[ 0.000000] Linux version 2.6.22-14-generic (buildd@king) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 02:46:46 UTC 2008 (Ubuntu 2.6.22-14.52-generic) [ 0.000000] Command line: root=/dev/sda3 ro quiet splash irqpoll [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003e6b0000 (usable) [ 0.000000] BIOS-e820: 000000003e6b0000 - 000000003e6cd000 (ACPI data) [ 0.000000] BIOS-e820: 000000003e6cd000 - 000000003e700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003e700000 - 000000003f000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 255664) 1 entries of 3200 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F68D0 checksum 0 [ 0.000000] ACPI: RSDP 000F68D0, 0024 (r2 LENOVO) [ 0.000000] ACPI: XSDT 3E6BC8FD, 0094 (r1 LENOVO TP-7L 1210 LTP 0) [ 0.000000] ACPI: FACP 3E6BCA00, 00F4 (r3 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 3E6BCE0C, FD64 (r1 LENOVO TP-7L 1210 MSFT 3000000) [ 0.000000] ACPI: FACS 3E6E5000, 0040 [ 0.000000] ACPI: SSDT 3E6BCBB4, 0258 (r1 LENOVO TP-7L 1210 MSFT 3000000) [ 0.000000] ACPI: ECDT 3E6CCB70, 0052 (r1 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI: TCPA 3E6CCBC2, 0032 (r2 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI: APIC 3E6CCBF4, 0068 (r1 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI: MCFG 3E6CCC5C, 003C (r1 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI: HPET 3E6CCC98, 0038 (r1 LENOVO TP-7L 1210 LNVO 1) [ 0.000000] ACPI: SLIC 3E6CCDF0, 0176 (r1 LENOVO TP-7L 1210 LTP 0) [ 0.000000] ACPI: BOOT 3E6CCF66, 0028 (r1 LENOVO TP-7L 1210 LTP 1) [ 0.000000] ACPI: ASF! 3E6CCF8E, 0072 (r16 LENOVO TP-7L 1210 PTL 1) [ 0.000000] ACPI: SSDT 3E6E2CAA, 061E (r1 LENOVO TP-7L 1210 INTL 20050513) [ 0.000000] ACPI: SSDT 3E6E32C8, 025F (r1 LENOVO TP-7L 1210 INTL 20050513) [ 0.000000] ACPI: SSDT 3E6E3527, 04F7 (r1 LENOVO TP-7L 1210 INTL 20050513) [ 0.000000] ACPI: SSDT 3E6E3A1E, 01D8 (r1 LENOVO TP-7L 1210 INTL 20050513) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003e6b0000 [ 0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 255664) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000003e6b0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 157 [ 0.000000] 0: 256 -> 255664 [ 0.000000] On node 0 totalpages: 255565 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1126 pages reserved [ 0.000000] DMA zone: 2815 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3439 pages used for memmap [ 0.000000] DMA32 zone: 248129 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f000000:b1000000) [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 250944 [ 0.000000] Kernel command line: root=/dev/sda3 ro quiet splash irqpoll [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 18.000681] time.c: Detected 1728.992 MHz processor. [ 18.002451] Console: colour VGA+ 80x25 [ 18.002476] Checking aperture... [ 18.002491] Calgary: detecting Calgary via BIOS EBDA area [ 18.002493] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 18.016587] Memory: 996400k/1022656k available (2274k kernel code, 25860k reserved, 1185k data, 296k init) [ 18.016642] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 18.094843] Calibrating delay using timer specific routine.. 3478.61 BogoMIPS (lpj=6957233) [ 18.094884] Security Framework v1.0.0 initialized [ 18.094894] SELinux: Disabled at boot. [ 18.095024] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 18.095862] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 18.096280] Mount-cache hash table entries: 256 [ 18.096455] CPU: L1 I cache: 32K, L1 D cache: 32K [ 18.096459] CPU: L2 cache: 1024K [ 18.096462] CPU 0/0 -> Node 0 [ 18.096464] using mwait in idle threads. [ 18.096472] CPU0: Thermal monitoring enabled (TM1) [ 18.096487] SMP alternatives: switching to UP code [ 18.096801] Early unpacking initramfs... done [ 18.482939] ACPI: Core revision 20070126 [ 18.483029] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 18.626106] Using local APIC timer interrupts. [ 18.683922] result 8312452 [ 18.683924] Detected 8.312 MHz APIC timer. [ 18.686605] Brought up 1 CPUs [ 18.686811] NET: Registered protocol family 16 [ 18.686901] ACPI: bus type pci registered [ 18.686911] PCI: Using configuration type 1 [ 18.688296] ACPI: EC: Found ECDT [ 18.770018] ACPI: Interpreter enabled [ 18.770022] ACPI: (supports S0 S3 S4 S5) [ 18.770042] ACPI: Using IOAPIC for interrupt routing [ 18.780163] ACPI: EC: GPE=0x12, ports=0x66, 0x62 [ 18.780217] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.780225] PCI: Probing PCI hardware (bus 00) [ 18.784754] PCI: Transparent bridge - 0000:00:1e.0 [ 18.785121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.785360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 18.785503] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 18.785643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 18.785784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 18.785927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 18.786069] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 18.789992] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 18.790232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 18.790468] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 