[ 0.000000] Linux version 2.6.22-14-generic (buildd@king) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 02:46:46 UTC 2008 (Ubuntu 2.6.22-14.52-generic) [ 0.000000] Command line: root=/dev/sdb3 ro quiet splash irqpoll [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003e6b0000 (usable) [ 0.000000] BIOS-e820: 000000003e6b0000 - 000000003e6cd000 (ACPI data) [ 0.000000] BIOS-e820: 000000003e6cd000 - 000000003e700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003e700000 - 000000003f000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 255664) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F68D0 checksum 0 [ 0.000000] ACPI: RSDP 000F68D0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 3E6BC8FD, 0094 (r1 LENOVO TP-7L 1210 LTP 0) [ 0.000000] ACPI: FACP 3E6BCA00, 00F4 (r3 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 3E6BCE0C, FD64 (r1 LENOVO TP-7L 1210 MSFT 3000000) [ 0.000000] ACPI: FACS 3E6E5000, 0040 [ 0.000000] ACPI: SSDT 3E6BCBB4, 0258 (r1 LENOVO TP-7L 1210 MSFT 3000000) [ 0.000000] ACPI: ECDT 3E6CCB70, 0052 (r1 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI: TCPA 3E6CCBC2, 0032 (r2 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI: APIC 3E6CCBF4, 0068 (r1 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI: MCFG 3E6CCC5C, 003C (r1 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI: HPET 3E6CCC98, 0038 (r1 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI: SLIC 3E6CCDF0, 0176 (r1 LENOVO TP-7L 1210 LTP 0) [ 0.000000] ACPI: BOOT 3E6CCF66, 0028 (r1 LENOVO TP-7L 1210 LTP 1) [ 0.000000] ACPI: ASF! 3E6CCF8E, 0072 (r16 LENOVO TP-7L 1210 PTL 1) [ 0.000000] ACPI: SSDT 3E6E2CAA, 061E (r1 LENOVO TP-7L 1210 INTL 20050513) [ 0.000000] ACPI: SSDT 3E6E32C8, 025F (r1 LENOVO TP-7L 1210 INTL 20050513) [ 0.000000] ACPI: SSDT 3E6E3527, 04F7 (r1 LENOVO TP-7L 1210 INTL 20050513) [ 0.000000] ACPI: SSDT 3E6E3A1E, 01D8 (r1 LENOVO TP-7L 1210 INTL 20050513) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003e6b0000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 255664) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003e6b0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 255664 [ 0.000000] On node 0 totalpages: 255565 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1126 pages reserved [ 0.000000] DMA zone: 2815 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3439 pages used for memmap [ 0.000000] DMA32 zone: 248129 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f000000:b1000000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 250944 [ 0.000000] Kernel command line: root=/dev/sdb3 ro quiet splash irqpoll [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 33.037652] time.c: Detected 1728.998 MHz processor. [ 33.039421] Console: colour VGA+ 80x25 [ 33.039444] Checking aperture... [ 33.039463] Calgary: detecting Calgary via BIOS EBDA area [ 33.039466] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 33.053607] Memory: 996400k/1022656k available (2274k kernel code, 25860k reserved, 1185k data, 296k init) [ 33.053662] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 33.131812] Calibrating delay using timer specific routine.. 3479.21 BogoMIPS (lpj=6958438) [ 33.131853] Security Framework v1.0.0 initialized [ 33.131862] SELinux: Disabled at boot. [ 33.131992] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 33.132827] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 33.133247] Mount-cache hash table entries: 256 [ 33.133425] CPU: L1 I cache: 32K, L1 D cache: 32K [ 33.133430] CPU: L2 cache: 1024K [ 33.133433] CPU 0/0 -> Node 0 [ 33.133435] using mwait in idle threads. [ 33.133443] CPU0: Thermal monitoring enabled (TM1) [ 33.133456] SMP alternatives: switching to UP code [ 33.133780] Early unpacking initramfs... done [ 33.519929] ACPI: Core revision 20070126 [ 33.520017] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 33.583172] Using local APIC timer interrupts. [ 33.640988] result 8312481 [ 33.640990] Detected 8.312 MHz APIC timer. [ 33.643609] Brought up 1 CPUs [ 33.643817] NET: Registered protocol family 16 [ 33.643905] ACPI: bus type pci registered [ 33.643915] PCI: Using configuration type 1 [ 33.645335] ACPI: EC: Found ECDT [ 33.726979] ACPI: Interpreter enabled [ 33.726983] ACPI: (supports S0 S3 S4 S5) [ 33.727003] ACPI: Using IOAPIC for interrupt routing [ 33.737114] ACPI: EC: GPE=0x12, ports=0x66, 0x62 [ 33.737168] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 33.737177] PCI: Probing PCI hardware (bus 00) [ 33.741703] PCI: Transparent bridge - 0000:00:1e.0 [ 33.742066] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 33.742305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 33.742447] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 33.742588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 33.742729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 33.742871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 33.743014] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 33.746935] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 33.747174] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 33.747410] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 