAR 15: assigned [mem 0x40200000-0x403fffff
64bit pref]
[ 0.742347] pci 0000:00:03.0: BAR 14: assigned [mem 0x40400000-0x405fffff]
[ 0.749279] pci 0000:00:03.0: BAR 15: assigned [mem 0x40600000-0x407fffff
64bit pref]
[ 0.757176] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.763416] pci 0000:00:03.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.769656] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.774686] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff]
[ 0.781530] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff
pref]
[ 0.788820] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.793843] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 0.800000] pci 0000:00:02.0: bridge window [mem 0x40000000-0x401fffff]
[ 0.806847] pci 0000:00:02.0: bridge window [mem 0x40200000-0x403fffff
64bit pref]
[ 0.814657] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.819680] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.825836] pci 0000:00:03.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.832683] pci 0000:00:03.0: bridge window [mem 0x40600000-0x407fffff
64bit pref]
[ 0.840494] pci 0000:00:13.1: PCI bridge to [bus 04]
[ 0.845537] pci 0000:00:02.0: enabling device (0104 -> 0107)
[ 0.851368] pci 0000:00:03.0: enabling device (0104 -> 0107)
[ 0.857280] NET: Registered protocol family 2
[ 0.861911] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.869070] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.875617] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.882103] TCP: reno registered
[ 0.885396] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.891385] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.897905] NET: Registered protocol family 1
[ 0.902409] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.908319] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.914127] pci 0000:00:02.0: MSI quirk detected; subordinate MSI disabled
[ 0.921808] Unpacking initramfs...
[ 1.342682] Freeing initrd memory: 11852k freed
[ 1.358361] audit: initializing netlink socket (disabled)
[ 1.363858] type=2000 audit(1380961638.360:1): initialized
[ 1.389848] bounce pool size: 64 pages
[ 1.394087] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.400764] VFS: Disk quotas dquot_6.5.2
[ 1.404798] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.411515] msgmni has been set to 1751
[ 1.415682] alg: No test for stdrng (krng)
[ 1.419901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
252)
[ 1.427410] io scheduler noop registered
[ 1.431403] io scheduler deadline registered
[ 1.435748] io scheduler cfq registered (default)
[ 1.440807] ioapic: probe of 0000:00:00.5 failed with error -22
[ 1.446810] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.452479] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.459305] GHES: HEST is not enabled!
[ 1.463131] isapnp: Scanning for PnP cards...
[ 1.821497] isapnp: No Plug & Play device found
[ 1.826175] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.852910] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.859245] Linux agpgart interface v0.103
[ 1.863545] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0336]
[ 1.874167] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xc8000000
[ 1.881278] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.888574] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.893612] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.898865] mousedev: PS/2 mouse device common for all mice
[ 1.904593] rtc_cmos 00:07: RTC can wake from S4
[ 1.909492] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.915687] rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram,
hpet irqs
[ 1.923356] cpuidle: using governor ladder
[ 1.927515] cpuidle: using governor menu
[ 1.931536] drop_monitor: Initializing network drop monitor service
[ 1.938068] TCP: cubic registered
[ 1.941462] NET: Registered protocol family 10
[ 1.946200] mip6: Mobile IPv6
[ 1.949242] NET: Registered protocol family 17
[ 1.953954] Using IPI No-Shortcut mode
[ 1.957896] registered taskstats version 1
[ 1.962637] rtc_cmos 00:07: setting system clock to 2013-10-05 08:27:20 UTC
(1380961640)
[ 1.971064] Freeing unused kernel memory: 460k freed
[ 1.976566] Write protecting the kernel text: 3088k
[ 1.981556] Write protecting the kernel read-only data: 1240k
[ 1.987359] NX-protecting the kernel data: 3056k
[ 2.064272] udevd[54]: starting version 175
[ 2.171835] SCSI subsystem initialized
[ 2.183705] ACPI: bus type ATA registered
[ 2.248239] ACPI: bus type USB registered
[ 2.275987] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 2.292718] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
[ 2.304579] usbcore: registered new interface driver usbfs
[ 2.315893] scsi0 : sata_via
[ 2.330789] scsi1 : sata_via
[ 2.336212] usbcore: registered new interface driver hub
[ 2.347337] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq
21
[ 2.354568] ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq
21
[ 2.372203] usbcore: registered new device driver usb
[ 2.394652] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.401895] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.410142] scsi2 : pata_via
[ 2.415492] scsi3 : pata_via
[ 2.425576] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 2.432634] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 2.441360] ehci-pci: EHCI PCI platform driver
[ 2.446724] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0x1d000,
00:1e:8c:b9:4b:2a, IRQ 23
[ 2.455956] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status
0x7949 advertising 0de1 Link 0000
[ 2.466299] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.473131] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[ 2.480956] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000d480
[ 2.486873] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.493725] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.504883] usb usb1: Product: UHCI Host Controller
[ 2.509821] usb usb1: Manufacturer: Linux 3.10-0.bpo.2-686-pae uhci_hcd
[ 2.516494] usb usb1: SerialNumber: 0000:00:10.0