18.790783] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 18.791017] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 18.791250] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 18.791484] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 18.791717] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 18.792120] ACPI: Power Resource [PUBS] (on) [ 18.792138] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.792149] pnp: PnP ACPI init [ 18.792165] ACPI: bus type pnp registered [ 18.797278] pnp: PnP ACPI: found 11 devices [ 18.797281] ACPI: ACPI bus type pnp unregistered [ 18.797341] PCI: Using ACPI for IRQ routing [ 18.797344] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 18.797579] NET: Registered protocol family 8 [ 18.797581] NET: Registered protocol family 20 [ 18.797595] PCI-GART: No AMD northbridge found. [ 18.797602] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 18.797606] hpet0: 3 64-bit timers, 14318180 Hz [ 18.798720] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 18.798723] pnp: 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 18.798725] pnp: 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 18.798728] pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 18.798734] pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 18.798738] pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 18.798741] pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved [ 18.798744] pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved [ 18.799073] PCI: Bridge: 0000:00:1c.0 [ 18.799079] IO window: 2000-2fff [ 18.799092] MEM window: fc000000-fdffffff [ 18.799101] PREFETCH window: f8000000-f80fffff [ 18.799114] PCI: Bridge: 0000:00:1c.1 [ 18.799120] IO window: 3000-3fff [ 18.799133] MEM window: dc000000-df3fffff [ 18.799142] PREFETCH window: dfe00000-dfefffff [ 18.799155] PCI: Bridge: 0000:00:1c.2 [ 18.799160] IO window: 4000-4fff [ 18.799173] MEM window: d8000000-d9ffffff [ 18.799182] PREFETCH window: dfb00000-dfbfffff [ 18.799195] PCI: Bridge: 0000:00:1c.3 [ 18.799200] IO window: 5000-5fff [ 18.799213] MEM window: d4000000-d5ffffff [ 18.799222] PREFETCH window: df800000-df8fffff [ 18.799235] PCI: Bridge: 0000:00:1c.4 [ 18.799240] IO window: 6000-6fff [ 18.799253] MEM window: d0000000-d1ffffff [ 18.799263] PREFETCH window: df500000-df5fffff [ 18.799277] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 18.799279] IO window: 00007000-000070ff [ 18.799287] IO window: 00007400-000074ff [ 18.799297] PREFETCH window: f4000000-f7ffffff [ 18.799307] MEM window: 40000000-43ffffff [ 18.799316] PCI: Bridge: 0000:00:1e.0 [ 18.799321] IO window: 7000-afff [ 18.799334] MEM window: f8300000-fbffffff [ 18.799343] PREFETCH window: f4000000-f7ffffff [ 18.799412] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 18.799424] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.799481] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 18.799489] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.799545] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22 [ 18.799553] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 18.799602] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 [ 18.799610] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 18.799666] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20 [ 18.799676] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 18.799699] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 18.799712] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 18.799746] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 18.799755] PCI: Setting latency timer of device 0000:15:00.0 to 64 [ 18.799769] NET: Registered protocol family 2 [ 18.802506] Time: hpet clocksource has been installed. [ 18.838570] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 18.838914] TCP established hash table entries: 131072 (order: 9, 3145728 bytes) [ 18.841491] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 18.842439] TCP: Hash tables configured (established 131072 bind 65536) [ 18.842444] TCP reno registered [ 18.850692] checking if image is initramfs... it is [ 19.606406] Freeing initrd memory: 7200k freed [ 19.612895] Simple Boot Flag at 0x35 set to 0x1 [ 19.613323] audit: initializing netlink socket (disabled) [ 19.613338] audit(1235244887.400:1): initialized [ 19.615457] VFS: Disk quotas dquot_6.5.1 [ 19.615513] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 19.615610] io scheduler noop registered [ 19.615612] io scheduler anticipatory registered [ 19.615614] io scheduler deadline registered [ 19.615710] io scheduler cfq registered (default) [ 19.615726] Boot video device is 0000:00:02.0 [ 19.616728] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 19.616877] assign_interrupt_mode Found MSI capability [ 19.616880] Allocate Port Service[0000:00:1c.0:pcie00] [ 19.616917] Allocate Port Service[0000:00:1c.0:pcie02] [ 19.617122] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 19.617270] assign_interrupt_mode Found MSI capability [ 19.617272] Allocate Port Service[0000:00:1c.1:pcie00] [ 19.617304] Allocate Port Service[0000:00:1c.1:pcie02] [ 19.617502] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 19.617650] assign_interrupt_mode Found MSI capability [ 19.617652] Allocate Port Service[0000:00:1c.2:pcie00] [ 19.617684] Allocate Port Service[0000:00:1c.2:pcie02] [ 19.617875] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 19.618022] assign_interrupt_mode Found MSI capability [ 19.618024] Allocate Port Service[0000:00:1c.3:pcie00] [ 19.618053] Allocate Port Service[0000:00:1c.3:pcie02] [ 19.618321] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 19.618463] assign_interrupt_mode Found MSI capability [ 19.618466] Allocate Port Service[0000:00:1c.4:pcie00] [ 19.618497] Allocate Port Service[0000:00:1c.4:pcie02] [ 19.643729] Real Time Clock Driver v1.12ac [ 19.643830] hpet_resources: 0xfed00000 is busy [ 19.643874] Linux agpgart interface v0.102 (c) Dave Jones [ 19.643877] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 19.645065] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.645280] input: Macintosh mouse button emulation as /class/input/input0 [ 19.645358] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 19.654076] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.654083] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.654346] mice: PS/2 mouse device common for all mice [ 19.654484] TCP cubic registered [ 19.654556] NET: Registered protocol family 1 [ 19.654789] /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 19.654796] Freeing unused kernel memory: 296k freed [ 19.714229] input: AT Translated Set 2 keyboard as /class/input/input1 [ 20.820402] AppArmor: AppArmor initialized<5>audit(1235244888.608:2): type=1505 info="AppArmor initialized" pid=1178 [ 20.830177] fuse init (API version 7.8) [ 20.834419] Failure registering capabilities with primary security module. [ 20.849627] Monitor-Mwait will be used to enter C-1 state [ 20.849632] Monitor-Mwait will be used to enter C-2 state [ 20.849634] Monitor-Mwait will be used to enter C-3 state [ 20.849637] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 20.849642] ACPI: Processor [CPU0] (supports 8 throttling states) [ 20.849745] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] [ 20.851606] ACPI: Thermal Zone [THM0] (49 C) [ 20.853291] ACPI: Thermal Zone [THM1] (47 C) [ 21.375471] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 21.375475] Copyright (c) 1999-2006 Intel Corporation. [ 21.375534] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 21.375552] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 21.396194] usbcore: registered new interface driver usbfs [ 21.396218] usbcore: registered new interface driver hub [ 21.396242] usbcore: registered new device driver usb [ 21.396923] USB Universal Host Controller Interface driver v3.0 [ 21.426701] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1c:25:18:c8:1b [ 21.514158] SCSI subsystem initialized [ 21.518569] libata version 2.21 loaded. [ 21.595121] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 21.595150] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 21.595167] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 21.595173] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 21.595345] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 21.595396] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 21.595519] usb usb1: configuration #1 chosen from 1 choice [ 21.595543] hub 1-0:1.0: USB hub found [ 21.595549] hub 1-0:1.0: 2 ports detected [ 21.689745] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 [ 21.689763] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 21.689769] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 21.689789] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 21.689840] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 21.689938] usb usb2: configuration #1 chosen from 1 choice [ 21.689960] hub 2-0:1.0: USB hub found [ 21.689965] hub 2-0:1.0: 2 ports detected [ 21.694749] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 21.694766] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 21.694772] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 21.694794] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 21.694841] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 21.694934] usb usb3: configuration #1 chosen from 1 choice [ 21.694957] hub 3-0:1.0: USB hub found [ 21.694962] hub 3-0:1.0: 2 ports detected [ 21.699790] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 21.699806] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 21.699813] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 21.699836] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 21.699882] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 21.699975] usb usb4: configuration #1 chosen from 1 choice [ 21.700005] hub 4-0:1.0: USB hub found [ 21.700010] hub 4-0:1.0: 2 ports detected [ 21.704901] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 21.704918] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 21.704924] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 21.704951] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 21.704995] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 21.705087] usb usb5: configuration #1 chosen from 1 choice [ 21.705109] hub 5-0:1.0: USB hub found [ 