33.747717] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 33.747952] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 33.748186] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 33.748420] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 33.748654] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 33.749047] ACPI: Power Resource [PUBS] (on) [ 33.749066] Linux Plug and Play Support v0.97 (c) Adam Belay [ 33.749076] pnp: PnP ACPI init [ 33.749092] ACPI: bus type pnp registered [ 33.754229] pnp: PnP ACPI: found 11 devices [ 33.754232] ACPI: ACPI bus type pnp unregistered [ 33.754293] PCI: Using ACPI for IRQ routing [ 33.754296] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 33.754529] NET: Registered protocol family 8 [ 33.754531] NET: Registered protocol family 20 [ 33.754545] PCI-GART: No AMD northbridge found. [ 33.754552] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 33.754555] hpet0: 3 64-bit timers, 14318180 Hz [ 33.755665] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 33.755668] pnp: 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 33.755671] pnp: 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 33.755673] pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 33.755680] pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 33.755683] pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 33.755686] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 33.755689] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 33.756014] PCI: Bridge: 0000:00:1c.0 [ 33.756020] IO window: 2000-2fff [ 33.756033] MEM window: fc000000-fdffffff [ 33.756043] PREFETCH window: f8000000-f80fffff [ 33.756056] PCI: Bridge: 0000:00:1c.1 [ 33.756061] IO window: 3000-3fff [ 33.756074] MEM window: dc000000-df3fffff [ 33.756083] PREFETCH window: dfe00000-dfefffff [ 33.756094] PCI: Bridge: 0000:00:1c.2 [ 33.756099] IO window: 4000-4fff [ 33.756112] MEM window: d8000000-d9ffffff [ 33.756118] PREFETCH window: dfb00000-dfbfffff [ 33.756131] PCI: Bridge: 0000:00:1c.3 [ 33.756136] IO window: 5000-5fff [ 33.756150] MEM window: d4000000-d5ffffff [ 33.756159] PREFETCH window: df800000-df8fffff [ 33.756172] PCI: Bridge: 0000:00:1c.4 [ 33.756177] IO window: 6000-6fff [ 33.756190] MEM window: d0000000-d1ffffff [ 33.756199] PREFETCH window: df500000-df5fffff [ 33.756217] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 33.756219] IO window: 00007000-000070ff [ 33.756228] IO window: 00007400-000074ff [ 33.756238] PREFETCH window: f4000000-f7ffffff [ 33.756248] MEM window: 40000000-43ffffff [ 33.756258] PCI: Bridge: 0000:00:1e.0 [ 33.756263] IO window: 7000-afff [ 33.756276] MEM window: f8300000-fbffffff [ 33.756285] PREFETCH window: f4000000-f7ffffff [ 33.756351] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 33.756362] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 33.756414] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 33.756422] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 33.756479] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 33.756487] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 33.756544] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 33.756553] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 33.756606] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20 [ 33.756617] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 33.756642] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 33.756655] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 33.756689] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 33.756698] PCI: Setting latency timer of device 0000:15:00.0 to 64 [ 33.756712] NET: Registered protocol family 2 [ 33.759509] Time: hpet clocksource has been installed. [ 33.795572] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 33.795916] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 33.798502] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 33.799456] TCP: Hash tables configured (established 131072 bind 65536) [ 33.799460] TCP reno registered [ 33.807695] checking if image is initramfs... it is [ 34.562924] Freeing initrd memory: 7200k freed [ 34.569476] Simple Boot Flag at 0x35 set to 0x1 [ 34.569904] audit: initializing netlink socket (disabled) [ 34.569918] audit(1235243441.400:1): initialized [ 34.572034] VFS: Disk quotas dquot_6.5.1 [ 34.572088] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 34.572187] io scheduler noop registered [ 34.572190] io scheduler anticipatory registered [ 34.572192] io scheduler deadline registered [ 34.572289] io scheduler cfq registered (default) [ 34.572306] Boot video device is 0000:00:02.0 [ 34.573303] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 34.573450] assign_interrupt_mode Found MSI capability [ 34.573453] Allocate Port Service[0000:00:1c.0:pcie00] [ 34.573489] Allocate Port Service[0000:00:1c.0:pcie02] [ 34.573693] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 34.573833] assign_interrupt_mode Found MSI capability [ 34.573836] Allocate Port Service[0000:00:1c.1:pcie00] [ 34.573867] Allocate Port Service[0000:00:1c.1:pcie02] [ 34.574065] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 