From yashavanth.hsn at gmail.com Mon Dec 15 06:45:06 2014 From: yashavanth.hsn at gmail.com (yash cp) Date: Mon, 15 Dec 2014 15:45:06 +0100 Subject: Messages shown even after plymouth stopped. Message-ID: Hello Team, I have problem with plymouth in my custom build system. Basically, when vga=normal set in kernel command line (disable frame buffer support). Plymouth starts the text theme by default, with the below command options (in initrd) . plymouthd --pid-file --attach-to-session /run/plymouth/pid plymouth show-splash The problem is : After the plymouth gets stopped, terminal /dev/tty1 is shown and some boot messages continue to appear even after login screen is shown. I have checked that no bootlog daemon runs in my setup. In my configure options, I used --with-boot-tty=/dev/tty1 \ --with-shutdown-tty=/dev/tty1 \ and in my /etc/inittab mingetty is given with options as , 1:123:respawn:/sbin/mingetty --no-hostname tty1 2:123:respawn:/sbin/mingetty --no-hostname tty2 3:123:respawn:/sbin/mingetty --no-hostname tty3 4:123:respawn:/sbin/mingetty --no-hostname tty4 Unfortunately, enabling debugging in plymouth does not work in my setup :(. When I disable the plymouth, then issue is gone. Best Regards, Yash -------------- next part -------------- An HTML attachment was scrubbed... URL: