<html> <head> <base href="https://bugs.freedesktop.org/" /> </head> <body> <div> <a class="bz_bug_link bz_status_NEW " title="NEW - Headphones selected on first run while unplugged and other ports are available" href="https://bugs.freedesktop.org/show_bug.cgi?id=87002#c10">Comment # 10</a> on <a class="bz_bug_link bz_status_NEW " title="NEW - Headphones selected on first run while unplugged and other ports are available" href="https://bugs.freedesktop.org/show_bug.cgi?id=87002">bug 87002</a> from <a class="email" href="mailto:superquad.vortex2@gmail.com" title="Raymond <superquad.vortex2@gmail.com>"> Raymond</a> <pre> In PulseAudio ports will show up with the following names: Headphones - analog-output-headphones Headset mic - analog-input-microphone-headset Jack in mic-in mode - analog-input-microphone However, since regular mics also show up as analog-input-microphone, we need to check for certain controls on alsa mixer level too, to know if we deal with a separate mic jack, or a multi-function jack with a mic-in mode (also called "headphone mic"). We check for the following names: Headphone Mic Jack - indicates headphone and mic-in mode share the same jack, i e, not two separate jacks. Hardware cannot distinguish between a headphone and a mic. Headset Mic Phantom Jack - indicates headset jack where hardware can not distinguish between headphones and headsets Headset Mic Jack - indicates headset jack where hardware can distinguish between headphones and headsets. There is no use popping up a dialog in this case, unless we already need to do this for the mic-in mode. yours seem different from pa_backend.c Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00003724: IN Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the QA Contact for the bug.</li> <li>You are the assignee for the bug.</li> </ul> </body> </html>