21.705114] hub 5-0:1.0: 2 ports detected [ 21.712366] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 21.712548] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 21.712557] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 21.712617] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 21.712680] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 21.712695] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 [ 21.717023] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.717109] usb usb6: configuration #1 chosen from 1 choice [ 21.717134] hub 6-0:1.0: USB hub found [ 21.717140] hub 6-0:1.0: 4 ports detected [ 21.775168] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 [ 21.775337] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 21.775346] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 21.775396] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 21.775462] ehci_hcd 0000:00:1d.7: debug port 1 [ 21.775475] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 21.775490] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 [ 21.779889] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 21.779982] usb usb7: configuration #1 chosen from 1 choice [ 21.780007] hub 7-0:1.0: USB hub found [ 21.780013] hub 7-0:1.0: 6 ports detected [ 21.786101] ata_piix 0000:00:1f.1: version 2.11 [ 21.786130] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 [ 21.786181] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 21.786343] scsi0 : ata_piix [ 21.809394] scsi1 : ata_piix [ 21.809945] ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011c00 irq 14 [ 21.809949] ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011c08 irq 15 [ 21.821174] usb 7-5: new high speed USB device using ehci_hcd and address 2 [ 21.835663] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850, RB11, max UDMA/33 [ 21.858021] usb 7-5: configuration #1 chosen from 1 choice [ 21.879363] ata1.00: configured for UDMA/33 [ 21.879404] ata2: port disabled. ignoring. [ 21.880676] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850 RB11 PQ: 0 ANSI: 5 [ 21.882565] ahci 0000:00:1f.2: version 2.2 [ 21.882612] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 [ 21.882775] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match [ 21.896728] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 21.896733] Uniform CD-ROM driver Revision: 3.20 [ 21.896948] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 21.901141] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 21.953800] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode [ 21.953805] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 21.953815] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 21.953910] scsi2 : ahci [ 21.953988] ata3: SATA max UDMA/133 cmd 0xffffc20000602100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16 [ 21.969465] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 21.976105] ata3.00: ATA-8: SAMSUNG HM500LI, 2TF00_00, max UDMA7 [ 21.976108] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 21.984479] ata3.00: configured for UDMA/133 [ 21.984582] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM500LI 2TF0 PQ: 0 ANSI: 5 [ 21.984646] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 21.985901] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 21.985915] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 22.046138] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 22.046155] sd 2:0:0:0: [sda] Write Protect is off [ 22.046157] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.046170] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.046227] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 22.046234] sd 2:0:0:0: [sda] Write Protect is off [ 22.046236] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.046248] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.046253] sda:<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 22.528778] sda1 sda2 sda3 [ 22.535968] sd 2:0:0:0: [sda] Attached SCSI disk [ 22.831772] kjournald starting. Commit interval 5 seconds [ 22.831784] EXT3-fs: mounted filesystem with ordered data mode. [ 23.315322] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c200034c85e] [ 33.364022] agpgart: Detected an Intel 965GM Chipset. [ 33.364318] agpgart: Detected 7676K stolen memory. [ 33.378267] agpgart: AGP aperture is 256M @ 0xe0000000 [ 33.844106] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 33.846460] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.309727] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6] [ 34.437645] Yenta: ISA IRQ mask 0x04b8, PCI irq 16 [ 34.437652] Socket status: 30000006 [ 34.437656] pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff [ 34.437944] pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff [ 34.437947] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 34.601870] input: PC Speaker as /class/input/input2 [ 34.628165] ieee80211_crypt: registered algorithm 'NULL' [ 34.630705] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 34.630709] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 34.699683] Linux video capture interface: v2.00 [ 34.732524] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1 [ 