34.574203] assign_interrupt_mode Found MSI capability [ 34.574206] Allocate Port Service[0000:00:1c.2:pcie00] [ 34.574237] Allocate Port Service[0000:00:1c.2:pcie02] [ 34.574436] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 34.574585] assign_interrupt_mode Found MSI capability [ 34.574587] Allocate Port Service[0000:00:1c.3:pcie00] [ 34.574616] Allocate Port Service[0000:00:1c.3:pcie02] [ 34.574813] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 34.574959] assign_interrupt_mode Found MSI capability [ 34.574961] Allocate Port Service[0000:00:1c.4:pcie00] [ 34.574990] Allocate Port Service[0000:00:1c.4:pcie02] [ 34.600445] Real Time Clock Driver v1.12ac [ 34.600546] hpet_resources: 0xfed00000 is busy [ 34.600591] Linux agpgart interface v0.102 (c) Dave Jones [ 34.600594] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 34.601784] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 34.602000] input: Macintosh mouse button emulation as /class/input/input0 [ 34.602074] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 34.611518] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 34.611525] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 34.611729] mice: PS/2 mouse device common for all mice [ 34.611864] TCP cubic registered [ 34.611934] NET: Registered protocol family 1 [ 34.612173] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 34.612181] Freeing unused kernel memory: 296k freed [ 34.671251] input: AT Translated Set 2 keyboard as /class/input/input1 [ 35.777391] AppArmor: AppArmor initialized<5>audit(1235243442.608:2): type=1505 info="AppArmor initialized" pid=1182 [ 35.782950] fuse init (API version 7.8) [ 35.787141] Failure registering capabilities with primary security module. [ 35.798738] Monitor-Mwait will be used to enter C-1 state [ 35.798742] Monitor-Mwait will be used to enter C-2 state [ 35.798744] Monitor-Mwait will be used to enter C-3 state [ 35.798748] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 35.798752] ACPI: Processor [CPU0] (supports 8 throttling states) [ 35.798766] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 35.800619] ACPI: Thermal Zone [THM0] (48 C) [ 35.802297] ACPI: Thermal Zone [THM1] (49 C) [ 36.310176] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 36.310181] Copyright (c) 1999-2006 Intel Corporation. [ 36.310237] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 36.310257] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 36.330556] usbcore: registered new interface driver usbfs [ 36.330581] usbcore: registered new interface driver hub [ 36.330604] usbcore: registered new device driver usb [ 36.331313] USB Universal Host Controller Interface driver v3.0 [ 36.350634] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1c:25:18:c8:1b [ 36.484516] SCSI subsystem initialized [ 36.488943] libata version 2.21 loaded. [ 36.504992] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 36.505024] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 36.505040] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 36.505046] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 36.505222] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 36.505272] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 36.505396] usb usb1: configuration #1 chosen from 1 choice [ 36.505419] hub 1-0:1.0: USB hub found [ 36.505424] hub 1-0:1.0: 2 ports detected [ 36.606546] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 36.606563] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 36.606569] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 36.606590] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 36.606640] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 36.606740] usb usb2: configuration #1 chosen from 1 choice [ 36.606762] hub 2-0:1.0: USB hub found [ 36.606768] hub 2-0:1.0: 2 ports detected [ 36.632601] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 36.632620] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 36.632626] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 36.632649] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 36.632695] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 36.632791] usb usb3: configuration #1 chosen from 1 choice [ 36.632815] hub 3-0:1.0: USB hub found [ 36.632820] hub 3-0:1.0: 2 ports detected [ 36.637715] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 36.637732] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 36.637738] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 36.637761] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 36.637806] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 36.637900] usb usb4: configuration #1 chosen from 1 choice [ 36.637928] hub 4-0:1.0: USB hub found [ 36.637934] hub 4-0:1.0: 2 ports detected [ 36.643152] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 36.643169] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 36.643175] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 36.643202] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 36.643247] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 36.643338] usb usb5: configuration #1 