[pulseaudio-tickets] [Bug 93946] Changing device profile to HDMI is reset to default after monitor goes into powersave

[bugzilla-daemon at freedesktop.org]

https://bugs.freedesktop.org/show_bug.cgi?id=93946

--- Comment #39 from Raymond <superquad.vortex2 at gmail.com> ---
Do you mean that you plug your headphone into green line out jack


Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo 
Amp-Out Control: name="Line Out Playback Switch", index=0, device=0 
ControlAmp: chs=3, dir=Out, idx=0, ofs=0 
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 
Amp-Out vals: [0x00 0x00] Pincap 0x0001003e: IN OUT HP EAPD Detect Trigger EAPD
0x2: EAPD 
Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0 
Pin-ctls: 0x40: OUT Unsolicited: tag=01, enabled=1 
Power states: D0 D1 D2 D3 EPSS 
Power: setting=D0, actual=D0 
Connection: 1 0x0c

-- 
You are receiving this mail because:
You are the QA Contact for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/pulseaudio-bugs/attachments/20160206/c6403aa8/attachment.html>