34.732529] ipw3945: Copyright(c) 2003-2006 Intel Corporation [ 34.733192] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 34.733210] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 34.763236] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 34.783655] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:1004) [ 34.786683] usbcore: registered new interface driver uvcvideo [ 34.786688] USB Video Class driver (v0.1.0) [ 34.953071] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 34.953077] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 34.994897] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 35.121687] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 [ 35.121890] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 36.119460] lp: driver loaded but no devices found [ 36.198150] usbcore: registered new interface driver usbserial [ 36.199404] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 36.200818] usbcore: registered new interface driver usbserial_generic [ 36.200824] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 36.205183] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS [ 36.206460] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5 [ 36.207716] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0 [ 36.209325] usbcore: registered new interface driver visor [ 36.209331] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver [ 36.292952] Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k [ 36.597530] ACPI: AC Adapter [AC] (on-line) [ 36.600523] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) [ 37.037621] EXT3 FS on sda3, internal journal [ 37.237619] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 38.120179] audit(1235244909.709:3): type=1505 operation="profile_load" info="failed to unpack profile" name="/usr/lib/cups/backend/cups-pdf" pid=4190 [ 38.179665] audit(1235244909.769:4): type=1505 operation="profile_load" info="failed to unpack profile" name="/usr/sbin/mysqld" pid=4194 [ 38.399092] ip_tables: (C) 2000-2006 Netfilter Core Team [ 39.915036] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 40.058519] ACPI: Battery Slot [BAT0] (battery present) [ 40.125864] input: Power Button (FF) as /class/input/input4 [ 40.129972] ACPI: Power Button (FF) [PWRF] [ 40.146672] input: TPPS/2 IBM TrackPoint as /class/input/input6 [ 40.192168] input: Lid Switch as /class/input/input5 [ 40.195914] ACPI: Lid Switch [LID] [ 40.227136] input: Sleep Button (CM) as /class/input/input7 [ 40.230731] ACPI: Sleep Button (CM) [SLPB] [ 40.261606] ACPI: ACPI Dock Station Driver [ 40.265275] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay [ 40.265283] ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler [ 40.265311] ACPI: Error installing bay notify handler [ 40.265315] ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added [ 40.310378] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 40.313449] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 42.218356] NET: Registered protocol family 10 [ 42.218454] lo: Disabled Privacy Extensions [ 43.383583] Failure registering capabilities with primary security module. [ 43.848876] ppdev: user-space parallel port driver [ 56.174954] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 56.174961] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 56.174963] thinkpad_acpi: ThinkPad EC firmware 7KHT22WW-1.06 [ 57.699817] QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard [ 57.701601] KQEMU installed, max_locked_mem=501948kB. [ 58.019015] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 58.019019] vboxdrv: Successfully done. [ 60.155065] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 60.233429] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 60.307371] Bluetooth: Core ver 2.11 [ 60.307470] NET: Registered protocol family 31 [ 60.307472] Bluetooth: HCI device and connection manager initialized [ 60.307477] Bluetooth: HCI socket layer initialized [ 60.331521] Bluetooth: L2CAP ver 2.8 [ 60.331525] Bluetooth: L2CAP socket layer initialized [ 60.577432] Bluetooth: RFCOMM socket layer initialized [ 60.577510] Bluetooth: RFCOMM TTY layer initialized [ 60.577512] Bluetooth: RFCOMM ver 1.8 [ 62.682671] openafs: module license 'http://www.openafs.org/dl/license10.html' taints kernel. [ 62.692870] Found system call table at 0xffffffff80445aa0 (pattern scan) [ 62.834342] Found 32-bit system call table at 0xffffffff80446db0 (pattern scan) [ 63.209389] Starting AFS cache scan...found 25 non-empty cache files (0%). [ 65.763727] afs: Lost contact with volume location server 10.1.1.12 in cell linuxbox.com [ 65.763733] afs: Lost contact with volume location server 10.1.1.12 in cell linuxbox.com [ 66.562894] afs: Lost contact with volume location server 10.1.1.8 in cell linuxbox.com [ 66.562900] afs: Lost contact with volume location server 10.1.1.8 in cell linuxbox.com [ 69.004905] [drm] Initialized drm 1.1.0 20060810 [ 69.008448] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 69.013620] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 105.482590] NET: Registered protocol family 17 [ 109.112876] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 112.552118] eth1: no IPv6 routers present