chosen from 1 choice [ 36.643361] hub 5-0:1.0: USB hub found [ 36.643366] hub 5-0:1.0: 2 ports detected [ 36.646286] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 36.651591] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 36.651775] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 36.651784] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 36.651843] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 36.651905] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 36.651919] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 [ 36.693236] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 36.693496] usb usb6: configuration #1 chosen from 1 choice [ 36.693523] hub 6-0:1.0: USB hub found [ 36.693531] hub 6-0:1.0: 4 ports detected [ 36.716827] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 36.716994] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 36.717004] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 36.717055] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 36.717117] ehci_hcd 0000:00:1d.7: debug port 1 [ 36.717130] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 36.717145] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 [ 36.721554] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 36.721647] usb usb7: configuration #1 chosen from 1 choice [ 36.721672] hub 7-0:1.0: USB hub found [ 36.721678] hub 7-0:1.0: 6 ports detected [ 36.728002] ahci 0000:00:1f.2: version 2.2 [ 36.728055] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 36.728252] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match [ 36.757596] usb 2-1: device not accepting address 2, error -71 [ 36.773862] usb 6-3: new high speed USB device using ehci_hcd and address 2 [ 36.801412] usb 6-3: configuration #1 chosen from 1 choice [ 36.822057] usb 7-5: new high speed USB device using ehci_hcd and address 2 [ 36.830078] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode [ 36.830082] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 36.830092] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 36.830263] scsi0 : ahci [ 36.830326] ata1: SATA max UDMA/133 cmd 0xffffc20000602100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 36.857840] usb 7-5: configuration #1 chosen from 1 choice [ 36.875411] usbcore: registered new interface driver libusual [ 36.880539] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 36.880545] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 36.883199] Initializing USB Mass Storage driver... [ 36.883267] scsi1 : SCSI emulation for USB Mass Storage devices [ 36.883327] usbcore: registered new interface driver usb-storage [ 36.883329] USB Mass Storage support registered. [ 36.883425] usb-storage: device found at 2 [ 36.883427] usb-storage: waiting for device to settle before scanning [ 37.142244] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 37.148883] ata1.00: ATA-8: SAMSUNG HM500LI, 2TF00_00, max UDMA7 [ 37.148886] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 37.157251] ata1.00: configured for UDMA/133 [ 37.157364] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500LI 2TF0 PQ: 0 ANSI: 5 [ 37.158344] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 37.158358] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 37.212238] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 37.216630] ata_piix 0000:00:1f.1: version 2.11 [ 37.216656] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 37.216702] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 37.216777] scsi2 : ata_piix [ 37.216832] scsi3 : ata_piix [ 37.217346] ata2: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011c00 irq 14 [ 37.217350] ata3: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011c08 irq 15 [ 37.227331] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 37.227345] sd 0:0:0:0: [sda] Write Protect is off [ 37.227347] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 37.227360] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.227418] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 37.227426] sd 0:0:0:0: [sda] Write Protect is off [ 37.227428] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 37.227440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 37.227445] sda:<6>ata2.00: ATAPI: MATSHITADVD-RAM UJ-850, RB11, max UDMA/33 [ 37.706405] ata2.00: configured for UDMA/33 [ 37.706452] ata3: port disabled. ignoring. [ 37.708136] sda1 sda2 sda3 [ 37.708397] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850 RB11 PQ: 0 ANSI: 5 [ 37.714852] sd 0:0:0:0: [sda] Attached SCSI disk [ 37.718477] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 37.718497] scsi 2:0:0:0: Attached scsi generic sg1 type 5 [ 37.752648] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 37.752653] Uniform CD-ROM driver Revision: 3.20 [ 37.752862] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 37.966138] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c200034c85e] [ 38.065780] usb-storage: device scan complete [ 38.067283] scsi 1:0:0:0: Direct-Access WDC WD10 EACS-00D6B1 PQ: 0 ANSI: 2 [ 38.068887] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 38.070179] sd 1:0:0:0: [sdb] Write Protect