[pulseaudio-tickets] [PulseAudio] #689: Sound Recording not working with ENS1371 sound card with default settings with PulseAudio 0.9.14

[PulseAudio]

#689: Sound Recording not working with ENS1371 sound card with default settings
with PulseAudio 0.9.14
-------------------------------------------------+--------------------------
 Reporter:  bbhavsar                             |       Owner:  lennart
     Type:  defect                               |      Status:  new    
Milestone:                                       |   Component:  daemon 
 Keywords:  "Sound Recording", ENS1371,  VMware  |  
-------------------------------------------------+--------------------------
 Setup: Ubuntu 9.04

 Sound Card: ENS1371

 Alsa Debug Information: http://www.alsa-
 project.org/db/?f=7d0fa2464d821ff39725b3f1334d3fbc8d1213ff

 Case 1: Default Setting.

 arecord -t wav -f cd temp.wav

 No sound gets recorded.

 Case 2: Sound device explicitly specified.

 arecord -Dfront:CARD=AudioPCI,DEV=0 -t wav -f cd temp.wav

 Sound recording works fine.

 However if PulseAudio is removed (sudo apt-get install pulseaudio), sound
 recording works fine in both above mentioned cases.

 This problem is seen with a physical ENS1371 sound card running  Ubuntu
 9.04+ natively. (Sound recording problem is not observed with Ubuntu 8.04
 with PulseAudio version 0.9.10)

 Since VMware virtualizes ENS1371 sound card the same problem is seen with
 guest operating systems (Ubuntu 9.04, Ubuntu 9.10, OpenSuse 11.2 etc.)
 running under VMware as well.

 In the error Case 1, it is observed that the ADC channel in ENS1371 is not
 enabled at all.

 Let me know if more debugging information is required.

 Thanks,

 Bankim.

-- 
Ticket URL: <http://pulseaudio.org/ticket/689>
PulseAudio <http://pulseaudio.org/>
The PulseAudio Sound Server