<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=UTF-8" http-equiv="Content-Type"> </head> <body bgcolor="#ffffff" text="#000000"> Dan Nicholson wrote: <blockquote cite="mid:91705d080903171208hf856cb1k6f140cff9d5d48da@mail.gmail.com" type="cite"> <pre wrap="">On Thu, Feb 26, 2009 at 4:08 AM, Donald Harden <a class="moz-txt-link-rfc2396E" href="mailto:chedbh@langate.gsu.edu"><chedbh@langate.gsu.edu></a> wrote: </pre> <blockquote type="cite"> <pre wrap="">Hello, I have the following: HP Pavilion dv7 laptop with an Intel Core2 Duo T9400 and 4 GB of RAM Fedora 10 2.6.27.15-170.2.24.fc10.x86_64 pm-utils-1.2.2.1-2.fc10 hal-0.5.12-14.20081027git.fc10 Everything runs great including suspending, hibernating and resuming except that when the laptop resumes from a suspend or hibernation there is no battery info: {0}duder:/home/don > cat /proc/acpi/battery/BAT0/alarm present: no {0}duder:/home/don > cat /proc/acpi/battery/BAT0/info present: no {0}duder:/home/don > cat /proc/acpi/battery/BAT0/state present: no Before a suspend or hibernation and resume the battery info is as expected: {0}duder:/home/don/bin > cat /proc/acpi/battery/BAT0/info present: yes design capacity: 5100 mAh last full capacity: 4800 mAh battery technology: rechargeable design voltage: 14400 mV design capacity warning: 240 mAh design capacity low: 144 mAh capacity granularity 1: 264 mAh capacity granularity 2: 3780 mAh model number: Primary serial number: battery type: Lion OEM info: Hewlett-Packard It does not matter if the laptop is running on AC power or the battery Booting with every combination of turning acpid on or off and turning the pci=noapci kernel flag on or off has no effect. I spent a good deal of time Googling and searching the pm-utils archives but found no solution. I've also tried the suggestions on the HAL Quirk site, <a class="moz-txt-link-freetext" href="http://people.freedesktop.org/~hughsient/quirk/index.html">http://people.freedesktop.org/~hughsient/quirk/index.html</a> but still no joy. Any ideas to get my battery info after a resume? </pre> </blockquote> <pre wrap=""> I just noticed this message. Don't know if you found an answer in the meantime. This is almost certainly a kernel bug. pm-utils can work around some things in userspace, but eventually it just tells the kernel to suspend and hope it resumes in a usable state. I would suggest trying a newer kernel version at least. Probably advisable to open a Fedora bug. If that doesn't get you anywhere, you can try the vanilla kernel.org kernels and contacting lkml.org, <a class="moz-txt-link-abbreviated" href="mailto:linux-acpi@kernel.org">linux-acpi@kernel.org</a> and/or kernel.org bugzilla. Also, you may want to look at dmesg to see if there's any messages from the acpi subsystem. -- Dan _______________________________________________ Pm-utils mailing list <a class="moz-txt-link-abbreviated" href="mailto:Pm-utils@lists.freedesktop.org">Pm-utils@lists.freedesktop.org</a> <a class="moz-txt-link-freetext" href="http://lists.freedesktop.org/mailman/listinfo/pm-utils">http://lists.freedesktop.org/mailman/listinfo/pm-utils</a> </pre> </blockquote> Hi Dan, thanks for your response. I should have mentioned earlier that dmseg gave nothing useful: Before a suspend: {0}duder:/home/don > dmesg |grep acpi ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpi device:04: registered as cooling_device3 acpi device:09: registered as cooling_device4 After a resume: {0}duder:/home/don > dmesg |grep acpi ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpi device:04: registered as cooling_device3 acpi device:09: registered as cooling_device4 I am running the latest Fedora x86-64 kernel, 2.6.26.6-79.fc9.x86_64. I haven't tried a vanilla kernel; maybe I should, but I'm not hopeful. I'm guessing it's new and not-yet-supported hardware. I'll take your advise and open a bug report with Fedora. Don <pre class="moz-signature" cols="72">-- Don Harden <a class="moz-txt-link-abbreviated" href="mailto:harden@Gsu.EDU">harden@Gsu.EDU</a> Department of Chemistry 564 NSC Georgia State University ph: (404) 413 5555 Atlanta, Ga. 30302-4098 fax: (404) 413 5505 </pre> </body> </html>