is off [ 38.070181] sd 1:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 38.070183] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 38.071161] sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) [ 38.072465] sd 1:0:0:0: [sdb] Write Protect is off [ 38.072467] sd 1:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 38.072469] sd 1:0:0:0: [sdb] Assuming drive cache: write through [ 38.072472] sdb: sdb1 sdb2 sdb3 [ 40.059191] sd 1:0:0:0: [sdb] Attached SCSI disk [ 40.059231] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 40.244108] kjournald starting. Commit interval 5 seconds [ 40.244121] EXT3-fs: mounted filesystem with ordered data mode. [ 46.711889] agpgart: Detected an Intel 965GM Chipset. [ 46.712181] agpgart: Detected 7676K stolen memory. [ 46.726192] agpgart: AGP aperture is 256M @ 0xe0000000 [ 47.413042] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 47.436864] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 47.536794] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] [ 47.664749] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16 [ 47.664756] Socket status: 30000006 [ 47.664760] pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff [ 47.664763] pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff [ 47.664766] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 47.808817] input: PC Speaker as /class/input/input2 [ 48.132181] ieee80211_crypt: registered algorithm 'NULL' [ 48.192864] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 48.192868] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 48.239937] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 48.239942] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 48.240465] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 48.240483] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 48.242956] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 48.256304] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 48.256310] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 48.300979] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 48.326496] Linux video capture interface: v2.00 [ 48.407284] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 [ 48.407484] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 48.413987] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004) [ 48.417198] usbcore: registered new interface driver uvcvideo [ 48.417203] USB Video Class driver (v0.1.0) [ 49.274842] lp: driver loaded but no devices found [ 49.332411] usbcore: registered new interface driver usbserial [ 49.334066] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 49.335462] usbcore: registered new interface driver usbserial_generic [ 49.335468] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 49.340232] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS [ 49.341481] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5 [ 49.342885] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0 [ 49.344131] usbcore: registered new interface driver visor [ 49.344136] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver [ 49.401532] Adding 1959920k swap on /dev/sdb2. Priority:-1 extents:1 across:1959920k [ 49.428433] ACPI: AC Adapter [AC] (on-line) [ 49.795649] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 50.172006] EXT3 FS on sdb3, internal journal [ 50.308029] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 50.887733] audit(1235243473.564:3): type=1505 operation="profile_load" info="failed to unpack profile" name="/usr/lib/cups/backend/cups-pdf" pid=4634 [ 50.937497] audit(1235243473.616:4): type=1505 operation="profile_load" info="failed to unpack profile" name="/usr/sbin/mysqld" pid=4638 [ 51.015320] ip_tables: (C) 2000-2006 Netfilter Core Team [ 52.121643] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 52.124771] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 52.152891] ACPI: ACPI Dock Station Driver [ 52.175649] ACPI: Battery Slot [BAT0] (battery present) [ 52.233774] input: Power Button (FF) as /class/input/input4 [ 52.238241] ACPI: Power Button (FF) [PWRF] [ 52.269413] input: Lid Switch as /class/input/input5 [ 52.273465] ACPI: Lid Switch [LID] [ 52.304908] input: Sleep Button (CM) as /class/input/input6 [ 52.308756] ACPI: Sleep Button (CM) [SLPB] [ 52.322841] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 52.322849] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 52.322999] ACPI: Error installing bay notify handler [ 52.323004] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 52.538885] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 52.681232] input: TPPS/2 IBM TrackPoint as /class/input/input7 [ 53.418401] NET: Registered protocol family 10 [ 53.418499] lo: Disabled Privacy Extensions [ 53.810873] Failure registering capabilities with primary security module. [ 54.051732] ppdev: user-space parallel port driver [ 58.711106] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 58.711113] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 58.711115] thinkpad_acpi: ThinkPad EC firmware 7KHT22WW-1.06 [ 59.316932] QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard [ 59.318863] KQEMU