[pulseaudio-tickets] [PulseAudio] #206: pulseaudio unloads module-oss immediately at startup

Fri Jan 4 05:18:43 PST 2008

#206: pulseaudio unloads module-oss immediately at startup
--------------------------+-------------------------------------------------
 Reporter:  sjoerd        |       Owner:  lennart
     Type:  defect        |      Status:  new    
 Priority:  normal        |   Milestone:         
Component:  module-oss-*  |    Severity:  normal 
 Keywords:                |  
--------------------------+-------------------------------------------------
 Forwarded from debian bug 452019: http://bugs.debian.org/cgi-
 bin/bugreport.cgi?bug=452019

 I'm tring to get pulseaudio running on Sid AMD64 using 4front-tech's OSS
 sound driver for an Audigy 2 ZS Platinum Pro card. I have uncommented
 the OSS line (not the mmapped line because this has been apparently
 removed upstream?) in default.pa but pulseaudio drops the sound card
 immediately. I do not rule out user/config error as I can't really find
 much about the OSS and pulseaudio combination.

 My default.pa is the standard config but with the following 3 lines
 uncommented:

 load-module module-oss device="/dev/dsp" sink_name=output
 source_name=input
 set-default-sink output
 set-default-source input

 In daemon.conf I have set high-priority to 1

 My user is a member of audio, pulse, pulse-rt and pulse-access.

 I then do "pulseaudio --log-level=debug" and get:

 I: core-util.c: Successfully gained nice level -11.
 I: main.c: Page size is 4096 bytes
 I: main.c: Dude, your kernel stinks! The chef's recommendation today is
 Linux with high-resolution timers enabled!
 D: oss-util.c: capabilities: BATCH DUPLEX MMAP MULTI REALTIME TRIGGER
 I: module-oss.c: Hardware name is 'SB Audigy2 main'.
 I: module-oss.c: Device opened in O_RDWR mode.
 I: module-oss.c: Input -- 16 fragments of size 4096.
 I: module-oss.c: Output -- 4 fragments of size 4096.
 D: module-oss.c: Successfully mmap()ed input buffer.
 I: source.c: Created source 0 "input" with sample spec "s16le 2ch
 44100Hz"
 D: module-oss.c: Successfully mmap()ed output buffer.
 I: sink.c: Created sink 0 "output" with sample spec "s16le 2ch 44100Hz"
 I: source.c: Created source 1 "output.monitor" with sample spec "s16le
 2ch 44100Hz"
 D: module-oss.c: Found hardware mixer track for playback.
 D: module-oss.c: Found hardware mixer track for recording.
 D: oss-util.c: Read mixer settings: 0: 100% 1: 100%
 D: oss-util.c: Read mixer settings: 0:  75% 1:  75%
 D: module-oss.c: Thread starting up
 I: core-util.c: Successfully enabled SCHED_FIFO scheduling for thread.
 D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+29
 D: module-oss.c: trigger
 D: module-oss.c: trigger: 2
 E: module-oss.c: DSP shutdown.
 D: module-oss.c: trigger
 D: module-oss.c: trigger: 3
 I: module.c: Loaded "module-oss" (index: #0; argument:
 "device="/dev/dsp" sink_name=output source_name=input").
 D: cli-command.c: Checking for existance of
 '/usr/lib/pulse-0.9/modules//module-hal-detect.so': success
 I: module-hal-detect.c: Trying capability alsa
 I: module-hal-detect.c: Trying capability oss
 I: module-hal-detect.c: Loaded 0 modules.
 I: module.c: Loaded "module-hal-detect" (index: #1; argument: "").
 I: module.c: Loaded "module-esound-protocol-unix" (index: #2; argument:
 "socket="/tmp/.esd/socket"").
 I: protocol-native.c: loading cookie from disk.
 I: module.c: Loaded "module-native-protocol-unix" (index: #3; argument:
 "").
 I: module-volume-restore.c: starting with empty ruleset.
 I: module.c: Loaded "module-volume-restore" (index: #4; argument: "").
 I: module.c: Loaded "module-default-device-restore" (index: #5;
 argument: "").
 I: module.c: Loaded "module-rescue-streams" (index: #6; argument: "").
 D: cli-command.c: Checking for existance of
 '/usr/lib/pulse-0.9/modules//module-x11-publish.so': success
 D: module-x11-publish.c: using already loaded auth cookie.
 I: module.c: Loaded "module-x11-publish" (index: #7; argument: "").
 D: cli-command.c: Checking for existance of
 '/usr/lib/pulse-0.9/modules//module-gconf.so': success
 D: module-gconf.c: Loading module 'module-native-protocol-tcp' with args
 'auth-anonymous=1' due to GConf configuration.
 I: protocol-native.c: using already loaded auth cookie.
 I: protocol-native.c: using already loaded auth cookie.
 I: module.c: Loaded "module-native-protocol-tcp" (index: #8; argument:
 "auth-anonymous=1").
 D: module-gconf.c: Loading module 'module-esound-protocol-tcp' with args
 'auth-anonymous=1' due to GConf configuration.
 I: module.c: Loaded "module-esound-protocol-tcp" (index: #9; argument:
 "auth-anonymous=1").
 D: module-gconf.c: Loading module 'module-zeroconf-publish' with args ''
 due to GConf configuration.
 D: module-zeroconf-publish.c: Publishing services in Zeroconf
 D: module-zeroconf-publish.c: Successfully created entry group for
 haze at chaosx: OSS PCM on /dev/dsp (SB Audigy2 main) via DMA.
 D: module-zeroconf-publish.c: Successfully created entry group for
 haze at chaosx: OSS PCM on /dev/dsp (SB Audigy2 main) via DMA.
 I: module.c: Loaded "module-zeroconf-publish" (index: #10; argument:
 "").
 I: module.c: Loaded "module-gconf" (index: #11; argument: "").
 D: core-subscribe.c: dropped redundant event.
 I: main.c: Daemon startup complete.
 D: module-hal-detect.c: dbus: interface=org.freedesktop.DBus,
 path=/org/freedesktop/DBus, member=NameAcquired
 I: module.c: Unloading "module-oss" (index: #0).
 D: module-rescue-streams.c: No sink inputs to move away.
 D: module-zeroconf-publish.c: Removing entry group for haze at chaosx: OSS
 PCM on /dev/dsp (SB Audigy2 main) via DMA.
 D: module-rescue-streams.c: No source outputs to move away.
 D: module-rescue-streams.c: No source outputs to move away.
 D: module-zeroconf-publish.c: Removing entry group for haze at chaosx: OSS
 PCM on /dev/dsp (SB Audigy2 main) via DMA.
 D: module-oss.c: Thread shutting down
 I: sink.c: Freeing sink 0 "output"
 I: source.c: Freeing source 1 "output.monitor"
 I: source.c: Freeing source 0 "input"
 I: module.c: Unloaded "module-oss" (index: #0).
 I: module-zeroconf-publish.c: Successfully established main service.
 I: client.c: Created 0 "Native client (UNIX socket client)"
 I: protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
 I: protocol-native.c: Enabled SHM for new connection
 I: client.c: Client 0 changed name from "Native client (UNIX socket
 client)" to "PulseAudio Manager"

 END

 That's as far as I get with pulseaudio. If you need more info, please
 don't hesitate to contact me.

 Regards,

 Matthew

-- 
Ticket URL: <http://pulseaudio.org/ticket/206>
PulseAudio <http://pulseaudio.org/>
The PulseAudio Sound Server