[ 2.521517] hub 1-0:1.0: USB hub found
[ 2.525364] hub 1-0:1.0: 2 ports detected
[ 2.529832] ehci-pci 0000:00:10.4: EHCI Host Controller
[ 2.535251] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus
number 2
[ 2.542735] ehci-pci 0000:00:10.4: debug port 1
[ 2.547365] ehci-pci 0000:00:10.4: irq 21, io mem 0xf9fffc00
[ 2.564028] ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[ 2.570331] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 2.576177] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.583026] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.590313] usb usb2: Product: EHCI Host Controller
[ 2.595257] usb usb2: Manufacturer: Linux 3.10-0.bpo.2-686-pae ehci_hcd
[ 2.601927] usb usb2: SerialNumber: 0000:00:10.4
[ 2.607312] hub 2-0:1.0: USB hub found
[ 2.611176] hub 2-0:1.0: 8 ports detected
[ 2.636278] hub 1-0:1.0: USB hub found
[ 2.640128] hub 1-0:1.0: 2 ports detected
[ 2.644562] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.656092] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 3
[ 2.664342] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000d800
[ 2.670277] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.677150] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.684451] usb usb3: Product: UHCI Host Controller
[ 2.689397] usb usb3: Manufacturer: Linux 3.10-0.bpo.2-686-pae uhci_hcd
[ 2.696070] usb usb3: SerialNumber: 0000:00:10.1
[ 2.701353] hub 3-0:1.0: USB hub found
[ 2.705201] hub 3-0:1.0: 2 ports detected
[ 2.709702] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.715080] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 4
[ 2.722604] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d880
[ 2.728636] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.735485] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.742773] usb usb4: Product: UHCI Host Controller
[ 2.747713] usb usb4: Manufacturer: Linux 3.10-0.bpo.2-686-pae uhci_hcd
[ 2.754385] usb usb4: SerialNumber: 0000:00:10.2
[ 2.759369] ata1.00: ATA-8: SAMSUNG 470 Series SSD, AXM09B1Q, max UDMA/133
[ 2.766305] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.773441] hub 4-0:1.0: USB hub found
[ 2.777290] hub 4-0:1.0: 2 ports detected
[ 2.781606] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.787092] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 5
[ 2.794863] ata1.00: configured for UDMA/133
[ 2.799355] scsi 0:0:0:0: Direct-Access ATA SAMSUNG 470 Seri AXM0
PQ: 0 ANSI: 5
[ 2.807559] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000dc00
[ 2.813955] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.820844] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.828134] usb usb5: Product: UHCI Host Controller
[ 2.833073] usb usb5: Manufacturer: Linux 3.10-0.bpo.2-686-pae uhci_hcd
[ 2.839747] usb usb5: SerialNumber: 0000:00:10.3
[ 2.844816] hub 5-0:1.0: USB hub found
[ 2.848660] hub 5-0:1.0: 2 ports detected
[ 3.016024] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 3.199801] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0
GB/59.6 GiB)
[ 3.208102] sd 0:0:0:0: [sda] Write Protect is off
[ 3.212996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.224432] sda: sda1 sda2
[ 3.227907] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.235857] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.297231] device-mapper: uevent: version 1.0.3
[ 3.302721] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised:
<a href="mailto:dm-devel@redhat.com">dm-devel@redhat.com</a>
[ 7.368540] bio: create slab <bio-1> at 1
[ 7.534039] bio: create slab <bio-1> at 1
[ 7.625339] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
[ 7.632294] EXT4-fs (dm-0): write access will be enabled during recovery
[ 7.644541] EXT4-fs (dm-0): recovery complete
[ 7.649323] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 8.441222] udevd[297]: starting version 175
[ 8.796212] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,discard
[ 8.833021] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 8.930877] ACPI: Sleep Button [SLPB]
[ 8.956570] parport_pc 00:03: reported by Plug and Play ACPI
[ 8.971608] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 8.981060] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.088124] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.134202] k8temp 0000:00:18.3: Temperature readouts might be wrong - check
erratum #141
[ 9.150368] ACPI: Power Button [PWRB]
[ 9.204230] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 9.257709] microcode: AMD CPU family 0xf not supported
[ 9.297722] ACPI: Power Button [PWRF]
[ 9.331033] snd_hda_intel 0000:20:01.0: PCI: Disallowing DAC for device
[ 9.343875] powernow-k8: fid 0xa (1800 MHz), vid 0x6
[ 9.348940] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 9.380621] powernow-k8: Found 1 AMD Sempron(tm) Processor 3200+ (1 cpu
cores) (version 2.20.00)
[ 9.530206] input: HDA VIA VT82xx Line Out as
/devices/pci0000:20/0000:20:01.0/sound/card0/input5
[ 9.593744] input: HDA VIA VT82xx Line as
/devices/pci0000:20/0000:20:01.0/sound/card0/input6
[ 9.613041] input: HDA VIA VT82xx Rear Mic as
/devices/pci0000:20/0000:20:01.0/sound/card0/input7
[ 9.852850] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
discard
[ 11.177950] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439028
[ 11.216246] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.220017] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x439020
[ 11.581733] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x23902c
[ 11.585498] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x23902c
[ 11.585498] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x23902c
[ 11.585498] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x23902c
[ 11.611709] hda-intel 0000:20:01.0: spurious response 0x0:0x0, last
cmd=0x43902c
[ 14.683170] postgres (1058): /proc/1058/oom_adj is deprecated, please use
/proc/1058/oom_score_adj instead.</pre>
</div>
</p>
<hr>
<span>You are receiving this mail because:</span>
<ul>
<li>You are the assignee for the bug.</li>
</ul>
</body>
</html>