installed, max_locked_mem=501948kB. [ 59.571406] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 59.571412] vboxdrv: Successfully done. [ 65.384107] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 65.437114] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 65.449242] Bluetooth: Core ver 2.11 [ 65.449350] NET: Registered protocol family 31 [ 65.449352] Bluetooth: HCI device and connection manager initialized [ 65.449356] Bluetooth: HCI socket layer initialized [ 65.464076] Bluetooth: L2CAP ver 2.8 [ 65.464080] Bluetooth: L2CAP socket layer initialized [ 65.554283] Bluetooth: RFCOMM socket layer initialized [ 65.554363] Bluetooth: RFCOMM TTY layer initialized [ 65.554365] Bluetooth: RFCOMM ver 1.8 [ 66.851405] openafs: module license 'http://www.openafs.org/dl/license10.html' taints kernel. [ 66.862645] Found system call table at 0xffffffff80445aa0 (pattern scan) [ 67.003854] Found 32-bit system call table at 0xffffffff80446db0 (pattern scan) [ 67.134305] Starting AFS cache scan...found 25 non-empty cache files (0%). [ 68.731863] afs: Lost contact with volume location server 10.1.1.8 in cell linuxbox.com [ 68.731869] afs: Lost contact with volume location server 10.1.1.8 in cell linuxbox.com [ 69.269872] afs: Lost contact with volume location server 10.1.1.12 in cell linuxbox.com [ 69.269878] afs: Lost contact with volume location server 10.1.1.12 in cell linuxbox.com [ 70.778577] [drm] Initialized drm 1.1.0 20060810 [ 70.783228] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 70.788695] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 85.665928] NET: Registered protocol family 17 [ 88.461188] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 92.605063] eth1: no IPv6 routers present [ 95.649916] ACPI: PCI interrupt for device 0000:00:19.0 disabled [ 95.921808] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 95.926987] ieee80211_crypt: unregistered algorithm 'NULL' [ 96.974922] PM: Preparing system for mem sleep [ 96.974928] Stopping tasks ... done. [ 96.975978] Suspending console(s) [ 96.996210] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 96.996317] sd 0:0:0:0: [sda] Stopping disk [ 97.865023] usb_device usbdev5.1: PM: suspend 0->2, parent usb5 already 2 [ 97.865026] usb_endpoint usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2 [ 97.865029] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2 [ 97.865031] usb_endpoint usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2 [ 97.865034] usb_device usbdev4.1: PM: suspend 0->2, parent usb4 already 2 [ 97.865037] usb_endpoint usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2 [ 97.865039] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2 [ 97.865042] usb_endpoint usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2 [ 97.865045] usb_device usbdev3.1: PM: suspend 0->2, parent usb3 already 2 [ 97.865048] usb_endpoint usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2 [ 97.865050] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2 [ 97.865052] usb_endpoint usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2 [ 97.865055] usb_device usbdev2.1: PM: suspend 0->2, parent usb2 already 2 [ 97.865058] usb_endpoint usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2 [ 97.865060] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2 [ 97.865063] usb_endpoint usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2 [ 97.865066] usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2 [ 97.865068] usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 [ 97.865071] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 [ 97.865073] usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 [ 97.895861] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 97.896751] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 97.896754] pci_set_power_state(): 0000:00:1f.1: state=3, current state=5 [ 97.896904] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 97.897947] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 97.897987] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 97.898026] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 97.898764] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 97.899240] ACPI: PCI interrupt for device 0000:00:1a.7 disabled [ 97.899658] ACPI: PCI interrupt for device 0000:00:1a.1 disabled [ 97.899697] ACPI: PCI interrupt for device 0000:00:1a.0 disabled [ 97.904934] Disabling non-boot CPUs ... [ 97.904938] PM: Entering mem sleep [ 97.905206] Extended CMOS year: 2000 [ 0.580712] Back to C! [ 0.580783] Extended CMOS year: 2000 [ 0.581259] PM: Finishing wakeup. [ 0.607492] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.607524] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007) [ 0.607593] PM: Writing back config space on device 0000:00:19.0 at offset 1 (was 100107, writing 100103) [ 0.607640] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 0.607647] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 0.607726] usb usb1: root hub lost power or was reset [ 0.607757] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 0.607767] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 0.607847] usb usb2: root hub lost power or was reset [ 0.620839] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 0.620849] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 0.636911] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102) [ 0.636956] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.636970] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 0.663539] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20002020, writing 2020) [ 0.663616] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.663740] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.663788] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20004040, writing 4040) [ 0.663863] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.663916] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20005050, writing 5050) [ 0.663992] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.664040] PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 20006060, writing 6060) [ 0.664116] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.664127] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.664137] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 0.664243] usb usb3: root hub lost power or was reset [ 0.664267] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 0.664277] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 0.664383] usb usb4: root hub lost power or was reset [ 0.664408] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.664418] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 0.664523] usb usb5: root hub lost power or was reset [ 0.665011] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 0.665021] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 0.665192] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) [ 0.665217] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.665327] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880005) [ 0.665350] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 0.665360] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 0.665721] ata3: port disabled. ignoring. [ 0.667511] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.667522] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 0.686717] ata2.00: configured for UDMA/33 [ 0.695803] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100106, writing 100102) [ 0.696521] PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing f8301000) [ 0.696531] PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) [ 0.696546] PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) [ 0.749970] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.419599] usb_endpoint usbdev7.2_ep00: PM: resume from 0, parent 7-5 still 2 [ 1.419603] uvcvideo 7-5:1.0: PM: resume from 2, parent 7-5 still 2 [ 1.419605] usb_endpoint usbdev7.2_ep83: PM: resume from 0, parent 7-5:1.0 still 2 [ 1.419608] uvcvideo 7-5:1.1: PM: resume from 2, parent 7-5 still 2 [ 1.419610] usb_device usbdev7.2: PM: resume from 0, parent 7-5 still 2 [ 1.419616] sd 0:0:0:0: [sda] Starting disk [ 2.099755] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.120238] ata1.00: configured for UDMA/133 [ 2.120272] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 2.120283] sd 0:0:0:0: [sda] Write Protect is off [ 2.120285] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.120297] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.442058] Restarting tasks ... <6>usb 7-5: USB disconnect, address 2 [ 2.473839] done. [ 2.553768] usb 7-5: new high speed USB device using ehci_hcd and address 3 [ 2.697179] usb 7-5: configuration #1 chosen from 1 choice [ 2.697373] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004) [ 3.630891] ieee80211_crypt: registered algorithm 'NULL' [ 3.633375] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 3.633380] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 3.643004] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 3.643009] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 3.644897] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 3.644923] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 3.645380] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 4.556832] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 4.800032] udev: renamed network interface eth0 to eth1 [ 7.280607] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 7.280612] Copyright (c) 1999-2006 Intel Corporation. [ 7.281108] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 7.281127] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 7.301719] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 7.308122] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1c:25:18:c8:1b [ 7.398176] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 7.418873] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.043332] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.174484] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.044529] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 19.940960] eth1: no IPv6 routers present [ 27.673598] kjournald starting. Commit interval 5 seconds [ 27.674025] EXT3 FS on sda3, internal journal [ 27.674076] EXT3-fs: mounted filesystem with ordered data mode.